Used Atlas-Copco Qas 100 for sale (41,042)

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l Crsb Ejvuunmsbhk Usb total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: ready for operation (used), Motor power: 5.5 kW Briquette diameter: 80 mm Sawdust level sensor Operating hours: 6363 h Hopper diameter: 1200 mm Adjustable feed rate Year of manufacture: 1996 Crsbswd R Aqe Ebhk Ueb Power supply: 380 V

Condition: good (used), Probat HDF 100 rotary valve overall dimensions: 140 cm long, 45 cm wide, 55 cm high. Inlet opening: 46 cm x 9.5 cm. Weight: 270 kg. Cob Eowgl A Debhk Uorb

Condition: used, Year of construction: 2007, operating hours: 16,000 h, Equipment: all wheel drive, ATLAS-TEREX TW130 mobile excavator (self-propelled work machine) ALL-WHEEL Year of manufacture: 2007 Type: TW130 Vehicle identification number: 145M301957 Maximum speed: 20 km/h Power: 67 kW Total weight: 16 t Own weight: 14220 kg Length: 6500 mm Width: 2500 mm Height: 4000 mm Driven axles: 2/2 We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved. Crjb Ebovmuqlehk Uob

Condition: used, Year of construction: 1985, Functionality: fully functional, drop-through hole in table: 1,500,700 mm, table length: 1,400 mm, table width: 500 mm, pressing force: 100 t, stroke adjustment: 20,100 mm, overall weight: 22,000 kg, DGUV certified until: 05/2026, Raster HR 100-1400 automatic punching machine with Kohler roller feed Tie-rod construction Csb Eowg Ag Hsbhk Uorb High-quality solid cast iron construction Hydraulic overload protection Stroke height 20-100 mm Ram adjustment 60 mm Speed 15-80 rpm S7 control system, built in 2003 Available with Kohler belt conveyor, straightener, and washing machine upon request

Condition: new, overall weight: 36,000 kg, maximum load weight: 27,933 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,735 mm, loading space volume: 92 m³, Year of construction: 2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 100 moving floor +/- 92 cbm, Cargo Floor with 21 10 mm planks, stainless steel wear plate at the rear under the moving floor, complete emptying (moving bulkhead), push-in/push-out function, KNAPEN V1 radio remote control (for floor, lift axle, work lights), loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, 2 storage boxes, work lights, ABS, EBS, BPW Eco Air HD axle(s), disc brake system, lift axle, landing gear(s), air suspension with lifting/lowering device, vehicle can be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this property. Crsb Eowb N Uyebhk Ujb Please contact us!

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm Crebsvuumco Ebhk Uob table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking press can be inspected in running condition in our warehouse

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Infeed: 1,000 x 650 mm Final product: approx. 0/70-0/200 mm Ceb Ebstpaktehk Uorb Feed hopper, vibration feeder, electric drive with generator, side and main discharge belt

Condition: used, mileage: 240,662 km, power: 235 kW (319.51 HP), gearing type: automatic, fuel type: diesel, color: orange, overall weight: 20,500 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 05/2027, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, crane, Internal vehicle number: G300145 German vehicle In our yard in Kaufungen - Kassel, available immediately More information at * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G300145 * Purchase price: ¤62,900.00 * Down payment: 10% * Term: 60 days * Monthly installment: ¤985.16 Residual value: ¤12,580.00 Crsb Ebhkjwguafe Usb If you like this offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. ...

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Cob Eovvi Scsbhk Uorb

Condition: excellent (used), Year of construction: 2014, operating hours: 14,500 h, Functionality: fully functional, 1,0 St. gebr. Vertikal Spritzgießmaschine Hersteller: ARBURG Typ: 375V500-100 Drehtisch Baujahr: 2014 Ceb Ebswca T Nehk Ujrb Schließkraft: 50 Tonnen Schnecken DN: 25 mm Max. Hubvolumen: 59 cm³ Steuerung: SELGOCIA Ausstattung: Drehtisch zweiteilig Durchmesser 1.000 mm

Condition: used, mileage: 347,918 km, power: 162 kW (220.26 HP), first registration: 03/2011, overall weight: 11,990 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space width: 2,400 mm, loading space length: 3,800 mm, loading space height: 500 mm, total width: 2,530 mm, total height: 3,350 mm, Equipment: ABS, crane, electronic stability program (ESP), soot filter, MAN 12.220 TGS + Atlas 85.2 4x2 crane Suspension: Leaf-air Wheelbase: 3.60 m ATLAS crane Type: 85.2 - A2 Year of manufacture: 2011 2x hydraulic extensions + 1x mechanical extension Crsbjwf S Dlo Ebhk Usb 2x hydraulic support points 5th and 6th operation Tipper Length: 3.80 m Width: 2.40 m Height: 0.50 m Equipment: - Engine brake - Digital speedometer - 3x seats - Heated seats - Radio-CD player - Electric window lift - Sunroof - Sun visor - Trailer hitch: 2x air-ABS-electric-hydraulic connection) + ball joint We are also happy to support you with financing/leasing through our partners. All information is provided without guarantee. Errors and intermediate trade excepted.

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm Creb Ebsvuui Dohk Ueb speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2018, Used machine Cob Ebhonbiplok Uerb

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, overall weight: 7,490 kg, fuel type: diesel, color: orange, next inspection (TÜV): 05/2027, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle number: G300103 German vehicle In our yard in Kaufungen - Kassel, available immediately More information from Luis Lucena VIDEO: Cob Ebov Rt T Hshk Uerb Sewer cleaner with 2,875 operating hours Rockstroh Dran Jet 100 Year of manufacture 2010 Pump capacity 91 l/min - 150 bar 115 l/min - 120 bar 128 l/min - 160 bar* 120 l/min - 180 bar* 106 l/min - 200 bar* 92 l/min - 210 bar* *only for vans High-pressure system High-pressure unit positioned on one side Safety, overflow, and pressure control valves 1.5" water filter Pump drive Vehicle PTO (Box) Hydraulic (Box or Box Body) Hose Reels 1 x 80/100/120m DN10/131 x 80m DN16/191 x 40m 3/4" Water Filling Reel Errors excepted We are happy to accept your used vehicle as part payment. Financing is available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, Ferwood Code: RU0000640 - Manufacturer Code: 2-056-17-0930 - Condition: Used - Compatible Machine: HOMAG - Weight: 1KG - Dimensions: 20X20X20 - If interested we offer a revision service, contact us. Crob Eevaytfobhk Usb

Condition: used, Year of construction: 1990, pressure 100 t throat 300 mm stroke 20 - 120 mm no. of strokes 55 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 800 x 560 mm hole in the table 310 x 180 mm table height over floor 745 mm ram surface 520 x 245 mm ram adjustment 75 mm power requirement 5,5 kW weight 5,5 t dimensions (WxDxH) 1,1 x 2,4 x 2,4 m permitted for manual put-in according to the German Safety Regulations (UVV) Csb Ejvuug Aebhk Uerb with motor, back gears, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse

Condition: used, mileage: 240,662 km, power: 235 kW (319.51 HP), first registration: 10/2013, overall weight: 20,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 05/2027, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, crane, Internal vehicle number: G300145 German vehicle In our yard in Kaufungen - Kassel, available immediately More information at * Luis Lucena (German, English, Spanish, French) Cjb Ebjwgt Unshk Uerb * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G300145 * Purchase price: ¤62,900.00 * Down payment: 10% * Term: 60 days * Monthly installment: ¤985.16 Residual value: ¤12,580.00 If you like this offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. ...

Condition: used, Functionality: unexamined, Ferwood Code: RU0005377 - Manufacturer Code: TDM 1.2-100-300-W1-000 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Ceb Ebsv Efkmshk Usrb

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm Ceb Eovut Ufsbhk Ujrb die cushion area in table 600 x 600 mm side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: used, mileage: 240,662 km, power: 235 kW (319.51 HP), overall weight: 20,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro5, Year of construction: 2013, first registration: 10/2013, next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, crane, Internal vehicle number: G300145 German vehicle Csb Eewgt Ubobhk Uerb In our yard in Kaufungen - Kassel, available immediately More information at * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Financing example: * Internal number: G300145 * Purchase price: ¤62,900.00 * Down payment: 10% * Term: 60 days * Monthly installment: ¤985.16 Residual value: ¤12,580.00 If you like this offer or would like to customize it to your needs, please contact us at Mr. Enchev. We look forward to your call. ...

Condition: used, Year of construction: 1978, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m year of manufacture 1957 - modernized 1978 permitted for manual put-in according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram, pneumatic counterbalance in ram, two-hand and foot operation Ceb Ejvzxnwebhk Usrb

Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm speed down 380 mm/s speed up 185 mm/s working speed 28 mm/s oil volume 450 l power requirement 15,0 kW weight 9,5 t dimensions (WxDxH) 2,3 x 1,9 x 3,6 m hydraulic fast-stroke trimming press for cast parts with oilhydraulic drive, light guard (Sick), hydraulic blank holder / ejector in ram (7,5 t / 150 mm), control device for hydraulic blank holder, pneumatic ram interlocking table surface 1340 x 685 mm or 910 x 1085 mm ram surface 1235 x 685 mm or 910 x 1000 mm Crob Esvuk E Isbhk Ujb as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Crob Eevuk Ezebhk Ujb

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick Csb Ebhevuufxjk Uerb permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available