Used Ajce Ab-810M for sale (87,496)

Condition: used, Year of construction: 2015, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2014 - Cooling system Knoll Type FKA 1200 Year 2015 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Djbu Usvxa Tiogp Ijcg

Condition: used, Year of construction: 2017, operating hours: 49,902 h, machine/vehicle number: 2080451, Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 work spindles 1-17,500 rpm, torque motor drive system, equipment includes: Oil distributor for rotary table, pneumatic pressure booster, total magazine extension 144 tool positions (2 x 72), basic hydraulic clamping module, 70 bar high-pressure pump, emulsion mist separation system, automatic loading door, air monitoring, inductive tool breakage monitoring, KNOLL 800 K-1/400 scraper belt conveyor, KNOLL FKA 1200 compact belt filter for cleaning cooling lubricant and much more. Dcsbu Usv Tv Ekjgp Iog

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. Debu Ugoupzmuep Ijcg A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: used, color: other, first registration: 06/2008, Year of construction: 2008, Equipment: crane, Structure Material: Staal Crane Remote control: × Rotator: ✓ Hiab 166 ES3, 3x Hydraulically extendable, Dcebuswb Hczo Ugp Ijg 2x Extra function, Rotator = More information = Cab: half sleeper Crane: HIAB 166 ES-3 Extendable superstructure: Yes Tipper: Left / Back = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, SW BAS 03 - 12, Year of construction 2008 Siemens 840 D control system, Travel X/Y/Z 600/400/400 mm, spindle speed up to 17,500 rpm, HSK 63 holder, tool changer 40 times, NC swivel table 450 x 830 mm, Dcobjulk Ugou Ugp Iog max. table load 400 kg, Minimum quantity lubrication, water cooler, IKZ 40 bar, scraper belt conveyor,

Condition: excellent (used), Functionality: fully functional, Year of construction: 2018, STABAU Equipment Type: S11 - ZV 70 / TG-S-01 Size: FEM 4A Load capacity: 7000 kg Weight: 1120 kg Width: 2030 mm Year of manufacture: 2018 Fork adjustment Side shift Reach forks retracted: 1.35 m Reach forks extended: approx. 2 m With hose reel and hydraulic hose With cable reel (including cable) and hydraulic valve for Dcjbewc U A Sju Ugp Iog additional operation of the reach forks Was dismantled by a Still RX60-70 forklift with 300 operating hours.

Condition: used, Year of construction: 2009, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Djbu Ugpevw Dzhs Iecg Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. Number of working hours ca. 91.457 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Knoll 600 K-1 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Gear motor, electric motor, electric gear motor -Speed: 57 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 22 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 455/155/H195 mm -Weight: 18.8 kg Dsbodfgl Eju Ugp Ijcg

Condition: new, Year of construction: 2025, Functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). Debu Ugpjwc Nrne Iocg To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: new, Stour Twin Column Welding Cell Year: 2021 Technical data: Maximum column length: 3450 mm Minimum column length: 2500 mm with 360° rotation Dsbu Usv Uanljgp Ijcg Multiple columns from 100 mm to 600 mm Components: 2 x 2020 ABB IRB 4600 robotic arm MIG welders with cleaning heads Casing: Dimensions: 6.6 m x 6.5 m Fully protected enclosure with fast safety roller doors Control and drive panel Safety top enclosure

Condition: excellent (used), Year of construction: 2017, Equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table 1000 mm on right side from saw blade working table 1000 mm on left side of saw blade incl. 1 pcs saw blade DM 600 mm incl. side stopper on fence right side of the saw blade options: incl. additional work table 1000 mm right side of saw blade incl. additional work table 1000 mm left side of saw blade technical data: motor 9,0 kW Dcobu Ugjc Slxijp Iog saw blade DM 600 mm speed saw spindle 3000 RPM cutting capacity W 610 mm x H 30 mm W 380 mm x H 160 mm working hight over ground floor 850 mm working pressure 8 bar suction hoods 3 x 100 mm weight 450 kg compressed air consumption 8 NL/ cycle Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 1950, Grinding length X: approx. 600 mm Grinding width Z: approx. 200 mm grinding height Y: approx. 200 mm clamping surface: 500 x 200 mm weight: 1000 kg dimensions: approx. 1900 x 1300 x 1900 mm Painting: grey Debu Ugpjgu N Tyj Iocg Digital display: Without Accessories: magnet, suction device

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor - Cooling system, Knoll Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Debsvw D Axeu Ugp Ijcg prior sale!

Condition: excellent (used), Year of construction: 2014, Straightening press, without automation/handling Various spare parts for the machine Control system: Siemens Simatic S7 Dcebu Uoumhvwegp Iog Straightening force 150 kN Stroke max. 170 mm Workpiece dimensions min. - max. 15 - 45 mm Workpiece lengths min. - max. 600 - 2100 mm Weight 4500 kg Drives Siemens

Condition: used, Year of construction: 2019, Overview  This can filling line was manufactured by ABE in 2019 and is designed for filling 0.33L and 0.44L cans. The line is still in operation and can be inspected at any time by appointment. Technical details  Filling principle: Atmospheric Output: 1,500 cans/hour Processed formats: 0.33L & 0.44L Includes: Lid seamer Rinsing unit Drying unit Maintenance: Up to date Software: Updated Condition: In operation, can be tested Documentation: PDF & physical copies available Dcobu Uov Rnwgegp Isg

Year of construction: 2016, Condition: as good as new (ex-display), machine/vehicle number: F901/37, Technical specifications: Djbusm Tg Dus Ugp Iscg 1 ABUS LS pillar jib crane NL 250KG Payload at full radius 250KG / 0.25to payload Height: approx. 3.9m, UK boom: approx. 3.4m Outreach: approx. 2m, hook height: approx. 3.05m Weight complete approx. 450 kg with 250Kg Abus chain hoist with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Inspection book is available Very good condition, see pictures Location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold Shipping by forwarding agent or collection by appointment

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Dcobu Uoulzchsgp Ijg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 D Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor - Cooling system, Knoll, KTS 25-60-T Accessories, tools and clamping devices shown are only included in the scope of delivery Djbusvw D A Es Ugp Ijcg if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2019, Overview  This can filling line was manufactured by ABE in 2019 and is designed for filling 0.33L and 0.44L cans. The line is still in operation and can be inspected at any time by appointment. Technical details  Filling principle: Atmospheric Output: 1,500 cans/hour Processed formats: 0.33L & 0.44L Includes: Lid seamer Rinsing unit Drying unit Maintenance: Up to date Software: Updated Condition: In operation, can be tested Documentation: PDF & physical copies available Debu Usv Rnwaogp Ijcg

Condition: used, Year of construction: 2009, x-travel 600 mm Dsbu Usvw Dz Isgp Iscg y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. Number of working hours ca. 92.818 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Knoll 600 K-1 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 650 mm y-travel 650 mm Dcobu Uovw D Alegp Isg z-travel 550 mm Control Sinumerik 840 D sl Number of boring spindles 2 St. spindle tunring speed 10.000 U/min spindle distance 700 mm number of tool places 2 x 35 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor, Knoll Type 1000 K-1/700 Year 2022 - Cooling system Knoll Type FKA 1200 Year 2022 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2011 - Cooling system Knoll Debuevxa Sxs Ugp Iecg Type FKA 1200 Year 2015 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-12011 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope Dcebov Hhu Rju Ugp Isg of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 D Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Knoll - Cooling system Debu Ugpov Hhuwj Ijcg Knoll Type PF 160/620 TURBO-1 Year 2007 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2014 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well Dobu Ugpev Hhvbj Iecg as prior sale!