Used Atlas-Copco Qas 100 for sale (41,042)

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 A.C. Servo Controller , serial no. according to photo ,used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Csb Hgxuei Ebhtjasrb

Condition: new, -Size: 1370x190x2000mm -Capacity: 100 packs -Weight: 109kg -Misting sensors are designed to be connected to the seam of your stove and not to the outlet of the cooker hood. -Connect the hood and then to a drain. -The drain must be connected at the bottom. Dqjtyx -Steam radiators do not work with the extractor hood outlet. -There is no fan connection Crjb Hsu S Nu Degxuasb

Condition: used, EMMS-AS-100-S RS + EMGA-80-P-G5-SAS-100, Festo servo motor 550122 + 552195 - As good as new Csb Hgeq S Srgoxuajrb Model: EMMS-AS-100-S RS + EMGA-80-P-G5-SAS-100 Condition: Used

Condition: used, mileage: 129,300 km, power: 221 kW (300.48 HP), first registration: 02/2014, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 12,280 kg, empty load weight: 13,720 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,050 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Mercedes- Benz Arocs 2630 6X2 flatbed with building materials crane DATED: 02/ 2014 only 129.300 KM with receipts !!! Euro6 emission class short cab MercedesPowerShift automatic transmission air conditioning Trailer coupling with hydraulic connection for tipper 6X2 axle formula Rear axle air suspension 3rd axle steerable and liftable Tires 315/80 R22.5 Profile approx. 60% Wheelbase 4200mm Platform 6050mm Crsb Hgxjvik Apjuaeb 1000mm Drop sides Unladen weight 13.720KG Crane Atlas 165.2 Year of construction 2013 Operating hours 2838 Top seat control (top seat control) incl. rotator incl. tongs 2 point supports 2 hydraulic extensions 5.50m/ 3000Kg 8.10m/ 1950Kg 10.80m/ 1450Kg German vehicle from 1st hand in a well-kept condition. export/ net price: 47.900 Euro All information without guarantee, errors excepted.

Condition: used, mileage: 158,289 km, power: 213 kW (289.60 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2016, next inspection (TÜV): 07/2025, emission class: euro6, Year of construction: 2016, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MAN 18.290 TGM Meiller three-way tipper with Atla crane 65.2-A1 * Automatic air conditioning * Meiller three-way tipper 4000mm x 2350mm x 400mm * 1x comfort seat * Heated seats * Electric mirror adjustment * Heated mirrors * Sun visor * Cruise control * ABS (Anti-lock braking system) Cob Hgjv Rh Iljxuaerb * Traction control (ASR) * Power take-off * Differential lock * Fog lights * Work lights * Storage box * Leaf spring suspension * Roof hatch * Emergency stop * 2-point hydraulic outriggers Tires 80% First owner!!! Very good condition Call us! Give us a call! ????? ??? ?? ?????! Hungarian language! Zadzwo? Do us! Call us! ???? ??? ?? ???? ????? Would you like to visit us? We offer a free pick-up service from the train station in 98544 Zella-Mehlis. We handle all customs and registration matters for an additional fee. We transport vehicles to the port for an additional fee. Where should I leave my used car? Please bring your used car; we are happy to accept it as part payment. We will give you the price immediately. Subject to typographical errors, mistakes, changes, and prior sale. If a foreign currency is specified, this will be charged at the current daily rate. The currency of the vehicle's location is valid.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Options: Chip conveyor 72-tool Capto C6 magazine Bar feeder interface Parts catcher Hainbuch chuck Crjb Hgjwcl Skexuasb 15 bar center-spindle coolant Renishaw RMP 600 5 continuous axes Flash tool

Condition: good (used), Drying oven, drying cabinet, chamber dryer oven, warming oven, heating chamber, drying oven, drying cabinet, drying and warming cabinet, universal oven -Manufacturer: Heraeus, drying cabinet universal oven type T 6120 with viewing window -Useful space: BTH 550/370/495 mm / 100 liters -Heating power: 2.2 kW -Nominal temperature: 300°C Crsbewbc U Hj Hgxuasb -Voltage: 230 V -Individual components: digital temperature controller, adjustable ventilation flap -Dimensions: 940/585/H720 mm -Weight: 72 kg

Condition: like new (used), Year of construction: 2008, operating hours: 23,412 h, Functionality: fully functional, KMT SV 100 HP S high pressure pump Sold in overhauled condition. Cjb Henab Eregxuaorb new pressure intensifier, new control and new HP pump Oil/air cooling available ( Pictures are condition )

Condition: as good as new (ex-display), DIX FDE-PN 100 L, DINSE, control Cjb Hgjutcdvexuajrb Model: DIX FDE-PN 100 L Condition: As good as new

Condition: used, mileage: 129,300 km, power: 221 kW (300.48 HP), overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 12,280 kg, empty load weight: 13,720 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,050 mm, first registration: 02/2014, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Mercedes- Benz Arocs 2630 6X2 flatbed with building materials crane DATED: 02/ 2014 only 129.300 KM with receipts !!! Euro6 emission class short cab MercedesPowerShift automatic transmission air conditioning Trailer coupling with hydraulic connection for tipper 6X2 axle formula Rear axle air suspension 3rd axle steerable and liftable Tires 315/80 R22.5 Profile approx. 60% Wheelbase 4200mm Platform 6050mm 1000mm Drop sides Unladen weight 13.720KG Crane Atlas 165.2 Year of construction 2013 Operating hours 2838 Top seat control (top seat control) incl. rotator incl. tongs 2 point supports 2 hydraulic extensions 5.50m/ 3000Kg Cjbjvik Aij Hgxuajrb 8.10m/ 1950Kg 10.80m/ 1450Kg German vehicle from 1st hand in a well-kept condition. export/ net price: 47.900 Euro All information without guarantee, errors excepted.

Condition: used, mileage: 158,289 km, power: 213 kW (289.60 HP), first registration: 06/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 07/2025, gearing type: mechanical, emission class: euro6, loading space width: 2,350 mm, loading space length: 4,000 mm, loading space height: 400 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), MAN 18.290 TGM Meiller three-way tipper with Atla crane 65.2-A1 * Automatic air conditioning * Meiller three-way tipper 4000mm x 2350mm x 400mm * 1x comfort seat * Heated seats * Electric mirror adjustment * Heated mirrors * Sun visor * Cruise control * ABS (Anti-lock braking system) * Traction control (ASR) * Power take-off * Differential lock * Fog lights * Work lights * Storage box * Leaf spring suspension * Roof hatch * Emergency stop * 2-point hydraulic outriggers Tires 80% First owner!!! Very good condition Call us! Give us a call! ????? ??? ?? ?????! Hungarian language! Zadzwo? Do us! Call us! ???? ??? ?? ???? ????? Would you like to visit us? We offer a free pick-up service from the train station in 98544 Zella-Mehlis. We handle all customs and registration matters for an additional fee. We transport vehicles to the port for an additional fee. Where should I leave my used car? Please bring your used car; we are happy to accept it as part payment. We will give you the price immediately. Subject to typographical errors, mistakes, changes, and prior sale. Cjbov Rh Ifj Hgxuaorb If a foreign currency is specified, this will be charged at the current daily rate. The currency of the vehicle's location is valid.

Condition: new, Year of construction: 2025, Functionality: fully functional, warranty duration: 12 months, DGUV certified until: 05/2027, Planetary mixer Model: V-Mixer 100 L Professional machine with robust technology! Creb Hgxsfhdkxjuajb for best results! LED display 10 power levels and timer Tamper protection / safety grille with protective circuit Mixer with tools: 1 whisk, 1 dough hook, 1 flat mixer 1 100 liter stainless steel kettle Boiler stroke electrical DGUV V3 checked Connection 400V, 4 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1804 mm, WxDxH New machine with 24 months warranty Option: - Programming of 20 recipes with 7 steps each - time programming - tank wagons - Air pressure connection for more volumes

Condition: good (used), Vibration warning signal Csb Hgxuob A S Eheaerb -Type: PA 100 -Quantity: 6 pieces -Price: per piece -Weight: 0.2 kg/piece

Condition: used, Year of construction: 1965, Used machine Year of construction: 1965 Condition: Age-appropriate Creb Hgxujuza Ucoajb Equipment and technical data: Press area size 2550 x 1350 mm Total pressing pressure 100 tons 4 pressure cylinders 100 mm diameter Opening width 400 mm Weight approx. 4700 kg Machine has no safety ripcord; can be retrofitted on request Location: Flörsheim Availability: Short term

Condition: used, DIX FDE-PN 100 L, DINSE, control Crob Hgxuevrgr Eeajb Model: DIX FDE-PN 100 L Condition: Used

Condition: used, Year of construction: 1982, pressure 100 t Creb Hgxeq Dta Ssuaeb chamfer lenght . mm distance between columns . mm total power requirement . kW weight of the machine ca. 8 t dimensions of the machine ca. . m

Condition: refurbished (used), saw blade diameter: 360 mm, cutting range round at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !! Crjb Hgsh Uqpvexuajb

Year of construction: 2023, Condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service. Creb Hgjgay Rlsxuaeb

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg Csb Hgxujwa Izpsaorb

Condition: used, Used machine Equipment and technical data: Lock case milling unit Handle hole drill Mortise milling cutter Incl. accessories Cob Hgxjv E S Apeuaerb Motor 1.7 kW 2800 rpm Location: Flörsheim Availability: short term

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Federhenn's fully automated rod machining center performs all the machining required for windows and front doors in a process-optimized manner. Capacity: approximately 100 rods per 8 hours. Creb Hewgd Acjgxuajb

Year of construction: 1997, Condition: used, 1 SCHECHTEL UX 100/S segmental folding machine mobile, with triple coil carriage and unwinder, 100 cm Cjb Hgxuswccnijasrb Color: green Year of manufacture: 1997 Condition: used

Condition: good (used), Manufacturer: Comau Type: Smart H3 XL and Smart NH1-100-3.2P Years of manufacture: 2001-2011 Cjb Hjwa N R Ssgxuaorb Total quantity: 18 units including 6 SMART H3 XL and 12 Smart NH1-100-3.2P The robots were installed in a press line and have since been dismantled. The controllers are included, but some parts have been removed. Most of the teach pendants are present. Detailed information is available upon request. A viewing near Cologne is possible by appointment.

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, both for solid wood, panel materials or other materials. Advantages: - Very small space requirement - Maximum time savings thanks to extremely fast production times - Fast amortization thanks to low purchase price - Quick learning of the technology thanks to extremely simple operation - Cleanliness of the workpieces with low suction power thanks to machining from below - Extremely fast, simple and variable programming with the MASTERWORK software (standard) - Extremely fast and simple programming of complete cabinets through the use of Palette CAD (option) Technical data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000mm for all units Min. workpiece width: 85mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60mm Min. workpiece thickness: 10mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and also on the ratio of length to width! Units: 16mm drilling head: Vertical spindles in X direction: 5 pieces Vertical spindles in Y direction: 5 pieces Horizontal double drilling spindle in X direction: 2+2 pieces Horizontal double drilling spindle in Y direction: 1+1 pieces Distance between drilling spindles: 32mm Speed of drilling spindles: 4,000 rpm. Motor: 1.7 kW Groove saw: in X direction Speed: 4,000 rpm Max. saw blade diameter: 125mm Motor: 1.7 kW (The groove saw is integrated in the drill head) Control: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB storage space Color screen Integrated video card 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150mm Other features: - Air tables in the work area - Roller table in the inlet and outlet - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (Operating instructions, circuit and pneumatic diagram are included in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm. Motor: 4.5 kW with ISO 30 mount Incl. integrated suction control (when drilling only the drill head is suctioned, when milling only the milling unit is suctioned) 6-way tool changer Tool equipment, consisting of: 3 pieces 5mm – GL 70mm - blind hole drill (right) 2 pieces 5mm – GL 70mm - blind hole drill (left) 1 piece 5mm – GL 70mm - through drill (left) 2 pieces 8mm – GL 57.5mm - blind hole drill (right) 2 pieces 8mm – GL 57.5mm - blind hole drill (left Ceb Hgxuov E Szxjajrb 1 piece 10mm – GL 57.5mm – blind hole drill (right 1 piece 10mm – GL 57.5mm – blind hole drill (left 1 piece 10mm – GL 70mm – blind hole drill (left) 1 piece 8mm – GL 70mm - blind hole drill (right) 1 piece

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Functionally tested Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio! Units: Milling unit with 4.5 kW motor (frequency-controlled) including MASTERWORK software extension Speed: 1,000 to 18,000 rpm including integrated extraction control (only the drill head is vacuumed during drilling, only the milling unit during milling) 4-station tool changer for ISO 30 taper 16 mm drill head: Vertical spindles in X direction: 5 Vertical spindles in Y direction: 5 Horizontal double drilling spindle in X direction: 2 + 2 Horizontal double drilling spindle in Y direction: 1 + 1 Drill spindle spacing: 32 mm Drill spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (The grooving saw is integrated into the drill head) Program: MASTERWORK MACHINE VERSION Additional data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150 mm Other features: - Air tables in the work area - Roller table in the infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Central lubrication - Import of DXF files Machine dimensions: 2100 x 2410 x 1510 mm Weight: approx. 1300 kg Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2000 m³/h Air velocity: 25 - 30 m/s Extraction nozzle: 1 x 150 mm Availability: Short term Cjb Hswb Eg Ejgxuaerb Location: Hochheim