Used Doosan D35C-5 for sale (255)

Condition: excellent (used), power: 141 kW (191.71 HP), overall weight: 25,100 kg, Year of construction: 2017, operating hours: 7,862 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Hfjdpfx Ajzvbhfjckjl Operation hours: 7.862 hrs ROPS Radio back- drive camera Airco Hydr. 2 piece boom Stick : 3m central lubrication all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 quick coupler 1x Bucket with 800mm width U/C: 70% good trackshoes 600 mm width engine with 141.2kW CE Operation weight: 25.1 to.

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm Hfedpfx Ajypb Srjckol B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 12,776 h, load capacity: 2,500 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,170 mm, power: 34 kW (46.23 HP), drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 60 - 80% Hedpfx Aezz Uiaockofl Rear tire type: Solid rubber Rear tire condition: 40 - 60% Description: DOOSAN D25S diesel forklift - - - 2.5 ton lifting capacity - - - Year of manufacture 2012 - - - Side shifter - - - TRIPLEX free-lift mast - - - Overall height 2.17m - - - Lifting height 4.80m - - - 12714 operating hours according to meter - - - Forklift with 4-cylinder YANMAR diesel engine, 49 hp - - - Mechanical hydraulic levers - - - Solid rubber tires, front approximately 70%, rear approximately 50% - - - LED work lights, front and rear - - - Simple and mechanical forklift - - - Good condition - - - Front forklift can be viewed on site - - - New inspection certificate and new inspection carried out by a court-certified expert - - - Affordable delivery options!! Side shifter, 3rd valve, work light rear, work light front, heater, full cabin

Condition: excellent (used), Year of construction: 2001, Vertical CNC lathe Brand: DAEWOO (DOOSAN) Type: PUMA V550 Year: 2001 (10,000 cutting hours) CNC: FANUC 18i-T Specifications: Turning capabilities: Maximum turning diameter: 800 mm Maximum workpiece diameter: 730 mm Maximum turning height: 750 mm Horizontal travel: 390 mm Vertical travel: 780 mm 3-jaw hydraulic chuck: Hfjdpfxezym Uxs Acksl Diameter: 500 mm Rotation speed: 20 to 2000 rpm Main motor power: 50/37 kW Dimensions (width x depth x height) without conveyor: 1,950 x 2720 x 3070 mm Weight: 9 tons Equipped with: 8-tool turret Set of turning tool holders Set of jaws Chip conveyor

Condition: used, Year of construction: 2016, Due to the large number of non-serious emails / emails will not be answered. WhatsApp "Errors, typos, and prior sale excepted." Hfedezyw Ipjpfx Ackol

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ITALIAN — DOOSAN DVF-6500 Brand: DOOSAN Model: DVF-6500 Machine Type: 5-axis CNC machining center Year of construction: 2019 CNC control: Heidenhain TNC-640 X-axis travel: 750 mm Y-axis travel: 785 mm Z-axis travel: 600 mm B-axis travel: -120° / +120° C-axis travel: 360° continuous Rapid traverse rates X / Y / Z axes: 45,000 mm/min Working feed rates X / Y / Z axes: 20,000 mm/min B-axis rapid speed: 25 rpm C-axis rapid speed: 50 rpm Spindle mounting: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 18,000 rpm Maximum spindle power: 30 kW Maximum spindle torque: 155 Nm Tilting rotary table: Ø 650 × 600 mm Maximum workpiece size: Ø 840 × H 500 mm Maximum workpiece weight: 600 kg Tool magazine: 60 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 3,700 × 2,450 × H 3,100 mm Machine weight: 14,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): High-pressure pump with external unit Measuring systems: Heidenhain scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Mist extractor: Included Magnetic table: Included Zero point clamping system: Included Tooling: Set of shanks/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration ENGLISH — DOOSAN DVF-6500 Brand: DOOSAN Model: DVF-6500 Machine Type: 5-axis CNC machining center Year of manufacture: 2019 Hfjdsz Atwfjpfx Ackjl CNC control: Heidenhain TNC-640 X-axis travel: 750 mm Y-axis travel: 785 mm Z-axis travel: 600 mm B-axis travel: -120° / +120° C-axis travel: 360° continuous X / Y / Z rapid traverse: 45,000 mm/min X / Y / Z working feed: 20,000 mm/min B-axis rapid speed: 25 rpm C-axis rapid speed: 50 rpm Spindle taper: ISO-40 Tool holder / pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 18,000 rpm Maximum spindle power: 30 kW Maximum spindle torque: 155 Nm Tilting rotary table: Ø 650 × 600 mm Maximum workpiece size: Ø 840 × H 500 mm Maximum workpiece weight: 600 kg Tool changer: 60 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 3,700 × 2,450 × H 3,100 mm Machine weight: 14,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): High-pressure pump with external unit Measuring systems: Heidenhain scales on the X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Mist extractor: Included Magnetic table: Included Zero point system: Included Tooling: Set of shanks/pull studs and various tooling Documentation: Manuals, electrical diagrams and CE declaration

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) Hfedpfx Aszt Rwqocksl • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ITALIAN — DOOSAN DVF-5000 Brand: DOOSAN Model: DVF-5000 Machine Type: 5-axis CNC machining center Year of manufacture: 2018 CNC control: Heidenhain TNC-640 X-axis travel: 625 mm Y-axis travel: 450 mm Z-axis travel: 400 mm B-axis travel: −30° / +110° C-axis travel: 360° continuous Rapid traverse rate X / Y / Z axes: 40,000 mm/min Working feed rate X / Y / Z axes: 20,000 mm/min Rapid traverse rate B / C axes: 20 rpm Spindle taper: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 12,000 rpm Maximum spindle power: 18.5 kW Maximum spindle torque: 118 Nm Tilting rotary table: Ø 500 × 450 mm Maximum workpiece size: Ø 550 × H 450 mm Maximum workpiece weight: 400 kg Tool magazine: 40 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 2,700 × 2,205 × H 2,890 mm Machine weight: 7,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): 20 bar with cartridge filter Measuring systems: Heidenhain linear scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Fume extractor: Included Magnetic table: Included Zero-point clamping system: Included Tooling: Set of collets/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration ENGLISH — DOOSAN DVF-5000 Brand: DOOSAN Model: DVF-5000 Machine Type: 5-axis CNC machining center Year of manufacture: 2018 CNC control: Heidenhain TNC-640 X-axis travel: 625 mm Y-axis travel: 450 mm Z-axis travel: 400 mm B-axis travel: −30° / +110° C-axis travel: 360° continuous Rapid traverse rate X / Y / Z axes: 40,000 mm/min Working feed rate X / Y / Z axes: 20,000 mm/min Rapid traverse rate B / C axes: 20 rpm Spindle taper: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 12,000 rpm Maximum spindle power: 18.5 kW Maximum spindle torque: 118 Nm Tilting rotary table: Ø 500 × 450 mm Maximum workpiece size: Ø 550 × H 450 mm Maximum workpiece weight: 400 kg Tool magazine: 40 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 2,700 × 2,205 × H 2,890 mm Machine weight: 7,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): 20 bar with cartridge filter Linear scales: Heidenhain scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Hjdpoz Atvnsfx Ackjfl Workpiece probe: Renishaw Fume extractor: Included Magnetic table: Included Zero-point clamping system: Included Tooling: Set of collets/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Hfodpfx Acszd Sk Hskol Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: used, Year of construction: 2005, functionality: fully functional, Very well-maintained machine, regularly serviced and in good condition. - New B-axis spindel installed in 2025 - Includes a large number of tool holders, both live tooling and static tooling. - Bar feeder included. - Gantry loader included. Hfsdpjzh Rhfofx Ackel - 80-position tool magazine with Capto C6 tooling. The machine can be inspected under power and in production until 17 July.

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, overall weight: 15,000 kg, chain condition: 90 %, Year of construction: 2019, operating hours: 4,930 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Doosan DX 140LCR-5 with adjustable boom and HS 10 attachment, with 4,080 operating hours, year of manufacture 12/2019. Major service and statutory UVV inspection recently completed. Price and attachments on request. Hfjdpoww T Aaofx Ackjl

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 2,350 h, load capacity: 3,500 kg, lifting height: 4,350 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: head guard, lighting, pallet forks, sideshift, Doosan forklift D35C-7 year of manufacture 2018 Hsdpfxoy Af Eqo Ackjfl 2350 operating hours triplex mast / sideshift and 4th valve

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm Hjdpfxsyyd Uls Ackofl X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; PIECE CONVEYOR ; TOOL SETTER

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, Hfedpfx Aoylbpvockel spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control x-axis 0 mm z-axis 0 mm spindle taper 0 number of spindle speeds 0 engine output 0 kW weight of the machine ca. 8.200 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres for shaft machining The PUMA TL series stands out thanks to its innovative design, featuring both Hjdpfx Ajzvq Dpjcksfl upper and lower turrets. This advanced configuration makes it the ideal choice for the demanding machining of shafts, such as camshafts and crankshafts. Thanks to the capability for simultaneous 4-axis machining, complex machining processes can be carried out precisely, efficiently and in a single operation. --> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz --> Rated power: 52.33 kVA --> Max. connected load: 22.0 kW --> Full-load current: 137.33 A --> Short-circuit current: 33.0 kA --> Max. turning diameter: 350 mm --> Max. turning length: 700 mm --> Spindle bore: 76 mm --> Main spindle: Integrated motorised spindle drive with oil cooling --> Tool holder: VDI 40 --> Number of turrets: 2 --> Tool stations: 20 (12 upper / 8 lower) --> Tailstock: Hydraulic --> Lubrication: Automatic centralised lubrication --> Coolant system: Separate coolant tank, 210 litres --> Machine bed: Meehanite cast iron bed with hardened box-type slideways --> Chuck: Hydraulic chuck Manufacturer: SCHUNK --> Type: ROTA NC 315-86 --> ID No. > Design: 3-jaw wedge-hook power chuck --> Chuck diameter: 315 mm --> Through-bore: 86 mm --> Piston stroke: 25 mm --> Stroke per jaw: 5.8 mm --> Max. clamping force: 155 kN --> Max. actuating force: 58 kN --> Max. speed: 3,500 min?¹ --> Jaw pitch: 1/16" × 90°

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, Hedpfox Dk Dlox Acksfl FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: used, Year of construction: 2012, weight max. in kg 1500 kg serial number FGA04-1290-00480 drive Treibgas weight 2800 kg Hfsdpfx Acoztfyyekjl length in width 940 mm ca. 2.060 mm (je nach Mas engine output ca. 34 kW kW cubic capacity 1.975 cm³ ccm

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor, Hsdpfx Acex I N Rbskjfl

Condition: used, Year of construction: 2021, operating hours: 4,739 h, Equipment: air conditioning, Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = Hodpfjz Akt Dsx Acksfl - Central lubrication

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min Hedpfx Aow Dgcaockofl tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Hfsdpfx Acsx Sq Uvekel Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Hedpfx Aev Iq Ezsckofl Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor Hfsdpfx Aoyugvajckol - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: used, Year of construction: 2014, lifting height: 3,300 mm, fuel type: electric, fork length: 1,200 mm, Empty weight: 3.851 kg Hfsdpfx Asv Tignjckol Lifting capacity: 2.000 kg Maximum passing height: 215 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Please contact Christian Theißen for more information Units: 4196 Manufacturer: Doosan Model: B20T-5 FFT Year of build: 2014 Condition: Used Data: Max. lifting height: 3,30 m Max. Lifting capacity: 2000 kg Length forks: 1,20 m Drive type: Electrical Domensions LxW (without forks): x 1,09 m Building height: 2,15 m Own weight: 3.851 kg Special features: Sideshift, canopy, windscreen, trailer operation possible.

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm Hfsdpoycvpfefx Acksl -Y700mm -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.