Used Bolinder Munktell Bm 55 for sale (24,757)

Condition: good (used), Volume: approx. 68 liters Usable volume: 55 liters Suitable for solid, liquid or soft products Motor power: 2.2 / 4.0 / 5 kW with jacket Dcjb Esuk Ez Ejtz Ufsg Mobile / tiltable Parts in contact with product made of stainless steel Manufacturer: Stephan Year of construction: 1987 Floor Space: 120 x 80 x 170 cm

Year of construction: 2024, Condition: new, max. cutting height - ø 340 mm min./max. cutting width 80 - 250 mm min./max. side board 18 - 80 mm Dcsb Eteu Izkoz Ufog max. cutting length 6.000 mm feed rate 5 - 30 m/min. sawing motor 2 x 55 kW feed motor 4,0 kW width adjustment motor 0,55 kW infeed roller motor 0,75 kW weight 8,000 Optional equipment Laser adjustment Infeed table extension up to 8.000 mm Automatic width adjustment with 6 fixed dimensions Equipment with 1.000 mm dia. blades Motorized log turning device Electronic braking device

Condition: like new (used), Year of construction: 2007, Horizontal conveyor LISEC KFL-55/22 Dceb Etzsiy Dh He Ufog Maximum working width 2200 mm Motorized With castor rollers Total floor dimensions: L 5800 x W 2300 mm Year of production: 2007 Very good and clean condition Good working order, tested Availability immediate

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, Functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Dsb Etsguqucez Ufecg Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, machine/vehicle number: oq70-55, OilQuick OQ70/55 adapter plate - Year of manufacture: 2023 - in stock & immediately available Price: 4.190¤ net / 4.986,10¤ gross Drawing of the hole pattern in the photos. * 2x plugs 1/2" * 2x pole plugs 3/4" * 2x plug 1" * Also available with plug for leakage oil line! Surcharge: 440¤ net * Excavator class: 18to - 32to * Weight: 302 kg Suitable for many attachments such as hydraulic hammers, sorting grabs and also for the following Westtech products: - Westtech CL320 - Westtech C350 - Westtech C450 - Westtech C550 - Westtech CS610 compact (requires leakage oil line) - Westtech CS580 (requires leakage oil line) - Westtech CS780 (requires leakage oil line) - Westtech R900 - Westtech R1300 - Westtech G1250 - Westtech G1650 - Westtech T4000 - Westtech W1350 - Westtech W1800 Also all matching Westtech products immediately in stock! We are an official OilQuick sales and service partner and also represent the brands Westtech Woodcracker, Seppi M., Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Djb Etz Ujnr Sg Iefscg

Year of construction: 2023, Condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. Dceb Etzek Nf S Re Ufjg MINIMUM 50X50mm MAXIMUM 150X150mm

Year of construction: 2002, operating hours: 26,936 h, Condition: used, Functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, lifting height: 2,400 mm, free lift: 1,000 mm, mast type: duplex, construction height: 2,200 mm, fork length: 1,200 mm, engine type: 4-Zyl. Perkins-Diesel, drive type: Diesel, load capacity: 5,500 kg, Diesel forklift Load center of gravity: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires type: pneumatic Rear tires type: pneumatic Dob Etzsvnw S Us Ufjcg Description: The device is perfectly suited for loading and unloading containers, as the overall height is only 2200 mm!!! Side shift, fork positioner, ATIB fork positioner - NEW!!! 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, air conditioning, full free lift, LED,

Condition: ready for operation (used), Year of construction: 2007, Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Dcjb Etzera Ex Ee Ufeg Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Condition: used, machine/vehicle number: 11974, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 450 mm, mast type: duplex, construction height: 4,050 mm, fork length: 2,100 mm, total length: 3,250 mm, drive type: Elektro, construction width: 3,000 mm, Four-way sideloader Chassis number: 11974 Load center: 1050 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Technical condition: very good Front tires type: Vulkollan Front tires Size: 2-fold new Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Size: 4-ply new Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: New with Aquamatic 5PzS Battery year of construction: 2017 Battery condition: 80 - 100% Description: Travel drive 2x5kW, working hydraulics 2 x 8 kW, steering hydraulics 1x1.5kW height extended 6650 mm platform height 420 mm frame cutout 1300 mm mast extension 2200 mm The machine is sanded down repainted, all motors newly revised new hydraulic hoses and new tires, new battery with Aquamatic and charger so the machine is as good as new again Fork positioner, Dcobeu D R Hus Etz Ufsg implement length over carrier 3950 mm fork adjustment 580-3300 mm fork tilt +/-3.5° side guide rollers on request Roof cover, Glazed cab front and rear

Condition: used, TECHNICAL DETAILS - 4 rotating fittings - 2 polishing heads Dcobeug U E Rj Etz Ufsg - Number of working hours : 28303 [h] - Control : SIEMENS - Type : SIMATIC Dust extraction : 2 - Type : LUMEPULSE S801 Floor space - Dimensions (length-depth-height) : 3000 x 2300 x 2150 [mm] EQUIPMENT - Dust extraction : 2 - Cooling unit : 1

Condition: ready for operation (used), Year of construction: 2001, operating hours: 55,569 h, Functionality: fully functional, travel distance X-axis: 560 mm, controller manufacturer: Fanuc, controller model: 16 MC Professional 3, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 126, TECHNICAL DETAILS Control system: Fanuc 16 MC Professional 3 Travel X / Y / Z: 560 / 560 / 560 mm Spindle speed: 20,000 rpm Torque: max. 167 Nm Tool holder: HSK-A63 DIN 69893 Tool magazine: 126 places Tool change time: 1 s Max. tool diameter: 80 mm max. tool length: 300 mm Distance spindle head to table: 150 - 710 mm distance table-UK-spindle: 80 - 640 mm Pallet size: 400 x 400 mm Dceb Etetzc D Ssz Ufsg Pallet load: 400 kg Pallet change time: 7 s Rotary table indexing: 1° Table speed: 5000 rpm Spindle drive: 22 kW Feed: max. 40,000 mm/min Rapid traverse: 40,000 mm/min MACHINE DETAILS Total power requirement: 64 kW Machine weight: approx. 15 t Space requirement: approx. 9.0 x 3.0 x 2.8 m Spindle hours: 55,569 h Program run: 66,600 h Switch-on time: 163,411 h

Year of construction: 2008, operating hours: 45,000 h, Condition: good (used), Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 2.20 / 8.27 m³ / min at 6 bar min / max: 2.12 / 8.23 ​​m³ / min at 7 bar min / max: 2.04 / 8.19 m³ / min at 8 bar min / max: 1.97 / 8.15 m³ / min at 9 bar min / max: 1.89 / 7.70 m³ / min at 10 bar min / max: 1.81 / 7.35 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Deb Etzogkbfhj Ufocg Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). Dcebjnygvrj Etz Ufeg The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: excellent (used), Year of construction: 2013, operating hours: 4,173 h, Functionality: fully functional, turning length: 455 mm, turning diameter: 250 mm, rotational speed (max.): 3,000 rpm, swing diameter over bed slide: 450 mm, bar passage: 65 mm, TECHNICAL DETAILS Control: FANUC Swing diameter: max. 450 mm Swing diameter over turret: max. 375 mm Turning diameter: max. 250 mm Turning length: max. 455 mm Travel X: max. 190 mm Travel Z: max. 480 mm Rod diameter: max. 65 mm Spindle and tool Speed: max. 3,000 rpm 3-jaw chuck 12-position turret: VDI 30 C-axis: integrated Driven tools: available MACHINE DETAILS Operating hours: 4,173 h Machine weight: 3,800 kg EQUIPMENT - Tool measurement in the machine Dcob Eeu S Rbxotz Ufsg - Tailstock - Chip conveyor - Coolant device - Parts catcher

Year of construction: 2017, Condition: as good as new (ex-display), Punch Durma P 55 Dcebjm Ak R Aj Etz Ufeg Exhibition machine Type: Durma P55 Year of manufacture: 2017 Demonstration machine Strokes per min.: 37 Punching diameter max: Ø 40x10mm Ø 20x20mm stroke: 60mm strokes per min. at 20mm stroke: 37/min

Year of construction: 2023, Condition: new, SPANEX SHB RS 55-70 Briquetting press for sale briquette form-cylinder,70mm motor capacity-5,5kW Production volume-90kg/1 hauer Dcobepbbdve Etz Ufeg

Condition: used, load capacity: 1,600 kg, Cardboard clamp ISO class: ISO class 3 = 2.500 - 4.999 kg Technical condition: good Description: ISO 3A (51 cm) Capacity 1600 kg Opening range 550-1960 mm Clamp length 950 mm Clamp height 1200 mm Width 950 mm ID OS918 Dcobst S Nwao Etz Ufog

Year of construction: 2022, Condition: new, New speedcontroled screwcompressor ALMIG Variable XP 55 Year 2022 Hours: 0 h Technical specifications: Dcob Ejd Ncthotz Ufsg type: Variable 55 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3,20 to 10,52 m³/min at 6 bar : 3,19 to 10,40 m³/min at 7 bar : 3,18 to 10,30 m³/min at 8 bar : 3,16 to 9,60 m³/min at 9 bar : 3,15 to 8,41 m³/min at 10 bar : 3,13 to 8,40 m³/min at 11 bar : 3,07 to 7,62 m³/min at 12 bar : 3,03 to 7,60 m³/min at 13 bar : 2,99 to 7,19 m³/min Installed power: 55 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 74 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2000 mm Width : 1250 mm Height : 1750 mm Weight : 1640 kg

Condition: excellent (used), Year of construction: 2016, ECOTROC ATK 55 adsorption dehumidifier Efficiency 10 m3/min Dcobovfdn Rs Etz Ufjg Year of manufacture 2016 FULLY OPERATIONAL DEHUMIDIFIER.

Year of construction: 2024, Condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Dob Etzsgchbms Ufocg

Condition: good (used), Year of construction: 1989, Drilling capacity in steel (diameter)55 mm throat depth 1600 mm Workpiece height - max.1400 mm Drilling capacity in cast iron 65 mm Quill diameter 80 mm Quill stroke 340 mm Drill spindle taper 5 Speed range - drilling 25 - 2000 rpm Column diameter 350 mm Feed infinitely variable 0.032 to 1.6 Coolant device Yes Cube table 625 x 500 x 495 mm Dsb Etou Sr Ucez Ufecg Table size machine base 1700 x 1000 mm Electric height adjustment Yes Thread cutting device Yes Motor power main drive approx. 5.0 kW Total power requirement approx. 7.5 kw Space requirement approx. 2.50 x 1.00 x 2.8 m Weight 3.5 t Conventional control

Year of construction: 2022, operating hours: 2 h, Condition: new, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2022 Dceb Etsc Rt D Njz Ufjg technical spezifications: type: LENTO 55 WK Possible operating pressures of the system: Delivery quantity at minimum / maximum speed at 5 bar (ue) : 2,10 / 8,17 m³/min at 6 bar (ue) : 2,04 / 8,02 m³/min at 7 bar (ue) : 1,98 / 7,88 m³/min at 8 bar (ue) : 1,91 / 7,73 m³/min at 9 bar (ue) : 1,85 / 7,21 m³/min at 10 bar (ue) : 1,79 / 6,77 m³/min Installed power: 55 kW Protection class / Insulation class Drive motor: IP54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Sound pressure level (DIN 45635 T13) At 50% load: 69 dB (A) At 100% load: 75 dB (A) Compressed air connection: 1 1/2" Dimensions and weight Length : 2300 mm Width : 1400 mm Height : 2265 mm Weight : 1720 kg

Year of construction: 2024, Condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as catalysts, ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Djb Etz Uoku A H Uefscg

Year of construction: 2024, Condition: new, The Rod mill R-BM is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Dcjb Etz Ujgbubcefsg

Year of construction: 2024, Condition: new, The LITech V-BM100 is designed for “1001 laboratory applications”. Dcebogkr Rco Etz Ufog Typical processing times are between 15 and 45 seconds. The Mixer mill can prepare 2 or more samples from 0,2ml of up to 60 ml. It is designed as well for high-sample throughput.