Used Belflex Bf815 Scg-M for sale (26,575)

Condition: new, The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower blades jamming. The robust back gauge precisely positioned via the ESTUN 21 NC controller. Fgjbou E I D Ts Ebtcgob

Condition: excellent (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC Fsbev Sqlcs Ebtcgogb -Length: approx. 53 m -Number: 4x wire rope available -Price: per roll -also other crane ropes: available -Transport dimensions: Ø 750 x 560 mm -Weight: 187 kg/piece

Condition: used, Year of construction: 2015, operating hours: 2,909 h, JCB 535-95 telehandler from year of manufacture with only 2,909 operating hours! ----* Manufacturer: JCB * Type: 535-95 * Year of manufacture: 2015 Fobewc H E Ss Ebtcgogb * Operating hours read: approx. 2,909 * Last service at approx. 2,881 hours * Power: 55 KW * Load capacity: approx. 3.5 T * Lifting height: approx. 9.5 M * Operating weight: approx. 8,760 KG * Incl. 1 x unused bucket * SWAY * CE declaration available * Road approval available * More photos available on request * Video available on request * Price: 34,900 euros, net + 19% VAT ----For more questions please call: For more question please call: Erik Kortum: Whats App Kai Kortum: Whats App ?All information without guarantee and warranty, errors and prior sale reserved. ?

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00400, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 260 kg, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12 Fgjbsv Spt Se Ebtcgeb   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, used calender brand Stilmec 90/Riboldi, useful length 10,050 mm., recess 750 mm., rollers diam. 45 mm., with numerical control for head descent and roller rotation. machine checked, perfectly in order, 6 month warranty, ready for delivery Feb Ebtowfdimocgjgb

Condition: used, Year of construction: 2000, Technical details: Fgjb Eeu Idffjbtcgob x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: new, The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Fjbouy Idis Ebtcgjgb

Condition: excellent (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: 60 m -Quantity: 1x wire rope available -Shipping/Price: complete -also other crane ropes: available Fjb Ebsvzp Saotcgjgb -Transport dimensions: Ø 820 x 620 mm -Weight: 196 kg

Condition: used, Year of construction: 2015, operating hours: 2,909 h, load capacity: 3,500 kg, lifting height: 9,500 mm, fuel type: diesel, Equipment: cabin, JCB 535-95 telehandler from year of manufacture with only 2,909 operating hours! ----* Manufacturer: JCB * Type: 535-95 * Year of manufacture: 2015 * Operating hours read: approx. 2,909 * Last service at approx. 2,881 hours * Power: 55 KW * Load capacity: approx. 3.5 T * Lifting height: approx. 9.5 M * Operating weight: approx. 8,760 KG * Incl. 1 x unused bucket * SWAY * CE declaration available * Road approval available * More photos available on request * Video available on request Fgeb Eewc H Hiebtcgjb * Price: 34,900 euros, net + 19% VAT ----For more questions please call: For more question please call: Erik Kortum: Whats App Kai Kortum: Whats App ?All information without guarantee and warranty, errors and prior sale reserved. ?

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation The only package system in the world that can also process a single board or single beam. Fsb Ebtcocbyp Nogjgb -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Condition: excellent (used), Features & Benefits Used belt conveyor of the manufacturer Overbeck Colour: blue Feet to be ordered separately Incl. SEW motor Material: steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional 1 pcs. in stock belt conveyors The webbing is ideally suited in the order picking zone to interlock machines or workstations and to optimise the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or unloading point and also serves, for example, as a connecting section in front of or between production and processing machines. In addition, it enables efficient part transport in the plant and warehouse and serves to transport considerable quantities and distances. Technical data: Belt conveyor dimensions Overall length: 1,610 mm Total width incl. motor: 620 mm Total width without motor: 510 mm Belt details Belt width: 400 mm Belt type: Grip Condition: New frames Fob Ebodu T Abetcgsgb height: 140 mm width: 30 mm Material: steel

Condition: excellent (used), Year of construction: 2021, operating hours: 450 h, Functionality: fully functional, machine/vehicle number: M-20ia/20M, load capacity: 20 kg, Fanuc M-20ia/20M robot from November 2021. Fjb Ejwccfnjbtcgsgb In perfect condition, used on a test bench. Options: Modbus R800/DCS J556/Collision Guard J684/User Pocket R648 800mm height extension available for sale if needed.

Condition: new, The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Fob Ebouyin Notcgegb

Condition: good (used), Centrifugal fan, dust extractor fan, fan, extractor, dust fan Fsb Ebtjfd Hffjcgogb -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

Year of construction: 2018, Condition: like new (used), Interroll 113S drum motor 800mm drive roller, 0.18Kw, 24m/min more pieces Manufacturer: Interroll Type: 113S Roller width: 800 mm Axle length: 800 mm + 2x 30 mm axle stub Cylinder diameter: 120 mm Flat width: 20 x 35 mm Nominal speed: vN 0.56 m/s voltage: 400v 50Hz 0.62A Fsb Ebtema Rtascgegb Nominal speed: 0.4 m/s Housing material: stainless steel Protection: IP66 Weight: approx. 15.3 kg

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) Fgob Esh R Taqobtcgob - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), Properties Used belt conveyor of the manufacturer Schulz Feet to be ordered separately Incl. motor and side guide Material: steel Ideal for fast material transport Expertly dismantled and packed condition: fully functional Fgebsd Ecupj Ebtcgeb 11 pieces in stock Belt Conveyor In the order picking zone, the belt is ideal for interlocking machines or workstations and optimising internal processes. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or discharge point and also serves, for example, as a connecting line in front of or between production and processing machines. In addition, belt conveyors efficiently transport parts to the factory and warehouse and are used to convey considerable quantities and distances. Technical data: Dimensions of the belt conveyor Total length: 1,710 mm total width: 475 mm Details of the belt belt width: 380 mm Belt type: smooth Frame Material: steel

Condition: new, The models from the KHT M NC series are built under a swing-beam design. The cutting bar is guided in a pivot bearing anchored in the machine body making cuts very straight without the risk of upper and lower blades jamming. The robust back gauge precisely positioned via the ESTUN 21 NC controller. Fgeb Ebtsq Rtp Recgob

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector Fob Ebemhhy Njtcgogb 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), Year of construction: 2007, Features Used belt conveyor of the manufacturer Transnorm Colour: silver Incl. SEW motor and side guide Ideal for fast material transport Professionally dismantled and packed Condition: fully functional Material: Aluminium Year of manufacture: 2007 Belt conveyor The belt conveyor is ideally suited in the picking zone to interlock machines or workplaces and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. In addition, it enables efficient transport of parts in the factory and warehouse and serves to convey considerable quantities and distances. Technical data: Dimensions of the belt conveyor total length: 7.180 mm Total width: 700 mm Details of the belt Belt width: 400 mm Fgsb Eodr Hb Tsbtcgob Belt type: Lenks groove Belt type: KT202

Condition: new, The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Fjbjqc S Naj Ebtcgegb

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Fob Ebtjd Tqalscgsgb - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2007, Properties Fgsb Ebtodr Hb Hecgob Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide built: 2007 Ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.100mm (1 x 800mm, 1x3900mm & 1x2400mm) Overall width incl. motor: 700 mm Information on the belt Belt width: 400 mm Belt type: Front Groove belt type: KT202

Condition: as good as new (ex-display), This ROTURN M Series machine has all the features of a classic compact CNC production lathe. Modern, rigid inclined-bed design with linear guides on all axes, powered collet chuck and hydraulically moved tailstock quill. Including C-axis, 12-station tool turret, and driven tools for axial and radial drilling and milling A link conveyor for chip removal and a highly efficient coolant system complete the equipment package. The Siemens 828 D Basic control meets all requirements for advanced control technology. Feb Ebjmfr Eaotcgogb

Condition: as good as new (ex-display), The AHK M series was developed as a modern, inexpensive NC alternative to CNC press brakes. Many operators are familiar working without CNC programming, and this model series combines proven technology with modern safety standards. The back gauge in the X- and R-axes and the depth gauge in the cylinders can be positioned directly using the touchscreen, or bending sequences can be stored in the NC control for automatic operation. The series is convincing in the production of workpieces with recurring materials and contours. Fgob Ebtsmf Tilscgob