Used Benford Pt 9000 for sale (54,024)

Condition: new, Year of construction: 2025, Edge thickness 0.4 - 3 mm Thickness of glued boards 12 - 45 mm Minimum length of glued boards 80 mm Minimum width of glued boards 60 mm Mechanical feed speed 8 / 11 / 13 m/min. Glue temperature 185 - 210 ℃ Tank capacity 2.5 - 3 kg Bwoln Uov Dt Spen H Rel Pre-milling head speed, main 12,000 rpm Rounding radius R=2mm Working pressure compressed air pressure 6 - 8 bar Pre-milling unit 1.8 kW x 2 Glue application roller unit 0.75 kW Glue heating unit 1.5 kW Final milling unit 0.37 x 2 kW Main milling unit 0.75 kW x 2 Transport belt unit 1.5 kW Overall dimensions 3850 x 700 x 130 mm Weight 1000 kg Pre-milling: diamond cutter. Gluing Cutting Milling: two motors Radial scraper Flat scraper (glue) Spray system Polishing Interior lighting Automatic lubrication

Condition: good (used), Year of construction: 2003, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 900 mm, spindle diameter: 152 mm, FPT MAR-X 3, 2003 CNC SELCA 4045 PLUS DIGITAL, Built 2003, CNC can be changed to Heidenhein 620. FPT TRT25. Rotary Table, 25 Ton. Two axis Head, 144 x 144. X, Column travel 14.000 mm Y, Headstock vertical travel 4.000 mm Z, Ram stroke 1.500 mm W, Spindle Ø 152,4 mm 900 mm Spindle taper ISO 50 Spindle speed 0 - 2.500 rpm Spindle motor 48 kW Automatic tool changer 40 Tools FPT TRT25. Rotary Table, 360.000° 2.500 x 2.500 mm Bweln Uswdm A Hon H Rol Rotary Table longitudinal travel 2.000 mm Table load 25 Ton

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 X travel: 12,000 mm Y travel: 3,500 mm Z travel: 3,500 mm Spindle power: 46 kW Spindle speed: up to 4,000 rpm (2-speed gearbox) Torque: 1,210 Nm Axis speed: 25,000 mm/min X/Y/Z torques: 50/50/50 Nm Tool magazine: 120 positions Boljv T I Iwsn Un H Rowl Max. tool diameter: 230 mm Max. tool length: 400 mm Max. tool weight: 35 kg Head changing station with 3 positions Internal cooling: 20 bar Universal milling head with infinitely variable positioning in both axes Spindle extension 400 mm Spindle extension 700 mm Chip conveyor All axes are hydrostatically guided.

Condition: as good as new (ex-display), Year of construction: 2023, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 80 CNC milling machine direct from the manufacturer. - Machine in cast iron column design for high rigidity - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive in all axes (closed control loop) - Maximum spindle speed of 10,000 min-1 - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs SINUMERIK 808 ADVANCED CNC technology from the technology leader SINUMERIK 808D on PC - Control-identical software package that further simplifies the handling of the machine tool Compact and robust - Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments Communicative - Front panel USB (IP65) - Serial interface RS232C - RJ45 Ethernet on the rear - Technology-specific keyboard layout - Hard keys with protective membrane Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X-axis 20 m/min Y-axis 20 m/min Z-axis 20 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 12 kVA Horizontal milling table Length 800 mm Width 260 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 550 mm T-slots size 16 mm Number of T-slots 5 T-slot spacing 50 mm Load capacity max. 200 kg Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Travel distance X-axis automatic 450 mm Y-axis automatic 260 mm Z-axis automatic 450 mm Distance spindle - column max. 370 mm Vertical spindle Bjlsuy S Eqsn Un H Rjwl Spindle holder BT 40 Speed range 50 - 10000 min¯¹ Power drive motor continuous operation S1 3.7 kW Power drive motor S6-30 % operation 5.5 kW Torque drive motor continuous operation S1 24 Nm Torque drive motor 30% operation S6 36 Nm Feed motor Torque X-axis continuous operation S1 6 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 11 Nm Tool changer Carousel type Number of tool positions 12 tools Tool diameter max. 95 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 7 s

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Bwjln Unov Dvfro H Rol Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), Year of construction: 2008, Control: iTNC 530 X travel: 12,000 mm Y travel: 3,500 mm Z travel: 1,500 mm Spindle power: 37 kW Spindle torque: 1,511 Nm Spindle speed: 4,000 rpm Spindle mount: ISO 50 Tool changer: 120 stations X, Y, Z axis speeds: 25,000 mm/min Head changer: 3 stations 1. Automatic universal head TUPCG Bwoln Unjv T I Dle H Rjl 2. Extended horizontal head SELS4 400 mm 3. Extended horizontal head SELS6 700 mm CNC rotary translation table TRT 50.20 Table top: 2,500 x 2,500 mm Longitudinal travel: 2,000 mm Hydrostatic bearing, B-axis with Double pinion Equipment: - Cooling through spindle 20 bar - Chip conveyor - Workpiece area: 4000 x 2000 x 2 pcs, 2000 x 2500 mm x 2 pcs

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces Bweleuy Tbasn Un H Rel X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Bwoln Ujv Dvkzon H Rsl Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition. Optimill F 300 HSC Premium CNC milling machine direct from the manufacturer. F 300 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation in all axes for high loads - High-torque servo drives, directly on the ball screw in all three axes - Precision-ground, preloaded high-performance ball screw for high rapid traverse speeds in all axes - Telescopic guideway cover on all three axes - Massive, precise milling table with five T-slots, large dimensions and precision grinding - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs - Coolant device with chip flushing system and cleaning gun - Internal spindle cooling 20 bar - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - Oil separator - Machine light in the work area - Additional package SIEMENS material defect liability and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Communicative - Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) Card Sinumerik 828D PPU290 control system - 15.6" color display - 16:9 format System software - SW 28X - 10 MB CNC memory - 1 ms block change time - 150 Look Ahead - 512 tools Complete package - Safety Integrated - Residual material detection and machining - ShopMill work step programming - Manage network drive - 3-D simulation - Marking Equipment details Inline spindle - The direct connection between spindle and motor increases the surface quality and thermal stability. - Mounting SK 40 / DIN 69871 - Spindle speed 15,000 min-1 Milling table - Clamping surface 1,200 x 600 mm Dimensions and weights Length approx. 2856 mm Width/depth approx. 2300 mm Height approx. 2850 mm Weight approx. 6500 kg Rapid traverse speed X-axis 36 m/min Y-axis 36 m/min Z-axis 32 m/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 30 kVA Horizontal milling table Length 1200 mm Width 600 mm Distance vertical spindle - milling table min. 120 mm Distance vertical spindle - milling table max. 750 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 100 mm Load capacity max. 800 kg Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Cooling lubricant system Tank capacity 260 l Pneumatic connection Operating pressure 6 bar Air requirement of the machine 6 - 8 kg/m³ Pump motor Pump motor cleaning gun 0.53 kW Travel distance X-axis automatic 1000 mm Y-axis automatic 620 mm Z-axis automatic 630 mm Spindle holder SK 40 DIN 69871 Speed range 15000 min¯¹ Power drive motor continuous operation S1 20 kW Power drive motor S6-30 % operation 52.4 kW Torque drive motor continuous operation S1 96 Nm Torque drive motor 30% operation S6 250 Nm Feed force Bjln Uovkfdksn H Rswl Feed force X-axis 6.68 kN Feed force Y-axis 6.68 kN Feed force Z-axis 12.01 kN Feed motor torque X-axis continuous operation S1 20 Nm Y-axis continuous operation S1 20 Nm Z-axis continuous operation S1 36 Nm Tool changer Double-arm gripper design Number of tool positions 30

Year of construction: 2025, Condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Bweln Unogp I Upj H Rol Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: new, Year of construction: 2024, This edge banding machine is used for finished edge banding of furniture components with veneer and PVC, ABS etc. edges. The maximum edge banding thickness must not exceed 3 mm. Edge thickness 0.4 - 3 mm Thickness of the glued boards 12 - 45 mm The difference in the width of the rim and the thickness of the board max. 4 mm The minimum length of the boards to be glued is 90 mm Mechanical feed speed 7 m / min Adhesive temperature 130–250 ° C Tank capacity 1.2 l The rotation of the milling heads of the pre-milling machine 9000 rpm Collecting size of the pre-milling machine 0 - 2 mm Rotation of milling cutters of the linear milling machine 10,500 rpm. Rounding radius R = 2mm Trimmer ball rotation 8,800 rpm Rotation of polishing discs 2800 rpm Bwsln Ujgykb Dsn H Rsl Installed power 6.0 kW Compressed air pressure 7 - 8 bar Extraction connector min. 3,500 m3 / h fi 100 mm Extended width. table (steady rest) 560 mm Table working height 856 mm Dimensions (L x W x H) 3200 x 1200 x 1200 mm Net weight 500 kg

Condition: new, Year of construction: 2024, 7.5 kW electric motor Bwoljlk Dxhjn Un H Rel 400V capacity, 3 phases The maximum dimensions of the workpiece 790 x 178 x 2794 mm Cd3zuudzwy Cutting band dimensions 3960 x 34 x 0.9 mm Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064 x 1778 x 1800 mm Track dimensions 4000 x 1030 mm Transport dimensions 2150 x 610 x 810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT electromotive height adjustment

Condition: new, Year of construction: 2024, The machine is designed to cut both soft and hard wood or wood blocks in lengths compatible with the design of the machine. Dry or fresh (raw) wood can also be cut. This model is equipped with a powerful petrol engine. The absence of a power connection allows greater mobility and independence. Maximum cutting length depends on the number of extensions used (optional equipment). In the basic version, it is 2.72 m. 15HP gasoline engine (LIFAN, manual start + key) Capacity 420cc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Bwolnegykfvs Un H Rjl Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2024, 7.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 790 x 178 x 2794 mm Bwslnjid I A Es Un H Rsl Cutting band dimensions 3960 x 34 x 0.9 mm Belt speed 17 m / s Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064 x 1778 x 1800 mm Track dimensions 4000 x 1030 mm Transport dimensions 2150 x 610 x 810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2024, 5.5 kW electric motor 400V capacity, 3 phases The maximum dimensions of the workpiece 660x178x2794 mm The dimensions of the cutting band are 3690x34x0.9 mm Belt speed 17 m / s Bjln Usid I Dfen H Rowl Pitch between the teeth 22 mm Wheel diameter 480 mm Dimensions 4064x1778x1800 mm Track dimensions 4000x900 mm Transport dimensions 2080x610x810 mm Weight 352/380 kg Additional 2 Meter section costs 350 euro without VAT

Condition: new, Year of construction: 2024, The Optimat BD150 Floor grinding machine is the perfect complement to the SDP750 sander. It is ideal for leveling sanding, sanding wooden surfaces, finishing and renovation work, as well as for stairs, corners and edges. Thanks to its compact size, it ensures precise sanding quality. The edge sander is equipped with a powerful motor and an integrated dust extraction system. The BD150 is suitable for Velcro and screw discs. Bweln Ustw Smvsn H Rel The tiltable dust extraction pipe ensures that the dust bag is not damaged. Efficiency 5 m2/h Disc diameter 150 mm Engine speed 11,500 rpm Disc speed 3400/3700 ​​rpm Power consumption 1.1 kW Length of long nozzle 481 mm Dimensions (L x W x H) 552 x 246 x 410 mm Weight (without cord) 10 kg Sound power level 80 dB(A)

Condition: new, Year of construction: 2025, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) Boln Un Hev Du Tno Rewl + 500 euros for the models with inverter (speed control)

Condition: new, Year of construction: 2025, min. / max. veneer thickness 0.4 - 3 mm min. / max. veneer height 12 - 47 mm (optional: veneering up to 60 mm) min. / max. material height 10 - 45 mm min. material width 100 mm Bwjln Uev Dutbon H Rel min. material length 100 mm material pre-milling 2 motors with power (diamond cutter) 2.2 kW feed motor power 2.2 kW panel desk at eye level : chain feed : loading plate for PVC and ABS edges : mechanical pressure zone driven by the main pressure roller and a series of pressure rollers to minimize the glue layer : central pressure setting : container for glue granulate : glue application to the material using a glue roller : electronic temperature control, working temperature 180 - 200 °C pneumatic tape cutting guillotine : control lamp for element spacing : double trimming saw for cutting off front and rear excess material : precise linear guides : trimming in motion for high cutting precision : veneering speed 9.5 m / min flat and round milling top / bottom with vertical and horizontal guidance 2 x 0.55 kW, 12,000 rpm. scraper unit: polishing unit top / bottom 2 x 0.18 kW, 50 Hz, 2,800 rpm. height and tilt adjustment: extraction connector 3 x fi 120 mm, 1 x fi 100 mm, roller table extension 250 mm: noise-reducing housing with a window to view the units: trimming unit 0.44 kW glue roller unit 0.55 kW glue tank heater 2.2 kW compressed air connection 6.5 bar total power consumption 9 kW / 400 V dimensions L. 3590, W. 1220, W. 1686 mm weight 1100 kg • Pre-milling with counter-milling cutters placed on heads ensuring the highest quality of processing. • Front and rear cutting with a double saw. Upper and lower milling on a separate cutter. • Radial or flat scraper (to choose from). -polishing unit • Equipped with a control computer with an LCD display. • Very simple operation with switching on/off individual units with a single button. • In a word, an ergonomic and precise machine at a very favorable price offer, unmatched on the global market. • Standard function of a replaceable glue tank.

Condition: new, Year of construction: 2024, Edge thickness 0.4 - 3 mm The thickness of the glued boards is 8 - 45 mm The difference in the width of the rim and the thickness of the board max 4 mm The minimum length of the glued boards is 170 mm The minimum width of the boards to be glued is 90 mm Mechanical feed speed 9 m / min Adhesive temperature 60–250 ° C 1.2 l tank capacity Rotation of the heads of the pre-milling machine 12,000 rev. / min. Collecting size of the pre-milling machine 0 - 2 mm Rotation of milling cutters of the linear milling machine 12,000 rev. / min. Rounding radius R = 2mm Trimmer ball rotation 12,000 rpm. Rotation of polishing discs 2800 rpm Installed power 6.0 kW Compressed air pressure 7 - 8 bar Bwslnogyi Utj Un H Rsl Extraction connector min. 3,500 m3 / h 3 x fi 125 mm Extended width. table (steady rest) 560 mm Table working height 960 mm Dimensions (L x W x H) 4030 x 640 x 1420 mm Gross weight 915 kg

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 Bolei Nthqen Un H Rswl DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: new, Year of construction: 2024, 15HP gasoline engine (LIFAN, manual start) Capacity 420cc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Bvxbjjoxyr Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT Electromotive height adjustment Bslnolk Dyie Un H Rswl

Condition: new, Year of construction: 2024, Planer: Working table dimensions 300x1500 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 300x25x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 300x660 mm Feed speed 7 m / min Working height 4-220 mm Circular Saw : Working table dimensions 220x1000 mm Shaft rotation 4500/7000 rpm Blade diameter 250x30 mm Processing height at 45 ° / 90 ° 50/80 mm Cutting width with a parallel guide 600 mm The dimensions of the scoring unit are 90x22 mm Milling machine: Bjln Uog S Nz Aen H Rswl Working table dimensions 220x1000 mm Shaft rotation 2000/3100/4400/7000 rpm Shaft diameter 30/35/50 mm 115 mm vertical shaft stroke Tool diameter 160 mm Tenon depth 55 mm Three-phase motor power 3.0 - 2.2 HP - KW Trolley dimensions 2200x315 mm Weight 580 kg Machining accuracy is second to none, and 3 independent motors allow for extremely efficient work. The function can be changed with just one flick of the switch. When cutting with a saw, a special sliding beam is used, as is the case with a panel saw. This technology allows for very high machining accuracy. The thicknesser is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: new, Year of construction: 2024, Planer: Working table dimensions 400x1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400x20x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400x760 mm Feed speed 7 m / min Working height 4-220 mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 380 kg The cast iron structure of the body, the exact limiter of the cross cut and the excellent quality of workmanship allow to achieve the best machining results. Machining is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements. Boln Uneg S N Ago H Rowl

Condition: new, Year of construction: 2024, 27 HP petrol engine (LONCIN, auto start) Capacity 764 cc The maximum dimensions of the workpiece 910 x 4800 mm Bsln Unshg Ahnj H Rswl The dimensions of the cutting tape are 4576 x 40 x 0.9 mm Belt speed 17 m / min Tooth pitch 22 mm Wheel diameter 508 mm Manual feed Dimensions 4064 x 1778 x 1800 mm Extension 6000 x 1010 mm Transport dimensions 2080 x 750 x 830 mm Weight 722/782 kg Option transporting wheels

Condition: new, Year of construction: 2023, Standby power 12kVA/9.5kW Power factor cos φ 0.8 Full load 11.5kVA/9kW Voltage 230/400V Generator power 12/8.3 V/A Number of phases 3 Type of self-exciting alternator Electric start Noise level at 7m 75dB Tank capacity 30 L Electrical box dimensions (D x L)) 245 x 130 mm Oil type CC or CD Air cooling Frequency 50Hz Engine speed 3000 rpm Key/push start Working temperature - 15°C- 40°C Storage temperature - 25°C - 45°C Engine Model 1102F Engine type air-cooled single-cylinder diesel engine Cylinder diameter and length 102 x 88 mm Bwolji Nxhden Un H Rsl Engine capacity 718 cc Fuel diesel 2L oil tank capacity Injection type direct injection Tank capacity 30 L IP rating IP 44 on front panel EURO V emission standard Overall dimensions (length x width x height) 1120 x 640 x 900 mm Weight 240 kg