Used Ajce Ab-600M for sale (87,814)

Condition: excellent (used), Comes from Recipharm UK, ready to be used. Fjlqowdgrhew S Nxjgb

Condition: good (used), Code: 0092 Brand: STROMAB Model: PS 45/F - CE Standard Pendulum saw for cutting wooden boards, packaging, sawmills, joinery, wood window frames and various - CE Standard Technical data: Manual feed Feljwb Hrpjqw S Nxjgb Blade diameter mm 450 F30 - Speed 2800 rpm Motor Hp 5,5 Cutting capacity mm 510 Cutting height mm 130 Infeed and outfeed roller table mm 3000 Suction port diameter mm 150 Wheels on the base Overall dimensions mm 3700 x 1500 x 1750 h Weight kg 380

Year of construction: 2007, Condition: good (used), LABOTEK DDM4-120 Dry Air Dryer Stock No.: 503563 Machine Type/ Equipment Type: Dry Air Dryer Manufacturer: LABOTEC Type: DDM4-120 Year of Manufacture: 2007 The DDM is a mobile dry air dryer designed for the continuous drying of free-flowing plastic materials in granular form. The DDM is supplied as a standard mobile unit and can be installed alongside the processing machine(s) that will be supplied with dried raw material. The DDM is supplied as a standard unit with automatic dry air material transport to one processing machine and can also be supplied with a transport system for two processing machines. The DDM is designed for the drying of hygroscopic and non-hygroscopic raw materials, including reclaimed material, in the temperature range between 60 and 140°C with a maximum deviation of +2/-2°C. DDM is also available in a HT/LT (high/low temperature) version, which dries in the temperature range of 50-180°C. Due to the highly precise temperature control and a dew point temperature of -30°C, a residual moisture content of less than 0.02% can be achieved. (HT/LT 0.002%) Fslqw S Njwakwgsxogb - Connected load: 9 kW - Tank volume: 120 liters - Heating capacity: 8 kW

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00343, arm reach: 2,750 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, payload: 205 kg, Refurbished ABB IRB 6640-205/2.75 manufactured in 2015.12. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Fsljv U Uqusqw S Nxegb Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-205/2.75 Model Number: IRB-6640 Year of Manufacture Robot: 2015.12 Warranty term (months): 12   Payload (kg): 205 Reach (mm): 2750 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1320   Controller: IRC5 Year of Manufacture Cabinet: 2015.12 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: excellent (used), Year of construction: 2010, load capacity: 45 kg, We at Binici MB GmbH also have other industrial robots in-house. All our robots are fully functional (with complete accessories). Fgjlqwjv Diwho S Nxeb We are at your disposal for good advice

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Fslqwswf Dwws S Nxjgb Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: good (used), Year of construction: 2009, Functionality: fully functional, DGUV certified until: 03/2026, Bread slicer Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Mobile machine cutting thickness adjustable from 4 to 20 mm Fgslqw Sevkn Hzs Nxob Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine + spare part service Option: Maintenance contract Spare blade Service package Many bread slicers in stock!

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. Fgslqjdy Huysw S Nxeb - The diameter of the tube is 70mm - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. - Silent electronic relay - Maximum temperature - 1200C - Temperature drop - 10 C / min - Programmable temperature curve

Condition: used, saw blade diameter 400 mm cutting diameter 130 mm stroke 135 mm mitter cutting - all-position 0-45 ° turning speed range 1420 / 2840 U/min capacity 45 degrees: square 110 mm capacity 45 degrees: flat 50 x 240 mm capacity 90 degrees: flat 95 x 240 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 120 mm voltage 400 V total power requirement 3,7 / 4,5 kW weight of the machine ca. 600 kg Folqsd Scrrjw S Nxegb dimensions of the machine ca. 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping

Year of construction: 2008, Condition: new, Type: XZF / QA90L4A Serial number: Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Diameter top: Weight: 210 kg Dimensions: mm Fjlqwsizz D Tj S Nxjgb Condition: unused

Condition: used, thickness of jaw 160 mm max. clamping width 240 mm ca. tension force ca. 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Feljv Dxyxoqw S Nxegb Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Mobile paint booths in a container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Felqw Sswf Dmxs Nxegb Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology.

Condition: used, Functionality: unexamined, Bread slicer Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Fgslqwovktmmo S Nxsb Knives made of high-quality Teflon special coating Mobile machine cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine We have a large selection of bread slicers in stock!

Condition: used, Year of construction: 2001, total width: 800 mm, total length: 3,300 mm, total height: 3,200 mm, outer dimension width: 800 mm, outer dimension length: 3,300 mm, Empty weight: 1.000 kg Trabo WSB33 Net locking dimensions: 2700*2700mm 6 hydraulic supports in two groups Mobile ladder with guide rail mounted on the bench Dimensions module 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height stop strip 130 mm - Press drive: drijving_pers. - Year: 2001 - Documentation available: Yes - CE mark available: Yes - Serial number: 33009012 - Transport dimensions: 3300mm x 800mm x 3200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fjlev Ulygeqw S Nxsgb Glenn Smeets

Condition: used, Year of construction: 1980, Technical details: grinding length: 600 mm grinding width: 300 mm total power requirement: 7,5 kW number of spindle speeds: 0-3000 grinding wheel motor: 7,5 kW grinding wheel diameter: 300 mm dimensions of grinding wheel: 76 x 20 mm ABA magnetic table flat grinding machine * Fgolqjwg H Hqjw S Nxeb

Condition: reconditioned (used), Year of construction: 2010, IRS Robotics® Refurbished industrial robot Comes with our warranty. Brand: ABB Type: IRB6640-2.55/235 Controller: IRC5 General purpose: Heavier Payload Floor Mounted Payload: 235 kg Reach: 2550mm Robot mass: approx. 1400 kg Optional: We can deliver the robot with ABB IRBT6004 track (up to 32 meters if needed). Complete with incl. 7th axis drive unit in robot controller, motor, cable chain, grease pump, fully functional and running. IRS Robotics® refurbished: 77-Point Protocol - fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily reliable business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Fgjlqep T Uz Ejw S Nxsb Est. 2002. We ship worldwide. Note: the displayed product pictures are our own robot pictures and for illustration purposes. We have a stock of the featured robot type and look very forward to assisting you.

Condition: used, type of input current: AC, protection type (IP code): IP22, power: 132 kW (179.47 HP), Equipment: type plate available, Exact type designation: ABB ACS607-0170-3 Output power and output current: 132kW | 260A Fslqorakqmjw S Nxogb ° With TEST SEAL! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Only 2 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m Fgelqjtddw Asw S Nxjb - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Weight: 2.500 kg Price: On request - Year: 2016 - Documentation available: Yes - CE mark available: Yes - Serial number: 6237 - Voltage [V]: 415 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Fgolev Ukqdjqw S Nxeb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Trabo WSB33 Net locking dimensions: 3680*2700mm. 6 hydraulic jacks in two groups Electric operation Fgeljv Ukpmeqw S Nxeb Module dimensions 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height of the stop strip 130 mm - Press drive: drijving_pers. - Documentation available: No - Serial number: 104790/0007 - Max. workpiece height: 2500mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2003, Crosscut saw Stromab TR 350 Year of construction 2003 Engine 3kW Saw blade 350mm Sawing capacity 210x30mm_200x50mm_150x80mm Rollerconveyor 3000mm & 2500mm Dimensions 7000x1000x1300mm, weight 250kg Fgolqw S Njv Ukmfexob - Year: 2003 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2006, Pendulum crosscut saw Stromab PS 45/F Serie nr. 260957 Year of construction 2006 Max saw blade 450mm Sawing capacity 130x510mm Axle hole 30mm Rpm 2800mm Required extraction capacity 1250m³/h. Input conveyor Uitput conveyor 4kW, 380V Dimensions: 1200x1550x1850mm (LxWxH), Weight 285kg - Main motor power [kW]: 5001.0 - Year: 2006 - Documentation available: No - Serial number: 260957 Folqev Ukl Uow S Nxogb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1981, total width: 2,000 mm, total length: 1,400 mm, total height: 1,410 mm, Weight: 1.500 kg - Year: 1981 - Documentation available: No - Serial number: 315 - Voltage [V]: 380 - Fuse [A]: 58,4 - Power [kW]: 30.0 - Transport dimensions: 1400mm x 2000mm x 1410mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fgjlqwov Uiy Do S Nxsb Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1979, Multiblade saw Gabbiani SA 350 Motor 30 HP, 45 Amp, 380V Saw blade max 350mm Width transport chain 300mm Fgolqwsv Uixae S Nxob Max height 120mm - Year: 1979 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Multi-blade saw Gabbiani SA 300 Chain transport width 300mm Min-max saw blade diameter: 200-300mm Main engine 30PK Cutting height 100mm Fslqw S Nov Uiw Aexjgb Transport dimensions: 1800x1700xH1500mm, weight 1500kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets