Used Belflex Bf815 Scg-M for sale (26,577)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. Fgolqvvhefdkb Tjuob The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: used, Year of construction: 2017, operating hours: 4,589 h, load capacity: 4,000 kg, lifting height: 17,000 mm, fuel type: diesel, construction height: 2,690 mm, gearing type: semi-automatic, Equipment: cabin, head guard, JCB 540-170 telehandler from 2017 with only 4,589 operating hours! ----* Manufacturer: JCB * Type: 540-170 4x4x4 * Lifting height: 17 meters * Load capacity: 4 tons * Year of manufacture: 2017 * Operating hours read: approx. 4,589 * Sway = leveling system Fgelqvowcu Uzovhusb * Power: 55 kW * Operating weight: 12,300 kg * Loading forks * Auxiliary hydraulics * Cab * Windshield protection grille * Video available upon request * Additional photos available upon request * Bucket available for an additional charge! * Price: €48,900, net + 19% VAT. ----For further questions, please call: For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information is provided without warranty and guarantee. Errors and prior sale reserved. ----

Condition: used, mileage: 593,000 km, power: 382 kW (519.37 HP), first registration: 09/2015, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, RENAULT C520 Hooksystem + CRANE / 6x4 Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 593 000 km EQUIPMENT: ? ABS ? ASR ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH HOOKSYSTEM LENGTH: 4,80 M HEIGHT OF HOOK: 1,3 M CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 490 / 135 cm TIRE SIZE: 1st Axle: 385/65R22,5 2ns and 3rd Axle: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: KESLA 2111 TEL: Fslqvjwflvzevhujgb * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref. nr: 00102

Condition: used, Functionality: fully functional, machine/vehicle number: FN 44xxxx, Year of construction: 2013, operating hours: 6,871 h, load capacity: 1,400 kg, lifting height: 5,500 mm, free lift: 1,805 mm, fuel type: electric, mast type: triplex, construction height: 2,355 mm, fork length: 1,200 mm, total length: 1,774 mm, drive type: Elektro, construction width: 1,060 mm, net weight: 3,390 kg, Electric 3-wheel forklift Chassis number: FN 44xxxx Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: AC-Impuls Condition: Reconditioned without guarantee Technical condition: very good Front tires type: Non Marking Fgslqveu D R S Devhujb Front tires size: SE 18x7-8 non-marking Rear tires type: Non Marking Rear tires size: SE 140/55-9 non-marking Battery voltage: 48V Battery Ah: 500Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2024 Description: serviced, technically and visually refurbished, UVV approved, new battery installed, without warranty/liability for material defects Side shift, integrated 3rd valve, 4th valve, front work light, pulse control, full free lift, CE certificate, non-marking tires, 5th valve, multi-pilot (joystick), plug-in couplings 4th + 5th function for attachments on the fork carriage, mechanical bracket system, panoramic mirror, fabric seat, floor spot at the rear, non-marking tires, battery (newly installed in 04/2024 - unused) with Aquamatik, external charger suitable

Year of construction: 2009, Condition: good (used), age 2009 Fgjlqjtrwwtovvhueb combined platepunch- and bending device plate punch HD Autoplate plate bender HD Autoplate register system 425 mm Delivery time: immediately from stock

Condition: new, Year of construction: 2025, overall weight: 860 kg, Hello we have an offer for 10m open DIN 30720-1 6/4mm container single outlet hook U-profile 80x40x4mm, edges reinforced inside and outside, primed and painted in a selected RAL color. We deliver our product to the specified address. Transportation costs depending on the size of the container 150-200 Euro. Bottom made of 6 mm (S235JR) Sides made of 4 mm (S235JR) incl. flat and net hooks U-profile 80x40x4mm On customer request we can test the container according to DGUV. + 35 euro Warning sticker + 35 euro per container If you are interested, please contact us directly. We offer other containers in DIN 30720 and DINmm and 5/3mm triple unloading hooks and single unloading hooks U-profile 80x40x4mm U-profile 100x50x4mm - Open - Lid Fslqvvhskqr Hdsusgb - Flaps - Crane recesses Please contact us under the telephone number or via meil

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Fgjlqvvhefdkb Ueusb - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 1997, I will sell Mosca RO-M-P2, good condition. Fgjlqjv Uphuevvhusb

Condition: new, Year of construction: 2025, Tfon Leveltech® TF M-5516 Leveling Machine Features: Material Thickness (mm): 1 - 15 Fgslqvvokyrqfshujb Maximum Material Width (mm): 1600 Minimum Material Length (mm): 110 Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic/PC Control Overload Protection: Standard Screen: Touchscreen CE Certificate: Standard Machine Size (mm): 3500 x 2905 x 1950 Total Weight (kg): 19,000

Condition: good (used), Year of construction: 2013, Functionality: fully functional, - 2x PC6500 with discharge valve - 2x PC6500 with discharge door Fgjlqvvowcfg Uohueb Price on request

Condition: new, Functionality: fully functional, Year of construction: 2025, Double-leaf door (DFT) 2 units in stock, RAL 7043 13 units available at short notice, other RAL colors available upon request Technical description: Fjlqvvhowcyxxjuegb Interior dimensions: 7000 x 2300 x 2400 mm (L x W) Usable capacity: 38.6 m³ Empty weight: 3,000 kg Floor: 5 mm S235 Side walls: 3 mm S235 All sheets and profiles are continuously welded Double-leaf door with safety lock Warning markings according to DIN 67620 Container tested and approved according to DGUV 114-110 Floor-side wall connection: 45° Hook diameter: 50 mm, S 355 Hook height: 1,570 mm Top frame: round tube: 89 x 6.3 mm Net hooks All moving parts can be greased Steel rollers: 159 x 6.3, length: 300 mm Zinc phosphate primer inside and out, painted with synthetic resin varnish (80-100 μ) on the outside Permissible total weight: 15,000 kg

Condition: used, Year of construction: 2007, Type 1B/1K-M Fgjlqvvjitvdnohusb Max. length of workpiece. 5000 mm Max. workpiece width. 300 mm Quontity of mortising: 180 mm Max. working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 4900 Eur (EXW Jonava, Lithuania)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Fslqjfdkbhsvvhusgb Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2022, Functionality: fully functional, load capacity: 1,500 kg, 3D perforated table 2000 x 1000 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, table top flat machined, very solid weight approx. 750 kg The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Fslqevlx Hbsvvhujgb Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price includes table top with feet, but without 3D accessory clamping devices.

Condition: used, Year of construction: 2016, operating hours: 11,900 h, CAT RADLADER 950 M WITHOUT SHOVEL German machine Tires approx. 50 All maintenance by CAT original color etc.... Fjlju T Uqysqvvhuogb

Condition: good (used), Year of construction: 2013, Functionality: fully functional, pressing force: 34 t, power: 5.5 kW (7.48 HP), Stationary press with lifting tilting system - complete set! - Hydraulic couplings - Hydraulic container closing system - Inclined press block - Lifting tilting system (raised) - 2x matching exchange container with discharge valve available Fjlqvowcffqsvhuogb - 2x matching exchange container with discharge door available Immediately deployable, price on request.

Condition: new, Functionality: fully functional, Year of construction: 2025, Leasing/hire purchase available. Steel lids 6 units directly from stock, RAL 7043 10 units available at short notice, other RAL colors upon request Technical description: Dimensions: 3740 x 1720 x 1500 mm Base: 5 mm S235 Sides: 3 mm S235 Felqvvhewcyv Rsujgb Steel lid, 1.5 mm S235, vertically adjustable Torsion bar spring All sheets and profiles welded throughout Container tested and approved according to DGUV Rule 114-010 Corner reinforcements Triple tilting bearing on both sides (45 mm diameter bolt) Stacking strip L-profile Safety strip Frame edges U80x50x4 Zinc phosphate primer inside and out, painted with synthetic resin paint (80-100 μ) on the outside Empty weight: 784 kg Gross vehicle weight: 10,000 kg

Condition: used, mileage: 120,000 km, power: 228 kW (309.99 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2000, first registration: 08/2000, Equipment: ABS, crane, * MAN 26.314 Roofing / assembly crane * EZ: 08-2000 * Cormach 8700 * Hoe height: 55 m Fjlqvjvilnmovhuegb * Radio remote control * Complete documentation is available!!! * more pictures and videos via Whatsapp * Information without guarantee and subject to prior sale.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Fgslqvvhjd Tbbdeuob We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2013, Functionality: fully functional, pressing force: 34 t, power: 7.5 kW (10.20 HP), L&M H900 stationary press + container The H900 has a raised press block (900mm) and is specially designed for extremely large pieces / quantities of cardboard. The machine is powered by a 7.5 kW electric motor. Originally built in 2008 and overhauled by Wortmann Milieutechniek in 2013. This machine has been maintained by Wortmann Milieutechniek, the entire maintenance history is available. Fgelswcd Nnoqvvhujb Immediately ready for use!

Condition: used, Year of construction: 2016, operating hours: 20,300 h, Equipment: all wheel drive, * CAT 966 M XE wheel loader * Year: 2016 * Bst: 20.300 H * Weight: 24,000 kg * Air conditioning * more pictures and videos via Whatsapp * Information without guarantee and subject to prior sale. Fgslqvvsu A H Tushusb

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: Fgelqvvhoguk Dkoujb - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 9484, Husmann interchangeable container Felswcdr Njqvvhusgb Unloading door / closing slide converted for a L&M KBW-TS

Condition: used, mileage: 167,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,490 kg, first registration: 01/2022, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * MAN TGL 8.190 * EZ: 01-2022 * Total volume: approx. 120 m³ * Automatic transmission * Engine brake * Air conditioning * Cool box * Interior length: 7.6 m Fgelqvvov Erc Nshusb * Interior width: 2.47 m * Interior height: 3.05 m * 1 x axle trailer * Spermann * EZ: 01-2010 * Interior length: 7.82 m * Interior width: 2.47 m * Interior height: 3.05 m * more pictures and videos via Whatsapp * Information without guarantee and subject to prior sale.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Felqsguk Dvovvhuegb Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.