Used Tos Sn 500 S for sale (53,029)

Condition: excellent (used), Vötsch Type: VT³ 4150/S Vötsch temperature test chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate Dkslqyy Roinuhgstsl 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 1985, Condition: good (used), machine/vehicle number: 013125, Offer 21283 Technical data: - Grinding wheel diameter approx. 500 mm - grinding wheel width approx. 50 mm - grinding wheel bore approx. 127 mm - wheel speed 950 rpm - drive 400 V / 3,3 kW Delqei Daw Teyy Rtjkl - working height approx. 800 mm - working depth / protection depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included Delqyyjv U Dlue Rtekl

Condition: good (used), punching pressure: 70 t, Punchingpower: 70 Ton Punching capacity: Ø 28 in 20 mm steel Throat: 300 mm Cuttingcapacity: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flatsteel Dkslqyy Rsuby Slstjl 45 mm round bars Notching: 100 x 13 mm Featured with: - Elektric stop 1000 mm - Various tooling and accesories - 2 Cylinder machine Country of origin: Spain Motor power: 7,5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Condition: ready for operation (used), Functionality: fully functional, Pillar Drill Dkjlqyy Rswaihdjtjl ALZMETALL AB5 / S Technical Specifications: Drilling capacity in steel ST 60: 50 mm Drilling capacity in steel ST 60: 65 mm Drill spindle mount: MT 5 Drill spindle stroke: 240 mm Thrust: 385 mm Max. distance from table to drill spindle: approx. 820 mm Max. distance from base plate to drill spindle: 1325 mm Drill spindle speeds: continuously adjustable from 40 to 800 rpm Drive: 380 V / 4 kW Space requirement: approx. W 750 x H 2350 x D 1500 mm Weight: approx. 1500 kg

Year of construction: 2018, Condition: ready for operation (used), A complete Heat and Control line for frying extruded snacks is available. Components: Product feeding system, vibration system for product feeding and particle removal, deep fryer, filter for removing burnt particles, oil heating system with burner, oil tank, oil return system, chimney, control cabinet. Frying capacity: 500kg/h, total system length: approx. 10000mm, total system height: approx. 3500mm. Including spare parts. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Dolqyjwdwy Noy Rtskl

Condition: used, mileage: 154,761 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 01/2019, fuel tank capacity: 57 l, emission class: euro6, color: white, number of seats: 3, number of previous owners: 3, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, compressor, electronic stability program (ESP), immobilizer system, sliding door, traction control, = More options and accessories = - Right side sliding door - Automatic dipped beam - Heated exterior mirrors - Passenger airbag - Bluetooth car kit - Electric front windows - Electrically adjustable exterior mirrors - Electronic brake force distribution - Euro 6 - Driver airbag - Remote central locking - Wooden loading area - Height-adjustable steering wheel - Air conditioning - Trunk lid - Multimedia capability - Radio - Tire pressure monitoring - Reversing camera - Sidebars - Start interrupter - Intermediate partition = More information = General information Number of doors: 4 Model range: June 2016 - Aug. 2019 Cab: simple Technical information Torque: 270 Nm Number of cylinders: 4 Engine displacement: 1,598 cc Transmission: 6 gears, manual Acceleration (0-100): 14.4 s Top speed: 169 km/h Dimensions Length/height: L3H1 Dimensions (L x W x H): 537 x 193 x 199 cm Weights Empty weight: 1,779 kg Payload: 722 kg GVW: 2,501 kg Interior Interior: black Environment CO₂ emissions: 164 g/km Consumption Average fuel consumption: 6.3 l/100km Fuel consumption in urban areas: 7.8 l/100km Djlqjvnr Eisyy Rtekl Fuel consumption outside urban areas: 5.4 l/100km Maintenance, history and condition Booklets: Available APK (technical main inspection): tested until 01.2026 Number of keys: 1 (1 hand-held transmitter)

Year of construction: 1997, Condition: ready for operation (used), General Data Measurements width 6500 mm Measurements depth 18500 mm Measurements height 2000 mm Machine weight 10500 kg Additional Equipment Press (Face Press): Pressing Pressure 6 - 12 t and power consumption of 52 kW Compressed Air Consumption: 350 NL/min for milling machine, 500 NL/min for press Suction Volume: 10600 m³/h The machine ensures fast transport cycles with precise alignment Includes a hydraulic pressing system for continuous jointing Features integrated dust extraction and suction systems This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine. Dkolqyy Rev Utpcotel Application Types Other Woodworking Machinery

Condition: new, Year of construction: 2024, TECHNICAL DETAILS: -Max. length of horizontal cut :mm 4200 -Max. length of vertical cut :mm 4200 -Max. height of cut :mm 2200 -Max. height of horizontal cut :mm 2080 -Max. depth of cut :mm 60 -Motor output :HP 5 (3.7 KW) -Blade diameter :mm 250 -Blade speed :rpm 5300 Dkjlqyeq Rvymey Rtol -Manual shifting frame, with visual reminders. -N° 4 positioners for horizontal cuttings. -N°1 Stop for vertical cuttings. -Short piece cutting device (L. 2340 mm), to support small panels. -Lift-up Rollers. -SELF-BRAKING motor. -V.400/3/50Hz. - pre-arranged for independent dust extraction -All standard accessories: safety device, soundproofing, set service tools, user’s manual. Optionel (not included in the price) Electronic Vertical measuring display Euro 1000,00 Optionel (not included in the price) Electronic Horizontal measuring display Euro 1000,00 ( not installed on the machine )

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min Dkslqsvixh Tsyy Rtol voltage 400 / 50 Hz Volt table: 300 x 240 mm column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, Functionality: fully functional, Controller SIEMENS 828D with Shopturn and 17 inch Touch screen Swing dia 550 mm Turning length 428 mm Max. turning dia 300 mm Spindle bore 62 mm Max bar dia 51 mm Spindle face A2-6 Spindle speed 35 - 5000 rpm motorspindel Dkolqyowbu T Ujy Rtsl Travel X axis 210 mm Travel Z axis 561 mm Turret 12-fold (all stations driven) Turret interlock hydraulic Turret drive servo Tool change time 0,2 sec. Tool section 25x 25 mm Max speed of life tools 5000 rpm. Max power of live tools 5 kW Max milling capacity (shaft mill) 16 mm Max milling capacity (milling head) 50 mm Max drilling capacity D16 mm Max tapping capacity M16x2 Rapid speed Z axis 30 m/min Rapid speed X axis 30 m/min Position accuracy 0,008 mm Repeat accuracy 0,003 mm Tailstock Pinole conus MT4 Travel of tailstock body 565 mm Hydraulic tank capacity 20 L. Power of hydraulic pump 1,5 kW Hydraulic power 3,5 - 6 Mpa Volumen of lubrication 2 L Power of lubrication pump 25 W Coolant tank volume 130 L Power of coolant pump 25 W Motor power cont. 11 kW 400 Volt 50Hz Motor power short time (30 min) 15 kW 400 Volt 50 Hz Weight 4000 kg Dimensions LxWxH = 2600 x 1685 x 1768 mm Accessories Coolant unit, Turret for 12 driven tools, 200 mm hydr. chuck, Linear guides and ball screws THK/Japan, SHOP TURN, Spindle cooler, Chip conveyor, Tool presetter, automatic tool length compensation, barfeeder interface, air blowing for chuck and turret, high pressure coolant, oil selector.

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +150°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the chamber: ± 0.8 - 1 K Temperature change rate (with test sample: approx. 20 kg aluminum/plastic) Heating in the range: -40°C to +90°C: 4 K/min linear Cooling in the range: +90°C to -40°C: 4 K/min linear Data for climate tests: Temperature range: +10 to +95°C Humidity range: 10% RH up to 95% RH Temperature fluctuation over time ± 0.2 to -0.5 K Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +88°C Mechanical load data: Test chamber floor 150 kg Maximum chamber floor load 250 kg Test chamber dimensions: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating data: Test chamber lighting: 12 V, 20 W halogen bulb Dolqevclugjyy Rtskl Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated power 32 kW, Rated current 59 A External control via the RS 232 interface is also possible. Refrigerant: R404A / R23 Test chamber weight approx. 800 kg Machine set weight approx. 850 kg Weight: 1650 kg For your safety, please note the following information! The following procedures are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 1999, Condition: excellent (used), Drilling capacity (steel): 18mm Dolqyekytxzoy Rtskl Drilling capacity (cast): 23mm Thread cutting (steel): M14mm Spindle holder: MK 2 Spindle stroke: 100mm Extension: 250mm Column diameter: 90mm Power: 0.55 kW Spindle speed: 125 – 2400 RPM / 225 – 4300 RPM

Year of construction: 2004, Condition: excellent (used), For Sale Electric Chain Hoist - 12T. -2.8m/s. -Carl Stahl. -Link ∅ 16. -Motor 5.5kW 400V. Dkslqyy Rev Unuajtel -2004

Condition: used, Stöger Automation PESCE S&S bowl feeder 230V Dkolqswcar Seyy Rtel

Condition: new, bore capacity in steel (diameter) 23.0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm turning speeds 225 - 4300 U/min column diameter 90.0 mm distance spindle /table 140 / 670 mm engine output 0.6 / 0.95 kW Delqst Eivceyy Rtokl weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Year of construction: 2025, Condition: like new (used), Functionality: fully functional, Ref: 200-704-500 Usable range: 200/500 mm Power supply: 400 V Frequency: 50 Hz 3 Ph Power: 6.95 kW Total weight: 295 kg Dolqyyswb A D Us Rtskl

Condition: good (used), Year of construction: 2006, X 1000 mm , Y 600 mm Djlqyyeu Dmy Dj Rtjkl Parts shown by hand not come.

Condition: new, Aircraft AIRPROFI 1003/500/10 H Silent piston compressor For professional and industrial applications where a quiet working environment is required. DESCRIPTION Extremely quiet thanks to sound-insulated housing and additional silencer on the intake filter Suitable for installation even in noise-sensitive areas and the immediate working environment Two-cylinder high-performance unit made of gray cast iron with low speed guarantees particularly quiet and low-vibration operation: less wear and longer service life Large fan wheel on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior Intercooler and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation High-quality Condor pressure switch Equipped with glycerine pressure gauge, operating hours counter and fault display via LED lights Quality electric motor with motor protection switch and start-up relief Integrated phase monitoring Device for easy tensioning of the V-belt Service-friendly design Ready for connection with all fittings and safety devices Models with compressed air tank: Galvanized compressed air tank inside and out with 15-year guarantee against rusting through General information Air outlet¾" Dimensions and weights Length (product) approx.2020mm Width/depth (product) approx.980mm Height (product) approx. 1840mm Weight (net) approx. 410kg Electrical data Supply voltage400V Mains frequency50Hz Dslqyet H N Nljy Rtskl Output power7.5kW Input power8.71kW Noise emission Sound pressure level Lp64dB(A) Explanation Sound pressure levelSound pressure level at 1 m distance according to DIN 45635 T 13 Compressor Compressor systemHOS Suction capacity approx.1080l/min Filling capacity approx.770l/min Explanation Filling capacity at 6 bar working pressure Number of cylinders2 Number of compression stages2 Compressor speed1100min¯¹ Compressed air tank Maximum pressure10bar Tank capacity500l EQUIPMENT Drive transmissionV-belt Compressed air line materialFlexible armored hose line with heat protection Compressed air outletBall valve Compressed air tankHot-dip galvanized inside and outside with fifteen-year guarantee against rust AD 2000 compliantyes Tank baseSwinging elements Star-delta switch ✔

Condition: used, Year of construction: 2006, Type Scorpion (W/S) Year 2006 Dslqyy Revduazstskl In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 * 500 Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces Dolevxagceqyy Rtekl to be worked proceed uninterruptedly with axial feed through the rectification axial advancement through the grinding gap.

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK Delqyy Rjuhrcpstskl table: 515 x 360 mm turning speeds 225 - 4300 U/min engine output 1.0 / 1.6 kW column diameter 115 mm distance spindle /table 132 / 724 mm weight 260 kg Machine height 1790 mm Furnishing: - stepless speed adjustment - Reversing switch for R / L run - digital speed display - Connector and cable mounted - Spindle protection with electr. validation - 2 mtr. Connection cable with plug 16A

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 20-00220, Werth, Scope Check FB/D2400/500/350, 3D CNC coordinator measuring machine complete with Werth CPU console, monitors and keyboard, serial number: 20-00220, year of manufacture: 2020 Dslqyy Rjwcla Uetskl

Condition: new, GEKO 14000 ED-S/SEBA RSS cube power generator Note: Current delivery time approx. 6-9 months from receipt of order - subject to change without notice. Equipment: Standard 12V DC socket for connecting 12V consumers, powerful synchronous generator for high starting currents, carrying handles. 1 three-phase CEE socket (16A), 2 safety sockets (16A) Optionally with IT/TN mains switching Generator Synchronous el. Power: 3~ cos φ 0,8 13400 VA el. Power: 1~ cos φ 0,8 5900 VA Voltage 3~ 400 V voltage 1~ 230 V Current 3~ 17,3 A Current 1~ (CEE) 28 A Current 1~ (Schuko) 16 A Frequency 50 Hz Protection class generator IP 54 Engine type B&S 386447 Number of cylinders 2 Speed 3000 rpm Fuel type gasoline Engine oil capacity 1,7 l Engine power 13,2 kW Cooling engine/generator air/air Tank capacity 19.5 l Operating time: full load/half load 3,4/6,75 h Weight (ready for operation incl. battery) 147.5kg Dimensions L x W x H 820 x 440 x 580 mm Dslqyogibwmoy Rtekl Sound power level LWA 95 dB(A) Sound pressure level (10m) 67 dB(A) GEKO dealer - please send us your inquiry

Condition: used, STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell low price - good deal The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one Dkslqyysgmf R De Rtjl automatic tool exchange system and sometimes multiple pallets CNC type: Siemens Fourth axis: 2 + 2 Number of pallets: 2 Spindle speed RPM: 9000