Used Bolinder Munktell Bm 55 for sale (24,763)

Condition: used, overall weight: 32,000 kg, maximum load weight: 25,230 kg, axle configuration: 2 axles, first registration: 06/2012, Equipment: ABS, Müller Mitteltal 2-axle concrete semi-trailer type SF32 BM/BT Body type: HTM 1004 Liebherr 10 m³ from year of construction 2012, BPW axles, drum brakes, air suspension, lift axle, underride guard, EBS, ABS Cj Ia R Rordt H Es Nhjrb 1st hand inspection book Permissible total weight: 32000 KG Unladen weight: 6770 KG

Condition: used, mileage: 574,897 km, power: 266 kW (361.66 HP), first registration: 01/2012, number of seats: 55, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Year of construction: 2012, Equipment: ABS, air conditioning, bathroom, onboard kitchen, parking heater, sleeping cabin,

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Jung Heinrich Type: Esmena Included in delivery: 01x pallet rack traverse, used material color: yellow type of truss: GNA145x55SEG5 box profile: 145 x 55 mm agraffe: 5 hooks clear width: 3.610 mm max. load per truss pair 3.500 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized Cj Ia Rjh Hi Tdo R Nhjrb To secure the longitudinal beams against unintentional lifting out General information about the article: This article is only offered for pickup. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Year of construction: 2002, Underframe with funnel and chain conveyor for material discharge Filter area designed as an inlet or filter chamber with externally loaded filter hoses stabilized by support baskets, pressure relief device in accordance with VDI 3673 Clean air area with purge air fan mounted on trolley, access to the clean air area through maintenance door via ladder with platform and back protection according to UVW Circuit to control the cleaning (depending on the differential pressure) and the material discharge First commissioning in 2002 including rotary valve type V7 (pressure-tight) 1 "dry" fire extinguishing system 1 transport fan (clean gas) 4 vibration dampers 2 Flexible connections 1 circular flow line to feed two on-site containers 2 toggle switches 3 galvanized electric shut-off valves for shutting off the ring running pipe u tue fresh air intake when loading the silo 1 return air duct with 180 degree deflection and simultaneous pressure relief 1 splitter silencer 1 electric switch cabinet ES up to 140 KW 1 complete level indicator for chip bunker 1 pressure measuring device for suction 1 frequency converter type Danfoss VLT 6000 for transport system Filter system Filter area 522 m² - filter hoses 152 pieces (renewed approx. 1.5 years ago) - 1. Extraction fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 2nd exhaust fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 3rd chip transport fan (to the silo) D = 315 mm, motor 18.5 KW, volume flow 6,200 m³ / h. / 2935 rpm. at 50 Hz - Intake socket D = 570 mm / D = 450 mm / D = 350 mm - Chain discharge 0.55 KW - Cleaning with a purge air fan 5.5 KW Cre Ia R Rshbv A Ae Nheb - Control cabinet with control and 3x Danfoss frequency converters Filter dimensions approx. Width = 2400 mm x length = 7500 mm x height = 9750 mm (discharge 2550 mm + 2400 + 2400 + 2400 mm = 9750 mm) Dimensions fan return air housing (2x) approx. Width = 1700 mm x length = 2000 mm x height = 4900 mm Total length of the system (filter + 2x fan return air housing) approx. 18.5 m New price of the system over € 200,000,-- More photos on our website

Year of construction: 2007, Condition: excellent (used), 3 AXIS VERTICAL MACHINING CENTER Crj Ia Rshvr Aue R Nhsb

Condition: new, bore capacity in steel (diameter) 25,0 mm throat 180 mm bore stroke 80,0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16,0 mm column diameter 72,0 mm voltage 400 V total power requirement 1,1 kW weight 57,0 kg range L-W-H 400 x 630 x 990 mm Cre Ia Rovixnas R Nheb scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 60 mm arm length 2000 mm workpiece height max. 1790 mm bore capacity in cast iron 70 mm spindle turning speed range 28 - 1250 U/min Ce Ia R Rjtv Imme Nhsrb spindle taper MT 9 spindle stroke 330 mm feed range - spindle 0,1 - 1,12 mm/U horiz. adjustment of drilling head 1540 mm base plate 1840 x 1000 mm spindle drive 7,5 kW stroke drive 3 kW voltage 500 V / 50 Hz total power requirement 11,2 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,3 x 1,1 x 3,1 m electr./hydraulic column clamping, cube table 500 x 600 x 500 mm, coolant device

Condition: used, fuel type: diesel, motor manufacturer: Cummins 4BTA3.9-G2, Field of application: Construction Empty weight: 1.200 kg Generator capacity: 55 kVA Crj Iaet T Tkaj R R Nhsb Transport dimensions (LxWxH): 2.5x1x1.25 Please contact Sales Department for more information

Condition: used, mileage: 243,525 km, power: 324 kW (440.52 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 40,000 kg, empty load weight: 13,500 kg, maximum load weight: 26,500 kg, tire size: 315/80R22,5, axle configuration: 8x4, number of seats: 2, first registration: 06/2012, next inspection (TÜV): 03/2023, emission class: euro5, brakes: engine braking, suspension: steel-air, loading space volume: 10 m³, driver cabin: day cab, wheelbase: 3,600 mm, Equipment: ABS, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mtlg. House, 1x air seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, cruise control, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, leaf air suspension, aluminum tank, low noise G1, roof hatch, green environmental sticker Wheelbase: 3600 mm Structure: complete train with LIEBHERR concrete mixer trailer type HTM 1004 approx. 10m³ MAN HydroDrive, gearbox ZF 16 S 222 OD, MAN BrakeMatic, M-driver's cab. The offer is for the complete train, consisting of the tractor unit 85630 and the trailer 85637! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! - . Co Iajvy A Ncj R R Nherb

Condition: good (used), Year of construction: 1974, Eccentric press, single-column press, punching machine, single-column eccentric press, eccentric press, single-column press -Manufacturer: Kaiser, punching machine with pliers feed type PO 40 F -Plier feed max. width: 175 mm -Pressure capacity: 55 tons -Stroke: adjustable 9 to 60 mm -Stroke number: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm - Throat: 220 mm -Punch holder: Ø 38 mm -Insert height 335 mm -Dimensions: 1905/1540/H2940 mm Cs Iajilq H Us R R Nhsrb -Weight: 3720 kg

Condition: new, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 10,650 mm, loading space width: 3,040 mm, loading space height: 3,900 mm, Year of construction: 2022, Equipment: ABS, Technical data for EBERT TLS 43 ATV special low loader: * Permissible fifth wheel load: 19,000 kg * Permissible axle load: 36,000 kg * Permissible total weight: 55,000 kg * Empty weight according to DIN approx.: 15,500 kg * Low bed length i.L.: approx. 6,650 mm + 4,000 mm * Axle table length: 3,550 mm Co Ia R R Neh Tvm Ijhsrb * External width: 2,550 mm * Loading edge/low bed: approx. 200 mm - 350 mm * Sliding table length: 500 mm * Widening/low bed to: 3050 mm * Low bed/telescopic by: 4,000 mm * B-dimension: 13,300 mm * Entire vehicle flame-spray galvanized, with epoxy resin primer and 2K paint * Extra-wide signage at the front and rear with red/white signs Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F  Steering: TRIDEC DLS with Tritronic  Axles: 12,000 kg ? DLS independent wheel suspension, hydraulically steered and hydraulically sprung     Front loft bed: * Side walls 600 mm high * Corners on the loft bed angled at the front * Doors in the left and right corners accessible from the outside * Lockable storage box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm * Spare wheel on the loft bed, behind the partition on the right * Stairs on the right-hand side to get from the low bed to the front loft bed * Hydraulic coupling for uncoupling on the left-hand side 6-way Multi-Faster coupling * 6 lashing positions 3,000 kg version outside on the loft bed (drop lashing eyes) * 2 lashing positions 5,000 kg version at the top of the longitudinal strands (to the rear)  Low bed: * Climbing aids on the boom ? Extension * Outer frame t=8 mm * Low bed can be telescoped by 4,000 mm and locked every 500 mm * With sliding table, lockable every 250 mm * 28 lashing positions 10,000 kg, outside version in the outer frame * 24 plug-in tubes 90 x 90, evenly distributed to widen the low bed to 3,050 mm * 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang  High bed at the rear: * High bed slanted towards the front and perforated, for retrofitting ramp support profiles, using adapters, galvanized version * Ramp support profiles at the rear (Altec) ? C - rails * 8 lashing positions 10,000 kg version on the outside of the raised bed * 6 lashing positions 5,000 kg version in the excavator trough * 10 lashing positions 5,000 kg version for extra width in the outer frame * Excavator trough closure at the front and rear with a wooden base plate (plug-in)  Electrics: * Use NATO coil, power comes from the towing vehicle * Rotating beacon in the middle of the rear * Side lights in LED version * Standard rear light for vertical mounting (LC5) * Work lights on the raised bed, to illuminate the low bed * Extra width signs at the front and rear for controlling uncoupling, sensor for safety and pressure switch for the suspension Air: * Aluminum air tank 80 l * TEBS modulator * Locking pull-out left and right (valve on the side in the raised bed at the back) * Double release valve  Hydraulics: Hydraulic system on the High bed for steering, suspension and detachable gooseneck   Accessories: * 2x 4 wooden planks as support for widening the low bed and intermediate table * 2 safety wedges for uncoupling * 4 wheel chocks We can make you a leasing or financing offer on request., Mr. Ebert (Tel. will be happy to assist you., You can find further information on our homepage., Subject to errors and prior sale!

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, Functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 800 mm, displacement volume: 1,047 cm³, injection pressure: 1.778 bar, Equipment: documentation/manual, injection moulding machine KRAUSS MAFFEI KM 420-1900/55 CZ warehouse no.: 503534 manufacturer: KRAUSS MAFFEI type: KM 420-1900 55 CZ controller: MC 4 year of construction: 2004 operation hours: 76000 h technical data clamping unit clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centering diameter of moving platen: 200 mm centering diameter of fixed platen: 200 mm weight of mould: 6700 kg technical data injection unit screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar screw length: 20 l/d screw speed: 527 min plasticising rate: 95 g/s PS injection rate into the open: 953 g/s PS number of heating zones: 6 technical data 2. injection unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³ Distance between sprayer 1 and 2: 300 mm (piggyback ) measures & weight measures of machine l x w x h: 9.83m x 2.33m x 2.48m Co Iaovirx Ee R R Nherb total weight: 23090KG equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components

Condition: as good as new (ex-display), Codition : Unused, year 2019 Brand : Rotodyne Asselbergs Type : CV-1120/900-D16 Weight : 1450 kilograms All employees speak Dutch, German and English Prices are exclusive of VAT Shipping is possible (surcharge) (Changes and errors in the technical data, information and Prices and prior sale reserved Co Ia R R Njvxlw Toherb

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, BVM Brunner GmbH packaging and heat shrinking line consisting of: Packaging machine Brand BVM Brunner GmbH, Type: BM 6030 W, Machine number: 20101045341, Year of construction: 2010, Voltage 400 V, 3 Ph, 50 Hz, plastic tapes, Tape width: 300 mm and 400 mm, Overall dimensions: 1700 mm x 2100 mm x 2000 mm. Shrink tunnel Cro Ia Rev Aa Ize R Nheb Brand BVM Brunner GmbH, Type: SC 6530 SD, Machine number: 20101245342, Year of construction: 2010, Voltage 400 V, 3 Ph, 50 Hz, plastic mesh tape, tape width: 650 mm, overall dimensions: 2400 mm x 1300 mm x 2000 mm. Shrink tunnel: Model SC 65 30 SD - Width 650 mm - Clearance 300 mm - Increased heating power - Double heating zones The shrink wrapping machine welds the upper and lower film, creating a web. A roller is pressed against the web and the film is tightly stretched around the roller. A rubberized tension roller tensions the film, the tension level can be adjusted steplessly. This allows for tightly wrapped stacked products and assemblies such as books, bottles or cans. In many applications the film of a tightly wrapped product does not require shrinking, but if required the product can be passed through a shrink tunnel to shrink the edges of the film to the product

Year of construction: 2016, Condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Cro Ia Reubyyvo R Nheb

Condition: good (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-25-1500-ZR-LK-RH-KF-GK Cj Iaoud Urrj R R Nherb -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gear: Neugart PLE 80 -Quantity: 5 pieces available -Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/piece

Condition: excellent (used), Functionality: fully functional, Leventi BM 4 MM YOU oven in clean condition. Everything works properly. For more information please contact. Crj Ia R R Nst Slfajhsb

Condition: new, Year of construction: 2023, mandrel bending machine ZB 55 H - mandrel length 2000 mm - pipe bender for tubes and profiles up to 54 mm Ce Iasd H Rhie R R Nhorb - solid construction for heavy using standard equipment: - modern electromecanic movement - SPS control unit - up to 1000 different programs - electronic measurement of length and angle - manual stop system - hydraulic tube clamping - adjustable hydraulic pressure - three jaw chuck - total power 5,2 KW - bending speed 28 degrees per second - min. bending radius 50 mm, max. bending radius 150 mm - minimum tube diameter 15 mm - 400 Volt 50 Hz 3 ph. - weight 900 kg HS-Code: 8462 2998

Year of construction: 2013, Condition: ready for operation (used), Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible. Co Ia R R Neuqac Djhsrb

Year of construction: 2012, Condition: good (used), Generator, emergency power generator, generator, aggregate, power generator, power generator, emergency power generator, generator set -Manufacturer: SAB, generator set type D-4107 F -previous use: ship -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW Ce Ia R Rsh I Ez Do Nhsrb -Generator: Marelli type MJB 200 MA 4 -Remark: without control, without cooling -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Year of construction: 2001, Condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Crs Ia R R Njlzizmoheb

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Cj Ia R Reb A Nm Ue Nhsrb -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Recording diameter: 16 mm -Number: 12x motors available -Price: per piece -Weight: 3 kg/piece

Condition: ready for operation (used), X-travel: 500mm, y-travel: 250mm, z-travel: 145mm, table dimensions: 885x320mm, max. load: 250kg, rotational speed: 50-10,000/min, controls: HEIDENHAIN TNC 407, weight: 2.4t, operational hours counter: ca. 39,900h. Cre Iashcxfpo R R Nhjb

Year of construction: 1995, Condition: used, strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Waldys, drive unit for stretch wrapping machine model 55 -Motor: 4 kW / 80 - 16 rpm Co Iju Huuboa R R Nhorb -Individual components: see photos -Dimensions: 640/570/H680 mm -Weight: 120 kg

Year of construction: 1979, Condition: ready for operation (used), Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly. Cj Ia R R Nslp N Evjhsrb