Used Pegas Gonda 360X600 Horizontal X for sale (52,603)

Condition: used, Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 7002, turning diameter: 800 mm, turning length: 2,800 mm, Used STANKO 1A64 x 2800 lathe, in very good technical condition, including NEWALL Digital Readout and extensive equipment and accessories. Technical specifications: Turning diameter over bed: 800 mm Turning length: 2800 mm Dcsb E Shbjv Iypvjxjg Equipment: 1 x Steady rest 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x NEWALL Digital Readout

Condition: used, HSK - Motor-driven guillotine shear: - Motor: Dietz 380-3-50, 2.2 kW - Stroke rate: 100 rpm - Weight: approx. 700 kg - Driven by brake motor - Cut initiated by a movable foot switch Deb Eov Tm Hls Shbxocg - Shear table with support table extended to approx. 600 mm - Side stop TA 500 with scale - Folding rear width stop ZA 500 - Manually adjustable. The stop can be raised for long sheets. - Fully installed and ready for use Additional: Pneumatic hold-down device

Condition: good (used), Functionality: fully functional, machine/vehicle number: 804, sheet thickness steel (max.): 16 mm, sheet thickness (max.): 16 mm, overall weight: 12,500 kg, bending length: 2,500 mm, roller length: 2,550 mm, 3-roll bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Number: 804, overhauled in 1987 The machine has a very sturdy construction and was only used for one shift. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Conical bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Dceb E Sevxbm Rjhbxeg A step frame for the machine is also available for purchase.

Condition: used, mileage: 160,000 km, power: 353 kW (479.95 HP), first registration: 09/2021, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 09/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, For sale are 2 x DAF Super Space Cabs Dcjbjwcimro E Shbxog FIRST HAND * Production 2021 * First registered 09-2021 * New service * Front tires: 385/55 R22.5 GOODYEAR NEW!!! * Rear: 315/70 R22.5 (70%) * Original mileage: 160,000 km and 190,000 km * Intarder and ZF automatic transmission * Refrigerator * Luxury bed * 2 fuel tanks = 1290 liters * Ready for on-board computer (OBU) * Luxury driver's seat * Spoiler * Rear axle with air suspension * Front leaf spring * 3 keys with remote central locking VERY CLEAN and well-maintained vehicle If you have any questions, you can reach us during the day: Richard Kanwischer (phone and WhatsApp: German and English) Paul: Phone and WhatsApp: German, ?????, ?????, English) Paul: Viber: German, ?????, ?????, English)

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Dsbjd Akygo E Shbxocg Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: ready for operation (used), General Manufacturer INOX - MAURER AG Location Outdoor storage (57234 Wilnsdorf) Condition used Tank volume 25,000 liters Max. admissible operating temperature 50 °C Design upright Standing shape Feet Number of feet 3 pieces Djb E Sov Rymyjhbxocg Technical data / dimensions Internal diameter 2,600 mm Total height 5,900 mm Wall thickness of base 6.9 mm Wall thickness of cylinder 6 mm Equipment Technical documents Drawing, various documents Manhole / dome in cylinder, in top plate Type plate Equipment Crane eyes Outlet available Remarks Manhole cover plated Remarks Test pressure + 4 bar

Condition: new, Working width: 2540 mm Bending capacity (St42): 3.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 3.7 kW Weight, approx.: 3900 kg Dimensions LxWxH, approx.: 3850 x 1700 x 1860 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment Dcjb E Seqa Ad Iohbxog - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: ready for operation (used), General Manufacturer INOX - MAURER AG Location Outdoor storage (57234 Wilnsdorf) Condition used Dob E Ssv Rzl Djhbxocg Tank volume 25,000 liters Max. permissible operating temperature 50 °C Specific weight of the medium 1.2 (to/m³) Bottoms Dished bottom Design upright Standing shape Feet Number of feet 3 pieces Insulation Insulation available Insulating jacket riveted Technical data / dimensions Internal diameter 2,600 mm Total height 5,900 mm Wall thickness of base 6.9 mm Wall thickness of cylinder 6 mm Equipment Technical documents Drawing, various documents Manhole / dome in cylinder, in top shelf Type plate

Condition: new, Working width: 2035 mm Bending capacity (St42): 6.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 35 mm Hydraulic motor drive power: 7.4 kW Weight, approx.: 3710 kg Dimensions LxWxH, approx.: 3300 x 1550 x 1900 mm Dceb E Shoqa Aa Ijbxog The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: ready for operation (used), General Condition Used Location Bremen Miscellaneous Manufacturer: KSBType: Etanorm-RG horizontal centrifugal pumpMax. Delivery rate: 500 m3Max. Delivery head: 65 mSpeed: 1488 rpm Djbjv Rzcpo E Shbxocg Product data Manufacturer KSB Overall height 1,100 mm Overall length 2,250 mm Overall width 900 mm Remarks Pumping of clean or aggressive liquids that do not chemically or mechanically attack the pump materials, e.g: Water supply systems; cooling circuits; swimming pool technology; fire extinguishing systems; irrigation systems; drainage systems; heating systems; air conditioning systems; sprinkler systems

Condition: new, Working width: 2540 mm Bending capacity (St42): 4.5 mm Dob E Shbsp Eb Dksxscg Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 30 mm Hydraulic motor drive power: 5.5 kW Weight, approx.: 5100 kg Dimensions LxWxH, approx.: 3900 x 1700 x 1900 mm Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: ready for operation (used), General Location: Outdoor storage Condition: Used Container volume: 16,300 liters Vacuum: 1.0 bar Max. overpressure: 0.50 bar Max. permissible operating temperature: 50 °C Design: Horizontal, Floor-standing, Saddle-shaped Technical data/dimensions: Inner diameter: 1,800 mm Outer diameter: 2,000 mm Cylindrical length: 6,000 mm Equipment: Technical documentation: Drawing, available, Nameplate, Equipment: Crane eyes, Outlet: Available, Outlet: 100 mm Dobjv Rzhls E Shbxscg Material: Material in contact with the product: V2A 1.4301 (AISI304)

Condition: new, Working width: 4010 mm Bending capacity (St42): 2.0 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier Dceb Eop Dufzj Shbxsg - Oil filling - Documentation - CE

Condition: ready for operation (used), General Location Outdoor storage (57234 Wilnsdorf) Condition Used Deb E Shbov Rzmusxjcg Tank volume 27,300 liters Vacuum 0.6 bar Max. permissible operating temperature 50 °C Design upright Standing form Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 2,800 mm Wall thickness of base 8 mm Wall thickness of cylinder 7 mm Equipment Technical documentation Drawing Manhole / dome in the cylinder, in the upper base Type plate Outlet available Remarks Wall thickness of the lower base of the upper container 11 mm Last intended use Pharmaceutical chemistry Material properties Material in contact with product V2A 1.4301 (AISI304) Material feet Stainless steel

Condition: ready for operation (used), General Location Bremen Condition used Tank Volume 30,000 liters Horizontal design Standing shape Saddles Technical data / dimensions Internal diameter 3,100 mm Cylindrical length 3700 mm Total length 5,000 mm Wall thickness of bottom 3.7 mm Wall thickness of cylinder 3.0 mm Dceb E Sov Rzpcohbxjg Equipment Equipment Spray head Outlet 65 mm Remarks 2 loose bearing shells each made of Fe (galvanized); 1 manhole each approx. 350 x 445 mm in the front base; stronger dents in each cylinder Material Properties Material in contact with product V2A 1.4301 (AISI304)

Condition: ready for operation (used), General Manufacturer GEA Location Bremen Condition Used Other GEA NT 100 X BC-10Compartment 1:- Volume: 321.66 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Compartment 2:- Volume: 318.09 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Total length: approx. 2,850 mm- Total width: approx. 700 mm- Total height: approx. 2,230 mm- 2 base plates missing Dobsv Ryrvs E Shbxecg Heat exchanger exchange surface 241.4 m² last intended use dairy Type plate Year of construction 2015

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 19,100 liters Max. Max. overpressure 4.0 bar Max. permissible operating temperature 70 °C Horizontal design Standing shape Saddles Technical data / dimensions Internal diameter 1,990 mm Cylindrical length 5640 mm Total height 2,500 mm Total length 6,500 mm Equipment Manhole / dome on the container Type plate Equipment Crane lugs Outlet not available Remarks Diameter of manhole approx. 500 mm; 1 welded-on and 1 loose bearing shell made of Fe; protective coating on the outside of the container; adhesions inside the container last intended use Phosphoric acid Deb E Shev Rymgjbxecg Material Properties Material in contact with product Steel

Condition: ready for operation (used), General Location Bremen Condition used Tank volume 21,000 liters Horizontal design Standing form Saddles Insulation Insulation available Insulating jacket screwed Insulating jacket material Galvanized steel Technical data / dimensions Internal diameter 2,900 mm External diameter 3,180 mm Cylindrical length 3,000 mm Total height 3,450 mm Total length 4,100 mm Wall thickness cylinder 3 mm Features Manhole / dome in cylinder (approx. 350 x 450 mm) Type plate Outlet 110 mm Note Dents on insulating jacket Remarks One of the two containers has a total length of approx. 4,950 mm due to a protruding connection; wall thickness of base at manhole Dcjb E Shsv Rzi Aobxjg

Condition: ready for operation (used), General Manufacturer GEA Location Bremen Condition Used Other GEA NT 100 X BC-10Compartment 1:- Volume: 321.66 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Compartment 2:- Volume: 318.09 liters- max. permissible pressure: 10 bar- max. permissible temperature: 100° C- Total length: approx. 2,850 mm- Total width: approx. 700 mm- Total height: approx. 2,230 mm- 2 base plates missing Dcjb E Shjv Ry Ttobxog Heat exchanger exchange surface 241.4 m² last intended use dairy Type plate Year of construction 2015

Condition: ready for operation (used), General Manufacturer INOX - MAURER AG Location Outdoor storage (57234 Wilnsdorf) Condition used Dcsb Esv Rzlwe Shbxog Tank volume 25,000 liters Max. admissible operating temperature 50 °C Design upright Standing shape Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 2,600 mm Total height 5,900 mm Wall thickness of base 6.9 mm Wall thickness of cylinder 6 mm Equipment Technical documents Drawing, various documents Manhole / dome in cylinder, in top plate Type plate Equipment Crane eyes Outlet available Remarks Manhole cover plated Remarks Test pressure + 4 bar

Condition: ready for operation (used), General Manufacturer Hinke Location 6250 Kundl, Austria (dismantling in March/April 2025) Condition used Deb E Ssv Rznfjhbxocg Tank volume 29,250 liters Vacuum 0.25 bar Max. Max. overpressure 1.0 bar Max. permissible operating temperature 100 °C Dished ends Dished ends Horizontal design Stand shape Saddles Technical data / dimensions Internal diameter 2,400 mm Cylindrical length 5800 mm Total length 6,800 mm Equipment Technical documents Drawing, various documents Manhole / dome on the tank Type plate Equipment Spray head, crane eyes Outlet flange DN100 Remarks Manhole diameter: approx. 600 mmm; saddles made of 1.4301 (V2A)

Condition: ready for operation (used), General Manufacturer Rieger Location Outdoor storage Condition Used Container volume 36,000 liters Horizontal design Standing form Feet height-adjustable Number of feet 6 pieces Technical data / dimensions Internal diameter 3,080 mm Cylindrical length 4,200 mm Total height 3,600 mm Total length 5,500 mm Wall thickness of base 5 mm Wall thickness of cylinder 3 mm Equipment Technical documentation Drawing Spout 100 mm Remarks 1 manhole approx. 320 x 420 mm in the front base; total length and total height as per drawing; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand-new residual drain valves, sampling valves and manhole seals were installed. last intended use Wine storage Material Texture Surface Exterior marbled Dob E Shbjv Rzp Njxscg

Condition: ready for operation (used), General Location Outdoor storage (57234 Wilnsdorf) Condition Used Tank volume 27,300 liters Vacuum 0.6 bar Max. permissible operating temperature 50 °C Design upright Standing form Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 2,800 mm Wall thickness of base 8 mm Wall thickness of cylinder 7 mm Equipment Technical documentation Drawing Manhole / dome in the cylinder, in the upper base Type plate Outlet available Remarks Wall thickness of the lower base of the upper container 11 mm Last intended use Pharmaceutical chemistry Dcjb E Shbov Rym Hjxjg Material properties Material in contact with product V2A 1.4301 (AISI304) Material feet Stainless steel

Condition: ready for operation (used), General Manufacturer Rieger Location Outdoor storage Condition Used Container volume 48,000 liters Horizontal design Standing form Feet height-adjustable Number of feet 6 pieces Technical data / dimensions Internal diameter 3,080 mm Cylindrical length 5,700 mm Total height 3,600 mm Total length 7,000 mm Wall thickness of bottoms 5 mm Equipment Technical documents Drawing Spout 100 mm Remarks 1 manhole approx. 320 x 420 mm in the front base; wall thickness of cylinder: 3-4 mm; total length and total height as per drawing; containers were professionally cleaned and overhauled by the manufacturer in 2024; brand-new residual drain valves, sampling valves and manhole seals were installed. last intended use Wine storage Material Texture Surface marbled on the outside Material in contact with the product Dsb Eev Rzrke Shbxjcg

Condition: ready for operation (used), General Location Bremen Condition used Tank Volume 30,000 liters Horizontal design Standing shape Saddles Technical data / dimensions Internal diameter 3,100 mm Cylindrical length 3700 mm Total length 5,000 mm Wall thickness of bottom 3.7 mm Wall thickness of cylinder 3.0 mm Equipment Equipment Spray head Outlet 65 mm Remarks 2 loose bearing shells each made of Fe (galvanized); 1 manhole each approx. 350 x 445 mm in the front base; stronger dents in each cylinder Deb E Shev Ry Tgobxecg Material Properties Material in contact with product V2A 1.4301 (AISI304)