Used Ciata P-170 He for sale (44,493)

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. Gsdpfxjyzzh Ej Ahdskc *

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Gksdpfovwf Rdex Ahdoc

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motorTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Godpfx Ahovwf N Todjkc

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Empty weight: 450 kg Serial number: 25.50.744.013 Gksdpjy Efrcjfx Ahdjc We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 694 kg, maximum load weight: 2,006 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper NEW VEHICLE Gjdpfx Ahsghpdfjdekc Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 2006kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED side marker lights at the front Rear lamps with reversing light and triangle reflectors Upper frame mounted on rubber pads Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICES STARTING FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Black Edition (Powder-coated side panels and rims in black) - Integrated ramps, 2800kg capacity - 35cm side panels - Battery charger - Electric tipping control - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work on a tilted vehicle - Folding crank for rear supports - Complete LED lighting - Theft protection - Net, fine or coarse mesh - H-frame - Leaf guard in various heights, also closed - Extension side panels 30cm with tensioning latch - Flat cover with or without bows - High cover 160cm - 200cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 250 € net. Images are for illustrative purposes only and may show optional accessories at an additional cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, including for caravan trailers. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a wide range of rental trailers with us. Visit us online or come directly!

Condition: new, GMN HCS 170-40000 / 10 high-speed spindle SN:360758, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Gedpfxsx Dwpzj Ahdokc

Condition: used, empty load weight: 3,260 kg, maximum load weight: 7,240 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2008, loading space length: 7,100 mm, loading space width: 2,470 mm, loading space height: 2,600 mm, total length: 9,100 mm, total width: 2,550 mm, total height: 3,750 mm, suspension: air, tire size: 245/70 R 19,5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, ABS (anti-lock braking system), air suspension, 2 axles, BPW axles, tandem axle, curtain, lashing points, lifting and lowering mechanism, through-loading system, height-adjustable drawbar. Body: through-loading, portal doors at the front, sliding tarpaulin, rear tailgate with roll-up cover, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Godpoi Rpxajfx Ahdokc

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Gksdpfx Ahsz Harzodoc Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: good (used), Year of construction: 2016, operating hours: 13,110 h, load capacity: 1,600 kg, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, Year of construction: 2016 Field of application: Internal logistics Gkodpfx Ahsz R Imcsdec

Condition: used, mileage: 196,173 km, power: 152 kW (206.66 HP), first registration: 06/2016, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,980 mm, total width: 2,550 mm, total height: 2,680 mm, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, soot filter, Iveco ML75E21/P Eurocargo E6 flatbed, 1st owner, 196,000 km, well-maintained by the workshop, Iveco, MOT valid until 10/2027. Flatbed dimensions approx. 6100 mm x 2500 mm x 500 mm Gkedpfx Asx Tb Dkshdsc Standard equipment: Iveco Eurocargo 75E21, air conditioning, axle configuration: 4x2, anti-lock braking system (ABS), exhaust on the left side, 120 Ah battery, co-driver's seat bench, steel compressed air tank, EURO 6 engine, driver assistance system: lane monitoring assistant, cab: for short-distance transport, driver's seat, adjustable, tachograph with driver changeover, suspension: leaf spring / air, electric windows, 70 A generator, speed limiter, speed control system (cruise control), 6-speed gearbox, urea tank (AdBlue): 30 liters, Iveco Control Display Highline, body/superstructure: chassis, fuel tank: 120 liters, heated air dryer, 4.5 liter engine - 152 kW diesel, engine brake, wheelbase 4185 mm, rear cross member D 70KN, splash guard in the wheel arch, LED daytime running lights, electronic immobilizer, central locking with remote control, permissible total weight 7.49 t, etc. Appointments and test drives by telephone arrangement. The information provided on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. Errors and prior sale excepted.

Condition: good (used), Raised floor, slab supports, pedestal supports, hollow floor, cavity floor, system floor, cable floor -Raised floor: Hollow floor basic structure without floor panels -Metal support: 246 pieces, height 95 to 170 mm Gkodpfeyuumaex Ahdjc -Crossbars: 195 pieces, width 30 mm x height 32 mm -Crossbar length: 135 x 935 mm, 30 x 885/435 mm each -Price/Fee: complete -Transport dimensions: 1230/810/H700 mm -Weight: 685 kg

Condition: good (used), Year of construction: 2011, operating hours: 16,640 h, load capacity: 1,600 kg, lifting height: 3,600 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, Year of construction: 2011 Gkodjz R Imvopfx Ahdjc Field of application: Internal logistics

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Gkedpegu N Alsfx Ahdsc Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Manufacturer: Tom Chandley Ltd Gkjdpjw Rn Eusfx Ahdsc ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Manufacturer: Tom Chandley Ltd ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Sideboard height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 51 degrees to the rear Hand pump with adjustable handle OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Integrated loading ramps 2800kg -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration certificate, 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us. Gjdpfx Ahjghpcaodskc

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 585 kg, maximum load weight: 2,115 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 276cm x 170cm Side board height: 30cm Loading platform height: 65cm Total weight: 2700kg Payload: 2118kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side boards with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Gkedpfxoghpdis Ahdec Net/rope hooks on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light, NSL (rear fog light), and triangular reflectors Upper frame mounted on rubber Large tilting angle of 48 degrees backwards Hand pump with adjustable handle OPTIONAL ACCESSORIES – PERMANENT PRICE REDUCTION STARTING IN FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side boards (price reduction) - Side board height increased to 35cm - Black Edition (powder-coated side boards and rims in black) - Integrated loading ramps 2800kg - Electric tilting operation - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump in combination with electric operation - Safety support for maintenance work on a tilted vehicle - Folding crank for rear supports - Complete LED lighting - Anti-theft device - Net, fine or coarse mesh - H-frame - Leaf grate in various heights, also closed - Extension side boards 30cm with tensioning latch - Flat cover with or without bow - High cover 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document €200 net. Images are for illustrative purposes and may show optional accessories that incur an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, also for caravans.

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Gkjdpfxoxv Exbo Ahdsc

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 782 kg, maximum load weight: 1,918 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + Integrated aluminum loading ramps + electric tipping control NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Integrated aluminum loading ramps in the ramp compartment, 2.8t load capacity Electric tipping control 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug Gkedpozxr Smjfx Ahdsc LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Large tipping angle of 49 degrees backwards Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -35cm side panels -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on the tilted vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tensioning latch -Flat cover with or without bow -High cover 160cm - 200cm More accessories available upon request! plus freight to Gera and vehicle registration certificate 250 € net Pictures are for example purposes only and may show optional accessories that incur an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. A wide selection of rental trailers can be found with us. Visit us online or come by!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-17, empty load weight: 635 kg, maximum load weight: 2,835 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,680 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MG 306 170 3500 2 – Machine Transporter NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 40cm Total weight: 3500kg Payload: 2825kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO Largest possible axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side panels 15mm thick, non-slip and robust screen-printed wood floor Automatic jockey wheel with 400kg support load 12 lashing eyes with 1000kg tensile force, also on the front Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector Side marker lights at the front Rear lights with reversing light, NSL (number plate light), and triangular reflectors Steel ramps with eccentric locking system, 2800kg capacity Adjustable rear supports Walkable steel fenders OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Superstructure and fenders painted to customer specifications -Black Edition: superstructure and fenders painted black -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Force One diamond plate floor and 4x diamond plate steps -Grille between ramps -Shovel rack -Height-adjustable drawbar with DIN towing eye Gjdpfx Aheghpb Dodekc -Rear bulkhead Further accessories available on request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories that incur additional costs. Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories, including trailers from various manufacturers. You can find a wide range of rental trailers with us. Visit us online or come directly!

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, fork length: 2,400 mm, empty load weight: 795 kg, Forks Load center: 600 Fork width: 200 mm Fork thickness: 60 mm Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Luck model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options at favorable terms are always possible. We would also be happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this LOAD STABILIZER. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our premises. Gkjdpsz Ev Rdofx Ahdsc

Condition: ready for operation (used), Year of construction: 2011, Vibratory plate compactor Wacker Neuson DPU 6555 He, year of manufacture 2011, serial number 10043154, electric start, power 9.6 kW, weight 481 kg, with extension kit. Gksdpfsh Ha Daex Ahdsc

Condition: good (used), mileage: 261,141 km, power: 125 kW (169.95 HP), first registration: 01/2009, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro5, number of seats: 2, total length: 7,900 mm, total width: 2,520 mm, permissible axle load (axle 1): 4,000 kg, permissible axle load (axle 2): 7,000 kg, loading space length: 6,150 mm, loading space width: 2,490 mm, loading space height: 2,420 mm, Year of construction: 2009, Equipment: ABS, Bluetooth, central locking, cruise control, electric window regulation, power assisted steering, spoiler, tail-lift, = Additional Options and Accessories = - Passenger seat - Sunroof - Roof spoiler - Euro 5 emission standard - Remote central locking - High beam headlights - Air suspension - Radio/CD player - Side door - Sun visor = Additional Information = Technical Information Number of cylinders: 4 Engine displacement: 4,250 cc Front axle: Max. axle load: 4,000 kg; Steered Rear axle: Twin tires; Max. axle load: 7,000 kg Weights Unladen weight: 6,100 kg Gkjdpfxoz Nkyio Ahdsc Payload: 4,400 kg GVWR: 10,500 kg Functional Features Tail lift: D'HOLLANDIA DHLM.50, tailgate, 1,500 kg Condition Technical condition: good Optical condition: good Identification Registration number: BV-TV-76

Condition: ready for operation (used), Year of construction: 2010, Wacker Neuson DPU 6555 vibratory plate, year of manufacture 2010, serial number 2147924, electric start, power output 9.3 kW, weight 476 kg, with extension. Godjh Ha D Eepfx Ahdokc

Condition: new, functionality: fully functional, machine/vehicle number: NEW-12, maximum load weight: 2,251 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 306 170 2700 2 NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 65cm Total weight: 2700kg Payload: 2265kg Braked tandem axle trailer Overrun brake and handbrake by KNOTT Gjdpfx Ajghpchshdekc 2x 1350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tensioning latches Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed plywood floor Automatic support wheel with 400kg support load 8 noise-reducing lashing points with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pole connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICES STARTING IN FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Without side walls (price reduction) - Side wall height increased to 35cm - Black Edition (Powder-coated side walls and rims in black) - Integrated loading ramps 2800kg - Steel plate on the base plate - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf guard in various heights, also closed - Extension side walls 30cm with tensioning latches - Flat cover with or without bow - High cover 160cm - 200cm - Folding crank rear supports More accessories available upon request! Plus freight to Gera and vehicle registration document 200€ net Images are for illustrative purposes and may show optional accessories at an additional cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: used, mileage: 146,235 km, power: 60 kW (81.58 HP), first registration: 06/2005, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2027, color: blue, gearing type: mechanical, emission class: euro1, Year of construction: 2005, Equipment: ABS, electronic stability program (ESP), Mercedes-Benz 208 Sprinter CDI Godpfx Ahsz Iuquedokc Special equipment: Ladder rack behind the cab, radio preparation, rear wall with window, seat cover/upholstery: artificial leather (cab), seat cover/upholstery: artificial leather Additional equipment: Airbag on driver's side, battery 88 Ah, tachometer, generator 90 A, seat belt pretensioners, body/superstructure: standard platform body, fuel pre-heating (diesel), engine 2.2 liters - 60 kW CDI catalytic converter, wheelbase 3550 mm, seats in the cab: standard driver and passenger seats, front stabilizer, permissible gross weight 2.80 t.