Used Pegas Gonda 240X280 A-Cnc-F for sale (14,498)

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch Cjbofnvvievr Idwegt - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm stroke:200 mm power capacity:15 kW Csbvscxxmkor Idwsgt piston stroke:200 mm :450 mm table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t

Condition: excellent (used), The Treif Fox CE is a versatile portion cutter designed for precise slicing of various food products, including meat (with or without bones), poultry, fish, cheese, vegetables, and fruits. Its key features include: Cutting Capacity: The machine can achieve up to 180 cuts per minute, enhancing productivity in food processing operations. Adjustable Slice Thickness: It offers stepless adjustment of slice thickness ranging from 5 mm to 30 mm, allowing for flexibility in meeting different product specifications. Product Accommodation: The Fox CE can handle products with a maximum length of 660 mm, width of 160 mm, and height of 190 mm, accommodating a variety of product sizes. Cgsbvjvprx Ejr Idwot Temperature Range: It is capable of slicing fresh, chilled, or slightly frozen products down to -4°C (24.8°F), providing versatility across different product states. Construction and Design: Constructed entirely from stainless steel, the machine ensures durability and meets high hygiene standards essential in food processing environments. Ease of Use: The Fox CE features a user-friendly design with simple operation, making it suitable for various sectors, including butcheries, supermarkets, and food processing plants. Power Specifications: The machine operates with a connected load of approximately 1,5 kW, ensuring efficient energy consumption during operation. These features make the Treif Fox CE a reliable and efficient solution for portioning a wide range of food products with precision and speed.

Condition: used, Panel turning device used for loading and unloading panels. Cgsbvjrzhfaer Idwst Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transservsal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 01.04.10, Kaj Olesen A/S pin bone remover Type: VBM.52, plastic belt, belt width: 280 mm, Cebvr Idoulwhmowegt Total dimensions: 1000 mm x 500 mm x 1650 mm

Condition: new, Year of construction: 2025, center height: 315,425 mm, grinding wheel diameter: 750 mm, grinding diameter: 630,850 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, Main technical data : Swing diameter mm 630-850 Cobvr Idjpy A Iqswjgt Distance between centres mm 3000,4000,500 Standard wheel size (diameter x width x bore) mm750/570 x 100 x 305 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°)+10/- 30 Workhead swivel (°)90 Tabel swivel (°)+6/-4 Workhead spindle speed, infinitely variable RPM 8 – 156 Workhead sleeve taper bore Morse 6 Tailstock sleeve taper bore Morse 6 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 7,5 Wheelhead motor kW 22 Total power demand of machine kW 45 - between centres kg2 500 Weight of machine with standard accessories kg approx 17 500 Dimensions of machine approx. mm 12 000 x 2 980 x 2 200

Condition: used, Technical data: Cgjbeh Dzxzevr Idwet Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Revolutions: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Working table dimensions: 300x1100 mm Adjustable culagi arms Engine power: 5.5 kW Power supply: 380 V Producer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Cebsnn Rkwsvr Idwsgt *

Condition: excellent (used), Year of construction: 2015, saw blade diameter: 500 mm, 500 mm saw blade TWO MACHINES ON STOCK! Csbvsu A Ugcjr Idwsgt

Condition: good (used), Year of construction: 2002, operating hours: 5,600 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain TNC 426/30, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 18, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,200 x 500 mm Cgsbvr Idjwcm U Tswst Control system: Heidenhain TNC 426/30 Spindle Spindle speed: max. 6,000 rpm Spindle motor power: 7.5 kW Tools Tool holder: SK 40 Tool positions: 18 MACHINE DETAILS Machine weight: 5,100 kg Spindle running time: 5,600 h EQUIPMENT - Chip conveyor

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Max. drilling/tapping: Ø 8 mm / M6 Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Cebvewcn Eyer Idwsgt Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Y-axis travel: 2020 mm Z-axis travel: 600 mm Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Cgobvrswbvgis Idwet Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Operating parameters Max. waterjet operating pressure: 4,000 bar MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, Functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling Csbvr Idewc Ryaswjgt - Continuously rotating rotary table - No chip conveyor

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Cobvjwcrrdjr Idwsgt Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT Cobvr Idewcrnxswegt - CNC control IBH - Loading device - Various accessories

Condition: good (used), Year of construction: 2006, operating hours: 10,700 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,200 x 500 mm Spindle & Tools Spindle speed: max. 8,000 rpm Spindle motor power: 15 kW Tool holder: SK 40 Tool positions: 24 Cebswcm E Eevr Idwsgt Control Control system: Heidenhain iTNC 530 Handwheel: HR 410 MACHINE DETAILS Spindle running time: 10,700 h EQUIPMENT - Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Csbjwcnubevr Idwogt Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 12940, pressing force: 50 t, working length: 2,550 mm, stroke distance: 120 mm, TECHNICAL DETAILS Press force: 50 t / 500 kN Motor power: 5.5 kW Axes: Y1, Y2, Z Working area Bending length: 2,550 mm Stroke length: 120 mm Cylinders: 2 Speeds Lowering speed: 100 mm/s Pressing speed: max. 13.5 mm/s Retraction speed: 75 mm/s Hydraulics Oil tank: 100 l MACHINE DETAILS Length: 2,750 mm Width: 1,100 mm Height: 2,050 mm Weight: approx. 3,500 kg EQUIPMENT - Hydraulic tool clamping for the upper tool - Darley system Cgsbvr Idswcqttjwot

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Chip conveyor: available Cgsbvrjwcz U Io Idwet Cooling system: available Maintenance: regular

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation Cebvowff R Ssr Idwjgt - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW Cebswffkxjvr Idwsgt EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each Cgjbvr Idewc Sicewet - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36 Csbvswgaz Uor Idwogt

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Cjbvr Idowc Shfswsgt Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Cgebvswfxkxor Idwjt Number of controlled axes: 5 axes Total number of tool changer positions: 36