Used Belflex Bf815 Scg-M for sale (26,710)

Condition: used, Year of construction: 2016, operating hours: 2,407 h, Field of application: Construction Empty weight: 1.591 kg Make of engine: Deutz TCD3.6L4 Capacity: 11,4 m³/m Fpob Hbowbnico Ezmsg Working pressure: 10 bar Please contact Sales Department for more information

Condition: used, Year of construction: 2011, operating hours: 915 h, Genie Z24/22N Articulated Boom Lift Working height 12.5 m * Platform height 10.5 m * Lateral outreach 6.8 m * Meter reading 915 hours * Powered by 48-volt electric motor with integrated charger * Tire size 22x7x17 * Tread depth 4-8 mm * Non-marking * Wheelbase 1880 mm * Wheel configuration 4x2 * Overall dimensions (length x width x height) 5650 x 1470 x 2000 mm * Weight 5214 kg * Basket load 227 kg * Rotating basket * Hydraulic jib 1250 mm * Basket dimensions (length x width) 1240 x 650 x 1100 mm * Basket and ground control Further specifications and additional images are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee is given for all information. Fjb Hbsv Swwrj Ezmspg Please also visit our website.

Condition: new, The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower blades jamming. The robust back gauge precisely positioned via the ESTUN 21 NC controller. Fsb Hjv Rbyheb Ezmspg

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: R-00424, arm reach: 1,885 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, payload: 10 kg, Refurbished FANUC M-16iB/10L manufactured in 2008.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-16iB/10L Model Number: A05B-1216-B502 Fpob Hb Ezsv N D E Djmog Year of Manufacture Robot: 2008.05 Warranty term (months): 12   Payload (kg): 10 Reach (mm): 1885 Repeatability (mm): ± 0.01 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 220   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2008.04 RCC Length (m): 10   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 14

Condition: ready for operation (used), Year of construction: 2011, turning diameter 420 mm turning length 760 mm control FANUC i Series turning diameter at chucking work 305 mm travel -x axis 293 mm travel -z axis 830 mm rapid travel - longitudinal/face 30 m/min main spindle speeds: 2800 UpM c-axis 0,001 ° turret (x-stations) 12 Fpob Hbsvzhg Ae Ezmeg spindle bore diameter 115 mm milling spindle motor 5000 UpM spindle drive 22/18,5 kW rated capacity 45 kVA weight of the machine ca. 6 t dimensions of the machine ca. 3,9 x 2,0 x 2,02 m High-performance horizontal turning center PUMA 3100 M. Running hours: approx. 3600, switch-on hours: 41000. 12-station tool turret with 50 mm bore diameter, C-axis, driven tools. Machine dealer with own stock of 1600 m².

Condition: used, mileage: 129,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 05/2019, loading space length: 4,500 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, MAN TGL 8.190 box body with 6-speed manual transmission, wheelbase 3050 mm, payload approx. 2500 kg, 100-liter diesel tank, leaf/air suspension, tires front: 80%, rear: 70%, radio, electric windows, digital tachograph, lane departure warning, Ringfeder trailer hitch, permissible towing capacity 11,265 kg, gross combination weight 18,725 kg, Dautel tail lift 1000 kg, New MOT/AU/LBW UVV (German Road Safety Inspection Association), new oil/filter service, new odometer test, Installation of a ball-head trailer hitch with a 3500 kg towing capacity is possible for an additional charge. If you have any further questions, please contact us at All information is provided without guarantee, errors excepted. Schiessel Nutzfahrzeuge Feb Hb Ezjwcunzsmepg Danny Mönch Dr. Emil Schilling Str. 10 89335 Ichenhausen

Condition: used, mileage: 76,900 km, power: 129 kW (175.39 HP), first registration: 05/2018, overall weight: 8,550 kg, fuel type: diesel, next inspection (TÜV): 06/2025, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Differential lock, rear axle stabilizer, radio Bluetooth, storage box, daytime running lights, lane keeping assistant, hill start assistant, Canter safety package including floor mats, driver airbag, transmission auxiliary drive, 400NM, with flange connection, lane keeping assistant, rear view mirror, extended mirror holder, long version, valve extension, driver comfort suspension seat, Olympus rear loader Mini 7 with 7m³ effective body volume, Olympus Mini tipping device for containers EN 840-1/2/3 (manual comb tipping device for 60-1100 l, folding arms), approx. 500 kg lifting capacity, folding slide for bulky waste (loading edge: bottom approx. 1000 mm, top approx. 1400 mm) Fpob Hbjf Dg Ixo Ezmeg

Condition: like new (used), Year of construction: 1990, Functionality: fully functional, GANNOMAT JUNIOR 320 Dowel and Slot Drilling Machine Very good condition, as good as new. The machine comes from an assembly company and has been used very little. Fjb Hewb U H Iob Ezmjpg It can mill slots and drill dowel holes on two levels without re-clamping. 380V, 1500W 2800 rpm Built in 1990 With this machine, you can mill slots for lock cases and similar items, or create all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and similar applications. Drilling on two levels, the grids and stops, and the machine's design allow dowel joints to be produced in a very short time, making it very economical. The machine requires a 6-bar compressed air supply (air consumption is very low). Clockwise rotation Milling and drilling Very good and clean. With 2 angle stops (a center stop and a side stop that can be used on both sides) and a 45° miter stop. You also get a 2000mm long stop rail with 2 folding stops. This stop rail can also be extended. The workpiece is clamped with 2 pneumatic clamping cylinders. The height adjustment from one drilling level to the other is also pneumatic. The pneumatic switch for this is located at the front of the machine, ensuring quick adjustment of grids and drilling levels. With a 12mm precision grid rail, which has a center grid and 12 grids on the left and right. Can be quickly converted to mortise milling. The machine can then be used without a grid. With 2 adjustable stops on the left and right, it then has a working width of max. 420mm. The machine has conical stop rings at the front of the machine table, which can be rotated downwards if necessary. The maximum hole height is 100mm. The maximum The hole depth is 150 mm with stop and scale. The maximum workpiece height is 160 mm. Everything works perfectly. The machine will be delivered and demonstrated by us personally throughout Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible upon request. The machine table is 870 mm wide, 140 mm deep at the sides, and 350 mm deep in the middle. Professional tool, not hardware store junk. You can start working with the machine immediately. With 2-jaw drill chuck up to 20 mm. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are OK and operate smoothly.

Condition: new, The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower blades jamming. The robust back gauge precisely positioned via the ESTUN 21 NC controller. Fpsb Hev Rbx Dob Ezmsg

Year of construction: 2023, Condition: new, Functionality: fully functional, Description Double mitre saw RAPID DGL 200 M Working length: 5,100 mm Working height: 160 mm Can be swiveled: yes Aluminum spraying device available Short dimension stop available Socket for external extraction available Vertical clamping device available Roller conveyor traveling (feed on the right) Rapid DGL 200 M double mitre saw ----- with saw blade diameter 500 mm, manual length adjustment with digital length display digital length display, pneumatic angle adjustment 45° and 90°, Simple operation and top quality ----- For precise and low-burr cutting of aluminum, plastic and wooden profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely stable machine bed - Complete grip of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: Fpeb Hbotdgits Ezmeg ----- Perfect dimensional and angular accuracy guaranteed. ----- To achieve this, we use precise and efficient movement technology: Ball bushing guides for length adjustment, spring suspension of the swivel units for convenient and safe angle adjustment between 45° and 90°. The length and angle of this two-head mitre saw are adjusted manually. Greater ease of use and increased performance can be achieved with the aid of a digital length display and pneumatic swivel device. A wide range of profile systems can be processed with 500 mm saw blades. can be processed. Technical data ----- Drive: 2 x 2.2kW three-phase 400 volt motors Swivel range: manual 45° to 90 Saw blade: 500 mm diameter Cutting lengths: 5,100 mm, Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Air pressure: 7 bar Dimensions: 5250/1420/1900mm weight: 1.260kg

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 8,688 h, load capacity: 3,000 kg, lifting height: 5,870 mm, free lift: 1,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,620 mm, power: 44 kW (59.82 HP), fork length: 1,400 mm, engine type: 4-Zyl. VW-Diesel, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Fpob Hstabubsb Ezmeg Transmission: Hydrostat Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Description: Sideshift, tine adjuster, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, STVZO, exterior mirrors, roof guard, Linde double pedal control

Condition: used, Year of construction: 1998, x-travel 650 mm y-travel 560 mm z-travel 650 mm table surface area 400 x 400 mm control Fanuc 18i-M spindle turning speed range 120-12000 U/min ja/yes hand wheel type of pallet-changer 2 Cooling through the spindle 10 bar chip conveyor ja/yes feed 670 mm/min distance work spindle /surface of the table 800 mm table load 400 kg toolpiece magazine: chain magazine 80 BT 40 b-axis 360 1° Fpjb Hb Eev R Hw Ejzmsg rapid traverse: 40 m/min feed 1-40.000 mm/min tool changing time 1,3 sec tool/tool tool changing time 3,8 sec chip/chip total power requirement 22,4 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, odometer6x tyres 385/65 R22.5 Bridgestone RT, 1 tow coupling, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the upper chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door leaf type Smooth-walled door leaves Continuous welded seams on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Feb Hberqua Sj Ezmepg

Condition: used, Year of construction: 1990, Svedala cone crusher Fpsb Hb Eovy Hwqszmog Type H 3000 FA EC2M 22-25-29 Basic construction year 1990

Condition: as good as new (ex-display), The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Fpjbev Rbv Ae Hb Ezmsg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Fpjb Hbepfat No Ezmeg Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg

Year of construction: 2024, Condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R Fjbjd R Dhpe Hb Ezmopg CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Condition: used, Applicable material: Food Power: 9 kW (12 HP) Empty weight: 1.035 kg Dimensions (LxBxH): 130 x 245 x 230 cm Fob Hb Eevty Ucozmopg Current frequency: 50 Hz Voltage: 400

Condition: excellent (used), Year of construction: 2014, operating hours: 1,305 h, Woma 550Z-250 M Twinjet, electric drive, USED, for sale: working pressure 550 Z, P35 1.300 bar-143 lpm, 250 M, P18 2.500 bar-31 lpm YoM 2014, wh. app. 1.305 h Technical data of the electric motor Power in - kW 500 Fpjb Hb Esvy Ea Rszmjg Revolutions in 1/min - 1,500 Operating frequency in Hz - 50 Operating voltage in V - 6000 Design type - In 3 Manufacturer - EMC

Condition: like new (used), mileage: 185,000 km, Year of construction: 2020, FIAT DUCATO MAXI YEAR 2020 L4H2 TOTAL LENGTH 6.40 ENGINE 3000 PETROL METHANE ISOTHERMAL WITH FRIDGE UNIT WITHOUT ATP USED FOR TRANSPORT OF GOODS NOT AVAILABLE KM 185000 AIR CONDITIONING SERVICED SINGLE OWNER 1 YEAR WARRANTY FINANCING POSSIBILITY BENITO 3383844139 Fpjb Hevbi Hdsb Ezmog MICHELE 3394588233

Condition: used, Year of construction: 1999, container length: 24 ft, overall weight: 18,000 kg, empty load weight: 3,000 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,640 mm, machine/vehicle number: 9115, JUMBO BDF swap body swap body with roller shutter --- * beaded steel box body * crane and stackable * length 7.45 m * Roller shutter door * Interior keyhole panel * Screen printed floor * neutral white WITHOUT labeling! * Slight rust on frame and body * Storage height: 1.02 - 1.32 m * Loading height at the roller shutter: 2.42 mm * Manufacturer: YMC Fjb Hb Ezsnkadremepg * With new UVV inspection on request * Available several times! --- Delivery possible nationwide! --- We always have larger quantities of different manufacturers and designs for sale or for RENT in stock !!! All prices net plus VAT!

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Fpeb Hb Ezepfat Tjmjg Engine power: 11 kW Extinguishing device: yes Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: used, overall weight: 39,000 kg, empty load weight: 8,340 kg, maximum load weight: 30,660 kg, axle configuration: 3 axles, loading space length: 13,327 mm, loading space width: 2,487 mm, loading space height: 2,648 mm, first registration: 10/2017, next inspection (TÜV): 10/2025, suspension: air-lift, color: white, tire size: 385 / 65 R 22,5, Year of construction: 2017, total length: 25,500 mm, total width: 40,000 mm, total height: 140,400 mm, front tire size: 385 / 65 R 22,5, rear tire size: 385 / 65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, suspension air lift, lifting and lowering, lifting axle 1st axle, toolbox, lashing eyes 13, 2 x LED reversing lights, moving wall, roll-up tarpaulin, work platform, aluminum rims, shovel + broom holder, loading gauge, cable remote control, double spare wheel holder without wheel, pneumatic unlocking, side doors left over the entire length Fjbjwbkirj Hb Ezmspg

Condition: new, Functionality: fully functional, machine/vehicle number: F 501xxxx, Year of construction: 2024, operating hours: 1 h, load capacity: 1,600 kg, lifting height: 4,800 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork length: 1,150 mm, total length: 1,899 mm, drive type: Elektro, construction width: 1,060 mm, net weight: 3,267 kg, Electric 3-wheel forklift truck Chassis number: F 501xxxx Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Fpjb Hb Ezsup Irkemeg Mast type: Triplex Gearbox: AC-Impulse Condition: New machine Technical condition: New Front tires Type: Non Marking Front tires size: SE 18x7-8 non-marking Rear tires Type: Non Marking Rear tires Size: SE 140/55-9 non-marking Battery Volt: 48V Battery Ah: 500Ah Battery Manufacturer: IBV Battery Type: PzS Battery year of manufacture: 2024 Description: New device, for customers with 12 months bring-in warranty, UVV-approved Sideshift, integrated 3rd valve, 4th valve, rear working lights, front working lights, roof cover, load protection grille, pulse control, full free lift, CE certificate, non-marking tires, 4th function couplings on fork carriage, indicators and rear lights, panoramic mirror, flashing light, Floor-Sport front and rear, battery (08/2024) with Aquamatik, external charger suitable

Condition: used, Year of construction: 2012, color: white, overall weight: 16,000 kg, empty load weight: 3,240 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,570 mm, machine/vehicle number: 547300, BDF swap body swap body with roller shutter Newly painted ! * Steel box body smooth wall * Length 7.45 m * Roller shutter door, fully repaired * Interior keyhole plate and rails for double-decker beams * Delivery with double-decker beams possible for an extra charge! * Lashing eyes embedded in the side wall * Screen-printed floor * Newly painted in RAL 9010 * Reinforced underbody * New underbody protection * New support legs in RAL 9005 - not height-adjustable, parking height: 1.32 m * Loading height at the roller shutter: 2,390 mm * Load securing certificate Code XL Delivery possible nationwide! We always have larger quantities of different manufacturers and designs for sale or for RENT in stock !!! Fob Hong Hdfjb Ezmspg All prices net plus VAT!