Used Ajce Ab-200M for sale (88,222)

Condition: new, Year of construction: 2024, Equipment: compressed air brake, Scraper floor | Annaburger HTS 22H. 04 Professional Universal Spreader New machine, built in 2024 Technical specifications Gross weight: 23,000 kg Box dimensions: L 6.83 m x W 2.32 m x H 1.05 m (plus extension) PTO speed: 1000 rpm Oil volume of scraper floor: 80 liters/min Equipment: Tandem bogie chassis, suspended 1st axle as hydraulic lift axle 2nd axle as lockable self-steering axle Wabco ladder Air brake 2-disc spreader STE 12E-2.3C Bottom hitch with K80 ball head Hydraulic suspension drawbar 400 mm compost extensions Screw-on tines Hydraulic partition wall Hydraulic border spreading device, left Tires 710/50 R26.5 Alliance 885 Double-sided wide-angle PTO shaft Load sensing with amplifier Doliowdbmgsntm Necg Lime scraper bars ISOBUS standard equipment Additional application rate software package DEKRA approval 40 km/h | Internal No.: 11192557

Condition: repair required (used), Functionality: limited functionality, For sale Erjo SN 165 two drum chipper 30kw. Suitable for processing smaller size chips from waste wood. Set includes- chipper, vibrational infeed conveyor (needs little repair), infeed table, sawdust fan 22kw (suitable for transport of woodchips) and electrical cabinet. 5 positions. Dcjlintmovuk Uie Njg

Condition: excellent (used), Functionality: unexamined, overall weight: 2,500 kg, fuel type: diesel, color: green, maximum load weight: 3,000 kg, Year of construction: 1989, operating hours: 11 h, Equipment: hydraulics, Brand: Hiab Model: 965/90 Year of manufacture: 1989 Serial number: 95196 Operating hours (read): 11 Engine: Hatz Fuel: Diesel Voltage: 12 Dimensions (L x W x H) (mm): 3400 x 1000 x 2700 Weight (kg): approx. 2500 Number of units in stock: 1 Capacity (kg): 3000 kg x 3000 mm / 2000 kg x 4600 mm / 1400 kg x 8400 mm Made in the Netherlands Dolijv Rvvksntm Nscg Comments: Low hours self-propelled hydraulic crane

Condition: used, Year of construction: 2008, Functionality: fully functional, cooling capacity: 67 kW (91.09 HP), type of cooling: air, overall weight: 690 kg, Aircooled chiller National Lab 67 kW Cooling capacity: 67 kW / 19,1 tons (12/7 — 35°C) Year of manufacture: 2008 Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Sanyo (scroll) Number of fans: 3 pcs. Djlintmju T N R Io Nocg Dimensions: 2.30+0.25x1.33x1.60 m. Weight: 690 kg. Condition: good

Condition: excellent (used), Year of construction: 2008, load capacity: 1 kg, Cell ABB IRB 340 M2004 Type B Robot - 34-51225 Country of production: Sweden Production date: 2008 Control system: ABB M2004 Number of axes: 4 Load capacity: 1 kg Dcelintsqffhhom Neg Robot weight: 140 kg Range: Diameter - 1130 mm Height - 250 mm Rotation - no limit Cell dimensions: Length - 150 cm width - 145 cm Height - 240 cm The cell has two belt conveyors with a length of 65 cm and a width of 100 cm.

Condition: like new (used), Temperature range: 10 - 40 °C Power consumption: 2750 W / 9 A Delierypcaontm Nocg As good as new, never used

Condition: new, Year of construction: 2024, Annaburger HTS 24B.27 Slurry Tanker Year of manufacture 2024, demo machine used Technical specifications: Gross weight: 24,000 kg Tank volume: 21 m³ Equipment: 3-axle air-pendulum suspension Delintewdbmmom Necg Wabco 2-wire air brake GRP tank Filling nozzle on top, pneumatically operated Compressor system Side suction connection in front of trailer on the left Drawbar with K80 top hitch Wide-angle universal joint 10" external docking system 8" funnel for 10" docking system DEKRA approval 40 km/h Tires: 560/60 R22.5 Alliance 885 | Internal No.: 11190987

Condition: used, Year of construction: 2006, Functionality: fully functional, Bottling Labeller Sacmi Opera 200 Rf Roll-Fed Brand: Sacmi Model: Opera 200 rf Year: 2006 Speed: 20,000 – 24,000 bph Direction: Counterclockwise Number of stations: 1 Roll-Fed Delintmswd Ewpo Necg Safety protections

Condition: as good as new (ex-display), Year of construction: 2017, Measuring Range XY – axis Ø350mm Z – axis 200 mm Accuracy acc. ISO 10360 E = [2,9 + 4L/1000]µm Dolier Elmpsntm Nocg incl.: - Renishaw TP20 (new) - Renishaw MCR20 probe changer (+1 additional module) - Aberlink 3D software On Demand: Aberlink CAD offline programming/ CAD compare DEVA USB joystick Installation and training (1 day) fee € 3.500,-- excl. travel costs

Condition: used, Year of construction: 2010, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 D Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Knoll Type 600K-1 Year 2008 Dsljv Hhu Djintm Nocg - Cooling system Knoll Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. Dcslinjupzmustm Nsg A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: used, color: other, first registration: 06/2008, Year of construction: 2008, Equipment: crane, Structure Material: Staal Crane Remote control: × Rotator: ✓ Hiab 166 ES3, 3x Hydraulically extendable, 2x Extra function, Rotator = More information = Cab: half sleeper Crane: HIAB 166 ES-3 Extendable superstructure: Yes Tipper: Left / Back Dcolintowb Hczem Nsg = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 650 mm z-travel 550 mm Control Sinumerik 840 D sl Number of boring spindles 2 St. spindle tunring speed 10.000 U/min spindle distance 700 mm number of tool places 2 x 35 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Djlintmevw Dzzs Necg Technical features & accessories: - Chip conveyor, Knoll Type 1000 K-1/700 Year 2022 - Cooling system Knoll Type FKA 1200 Year 2022 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: new, Year of construction: 2025, Functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. Dsliewc Nrnentm Nscg The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: used, Year of construction: 2011, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table Dcoliovxa Srjntm Njg - Chip conveyor, Knoll Type 800 K-1 Year 2017 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2014 - Cooling system Deljvxa Tiointm Njcg Knoll Type FKA 1200 Year 2015 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2009, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. Number of working hours ca. 91.457 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Knoll 600 K-1 Accessories, tools and clamping devices shown are only included in the scope Dolintmsvw Dzhe Necg of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor - Cooling system, Knoll Accessories, tools and clamping devices shown are only included in the scope of delivery Dcelinjvw D Axotm Nsg if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 D Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected Delintsvw D A Eem Necg under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor - Cooling system, Knoll, KTS 25-60-T Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2015, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Dolintovxa Sxjm Nocg - Changeover table - Chip conveyor, Knoll Type 800 K-1 Year 2011 - Cooling system Knoll Type FKA 1200 Year 2015 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-12011 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Dcelov Hhu Rointm Njg

Condition: used, Year of construction: 2009, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm Dcjlovw Dz Ijintm Nsg number of tool places 2 x 40 Pos. Number of working hours ca. 92.818 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Knoll 600 K-1 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 650 mm y-travel 650 mm z-travel 550 mm Control Sinumerik 840 D sl Number of boring spindles 2 St. spindle tunring speed 10.000 U/min spindle distance 700 mm number of tool places 2 x 35 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor, Delintovw D Alem Njcg Knoll Type 1000 K-1/700 Year 2022 - Cooling system Knoll Type FKA 1200 Year 2022 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 D Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor, Dcolov Hhuweintm Nog Knoll - Cooling system Knoll Type PF 160/620 TURBO-1 Year 2007 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 500 mm z-travel 425 mm Control Siemens Number of boring spindles 4 St. spindle tunring speed 17.500 U/min tool taper HSK 63 number of tool places 2 x 36 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Changeover table - Chip conveyor, Knoll Type 800 K-1 Dcjlev Hhvbointm Neg Year 2014 - Cooling system Knoll Type FKA 1200 Year 2011 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!