Used Pegas Gonda 440X600 Horizontal for sale (5,818)

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 500 mm saw band length 5200 mm total power requirement 2,2 kW weight of the machine ca. 1.8 t Dcsb Exrev Ey R Uobaog dimensions of the machine ca. 2,8 x 1,4 x 1,8 m

Condition: used, Year of construction: 1999, cutting diameter 300 mm Dobsv Ehcle Exrbaocg saw band length 4100 x 34 x 1,1 mm cutting width 300 mm cutting speed 10 - 130 m/min weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 2,0 x 1,75 m Hydraulic band saw machine with - Material feed 900mm - Emergency stop device

Condition: ready for operation (used), Year of construction: 1986, Packaging capacity: 40-100 packs/min, max. packaging dimensions X/Y/Z: unlimited/115mm/50mm, max. film width: 590mm, machine dimensions X/Y/Z: approx. 3500mm/1000mm/1800mm, weight: approx. 800kg. Including infeed conveyor 2550mm/120mm with indexing, carton inserter, infeed chain approx. 2000mm and photocell Sick. Documentation available. On-site inspection is possible. Dcob Exov E Rbderbajg

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, CNC Lathe - Horizontal / Brand: GEMINIS / Type: GEMINIS GT9 G2 (heavy series) / Year of construction: 2015 The machine can be inspected by appointment under power. Dob Exrjvuih Ujbaocg TECHNICAL DATA: - Max swing over bed: 2.000 mm - Distance between centers: 8.000 mm - Height of centres: 1.050 mm - Swing over slide: 1.600 mm - Main spindle bore Ø: 150 mm - Main spindle nose: DIN 55026-15 - Speed range: 4 - Speed range I: 0-80 rpm - Speed range II: 0-175 rpm - Speed range III: 0-350 rpm - Speed range IV: 0-700 rpm - Cross slide travel: 1.060 mm - Quill Ø: 400 mm - Quill travel: 300 mm - Max. weight allowed between centers: 30 tons Machine base: - Distance between the guideways: 1.350 mm - Height of the machine base: 650 mm EQUIPMENT / ACCESSORIES: - CNC-Control: FAGOR 8065 - Independent 4-jaw chuck: Ø 1.600 mm - Set of hard inner and outer claws - Square automatic turret: SAUTER 4 pos – Ø 320 x 320 mm - Tailstock and quill: Motorised - Quill placement: Built-in Rotating - Automatic Locking/Unlocking of the tailstock body - Air conditioner for electronic cabinet - Portable electronic handwheel - Chip conveyor - 4-support Closed steady rest: Ø 500-900 mm - Permissible weight allowed for steady rest: 10 tons - Prepared for C-axis with transmission from main engine - Preparation for subsequent adaptation of a milling head with Y axis on turret - Preparation for rectifier head assembly - Very well-equipped with tools Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Dsbjuddgfo Exrbascg Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: excellent (used), Year of construction: 2013, operating hours: 29,258 h, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 630 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline Operate, table width: 500 mm, table length: 500 mm, table load: 600 kg, rotational speed (max.): 18,000 rpm, CNC controller: SIEMENS 840D solutionline Operate Axes X-axis travel mm: 630 Y-axis travel mm: 800 Z-axis travel mm: 850 Worktable Number of pallets: 12 Table dimensions mm: 500x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18.000 Cooling Cooling through the Spindle Center: 80 Tank capacity: 980 Tool system Tool holder: HSK-A63 Tool magazine slots: 303 Equipment Chip conveyor Infrared probe (RENISHAW OMP60) Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function High pressure pump Tool breakage probe CE conformity Djb Exsu Aaqyorbascg Coolant gun Round pallet storage RS12 MPC Machine Protection Control Machine running times Under power: 46.048 Spindle Working: 29.258

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t Debjn Srxqs Exrbaocg dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: used, Year of construction: 1999, cutting diameter 360 mm saw band length 4420 x 34 x 1,1 mm cutting width 360 mm cutting speed 15 - 90 m/min 3,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,35 x 2,3 x 1,75 m Djb Exrbjv Ehcfjascg Hydraulic band saw machine with - Material feed 800mm - Motorized saw blade tension - Emergency stop device

Condition: like new (used), Year of construction: 2023, operating hours: 2,800 h, Table size 1500 x 1250 mm Pinole diameter 110 mm Tool holder DIN 69871 ISO 50 X-axis travel 2200 mm Y-axis 1600 mm Z-axis 1600 mm W-axis 550 mm Table load 5000 kg Feed rate up to 10 m/min Rapid traverse 12 m/min Speed range 35 - 3,000 rpm Drive power (30/60 min) 20 / 30 kW Machine dimensions L x W x H 7750 x 4715 x 3700 mm Weight 22,500 kg New price: 500.000,00 € + VAT Delivery time: on request Dcjb Exrbsqy H Iajajg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2023, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size. Dsb Exrbevn U Uaeascg

Condition: used, Year of construction: 2001, x-travel 650 mm y-travel 650 mm z-travel 650 mm Control Sinumerik 840D weight of the machine ca. 12 t 1 horizontal machining centre Make: HECKERT type: CWK 400D year 2001 serial no. 18445, control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 650 x 650 x 650 mm 2-fold pallet changer pallet size 400 x 400 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Deb Exreuddk Robajcg Operating hours 57,806 Spindle hours 1.970 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, preparation for infrared probe,

Year of construction: 2023, Condition: new, XCMG XZ230 horizontal drilling rig The most popular drilling rig in Poland. Towing capacity - 24T Radio Control Air-conditioned cabin 100 pieces of poles 3 reamers + housing and ALBRECHTA remote control We create bentonite mixers ourselves. Possible installation on the customer's plate. Delivery time up to 7 days. Dob Exrbenvdpyoajcg FAST, CHEAP, NO PROBLEM Service in Poland and Europe.

Condition: good (used), Well-maintained horizontal creel. Dcebounhl Uj Exrbajg Passage 1000 mm. Stroke 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation.

Condition: used, Year of construction: 2000, cutting diameter 250 mm Dcob Exev Ehdvsrbaeg dimensions of saw-band 2825 x 27 x 0,9 mm cutting speed 35 / 70 m/min weight of the machine ca. 0,35 t dimensions of the machine ca. 1,6 x 0,8 x 1,5 m Band saw - Miter cuts up to 60° left - Vice with quick-clamping device - Electric automatic cooling

Condition: used, Spindle dia. 125 mm Spindle quill movement 740 mm Table size 1525 x 1400 mm Max. table load 6000 kg Length movement 1650 mm Cross movement 2000 mm Spindle speeds 7-1000 rpm (2 gears) Main motor power 25 Hp Weight 18 ton Dcsbjtvh Axs Exrbajg Control: Heidenhain TNC 155 Equipped with: Angle plate 20 toolholders (see photos)

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Dcsb Exrbjg Uq Dfeajg Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for Djb Exeuddcasrbascg conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. Deb Exrbevr Stujajcg The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: excellent (used), Year of construction: 2006, operating hours: 23,200 h, Functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, This machine center works dry Disconnected from electricity one month ago Machine worked until 01/2025 No IKZ no inner cooling through spindle The machine only worked 1 shift over it’s lifetime and is in amazing condition Accuracy report of workpieces available on request Almost new-like condition, dismantling done by highly skilled specialists NC Backup, System Backup, digital instruction everything already prepared and already set with the machine X/Y/Z mm 630 / 630 / 630 Spindle HSK63 speed 16.000 rpm B axis 360.000° Tool magazine with 160 tool places 12 pallet pool Internal cooling and high pressure unit Mechanical tool breakage control Dcjb Exrbev H D Umeaeg Brankamp available Filtration system Extraction system Chip coneyor Installation elements/Fixators BW User guide / Documentation Machine parameters on storage medium

Condition: used, Year of construction: 2007, cutting diameter 220 mm dimensions of saw-band 2625 x 20 x 0,9 mm cutting width 220 mm cutting speed 30 + 60 m/min 220 mm stroke back stop 210 mm cross-slide 230 x 185 total power requirement 0,8 kW Dsb Eov Ehcrexrbajcg weight of the machine ca. 0,2 t dimensions of the machine ca. 1,2 x 0,8 x 1,3 m Band saw - Miter cuts up to 60° left - Vice with quick-clamping device - Electric automatic cooling

Condition: like new (used), Year of construction: 2022, Stierli bender 120 CNC Horizontal bending machine, Siemens controller Working force 12 tons Very universal, for flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools. tool height 130 mm Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Backgauge length stop 1000/2000mm Dcsb Eoflc R Ujxrbasg Program memory 200 programs Bending sets 10 bends Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Year of construction: 1985, Condition: not inspected (used), Offered here is a two-column horizontal milling machine from the company Reichle & Knödler. Data: Dcjb Exog Umcqsrbaeg Manufacturer: Reichle & Knödler Type: FR.4.100x350x3000 Year of manufacture: 1985

 Control: Siemens Sinumerik Primo S

 travel X-axis: 3000mm 
traverse path Y-axis: 1000mm travel Z-axis: 1000mm weight: 18t
 dimension: 9200 x 3200 x 2750 Drive power (spindle): 30kW spindle: 1 piece steep taper: 60 clamping surface: 3000 x 710mm accessories: Control cabinet Coolant tank 7 milling shafts Note: It is possible to work only with milling shaft

Condition: as good as new (ex-display), Year of construction: 2022, Stierli bender 120HE horizontal press Dceb Exrbjflc R Djaog Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2022 incl. hand and foot pedal Machine as good as new

Year of construction: 1999, Condition: like new (used), Functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence Dcjber A Hcbo Exrbaeg - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Year of construction: 1971, Condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 Dcjb Exrbehpqquoaeg -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to