Used Pegas Gonda 290X290 A-Cnc-Lr-F for sale (16,913)

Condition: used, Year of construction: 2019, Pig tongs, stunning tongs with transformer, recording device, and wall mount, used. Year of manufacture: 2019. Fully functional. Pig tongs are suitable for slaughtering pigs, sheep, and poultry. Voltage: 230 V Cgolisv S H D Ijk Rgfjt Protection class: IP 54 Power: 1.2 kW Back-up fuse: 16 A Frequency: 50 Hz

Condition: good (used), Year of construction: 1997, SACHMAN T22 FIXED BED MILLING MACHINE FIDIA CNC SIEMENS DRIVE CABINET X 3000 Y 1400 Z 1500 AUTO HEAD 2.5° X 2.5° cooled head spindle speed 4000 rpm - 27KW chip conveyor machine weight 20600 kg footprint 7700 x 4800 x 4117 high Cgjlik Rovzlt Hsgfet machine visible in Italy. very good condition

Condition: ready for operation (used), Year of construction: 1988, New Fanuc OT CNC in 2017 with manual guide Cslik Rgov Racbsfogt Electrical cabinet, new motors in 2017 2500mm diameter plates, 2750mm paxi passage 1500mm height passage Maximum plate rotation speed: 100 rpm Grinding spindle

Condition: ready for operation (used), For sale is the Weyrach CNC drilling center with a Siemens Sinumerik 805 control system. The machine is in working order. The machine has been inspected and tested for functionality (see service report). Drive and control components are available upon request from Allemdninger and can also be repaired and replaced if necessary. Weight approx. 5-6 tons Machining area approx. 800 x 5000 mm Machine dimensions: approx. 6500 x 1400 x 2500 mm Cgelik Rgeuphy Isfst Sold without warranty, ex works, duty unpaid. SPECIAL PRICE €5,550 plus VAT

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 2516, nominal power (apparent): 45 kVA, controller manufacturer: Germany Beckhoff, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, number of spindles: 15, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. Cgolijwcu Afek Rgfot - Multilateral automatic continuous bending. -Automatic programming software can finish all the process - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Condition: used, Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: Cgjlsvzhi Djik Rgfjt - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: excellent (used), S & A Test Chamber Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability Cgjlik Rgjn Arl Sofjt ± 0.2 ° C (including effects of mains voltage, ambient temperature between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2012, - 3-axis CNC center SCM Pratix S - model PRATIX 12B from 2012. Cgelik Rjuu Ntgogfet - Range X, Y, Z axes: 2500x1250x150+ mm - Number of tool spaces in the magazine: 8 - Machine table: Raster aluminum table, 2 sections. - Control: PC control - Software: SCM NESTING, SCM XILOG MAESTRO - Serial no.: AH/115920 Number of milling axes: 1 Drilling unit: 1 - practically unused Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Main engine: 6.6 kW Table measurements: 130 cm x 260 cm Portal construction: Machine with movable portal Vacuum pumps: 2 pcs. BECKER from 2012 - one placed outside, the other installed in the machine. Vacuum pump capacity m³/h: 240/280 m³/h. Interface for reading CAD format (.dxf) Security: Rejects Weight approx. 2,500 kg Length: 5,900 mm Width: 2,790 mm Height: 2,190 mm Automatic tool length measurement

Condition: used, Stainless steel hoppers (original Arburg) for Arburg machines in various sizes with clamping piece and bar (not available for all) Colikouhit So Rgfogt lightly used hoppers (almost as new) available in these sizes: hoppers capacity 50 liters (corresponds to Arburg part number: 103307) - 7 pieces price per piece EURO 200,00 hoppers capacity 100 Liter - 3 pieces price per piece: EURO 250,00

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer: Buck Maschinenbau GmbH !!! Spring Special Offer €108,000!!! • Machine number: 00-1646/1 • Working area (mm): X 1600, Y 1200, Z 1600 • Manual W-axis 500 mm, B-axis, A-axis pivotable 19° • Fully enclosed machine • Chip conveyor and high-pressure coolant system • SK50 tool holder • Heidenhain TNC 430 control system Cslikou Hzqcs Rgfegt • Table load: 10 tons workpiece weight • Spindle speed: 6,000 rpm • Rapid traverse speed: 20 m per minute • Tool changer for 20 tools • The machine can be inspected with power on at any time by appointment

Condition: used, Technical details: Cgolik Reva Higogfjt bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine Cjlik Revw Dqpsgfegt - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: good (used), Here we offer you a S & A test chamber for parametric testing. Temperature range -55 ° C to 200 ° C (LCO2) -65 ° C to 200 ° C (LN2) Temperature change rate 15° C / min (Standard Option) 60° C / min (Fast Option) Stability ± 0.2 ° C (including effects of mains voltage, ambient temperature between between 15° and 45° C and aging) Uniformity ± 1.0 ° C Max from -65 ° C to -55 ° C ± 0.5 ° C Max from -55 ° C to + 125 ° C ± 1,0 ° C Max from + 125 ° C to + 200 º C Coolant: LCO2 Chamber can be controlled remotely via IEEE bus or RS232C interface Cgjlik Rocnic Dsgfjt Weight approx. 61 kg Type: 4365A Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer gladly on the phone for you.

Condition: used, Year of construction: 1980, Functionality: fully functional, Equipment: documentation/manual, Maximum cutting height 200 mm Cgjliev Rf N Hok Rgfet Training belt width 350 mm 2 motors with 37 kW per unit Maximum blade diameter 300 mm New automatic lubrication with electric pump Dimensions length/width/height 3000 x 2300 x 1900 mm Weight approx. 5000 kg Comes with many accessories, including saws, bushes, and spacer rings

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, working width: 1,200 mm, saw blade diameter: 80 mm, working height: 910 mm, workpiece height (max.): 180 mm, rotational speed (max.): 3,000 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working width: 1,200 mm Working width with single belt: 70 mm Working thickness: 180 mm Working height: 910 mm Driver spacing: 420 mm Cgolik Rjv I S Udjgfst Clearance between belt and column: 180 mm Adjustable feed speed: 3 - 18 m/min Adjustable speed of the movable column: 2 m/min Electric spindle Speed: 3,000 rpm Power: 1 - 13 kW Shaft diameter and length: 40 x 55/95/118 mm Saw blade bore diameter for scoring saw and hogger: 60-80 mm Belt drive Speed: 6,000 rpm Power: 2.2 - 9.2 kW Spindle diameter and length: 40 x 55/95 x 118 mm mm EQUIPMENT - Saw unit - Milling unit - Soundproof enclosures

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Cgelik Rovy A Tnjgfot Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: excellent (used), Year of construction: 2019, overall weight: 400 kg, negative pressure: 31,000 Pa, volume flow: 1,250 m³/h, frequency: 50 Hz, Equipment: type plate available, Lajac CE-13F Extraction unit, with frequency converter vacuum unit suction unit manufacturer: LAJAC type: C13F with frequency converter motor power: 13Kw supply voltage: 400v 50Hz safety selec. 35A air flow: 1250m3/h negative pressure: 30 kPA CE is a high-quality plug and play extraction unit, with good filter technology. The extraction unit is preferably used for: Cleaning in industry and construction Central vacuum cleaning Dust and smoke extraction Welding fume extraction Swarf extraction: wood, metal, plastic, etc. The extraction takes place in two steps: Coarse separation by the cyclone Fine separation in a pleated conical cartridge filter separate control cabinet equipped with a frequency converter. Technical data: ESAM UNIJET 1000 Vacuum pump motor power: 13Kw Colik Rsvmtyxegfegt supply voltage: 400V safety select.: 35A air flow: 1250m3/h negative pressure: 31 (kPa) filter area 10 m2 dust container volume: 40Liter filter type polyester BIA filter class USGC (99.9% filter efficiency) filter cleaning automatic noise level (dB) 74 height (cm) 193 width (cm) 60 length (cm) 120 atmospheric pressure 61/s 5 bar Ø suction and outlet 100 mm Ø with air pressure 6 mm

Condition: as good as new (ex-display), Number: AAL 130426 Length: 1,000 mm Storage diameter: 170 mm Cone intake: 46 to 64 mm diameter 70 mm length Speed: 8,000 U/min Condition: Unused Coled Nlagoik Rgfegt Use: For large Chevalier grinding machine FSG 2460 CNC

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cgelikjcnic Sj Rgfjt Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Type: 4220A Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2017, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 300 mm, total height: 1,700 mm, total length: 2,220 mm, total width: 1,500 mm, table width: 1,500 mm, table length: 1,700 mm, overall weight: 800 kg, spindle speed (max.): 24,000 rpm, Gantry milling machine for processing wood, plastic, and aluminum panels, complete system with PC programming station, measuring probe, radio remote control, Festool dust extraction station (without vacuum cleaner), CNC programs Constructcam-3D and Kinetic-NC Cjlik Rov I Duisgfsgt

Condition: used, Technical data: Max cutting width: 400mm Max cutting height: 200 mm Max saw blade diameter: 420 mm Shaft diameter: 80mm Smooth feed adjustment Anti-reflection protection Extraction port: 250 mm Safety switch Power: 400V Power of the main engines: 2x45 kW Total power: 92 kW Manufacturer: Demak Cgolikoitvbls Rgfjt Overall dimensions: Length: 2500mm Width: 1900mm Height: 2100mm

Condition: excellent (used), Year of construction: 2013, First commissioned: 2013 Control: Heidenhain iTNC 530 including handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH20 Spindle power: 45 kW Spindle speed: max. 25,000 min-1 Torque: 67 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y, Z axes: up to 60 m/min Axis acceleration X, Y, Z axis: up to 5 m/s2 Connection data Connection power: 180 kVa Pre-fuse: approx. 290 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Description: Additional equipment Cgjlisvy A Tbjk Rgfjt - Coolant supply with belt filter system - 50-way chain tool changer - Work area cover - Chip conveyor - Emulsion mist extraction system from LTA Optional for an additional charge: - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Condition of the Machine Fully functional, very good condition. Already dismantled and stored.

Condition: used, Worm gear, bevel gear Cslikeudywgs Rgfogt Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Voltage: 50 Hz V 230/400v Power consumption: A 49.50/16.50 Speed: 3000 rpm Gear ratio (i): 27.88:1 weight: 36 kg

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 200 mm Max średnica piły: 300 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Króciec odciągowy: 2x220 mm Wyłącznik bezpieczeństwa Moc silnika wału górnego: 55 kW Moc silnika wału dolnego: 55 kW Zasilanie: 380 V Obroty silnika: 2800 obr./min Cjlik Rgjichkcjfjgt Producent: A.Costa Wymiary całkowite: Długość: 2700 mm Szerokość: 2220 mm Wysokość: 1650 mm

Condition: refurbished (used), Dear customers, currently we offer you deflection rollers as well as drive rollers for profile belt sanding machines of the brand F. Zimmermann. The rollers were newly coated, with a more robust material for better durability, then crowned sanded and newly stored. The rolls fit the following machine types:Zimmermann PS0, year of manufacture independentZimmermann PS1, year of manufacture independentZimmermann PS1/2, year of manufacture independentZimmermann PS S, year of manufacture independentWhen ordering, please always specify the machine type and which rolls you require and in what quantity. We have everything in stock and can deliver at short notice, if you have any further questions please do not hesitate to contact me! Cslik Rgsd S Eb Aofsgt