Used Ajce Ab-300M for sale (88,053)

Condition: used, Year of construction: 2019, Numerical Control with WINCUT software Printer for barcode labels Cutting length mm 4300 Cutting width mm 4300 Blade projection mm 110 Double lateral aligner with pneumatic rubber cylinder N° 1 Fixed front Bakelite table with air curtain system and lateral guide for loading \ unloading panels N° 3 Adjustable front Bakelite tables with air curtain system for loading \ unloading panels Engraving unit (max blade diameter / power) Main blade unit (max blade diameter / power) 20 hp (15 kw) Optimized blade / presser ascent in self-learning Electronic adjustment of the engraver Adjustable speed of the blade carriage m/min 150 - 170 Speed of the pusher carriage m\min 0-90 Pusher carriage with n° 7 clamps TECHNICAL DETAILS TO BE VERIFIED Dcslrcrgewcdyme Hog

Year of construction: 2017, Condition: used, Multilift Container System, 2017, 18 Tons = More information = Year of manufacture: Jan 2016 = Dealer information = Delrswa D Thecrg Hecg Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: like new (used), ABB motor 5.5 kw Dcsljqy Dccjrcrg Hjg

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, Functionality: fully functional, pressing force: 70 t, bale weight: 500 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material Djlrcrsu Thbxjg Hscg SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, diameter 400 - 550 mm Djlrcju U T Tcsrg Hscg bore 90 - 95 mm Various used face plates: Face plate 1 = 500 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 2 = 550 mm, short taper Din 55027 Gr. 8 = € 530.00 Face plate 3 Röhm = 400 mm, short taper Din 55027 Gr. 6 = € 470.00 Face plate 4 = 315 mm, short taper Din 55027 Gr. 6 = € 260.00 Jaws can only be adjusted individually via threaded spindles. Machine dealer with own stock of 1600 m².

Condition: new, Model: Complete ABB welding cell for wall assembly Year of production: 2021 Manufacturer: ABB Welding robots: Type: ABB IRB 4600-20/2.50 Quantity: 4 pieces Load capacity: 20 kg Working range: 2.50 m Positioning accuracy: ± 0.05 mm Motion and transport system: Track: IRBT Robot Travel Track Feed system: Column feeder Welding package: Model: Fronius TPS/I 400 Application: Robotic welding Gripper system: Type: Gripper for handling column components Function: Precise handling of structural elements Application: Automation of the welding process of wall structures Dslrcrgov Tbymj Hecg

Year of construction: 1994, Condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm Dcelrcrgeu Icv Ae Hjg wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm various accessories/tools for tube Ø 110 / 120 and 130mm optionally available per tool set 150 EUR / set *

Condition: good (used), Functionality: fully functional, Type: FA 600, Machine no: 1841254 Cutting lens: 6000mm, Cutting height: 150mm, Width: approx. 500mm Dcelrswb Svaecrg Heg

Condition: used, mileage: 23,700 km, power: 121 kW (164.51 HP), fuel type: gasoline, gearing type: mechanical, first registration: 12/2016, next inspection (TÜV): 06/2026, emission class: euro6, color: blue, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special Features: Two owners, top condition, private sale! Accident-free, serviced 1200 km ago with new timing belt and turbo hose, 8-wheel summer and winter tires on aluminum rims. Rear parking sensors, UConnect infotainment system with MP3 player, navigation system, and DAB radio reception (7-inch touchscreen), automatic interior mirror, 7x17 alloy wheels (5-spoke, Trofeo, anthracite), metallic paint, Beats Audio sound system, wind deflector Other features: Adaptive damper system on the rear axle (Frequency Selective Damping), driver/passenger airbag, antenna integrated in the side window, sport design instrument cluster, Turismo trim package, both exterior mirrors electrically adjustable and heated, passenger airbag deactivatable, on-board computer, black brake calipers, electronic parking sensors, electronic brake force distribution, electronic differential lock, driver assistance system: brake assist, electric folding roof, heated rear window, interior: dashboard inserts, matte gray, ISOFIX child seat mounts on the rear seat, body: 2-door, automatic climate control, driver's knee airbag, head airbag system front and rear, boost pressure indicator, steering wheel (sport/leather), steering column (steering wheel) height-adjustable, air filter: sports air filter, model update, engine 1.4 Ltr. - 121 kW 16V Turbo CAT, multifunction display with color display, position memory for front passenger seat, digital radio reception (DAB+), smoker's package, tire repair kit, split/folding rear seat, low emissions according to Euro 6 emissions standard, front side airbag, tinted rear side windows, side skirts in body color, height-adjustable front left seat, sports exhaust system, lowered sports suspension, sports pedals, leather sports seats, bumpers in body color, chrome-plated exterior door handles, tinted windows, heat-insulating glass Delrcjwb Nuterg Hecg

Condition: excellent (used), Year of construction: 2009, operating hours: 20,536 h, Functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale height: 750 mm, bale width: 1,100 mm, net weight: 16,000 kg, nominal current: 75 A, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Dolrcrgou Thype Hocg Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Due to a reorganisation of the manufacturing processes within the company, a new baling line is being built in a new hall. The old baling press with conveyor technology is therefore no longer required and is expected to be available for sale at the beginning of 2025. Technical data for the chain belt conveyor: Manufacturer not known Type not known Length of feed belt 5,300 mm Length of ascending belt 12,700 mm Overall height 7,300 mm Useful width 1,200 mm Unfortunately, no further technical data, documentation or drawings are available. Condition of the press system: The entire system is in very good condition and is regularly cleaned and maintained by the operator. The quality of the bales is exceptionally good, as you can see from the photos of the pressed bale goods. Even hard plastics such as plastic crates, PP bucket chains and PE plastic drums were pressed into dimensionally stable bales with the fourfold vertical binding. Tidiness, cleanliness and maintenance of the systems are practised in this company and not just written on the website. Scope of delivery: Avermann baler, type AVOS 1410-45/80, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available in full. Unfortunately, there is no more documentation for the conveyor belt. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Functionality: fully functional, The Julabo FL1701 Recirculating Chiller is designed for routine laboratory cooling applications. PID temperature control provides ±0.5°C stability. Proportional cooling control adjusts the cooling power to the load of the application and saves energy. Units incorporate RS232 interface and alarm output for PC integration and control. The Julabo FL1701 Recirculating Chiller includes a splash-proof membrane keypad with LED temperature display. Easy filling / draining with a fill level indicator and overflow port on the back. Units are constructed of stainless steel and high-grade plastic with stainless steel internal tank. Centrifugal pressure pump provides circulation to external application. Temperature range: -20°C to +40°C 23L/min flow rate Dslrcewc N Tlerg Hecg Good working condition. Please check out our other listings as well.

Condition: excellent (used), Double bevel saw, manufacturer Häberle AL 350. machine in very good condition. Dsljudpltjrcrg Hecg

Condition: used, Year of construction: 2012, operating hours: 24,590 h, We are offering the ABB robot IRB 7600-500/2.55 Also, we are offering to overhaul the robot. Dolroimbwiscrg Hjcg

Condition: used, Year of construction: 2001, back gauge: 500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 1,000 mm, Hydraulic Guillotine Shear Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Technical Specifications Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Usable Length: 1000 mm Sheet Thickness: 6 mm Dimensions: L 1.50 x W 1.70 x H 1.60 m Weight: 1.6 t Features • Manual backgauge 500 mm • Angle stop Dcelrcev I T N Njrg Hsg All information is subject to change. A demonstration is available at any time in our showroom.

Condition: used, Functionality: fully functional, Year of construction: 2011, load capacity: 22,000 kg, construction width: 6,000 mm, net weight: 3,165 kg, Accessories Load center: 750 Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: 2x forks: 250 x 80 x 2 400 mm Dcolrju Dz R Decrg Hog

Condition: good (used), Year of construction: 2019, Rear-loading panel saw with panel turntable Delrsv Aiaascrg Hscg

Condition: used, Year of construction: 2001, grinding length 1000 mm grinding width 600 mm Dcolrcovvcdxorg Hog

Condition: used, Functionality: unexamined, machine/vehicle number: GER-078, load capacity: 10,000 kg, Cable-operated workpiece manipulator with a 10,000 kg load capacity Max. workpiece width: 2,000 mm Total dimensions: 5,860 x 800 x 1,400 mm Weight: 3,090 kg Max. load capacity: 10,000 kg Max. workpiece width: 2,000 mm Dcslrcrewbflhsg Hjg

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Hydraulic presses for gluing of construction timber, blockboards Small space requirement and front loading Chassis on wheels, two of which are steerable are steerable Height-adjustable hydraulic cylinders with practical and functional Vertically adjustable uprights with frame pressing device Technical data: Dcslrcrskwhb Heg Hog Work surfaces: 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of the hydraulic cylinders with manual adjustment: 1500 kg Positioning dimensions approx. 3200 x 800 x 2200 mm Location: Hochheim Availability: short term

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Dcolrcjuifr Horg Hjg Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Year of construction: 2021, Condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Condition: new Equipment: 40 bar high-pressure pump + 2 additional pumps for chip flushing, double changeover filter for fine filtration Dcjlrcrjv Hcynsg Hsg

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Year: 2002 Weight: 9.500 Kg Rated force: 100Tn Type: Pneumatic clutch eccentric Stop position: 580mm Closing height: 450mm Maximum flywheel RPM: 500mm Travel: 13-130mm Dcslrcrgjuif Tko Hog Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Safety distance: 486 mm

Year of construction: 2022, Condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Condition: new Dcolrcrjv Hbv Ueg Hsg Equipment: 80 bar high-pressure pump + 2 additional pumps for chip flushing, frequency control for high-pressure pump to adjust the pressure, double switchover filter for fine filtration

Year of construction: 2004, Condition: good (used), ABUS GM4 500.8-1 electric hoist, second hand Capacity: 500kg Chain length: 32m Length of push-button panel: 22m Year: 2004 Speeds: 2 (2m/min. - 8m/min.) Dolrcrsudwdkeg Hjcg Motor: Three phase 380V Power: 0,9KW

Condition: good (used), ABUS GM4 500.8-1 electric hoist second hand Dolrcrjudwbieg Hjcg Capacity: 500 kg Chain length: 32m Length of pushbutton panel: 22m Year: 2004 Speeds: 1