Used Barford Sxr 3000 for sale (6,730)

Condition: new, Year of construction: 2024, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Duelnehv Hkao Hkq Aet Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED Duolnewidy Tj Hkq Aet RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: refurbished (used), Used Refurbished Giusti model Pharmix 120 litre capacity 316 stainless steel jacketed process vessel. Internal approximately 510mm diameter X 585mm straight side. Has clamped dished top and welded dished bottom heads. Internal rated full vacuum/1.38 bar working pressure. Has 321 stainless steel external jacket rated 3.45 bar working pressure. Vertical agitator with PTFE wall scraper blades direct driven by 1.1 kW, 415 volt, 3/50, 1420 rpm motor via Supaflex enclosed VS drive rated 600-3000 rpm motor and Electro power gears type ESRV2 gearbox rated 34.1 reduction ratio. Bottom entry homogeniser direct driven by a pole changing 2 speed 3.7/4.4 kW, 400 volt, 3/50, 1425/2890 rpm motor. Mounted in stand with hand hydraulic lift for raise and lower of top dished head. Has approximately 38mm (1.5") centre bottom discharge with valve. Designed for producing liquids, creams and semi solids under sterile conditions. This unit has recently been refurbished and is immediately available for sale. Here at Perry Process Equipment Ltd our engineering workshop aids us in being a premium supplier of high quality used process equipment. We can carry out a range of services from basic equipment testing right up to mechanical refurbishment, for a broad range of industries. Contact us for further details about the refurbishment work carried out on this unit and to request a free no-obligation quotation. Duoln Hkqsgcb A Es Aet Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available; Perry has warehouses in the UK, USA, Poland, Czech Republic, Russia and Ukraine to support our customers worldwide. View our entire inventory of process equipment on our website and request a no-obligation quotation on any of our items.

Condition: ready for operation (used), Year of construction: 1977, Functionality: fully functional, USED Webster Bennett CNC VTL with twin rams and Siemens 820T Year of Manufacture 1977. Retrofitted in 1995 – SERIAL NUMBER 6826/1 MACHINE CONSTRUCTION & FEATURES  TWIN RAM TYPE 2-AXIS VERTICAL BORING & TURNING MACHINE.  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY HARDENED & GROUND SLIDEWAYS TO PROVIDE INCREASED STABILITY & RIGIDITY.  3 STEP AUTOMATIC GEAR CHANGE.  SIEMENS 820T CNC CONTROL. INCLUDED FACTORY FITTED MACHINE OPTIONS  MANUAL 4-JAW COMBINATION CHUCK WITH 4 MANUAL ADJUSTABLE JAW BODIES  CHIP CONVEYOR & CHIP BUCKET INCLUDED TOOLHOLDERS  SET OF CAPTO C6 TURNING HEADS CAPACITY Maximum Turning Diameter Ø 3,650 MM Maximum Turning Height 2,130 MM Maximum Workpiece Weight 20,000 KGS TABLE Table Diameter Ø 3,050 MM Table Speed 0~ 60 RPM Table Speed Range AUTOMATIC 3 STEP RAM HEAD Tool Size 32 MM² Spindle Taper ISO 7/24 #50 Ram Cross Section 220 x 220 MM TRAVEL & FEEDRATE Left hand ram travel – U Axis (Saddle Horizontal) 3,911 MM Left hand ram travel – X Axis (Saddle Horizontal) 3,911 MM Z-Axis Travel (Ram Vertical) 965 MM Vertical Travel of Crossrail 1200 MM Maximum X / Z-Axis Cutting Feedrate 0-3,000 MM / MIN X / Z-Axis Rapid Feedrate 3,000 MM / MIN POWER SOURCE Input Power Supply 415V / 50HZ / 3PH DIMENSIONS & WEIGHT Djln Hkswhqmdsq Ajut Height 5,650 MM External Width (With Chip Conveyor) 6,000 MM External Depth 4,700 MM Weight 48,800 KGS

Condition: used, Field of application: Internal logistics Serial number: B3A2xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19880 Dujlev U Staen Hkq Aet Specifications: - 5395 Hours - 4500 kg - Lifting capacity of 3000 kg - Repair item - Ready for delivery Description: We have a Hyster H60F Gas truck Repair item for sale. The forklift is a Repair item as it is hanging on the clutch. Apart from this, it works as it should. But some additional costs must be considered. Ready for delivery

Condition: used, machine/vehicle number: 007789, Max. panel width: 920 mm Max. panel length: 3000 mm Dolnsvzc Syj Hkq Ajut No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), Machine Description This machine is in very good condition. It was made in France. Specifications: Glass Thickness: 3 - 25 mm Minimum Glass Size: 80 x 120 mm Maximum Glass Size: 3000 x 3000 mm (can be larger) Speed: 0.4 - 4.2 m/min Dimensions: 5800 x 1600 x 2500 mm Duslnewig Awj Hkq Ajt Weight: 2500 kg

Condition: used, HANWHA XP12 SWISS TYPE TURNING LATHE MAKE HANWHA-HANEX, MADE IN KOREA MODEL XP 12 YEAR 1996 CONTROL FANUC OT-C MAX MACHINING LENGTH 140.0 mm MAX HOLE DIA 6.0 mm SPINDLE HOLE DIA 14.0 mm SPINDLE RANGE 100 – 10,000 RPM SPINDLE MOTOR 1.5/2.2 kW TOOL NUMBERS 5+3 TOOLS RAPID FEEDRATE X AXIS: 15m/min Y AXIS: 15m/min Z AXIS: 15m/min MACHINE DIMS 1150 x 830 x 1540 mm MACHINE WEIGHT 900 KGS PLUS Duelnjwidymj Hkq Ajt 3000.0 mm FULL LENGTH MAGAZINE BARFEED TOOL HOLDERS COLLETS SET OF MANUALS COMPLETE

Condition: good (used), mileage: 778,804 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,490 mm, first registration: 07/2022, loading space length: 4,410 mm, loading space width: 1,780 mm, loading space height: 1,950 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 235/65R16, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, trailer coupling, = Additional Options and Accessories = - Electric Windows - Electric Mirrors - None - Partition - Central Locking = Remarks = Configuration: 4x2, Payload: 1326 kg, Unladen Weight: 2174 kg, Gross Weight: 3500 kg, Unbraked Towing Capacity: 750 kg, Braked Center Axle Towing Capacity: 3000 kg, Trailer Hitch, Cabin Type: Single Cab, Cruise Control, Air Conditioning, Number of Airbags: 1, Parking Assistance: None, Electric Windows, Electric Mirrors, Partition, Radio/Cassette, GPS Navigation, Color: White, Heated Mirrors, Rear View Camera, Lighting Type: LED Lamp, Speed Limiter, Lane Keeping Assist, Climate Control, Bluetooth, Engine Power: 130 kW (174 Hp), Fuel: Diesel, Euro: 6, Drive Technology: Timing Belt, Transmission Type: Automatic, Speed Limiter, Power Steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 2, Seat upholstery: Fabric, Seat adjustment: Manual, AC automatic EURO6, CarPlay cruise control, Tire type: All-season tires = Further information = General information Number of doors: 1 License plate: VRH-35-V Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Axle 1: Tire profile left: 6 mm; Tire profile right: 5 mm; Suspension: Coil springs Axle 2: Tire profile left: 7 mm; Tire profile right: 7 mm; Suspension: Leaf spring Dimensions Dimensions (L x W x H): 710 x 205 x 275 cm Weight Curb weight: 2,174 kg Payload: 1,326 kg GVW: 3,500 kg Functional Loading area height: 74 cm Maintenance General technical inspection (APO): inspected until July 2025 Condition Technical condition: good Aesthetic condition: good Damage: none Number of keys: 2 = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support Deln Hewh I Dmjkq Ajut • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2000, machine/vehicle number: 2083, Base area: approx. 3000x6000 mm, with cutting bridge, with 2 cutting heads, transfer crushing table, table size: approx. 3000x8000 mm, tilting table for manual loading Delnswactye Hkq Ajut

Condition: new, Year of construction: 2024, Functionality: fully functional, laser power: 6,000 W, laser hours: 1,500 h, sheet thickness aluminum (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness copper (max.): 14 mm, sheet thickness brass (max.): 14 mm, warranty duration: 60 months, input voltage: 400 V, sheet thickness (max.): 25 mm, compressed air connection: 7 bar, Equipment: cooling unit, safety light barrier, Fiber laser cutting machine for all kinds of sheets. Equipped with automatic nozzle changing and one-click processing functions, the P series is competent for all cutting demands. The special fiber laser nozzle and cutting process ensure faster oxygen cutting of carbon steel, more gas-saving low-pressure nitrogen cutting of stainless steel, and better quality air cutting of carbon steel. The fiber laser heads are able to detect protruding obstacles to effectively reduce the damage rate and save the maintenance cost of the laser cutter. With one-click processing, one laser machine is capable of processing multiple sheets in batches with a single setting, achieving batch processing. Condition: New Laser type: Fiber laser Laser power: 6000W Duslnotrvpxj Hkq Ast Cutting area: 3048*1524mm - 6100*2500mm Cutting speed: 200m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Supported graphic format: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling mode: WATER COOLING Suction filter: ECO6 CTS 9 Kw Available for immediate delivery

Condition: used, Year of construction: 2007, operating hours: 9,600 h, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 2,420 mm, total length: 3,000 mm, total width: 1,400 mm, color: other, Empty weight: 6.504 kg Lifting capacity: 5.000 kg - Lifting capacity: 5000kg - Lifting height: 3300mm - Number of wheels: 4 Wheels - Overhead clearance: 2420mm - Attachment: 4th valve to fork carriage, Side-shift - Options: Work lights - Fork length: 1150mm - Free lift: 0mm - Mast: Duplex - Year: 2007 - Documentation available: No - Operating hours: 9600 - Battery voltage: 80V - Capacity: 930Ah - Inspection valid until: 04.2025 - Drive: Elektric - Transport dimensions: 3000mm x 1400mm x 2420mm (l x w x h) - Transport weight [kg]: 6504kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Deln Hkqjwh Sx Uj Ajut Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system Delewh Ulqon Hkq Asut *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Dueln Hkeukitxeq Ajt Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, Year of construction: 2007, x-travel 650 mm y-travel 550 mm z-travel 500 mm control Andronic tool taper HSK50 numbers of tools in magazin 57 spindle turning speed - stepless 0- 36.000 U/min size of pallet 400 x 400 mm total connected load 25 KVA feed stepless 0- 30000 mm/min rapid traverse 30 m/min total power requirement 17 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m 5 axes machining center with rotating and swivable table (A and C axe). Machine has a pallet changing system for 6 pallets and an ATC with 57 positions. Machine has not much working hours and a overhauled working spindle with HSK 50 Dusln Hewiik Dekq Ast reception. We will supply the machine with many holders.

Condition: used, Year of construction: 2000, Consisting of: Cutting/breaking table, make HEGLA, type: OPTIMAX 6032ES, weight: approx. 3500 kg, base area: approx. 3000x8000 mm, with cutting bridge and tilting table Dujlnewactaj Hkq Ast

Condition: used, Year of construction: 2011, operating hours: 30,410 h, Functionality: fully functional, machine/vehicle number: 304E1176, laser power: 2,000 W, laser hours: 30,410 h, High-end 2D laser cutting machine from Prima Industrie, model Zaphiro, manufactured in 2011, with a 2 kW laser power. Ideal for precision industrial work in carbon steel, stainless steel, and aluminum. Duolowhz Ifsn Hkq Ast

Condition: used, Year of construction: 2017, operating hours: 7,621 h, lifting height: 4,680 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, total height: 2,250 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Empty weight: 5.152 kg Lifting capacity: 3.000 kg Fork dimensions: 1.200 x 950 mm Price: On request - Lifting capacity: 3000kg - Lifting height: 4680mm Djln Hkqowh Swwo Aeut - Maximum fork width: 950mm - Number of wheels: 4 Wheels - Overhead clearance: 2250mm - Attachment: Side-shift, 4th valve to fork carriage - Options: Work lights, Free-lift - Fork length: 1200mm - Free lift: 1450mm - Mast: Triplex - Year: 2017 - Documentation available: No - CE mark available: Yes - Serial number: 516353H00033 - Operating hours: 7621 - Battery voltage: 80V - Brand/Type: Still - Capacity: 620Ah - Battery year of construction: 2017 - Drive: Elektric - Transport dimensions: 2500mm x 1200mm x 2250mm (l x w x h) - Transport weight [kg]: 5152kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm Dueln Hkqewh Ukys Aet burner heads 1 Control CNC workpiece weight 2510 kg traversing speed 200 m/min dimensions of the machine ca. 11599 x 3380 x 2718 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM

Condition: used, Year of construction: 2001, With positioning table Heidenhain controller - Year: 2001 - Documentation available: Yes - CE mark available: Yes - Serial number: 856 - Control: CNC - Motor power: 3.0kW - Spindle speed max.: 3000rpm - Model: omboormachine - Digital readout: Yes - Tool holder: SK30 - Table width: 310mm - Table length: 980mm - Drilling capacity: 32mm - Travel X: 450mm - Travel Y: 900mm - Spindle diameter: 30mm - Travel Z: 300mm Djln Howh Smlskq Asut - Max. reach: 322mm - Type digital: Ingebouwd - Number of axes: 3 - Spindle speed min.: 1rpm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Price: On request Overhead crane Demag Span: 8000mm Width: +/- 3000mm Crane 1: Year of construction: 1975 Lifting capacity: 6,300kg Lifting height: 5500mm Crane 2: Year of construction: 1981 Lifting capacity: 3,200kg Disassembled into 4 parts (excl. the hoists). - Documentation available: No Duoln Hkqswh Ni Dj Aot Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1996, Condition: used, Price: On request Overhead crane Double girders 10100mmspan 3000mm wide Lifting weight 6300kg Lifting height 8m Dujlnewh Nids Hkq Aot Crane books available Completely dismantled and ready for loading - Year: 1996 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2019, Condition: used, Price: On request Donati 454D electric chain hoist 3200kg Djln Hjwh Nf Sjkq Ajut Lifting capacity:3200kg Lifting height: Standard 3000mm Electric motor: 400V- 3 phase - 50 Hz- 2kW Weight of hoist +/- 105kg - Year: 2019 - Documentation available: No - CE mark available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, color: other, Price: On request Transport trolley overall dimensions: 10000mm X 3000mm X 650mm (lxwxh) dimension belt width: 300mm Doln Howh Nd Uskq Aeut - Documentation available: No - Type: Zwaartransportkar Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, color: other, Price: On request Concrete mixer Brand: tipo biduttor Type: RMA01 Year of construction: 2009 Reference no: P10109030 Motor: RPM: 2800/3360 frequency: 50hz 7.5KW Duoln Hewh I Daekq Aot Top flap diameter: 1250mm Input diameter: 400mm Output dimensions: 450mm x 650mm Overall dimensions: 2550mm X 2200mm X 3000mm (lxwxh) - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets