Used Barford Sx 6000 for sale (3,900)

Condition: refurbished (used), Year of construction: 2019, operating hours: 340 h, Functionality: fully functional, cutting length (max.): 3,400 mm, cutting width (max.): 1,400 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, cutting height with scoring (max.): 155 mm, saw blade diameter: 450 mm, height adjustment type: electric, overall weight: 1,150 kg, extraction nozzle diameter: 120 mm, table height: 900 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, type of input current: three-phase, pivoting range: 46 °, power: 7.5 kW (10.20 HP), Equipment: motor brake, scorer, Technical data: ===== Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Saw blade retractable under table Ø 400 mm Saw blade swivel range from 0° - 46° Extraction nozzle Ø 120 mm / Ø 80 mm APA saw blade quick-clamping system Electric motor height and swivel adjustment via positioning control Double ball bearing circular saw shaft ensures absolutely smooth running Digital displays for degree setting, cutting height, speed and cutting width Push button switch with electric soft start (start/stop) Safety device can be swung away to both sides Electronic, wear-free motor brake Net weight approx. 1150 kg Fps Iovplu Hoa Rxnlsg Extensions/additional equipment: ===== WIDTH STOP ELECTRIC MOTOR ADJUSTABLE FOR CUTTING WIDTH OF 1250 MM Dimension input on the control panel above via positioning control to 0.1 mm. Stop can be folded down in the parking position to clear a table surface. Safety cut-off bar in case of danger of crushing between width stop and trolley SWIVEL DEVICE for the cross slide including built-in length stop LENGTH STOP WITH DIGITAL DISPLAY ON EACH STOP FLAP Fully assembled, adjustable to 0.1 mm (3 digital displays) with battery operation, length max. 3300 mm THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW REMOTE LOCK WITH 50 MM GRID Blocking of the upper carriage in the loading position on the far right. This allows large panels to be easily aligned on the machine. PRE-SCORING UNIT AUTO-EPS 0.55 KW (0.75 HP) Electromotor positioning for side and height adjustment via LED display and memory function; when the pre-scoring saw is switched on, the unit automatically moves to the set position values; When switched off, the unit automatically moves under the table into a side parking position, so that saw blades larger than Ø 350 mm can be used without removing the scoring saw blades ADDITIONAL CORNER TABLE 750 X 940 MM FOR CUTTING WIDTH 1250 MM as an additional table support in addition to the standard table extension

Condition: used, mileage: 867,722 km, power: 265 kW (360.30 HP), first registration: 04/2009, fuel type: diesel, color: other, axle configuration: 3 axles, empty load weight: 11,060 kg, brakes: retarder, driver cabin: other, gearing type: automatic, emission class: euro4, suspension: air, Equipment: ABS, cruise control, differential lock, onboard computer, , Manufacturer: MAN - Type/Model: TGS 26.360 6x2 - First registration: 02.04.2009 - Mileage: 867.722 km - Number of axles: 3 - Emission class: Euro4 - Gearbox: Automatic - Suspension: Air - Lift axle - Steering axle - Brake: Disc - Length: 9150 mm - Width: 2550 mm - Height: 3200 mm - Unladen weight: 11060 kg - Body manufacturer: ABO - Tank material: Stainless steel - Total tank volume: 16000 L - Tank chambers: 3 - System designation: ABO measuring system - Centrifugal pump - Ebner - Pre-stacker test - CIP cleaning Fps Iswih U Isa Rxnlog

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min feed speeds 1-6000 (y-Achse) mm/min Fj Ia Rjwdta Eoxnljpg feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: excellent (used), Year of construction: 2007, 5-Axis Horizontal Machining Centre for complex heavy-duty machining Heller MCH 450 C Year 2007 Siemens Sinumerik 840D Number of pallets: 2 : Twin pallet changer Pallet size: 800 x 1000 mm Pallet load: max. 2500 kg Pallet changing time: 27 sec. NC Rotary table 4th axis : B 360000 x 0.001° NC Tilting milling head 5th axis: C 360000 x 0.001° Fo Ia Rsmx U T Aoxnljpg Traverses: X 1600 mm Y 1200 mm Z 1700 mm Feeds: X/Y/Z 1-40000 mm/min. Rapids: X/Y/Z 40000 mm/min. Spindle taper: ISO 50 DIN 69871 Spindle front bearing ID: 100 mm Spindle drive motor: 28 / 43 (100% / 40% ) KW Spindle speeds: 45 ~ 6.000 rpm Spindle torque: max. 536 / 822 (100% / 40%) Nm Tool taper: ISO 50 DIN 69871 Tool magazine positions: 100 Tool diameter with/without adjacent tools: max. 112 / 228 mm Tool length: max. 600 from spindle nose mm Tool weight: max. 25 kg Chip-to-chip time (H) : approx. 8.2~12.2 sec. Machine weight: approx. t.b.a. kg Machine dimensions: L x W x H t.b.a. mm x mm x mm Equipped with: 5-Axis simultaneous machining 4th axis NC Rotary table 5th Axis NC swivelling milling head Twin pallet changer 100-station tool magazine Linear measurement scales X,Y,Z axes Tool measurement and tool breakage control Coolant through spindle 50 bar Chip conveyor Proposal Number MH-6298

Condition: used, mileage: 418,000 km, power: 154 kW (209.38 HP), first registration: 09/2019, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Closed box 5.30 L x 2.49 W x 2.30 H – d’hollandia 1500 kg – air conditioning – total 10,500 kg – tare 6000 – wheelbase 3620 – = More information = Front axle: steered; suspension: leaf springs Rear axle: suspension: air springs Empty weight: 6,000 kg Payload: 4,500 kg GVW: 10,500 kg Contact Miguel Cubas for more information. = Company information = Fpe Ia Rewhn Eksxnlog We are located between Antwerp and Brussels along the A12 motorway, nearby the port of Antwerp. Opening hours: Monday till Friday continuously from 8.30 am to 7.00 pm.

Condition: excellent (used), Year of construction: 2010, Used 5-axis CNC machining center Manufacturer: Morbidelli Type: Universal X5HD 36 Year of manufacture: 2010 Working area: X-axis: 3117 mm (4233 mm travel) Fo Ia Rewfm T Iexnlepg Y-axis: 1354 mm (working width) Z-axis: 400 mm (axis stroke) 5-axis electrospindle - liquid cooling 15 HP (continuous operation) - HSK 63F 26-spindle drilling head with integrated grooving saw • 10 spindles for vertical line drilling • 8 spindles for vertical construction drilling • 2+2 spindles for horizontal drilling in the X-axis • 2+2 spindles for horizontal drilling in the Y-axis Infinitely variable drilling speed up to 6000 rpm Rapid 12 mobile tool magazine Side-mounted tool magazine in the tool room 10 - Vacuum pump 100 m³/h - Laser positioning system for traverses and suction cups - Chip conveyor belt - XILOG PLUS control system

Condition: used, mileage: 360,000 km, power: 221 kW (300.48 HP), first registration: 09/2007, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, gearing type: automatic, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, Manufacturer Volvo Model FM300 6x2?4 Simon Moos SLS909 10.500 l. Kombi Year 2007 Condition Good Serial Number YV2JL40C97A643972 Ref. nr. 767842 Reg. date: 12-09-2007 Last seen: Hk: 300 Km: 360000 Fpj Iaswhttyj Rxnleg Gearbox: I-shift Eurotype: 4 Diesel tank: 1 Tank liter: 330 l Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 385/65 Cover% left 30 - 40 - 30% Front suspension: Air Suspension rear: Air Wheelbase: 3700 mm. Toolbox: ? Hydraulic system: ? Total weight: 26000 kg. Net weight: 13680 kg. Load capacity 12320 kg. Manufacturer: Simon Moos SLS909 Tank capacity: 10.500 l. (2500 l. + 8000 l.) High pressure pump: Pratissoli High pressure capacity: 122 l/min - 160 bar. High pressure pump hours: 493 Vacuum pump: Samson TM1600 Vacuum capacity: 1500 m3/h. Vacuum pump timer: 100 Remote control: ? Water heater: ?

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 19000 kg Control Unit Brand SIEMENS Model Siemens SINUMERIK 840 D Main Drive Spindle speed range 45-6000 RPM Spindle motor power 43 kW Tool taper SK 50 Number of axis 4 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 60000 mm/min Y-Axis Movement 800 mm Y-Axis Rapid Traverse 60000 mm/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 60000 mm/min Tools Max tool diameter 112 mm Max tool length 600 mm Type of tool holder SK/HSK 50/A100 Media Air pressure 6 bar Additional Equipment Magazine type: Chain magazine / Magazine capacity: 50 to 100 tools (optional) Tool System and Magazine / Shelf Magazine: 234 slots (SK), increased tool weight capacity X- and Y-axis: 15,000 N (at S3 - 40% duty cycle) / Z-axis: 17,500 N (at S3 - 40% duty cycle) Speeds: Traverse Speed (X, Y, Z): 50,000 mm/min / Acceleration (dynamic package): 4.0 m/s² in X, Y, and Z / Rapid Traverse Speed: 60,000 mm/min / Maximum Acceleration: 7.0 m/s² Spindle Diameter (front bearing): 100 mm Extended Spindle Speed: 12,500 RPM Drive Unit: Power/Torque [max.] (at S6 = 40%): 43 kW / 822 Nm / Speed Range: 45-12,500 RPM (extended) Model: Siemens GRM rotary table with precision package, including temperature compensation and precision cooler Division: 360 x 1° angles / Indexing Accuracy: 6 seconds / Swivel Times for 45°/180°: 2.7 s / 3.5 s High Precision Division (option): 360,000 x 0.001° angles, indexing accuracy 10 seconds, swivel times for 45°/180°: 0.9 s / 1.8 s This 4-axis HELLER MCH 250 horizontal machining centre was manufactured in 2005. It features a robust 43 kW drive power with speeds up to 6000 RPM and a rapid traverse speed of 60,000 mm/min. The machine supports a tool magazine capacity of 50 to 100 tools and a maximum clamping weight of 800 daN on its rotary table. If you are looking to get high quality milling capabilities consider the HELLER MCH 250 machine we have for sale. Contact us for more information. Application Types Milling Fo Ia Rxnowd Uzkslspg

Condition: used, Year of construction: 2016, Functionality: fully functional, Manufacturer: BHK-TEC Microwave Oven Type: MW50-2V Number of Magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Pre-fuse: 250 A Frequency: 2450 MHz Compressed Air: 6-10 bar Year of Manufacture: 2016 Emissions Sound Pressure: 80 dB Frequency: 50/60 Hz Exhaust Air: 2 x 8500 m³/h Intake Air: 4 x 3500 m³/h Intake Air Connection: 2 x 346 mm ø Exhaust Air Connection: 1 x 465 mm ø Dimensions and Weight Fj Ia Rxnewhvcwjlspg Microwave Oven: (LxDxH) 3735 x 2373 x 4756 mm Min. Room Height: 5000 mm Usable Interior Space: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight: 9000 kg Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg

Condition: excellent (used), Year of construction: 2018, 5-Axis horizontal machining center with pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazine. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Fj Ia Rxehuplysnljpg Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Condition: used, Tenoning spindle 1 St Number of milling agregates 3 St. Spindle diameter 50 mm Gubisch type EST-H 2000/2 ----- !Machine still in use and can be viewed! Including Aigner tools built 2010: IV68/78/88 wood-wood-aluminum Eurofold + 4mm rebate clearance Manufacturer description: ----- one-sided angle combination for window and door production consisting of tenoning and slotting machine, angle transfer and milling machine Crosscut saw: ----- P = 3 kW U = 3000-1 Saw diameter: 400 mm Flange diameter: 80 mm Adjustment: horizontal: man. adjustable, readable from mechanical digital display Adjustment range: 0-120 mm Length stop LAS ----- Adjustment: manual Length: extended to 3.2 m Slotting unit (cross machining) ----- P = 9.2 kW U = max. 4500 depends on your tools and is adjusted accordingly Clamping height: 300 mm Useful height: 300 mm Shaft diameter: 50 mm Largest tool diameter: 400 mm max., 240 mm min. Adjustment: vertical Adjustment range: vertical 210 mm under table Number of tools: 3 tool sets of 100 mm each provided by customer 0-height 10 mm Shortest workpiece: 320 mm + tenon Narrowest workpiece: 48 mm Widest workpiece: 170 mm 1. Profile spindle ----- Position of the spindle: vertical right Function: profile production and automatic synchronous immersion P = 9.2 kW U = 6000 rpm Clamping height: 100 mm Useful height: 100 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, tool 0-height 10 mm Number of tools: 1 a 100 mm clamping length max. 2. Profile spindle ----- Position of the spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Flight circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 3. Profile spindle ----- Fo Iev Dmqrja Rxnlspg Position of spindle: vertical right Function: profile production P = 9.2 kW U = 6000 rpm Clamping height: 300 mm Useful height: 300 mm Diameter: 50 mm Cutting circle diameter: 100 - 240 mm Adjustment range: horizontal 70 mm, vertical 100 mm for tool 0-height 10 mm Number of tools: 3 at 100 mm clamping length max. 4. Profile spindle (glass bead saw unit) ----- Position of spindle: horizontal top, right P = 3.0 kW U = 3000 rpm Cutting circle diameter: 250 mm Clamping flange mount: 60 mm diameter Hydraulic adjustment: automatic up/down, forward/backward for 1 Basic height and 1 basic depth Other technical details ----- Clamping table slot unit ----- On ball guide bushing and roller guides Manual swivel range: 60 degrees in both directions Speeds: 0 - 28 m/min. continuously adjustable 4 speed ranges fast feed in front of slot unit slow feed in cutting area adjustable fast feed for transfer fast return Counter wood: counter wood changes automatically with spindle stroke Transfer type in profile area: occurs automatically Operating mode: individual part production, frame by frame Production and series production possible Longitudinal profiling -----...

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, STC-Ref:G-231-0009 Fujifilm Fuji-Luxel-T6500CTP E ,Year: 2018 total plates produced: 19436 pcs. format: 830 x 660 mm equipped: - Advand PST 26 Fpo Ia Rswh R Iusxnlsg - plate size min. 324 x 330 mm - Media thickness 0,15 - 0,30 mm - HB-W425mmfor Press and Plate bending - XMF - server nearl brand new 2022 - software licences jährliche Erneuerung / anual renewal - T-6000 AL V Single Autoloader - produced plates: 19.436 - Interface for Luxel T-6 (Pro-T installation - Resolution: 2400 dpi - transportation belt delivery - Internal plate punch Heidelberg W425 - productivity 11 pl/hr. - plate size max. 830 x 66 mm - waterless plates

Condition: used, mileage: 220,134 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,750 mm, overall weight: 3,000 kg, empty load weight: 2,051 kg, maximum load weight: 949 kg, first registration: 10/2011, loading space length: 1,400 mm, loading space width: 1,550 mm, loading space height: 1,650 mm, emission class: euro4, color: silver, driver cabin: day cab, suspension: steel, brakes: other, number of seats: 9, Equipment: ABS, air conditioning, airbag, cabin, cruise control, disability-friendly, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, * German vehicle * Only 220,134 km * Condition, see photos * Wheelchair ramp at the rear * Wheelchair ramp up to 400 kg * 9 seats * Sliding door on the right with step * 180° rear doors * 6-speed manual transmission * Auxiliary heating * Air conditioning * Cruise control * Heated windshield * Multifunction steering wheel * Driver and passenger airbags * Power windows * Electric mirrors * ABS (Anti-lock braking system) * ESP (electronic stability program) * Central locking with remote control * Heated rear window * Rear wiper * Third brake light * Immobilizer * Power steering * Audio system 6000 (radio/CD) * Rear vent window * Daytime running lights Fpj Ia Rxnjwhzhrjlsg * Fog lights * Wheelbase: 3,750 mm * GVW: 3,000 kg * Unladen weight: 2,051 kg * Payload: 949 kg Kg If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV (German Vehicle Inspection Association), without a new SP (Special Vehicle Inspection Association), and without a new UVV (Anti-Virus Regulations). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer is not misled about their condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors. - .

Condition: ready for operation (used), Year of construction: 2006, operating hours: 37,168 h, Control Unit Brand FANUC Fpe Ia Rxovrltbjnljg Model Series 18i Main Drive Spindle speed range 6000 Spindle motor power 65 kw Number of axis 4 Movement X-Axis Movement 1000 mm Y-Axis Movement 800 mm Z-Axis Movement 850 mm Media Chip conveyor Yes Additional Equipment Cyclone Filtering Pallets This 4-axis DOOSAN ACE-HM 630 horizontal machining centre was manufactured in 2006. It features a Fanuc Series 18i-MB control, spindle speeds up to 6000 r/min, and a spindle power of 65 kW. Equipped with through-spindle cooling at 20 bar, a chip conveyor, cyclone filtering, and 240 APC positions. If you are looking to get high-quality machining capabilities consider the DOOSAN ACE-HM 630 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, operating hours: 50,000 h, Used Bottling Line KRONES with Aseptic Filling 36000 bph The used KRONES bottling line with aseptic filling 36000 bph provides a highly efficient solution for the beverage and dairy industries, meeting productivity and quality demands in high-capacity production environments. This system ensures the highest standard of sterilization, preserving the organoleptic properties and food safety of the bottled product. Furthermore, it is designed to offer consistent performance throughout long production runs. The process combines Blow-Fill-Seal (BFS) and wet aseptic technology, ensuring full aseptic integrity throughout the production flow. Line Speed and Capacity Fps Ia Rxnsv Ew E Ajlog The Used aseptic line KRONES processes 36000 bottles per hour (bph), on the format 500 ml, making it suitable for high-capacity production. It handles PET containers and supports various formats, including 0.3 L, 0.4 L, 0.5 L, and 1.0 L. Moreover, the system can adapt from 250 ml up to 1.5 L bottles, offering a broad production flexibility. In addition, this versatility makes the line ideal for different applications in the beverage industry, including milk, juices, tea, and flavored water. As a result, the line adapts easily to various markets and production demands by configuring different container sizes. Therefore, it offers flexibility for a range of product types. Aseptic Filling Technology in the Used aseptic line KRONES The line’s aseptic filling system eliminates microbiological contamination. Moreover, the sterilization and filling processes occur while keeping the product sealed in aseptic conditions, minimizing preservatives and ensuring a long shelf life without refrigeration. This process is critical for handling sensitive products like milk and fruit juices, which require advanced sterilization to maintain their nutrients and natural properties. Consequently, the line ensures that all products meet stringent quality and safety standards. The aseptic filling technology includes electronic volumetric filling valves with an accuracy of ±0.3%, supporting both cold filling at 20 °C and ambient temperature filling. The system uses a wet sterilization method with peracetic acid (PAA) or hydrogen peroxide, achieving contact times of less than 8 seconds and leaving residuals below 0.1 ppm. Additionally, the filling environment is maintained at ISO Class 5 cleanliness, using HEPA filtration and positive pressure control, ensuring the highest standards of contamination prevention. Key Components of the Line The system manages sterilization with a STORK machine, available in two units. In addition, the system also handles product homogenization with a STORK homogenizer (available in two units). These devices ensure consistent product quality, especially for beverages like milk and juices. As a result, the system achieves uniformity in the final product, improving consumer satisfaction. The UHT system (Ultra High Temperature) uses the VarioDose Krones to treat the product at high temperatures, eliminating bacteria and microorganisms without compromising quality.

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, 5-Axis CNC HSC Vertical Machining Centre with Pallet pool OPS Ingersoll Speed Hawk 650 Year 2009 Andronic 2060 control Proposal Number MV-6444 Pallet size 320 x 320 mm X 550 mm Y 700 mm Z 450 mm 4th axis table rotation axis C 360° 5th axis table swivel axis A -120°/+60° 56 tool magazine positions 36000 rpm. Equipped with: Pallet pool with 5 EROWA pallets 320 x 320 mm. Fischer HF spindle. Fj Ievy H Hrsa Rxnljpg Glass scales in X,Y,Z …and much more Proposal reference MV-6444

Year of construction: 2015, Condition: ready for operation (used), A hydraulically operated Rollomatic precision plunge-cut grinding machine is available. Grinding process: cylindrical plunge grinding, workpiece diameter range: 0.2mm-6.35mm, shank diameter range: 1mm-6.35mm, total workpiece length range: 30mm-60mm, grinding wheel diameter: 200mm, grinding spindle speed: 6000rpm, workpiece speed: 800rpm. Machine dimensions X/Y/Z: approx. 1100mm/800mm/1300mm, weight: approx. 600kg. The machine has only processed about 1500 workpieces. Documentation available. On-site inspection is possible. Fs Iewihzhsa Rxnlopg

Condition: good (used), mileage: 264,274 km, power: 86 kW (116.93 HP), first registration: 12/2020, fuel type: diesel, color: yellow, axle configuration: 4x2, tire size: 305/70R19,5, fuel: diesel, wheelbase: 5,400 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 7,570 mm, loading space height: 2,620 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Unit) - Short Cab - Tail Lift = Remarks = Number of axles: 2, Configuration: 4x2, Tare weight: 7451 kg, Gross weight: 16000 kg, Total tank capacity: 300 liters, 2nd Diesel Tank, Number of Locks: 1, Suspension type: Air suspension, Cab type: Short Cab, Cruise control, Tachograph (Control Unit), Digital Tachograph, Air conditioning, Color: Yellow, Rear view camera, Engine power: 86 kW (115 Hp), Euro: 6, Transmission type: Telligent, Gears: 6, Power steering, ABS, ASR, Tail lift, Tail lift type: Tailgate, Tail lift load capacity: 2000 kg, Tail lift manufacturer: BAR Cargolift, Tail lift material: Aluminum, Tail lift size: 201x254 = Further information = Transmission Transmission: 6-speed, automatic Axle configuration Tire size: 305/70R19.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 9 mm; Right tire profile: 9 mm; Suspension: Leaf spring Axle 2: Twin tires; Left tire profile: 5 mm; Left tire profile: 4 mm; Right tire profile: 5 mm; Right tire profile: 3 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 974 x 255 x 385 cm Weight Curb weight: 7,451 kg Payload: 8,549 kg GVW: 16,000 kg Functional Tail lift: BAR Cargolift, tailgate, 2,000 kg Loading area height: 110 cm Maintenance General technical inspection (AIT): inspected until October 2025 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing fleet • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Fpe Iaewdfbze Rxnljg Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: HEIDENHAIN, total height: 2,440 mm, overall weight: 6,000 kg, spindle speed (max.): 18,000 rpm, space requirement length: 2,500 mm, space requirement width: 2,600 mm, CONTROLS .. CNC controls HEIDENHAIN WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 500 mm .. Y-axis travel: 420 mm .. Z-axis travel: 380 mm SPINDLE / HEAD Fo Ia Rxowfrzdjnlopg .. spindle revolutions (max): 18000 /min .. tool fixture: HSK A63 AXIS DRIVES .. feed velocity (max): 20000 mm/min .. rapid traverse: 50000 mm/min TOOL MAGAZINE .. number of positions: 60 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2500 mm .. space requirements -front/back-: 2600 mm .. total height: 2440 mm .. total weight approx.: 6000 kg ATTACHMENTS .. zero-point workholding system: yes .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Total spindle hours: 38800 hours. machine in production until April 2025 Control system overhauled in 2024

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model Series 18i Fe Iaevf Rzwo Rxnlopg Main Drive Spindle speed range 6000 rpm Spindle motor power 65 kW Number of axis 4 Movement X-Axis Movement 1000 Y-Axis Movement 800 Z-Axis Movement 850 Media Chip conveyor Yes Internal cooling Yes Additional Equipment Cyclone Filtering: Yes Palettes: Yes This 4-axis Doosan HM 630 horizontal machining center was manufactured in 2008. It features a Fanuc Series 18i-MB control system, spindle speeds up to 6000 rpm, and spindle power of 65 kW. Equipped with through spindle cooling at 20 bar, a chip conveyor, and cyclone filtering. If you are looking to get high-quality milling capabilities consider the Doosan HM 630 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, overall weight: 36,000 kg, empty load weight: 6,910 kg, maximum load weight: 29,090 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, loading space volume: 96 m³, first registration: 01/2015, suspension: air, tire size: 385/55 R22,5, Year of construction: 2015, Equipment: ABS, Tara: 6910kg, Peso bruto admissível: 36000kg, Certidão DIN EN 12642 (código XL), Espaço de carga (C A A): 13.620 mm x 2.480 mm x 2.850 mmTamanho do pneu: 385/55 R22.5, Volume espaço de carga: 96 m³, 1° eixo: , 2° eixo: , 3° eixo: , Suspensão ar, Protecção contra o encaixe, Sistema de frenagem electrónico EBS, Suporte para extintor de incêndio, Caixa de ferramentas, Suporte para roda sobressalente, Chassis aparafusado, Odômetro, Ficha de ligação 1x15 e 2x7 pinos, Anti-spray, Telhado de elevação, Fj Iajwg Nvhe Rxnlopg

Condition: excellent (used), Year of construction: 2015, Twin Spindle CNC Turning Centre Goodway GTZ-2600Y Year of manufacture 2015 First installed at the end customer in 2018 Siemens 828D CNC Control 8 controlled Axes Turning diameter 250 mm. Turning length 600 mm. Main spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Fpj Iajhf T N Ss Rxnlog Back Spindle: Bar capacity 65 mm. Spindle drive motor rating 11 KW. Spindle speeds to 4000 rpm. C-Axis 0.001°. Back spindle longitudinal travel B: 690 mm. Tool turret I 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Vertical travel Y: +/- 50 mm (for off centre operations). Tool turret II 16-station Driven tool positions (possible) 16 Tool drive motor rating 3.7/5.5 KW Tool speeds 6000 rpm. Cross travel X2 : 210 mm Longitudinal travel Z2: 620 mm. Complete weight approx. 11000 kg Length 4445 mm Width 2555 mm Height 2360 mm Power supply required 65 KVA Complete with: 3-jaw chuck. Hainbuch collet chuck. Renishaw tool measurement for both turrets. Tool holder package. Coolant system,. High pressure coolant pumps made by Grundfos 30 bar. Chip conveyor. LNS Alpha short bar magazine.

Condition: used, overall weight: 36,000 kg, empty load weight: 6,910 kg, maximum load weight: 29,090 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, loading space volume: 96 m³, first registration: 11/2014, suspension: air, tire size: 385/55 R22,5, Year of construction: 2014, Equipment: ABS, Tara: 6910kg, Peso bruto admissível: 36000kg, Certidão DIN EN 12642 (código XL), Espaço de carga (C A A): 13.620 mm x 2.480 mm x 2.850 mmTamanho do pneu: 385/55 R22.5, Volume espaço de carga: 96 m³, 1° eixo: , 2° eixo: , 3° eixo: , Suspensão ar, Protecção contra o encaixe, Sistema de frenagem electrónico EBS, Suporte para extintor de incêndio, Caixa de ferramentas, Suporte para roda sobressalente, Chassis aparafusado, Odômetro, Ficha de ligação 1x15 e 2x7 pinos, Anti-spray, Telhado de elevação, Fo Ia Rxnswg Nuwolspg

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, tool mount: 50 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 15 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, table length: 6,000 mm, table width: 3,000 mm, year of last overhaul: 2017, power: 0.037 kW (0.05 HP), Equipment: documentation/manual, rotational speed infinitely variable, Offer number V(F)-6895 CNC traveling column milling machine Make SHW Type UniForce 6L Year of construction 2001/2017 overhauled by SHW Control Heidenhain TNC 430M Panel field: 6,000 x 3,000 x 300 mm Travel paths: Longitudinal column travel X 6,000 mm Vertical travel Y 2,600 mm Milling slide transverse path Z1,500 mm Fpo Ijtn A U Uoa Rxnleg Cutting feeds X,Y 2 - 12,000 mm/min. Z 2 - 15,000 mm/min. Automatic head indexing in two planes 340 x 1° / 180 x 1° Spindle drive power 37 / 53 kW Spindle speeds 22 - 4,000 rpm Gear stages (autom.) 2 Spindle holder SK50 DIN 69871 Tool holder SK 50 Tool magazine/automatic tool changer: Tool magazine positions 66 Tool diameter with/without adjacent tools max. 125 /250 mm Tool length max. 400 mm Tool weight max. 25 kg Accessories/equipment: Automatic indexing of the milling head 340 x 1°/180 x 1°. Heidenhain external electronic handwheel HR 410. Linear scales for X, Y and Z axes. Internal/external coolant 10/16 bar. Paper belt filtration unit for coolant. Switchover from internal/external coolant supply to air. Oil cooler for the headstock. Automatic headstock level control - Electromechanical control via 2 vertical ball screws with separate drives, measuring systems and axes. Operating platform with integrated CNC control panel, movable in the X-axis. Radio measuring probe. Chip conveyor 6000 x 350 x 1250 mm. Ethernet interface. Condition Very good condition. Completely overhauled by the manufacturer in 2017 and then delivered to our customer. The machine has been used normally since then.

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, ALMOST NEW CNC Internal & External Cylindrical Grinder STUDER - S141 New in 2023 Fanuc 0i-TF CNC control Swing diameter over the table 400 mm Workpiece length max. 700 mm Internal grinding length 250 mm External grinding length 150 mm X axis: travel 425 mm Speed 0.001 - 20000 mm/min. Resolution 0.00001 mm Z axis: max. travel 500 mm . Speed 0.001 - 20000 mm/min. Resolution 0.00001 mm. Swivelling table Swivelling range continuously adjustable -10 ~ +20° Resolution 0.0001° Workpiece headstock Drive motor 3 KW Speeds 1 - 500 rpm C-Axis C-Axis resolution 0.0001° Circular accuracy for grinding without tailstock 0.0004 mm Grinding spindle setup: Turret, max. 4 spindles Tool table swivelling range -50°~+280° Resolution 0.00005° Tool position 1 - external grinding Tool position 2 - internal grinding Tool position 3 - internal grinding Tool position 4 - internal grinding External grinding 6.5 KW 2430 - 4760 rpm Grinding wheel D 300/127 x 32 mm. External grinding: peripheral speed 50 m/s. Internal grinding T2 18 KW 18000 - 36000 rpm Internal grinding T3 18 KW 18000 - 36000 rpm Internal grinding T4 18 KW 18000 - 36000 rpm Manual C-Form Steady rest for diameter 4 - 140 mm Dressing unit Dressing spindle 0.11 - 0.4 KW Speeds 3000 - 16000 rpm Measuring control for diameter and length Measuring probe Balancing Coolant unit Fpo Ia Rjulz Nzjxnleg Full guarding Proposal Number V-6968