Used Pegas Gonda 600 Camel X-Cnc-1000 for sale (66,626)

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Fjlq Sqjq Npqmexnjpg Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder Fjlq Sqxowcfgbonopg 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, turning length: 1,200 mm, turning diameter over cross slide: 350 mm, turning diameter: 350 mm, spindle motor power: 24,000 W, spindle speed (max.): 5,700 rpm, spindle bore: 120 mm, travel distance X-axis: 200 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 20,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Control: Siemens SINUMERIK 840D sl DSG-Filter RBF700_500, Industriefilter M 1600 EC, and IF-Vario M 1600 EC. Includes a bin/crate of extra spindles, 4 additional live tooling units, and other spare parts. Fpolqswa Ttwj Sqxnog

Year of construction: 2018, Condition: like new (used), Available because of excess capacity, this machine is in incredible condition and can ship immediately anywhere in the world. Please inquire with us for a price Ex Works, FOB, or CIF. Folq Sqxonkdtnsnopg

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. Felqsv Nw Npo Sqxnepg The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Year of construction: 1985, Condition: excellent (used), This presss is part of a two automated production lines for automóviles pannels, each line consist of five presses, 1x1600 Ton, 2x1000 Ton, 2x500 Ton, plus robots an federes, we can del the complete Line as apackage or each Press individually, all are KOMATSU Stamping Class A. Fslqefxx E Ij Sqxnopg

Condition: good (used), SPİNDLE HOLE DİA 1.3" POWER 7.5 hp Felq Sjrbl N Ejqxnjpg RPM 8,500 RPM # AXİS 8 CONTROL CNC (FANUC 32i-B Plus) Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Tool carrier 1: X1/Y1 travel mm | in 70/405 | 2.76/15.94 Counter spindle: X2/Z2 travel mm | in 300/200 | 11.81/7.87 Tool carrier 2: Y2 travel mm | in 135 | 5.31 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Maximum speed rpm 4,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 5.25/4.5 | 3.9/3.3 Tool holder on slide Y2 On station for back working Fixed/driven tools for back-working 4/4 (5/4)* Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Tool holder on slide 2 Fixed/driven tools for back-working 2/0 (0/2)* (0/1 for polygons)* Maximum speed rpm 4,250 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Machine Footprint m² | ft² 2.8 | 30.1 Machine height mm | in 2.085 | 82.09 Machine weight (including coolant tank) kg | lbs 3,550 | 7,826 Control system DMG MORI SLIMline Control with 10.4″ monitor FANUC 32i Automatic turning with 6 linear axes and 2 C-axis Main spindle with 8,500 rpm, 29.8 ft lb, 7.4 hp Counter spindle with 8,500 rpm, 10.3 ft lb, 3 hp Total of 41 tool stations 8 driven tool stations as standard Driven tools spindles 6,000 rpm, 2.2 ft lb, 1.3 hp Control panel with 10.4" color display and FANUC 32i-B Plus 2 control channels, 6 linear axes and 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously EQUIPPED WITH: Patriot 338 Edge Bar Feed Sliding Headstock Belt Type Chip Conveyor

Year of construction: 2000, Condition: used, machine/vehicle number: 30336, Article number: MA999 Manufacturer: Noble Type: Micromat 203 Year of construction: 2000 Machine number: 30336 Control: CNC he 1904 Length [mm]: 1500 Width [mm]: 1250 Height [mm]: 1650 Weight [kg]: 1600 Fpoledacqhoq Sqxnog Power supply: 380V Working hours [h]: 1858 Positioning range x/Y/Z [mm]: 760 X 310 Cutting force [to]: 20 2 piece of multimedia tools / 3 x / 6 x with various tools Accessories: manual / schematics

Year of construction: 2002, Condition: used, grinding diameter 10-300 mm grinding length 650 mm centre height 175 mm Control Fpolq Sqxeva I N Ueneg total power requirement 12 kW weight of the machine ca. 3,7 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter: 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Fslq Ssrtrlzsqxnjpg Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: used, machine/vehicle number: 006459, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 8.5 KW Folqenzrt Ro Sqxnjpg Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: excellent (used), Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM Fpjlq Sqxowif Rmjnog

Condition: excellent (used), Year of construction: 2022, Doosan DBM 2030 Bridge Mill Double Column and Bridge Type Machining Center Installed 2022 Control: Fanuc 31i-B, 15" Screen Fpelq Sqxsv Iq Hfsnog Contact us for specifications

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm Feljwidy Tsq Sqxnspg T1, T2=105.0 mm B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: used, Used GFT Trenntechnik model V30 Hastelloy C22 contact parts vertical basket centrifuge. Basket measure approximately 300mm diameter x 150mm straight side. Approximate capacity 5 litre and 8kg useful load. Unit is top load and unload with filter bag discharge. Has quick release cover / lid. Unit is bottom driven with electric motor. Unit is mounted on mobile trolley. Fjlq Sqxeun S Iyenopg

Condition: ready for operation (used), Year of construction: 1977, Functionality: fully functional, USED Webster Bennett CNC VTL with twin rams and Siemens 820T Year of Manufacture 1977. Retrofitted in 1995 – SERIAL NUMBER 6826/1 MACHINE CONSTRUCTION & FEATURES  TWIN RAM TYPE 2-AXIS VERTICAL BORING & TURNING MACHINE.  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY HARDENED & GROUND SLIDEWAYS TO PROVIDE INCREASED STABILITY & RIGIDITY.  3 STEP AUTOMATIC GEAR CHANGE.  SIEMENS 820T CNC CONTROL. INCLUDED FACTORY FITTED MACHINE OPTIONS  MANUAL 4-JAW COMBINATION CHUCK WITH 4 MANUAL ADJUSTABLE JAW BODIES  CHIP CONVEYOR & CHIP BUCKET INCLUDED TOOLHOLDERS  SET OF CAPTO C6 TURNING HEADS CAPACITY Maximum Turning Diameter Ø 3,650 MM Maximum Turning Height 2,130 MM Maximum Workpiece Weight 20,000 KGS TABLE Table Diameter Ø 3,050 MM Table Speed 0~ 60 RPM Table Speed Range AUTOMATIC 3 STEP RAM HEAD Tool Size 32 MM² Spindle Taper ISO 7/24 #50 Ram Cross Section 220 x 220 MM TRAVEL & FEEDRATE Left hand ram travel – U Axis (Saddle Horizontal) 3,911 MM Left hand ram travel – X Axis (Saddle Horizontal) 3,911 MM Z-Axis Travel (Ram Vertical) 965 MM Vertical Travel of Crossrail 1200 MM Maximum X / Z-Axis Cutting Feedrate 0-3,000 MM / MIN X / Z-Axis Rapid Feedrate 3,000 MM / MIN POWER SOURCE Input Power Supply 415V / 50HZ / 3PH DIMENSIONS & WEIGHT Fpjljwhqmdsq Sqxneg Height 5,650 MM External Width (With Chip Conveyor) 6,000 MM External Depth 4,700 MM Weight 48,800 KGS

Condition: used, machine/vehicle number: 007364, X axis working area: 3060 mm Y axis working area: 1320 mm Working Table: Pod and Rail Number of controlled axes: 4 axes Folq Sqxstz Hxasnepg Total number of drilling spindles: 20 Total number of tool changer positions: 10

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 300 h, Doosan Lynx 2100 LYB CNC Lathe Model: Lynx 2100 LYB Year: 2019 Control: Fanuc I Series Max. Turning Diameter:300mm Max. Turning Length:510mm Spindle Bore: 65mm Chuck Size: 200mm dia. Spindle Speed: 4500 RPM Fpslq Sowif Npjqxnsg Spindle Power: 15 kw Turret Stations: 12 Machine with: Swarf Conveyor Driven Tooling Virtually Unused Since New (Under 300 Hrs) Dimensions: 2800 x 1711 x 1850mm Weight: 3900 KGS

Condition: excellent (used), Year of construction: 2020, Doosan Puma TT2100SYY Mfd. 2020 Tooled as pictured Bar feed: FMB Turbo 565 (12ft) Mfd. 2019 Specifications SWING OVER BED 9.05" Felqevniaks Sqxnepg MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM MP SYSTEMS 1000 PSI HIGH PRESSURE COOLANT Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING SPECIFICATIONS: Machining Length     27.38"

Condition: refurbished (used), Year of construction: 2007, CNC MATRIX Machinable diameter 660 mm Machinable length 1045 mm Main spindle speed 5000 rpm Secondary spindle speed 5000 rpm Milling spindle speed 12000 rpm Tool magazine 40 tools CAPTO C 6 Cooling 70 bars C axis on secondary spindle ROBOT GL 100 F Chip conveyor CONCEPTS Fpjlq Sqor Iyb Tjxnog

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Fpoljkw H Ekjq Sqxneg Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: ready for operation (used), Butler Hi – Power Elgamill CNC Bed Type Milling Machine REFURBISHED AND RETROFITTED IN 2012 Model: HI – POWER Elgamill Year: Refurbished and retrofitted in 2012 Control: FAGOR Table Size: 5000 x 1200mm Long Travel: 3300mm Vertical Travel: 1000mm Cross Travel: 850mm Fpelq Sqewhcbajxnsg Spindle Taper: 50 INT Spindle Speeds: 30 – 2080 RPM Machine with: 26” dia. power rotary table.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Run less than one shift Cut Steel Fjlq Ssvnf Rfoqxnopg Standard tooling included

Condition: used, machine/vehicle number: 006280, X axis working area: 3665 mm Y axis working area: 1260 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 18 Fpeljkw H Egsq Sqxneg

Year of construction: 2011, Condition: good (used), ZPS TMZ 867 CNC Multi-Spindle SN: V867A0040 Mfd. 2011 Siemens Control PRA 100F Type: 42  With Riedel Chiller Absolent Mist Collector High Pressure Coolant Filtration system Fire Suppression System Fpslq Sqjk Nb Tgoxnjg Pickup Attachment IEMCA PRA 100 Bar Loader Stock Reel and Stand Slide Pos. 3:  X- Y- Z-Axes (with Motor) Slide Pos. 5: X- Y- Z-Axes (With Motor) Slide Pos. 8: X- Y-Axes (to get proper center height)