Used Gesan Dps 200 for sale (16,158)

Condition: ready for operation (used), Main spindle from EMAG VSC 200 DUO, Rexroth 1MR200E-A066 rotor + MS200E-4B-A1/S010 motor + S9124453 brake + SINS-085HW cylinder,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hnjdpfjl Nqyasx Adrsn

Condition: ready for operation (used), ACS RCB-200-LB11A1S , serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Hnodei D Ttlspfx Adrjn

Condition: ready for operation (used), Gero F 100-200/12SO high temperature furnace 201101895 - 30 - 3000°C / Cable length green: 3.9 m, connection cable: 3.00 m, used, good condition, 100% functional, scope of delivery as per photos Hsdex Erpnspfx Adronn

Condition: new, Sick M40E-034023RB0 M 4000 advanced Id. 1 200 067 multi-beam safety light curtain / receiver SN:22041531, unused in opened original packaging, 100% functional, scope of delivery as shown in photos. Hodpfxox Eul Ss Adronn

Condition: new, SKF 7026 ACD/P4ADGA Precision angular contact ball bearing Bore 130 mm Outer diameter 200 mm Width 34 mm < unused > in OVP 100 % functional Hodpfjxahzmex Adrsnn

Condition: ready for operation (used), NUM FS 200504B 200 506 A 26 Alimentation / power supply, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpfx Asi Eb U Hsdronn

Condition: ready for operation (used), Seidel 20K-200/100B - 20K-200 / 100B converter, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hnjdpfx Adsi Ec Nyjren

Condition: ready for operation (used), Röhm ZFM - 200/3 = No.509-04 power chuck, with assembly tool and mounting screws, in original packaging, absolutely new condition Hodei Ec Dmopfx Adrjnn

Condition: ready for operation (used), SM 32/200 sliding module, 200 mm stroke, pneumatic linear actuator, used, minor signs of wear, 100% functional, delivery as per photos. Hnsdpfxsy Rcmhj Adrsn

Condition: ready for operation (used), Adept SmartController EX Rev: F SN:200-0000749, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Hedpfx Adex Eqptorenn

Condition: ready for operation (used), Rexroth MA4 / 200-7101-M inverter, MNR: 1070081513-123 SN, used, normal signs of use, 100% fully functional, delivery scope as per photos. Hsdpfxsx Eua No Adrenn

Condition: new, Sick M40S-034003AA0 M 4000 advanced Id. 1 200 061 multi-beam safety light curtain / transmitter SN:22010211, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hedpfx Adjx Eumcoronn

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-68251 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Hnjdpel Eck Dofx Adren

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press Hodpfx Aozc Dyxedronn - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,511 h, load capacity: 20,000 kg, lifting height: 3,300 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, fork carriage width: 1,900 mm, fork length: 2,500 mm, empty load weight: 22,100 kg, total length: 3,800 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift - LPG powered Fork width: 250 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Cushion Hnedpox A I Rgofx Adrjn Rear tires type: Cushion Description: In addition to this RMF model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdańsk. Visit our homepage - sago-online. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this MAXEIN DWB 200/500G. P.S.: Our master workshop is specialized in repair, servicing, refurbishment, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale. Sideshift, fork positioner, Fork positioner opening range: 710 / 1,710 mm Heater, full cab,

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 8,324 h, load capacity: 20,000 kg, lifting height: 2,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 3,360 mm, fork carriage width: 1,800 mm, fork length: 1,300 mm, empty load weight: 29,210 kg, total length: 3,900 mm, drive type: Treibgas, construction width: 1,850 mm, Compact forklift truck - LPG Load center: 625 mm Fork width: 145 mm Fork thickness: 110 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Hnedpsydr Dzsfx Adrsn Front tires type: Cushion tires Front tires size: 40x20x30 Rear tires type: Cushion tires Rear tires size: 320x600/854 Description: In addition to this Hubtex model, we have around 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GKS200. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and special builds for forklifts from 8 tons and up. We are also happy to offer your vehicle for commission sale at our premises. Sideshift, fork positioner, Heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2012, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 320 kg, total length: 1,750 mm, drive type: Elektro, construction width: 750 mm, Low lift truck Hnodju Dyw Ajpfx Adron Load center of gravity: 600 Fork width: 185 mm Fork thickness: 60 mm Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 24V Battery Ah: 160Ah Description: In addition to this Armanni model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this SL PESATORE 200/200 P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Electronic weighing system

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK INTEGREX 200-IV ST x 1500 mm CNC Turning-Milling Center / Multitasking Turning Machine with Counter Spindle, Milling Spindle, Lower Turret, and 5-Axis Simultaneous Operation Capability. For sale is a very well-equipped Mazak Integrex 200-IV ST x 1500 mm with Mazatrol Matrix control, counter spindle, milling spindle, lower turret, 80-tool Capto C6 tool magazine, high-pressure coolant system, and finished parts unloading system with Schunk gripper. Previous Owner: High-End Medical Technology Company from Baden-Württemberg. Technical Data Manufacturer: Mazak / Yamazaki Mazak Type: Integrex 200-IV ST x 1500 mm Machine Type: CNC Turning-Milling Center / Turn-Mill Center Control: Mazatrol Matrix Serial Number: 2XXXXX Year of Manufacture according to Equipment List: 2009 Max. Turning Diameter: 660 mm Max. Turning Length: 1,495 mm Travel Ranges: X1-Axis: 580 mm X2-Axis: 150 mm Y-Axis: 160 mm Z1-Axis: 1,545 mm Z2-Axis: 1,490 mm W-Axis: 1,550 mm Main Spindle: Spindle Power: 22 kW Max. Main Spindle Speed: 5,000 rpm BB08 Ø 210 mm Internal Draw Tube: Ø 65 mm Counter Spindle: Spindle Power: 18.5 kW Max. Counter Spindle Speed: 5,000 rpm Full C-Axis on the Counter Spindle Milling Spindle: Milling Spindle Power: 18.5 kW Max. Milling Spindle Speed: 12,000 rpm Tool Holder: Capto C6 Tool Magazine: 80-tool Lower Turret: 9-station Lower Turret 15-bar Pump for Lower Turret available / prepared Equipment / Options Mazatrol Matrix Control 5-Axis Simultaneous Machining on the Main Spindle Tool Center Point Control Tilted Working Plane EIA / ISO Programming EIA 3D Compensation High Smoothing Control Rotation / Coordinate Rotation Geometric Function Scaling Function External Data I/O Sub-C-Axis Control Inverse Time Auto TLM Hnedpozc Hipofx Adren Polar Coordinates Input Comparison Stop G54.1 Synchronized Thread Cutting on the Milling Spindle Flash Tool / Flash Tool Preparation Variable 600 Sets Cylinder Function EIA Helical Tap Cycle EIA Pattern Cycle 2nd Auxiliary Functions Ethernet Operating Function including Network Card Network / Ethernet Running Coolant / Chip Conveyor / Peripherals High-Pressure Coolant System, Manufacturer: Streamware Preparation for High-Pressure 70 bar Reinforced Pump for Cover Flushing 15-bar Pump for Lower Turret Flushing System 2.7 bar on Main Spindle Flushing System 2.7 bar on Counter Spindle Chip Conveyor available, Manufacturer: Mayfran (identifiable) Oil Mist Extraction / Air Filter System, Manufacturer: LTA (identifiable) Finished Parts Unloading System with Schunk Gripper Preparation for Bar Feeder Preparation for Multi-Tool Holder Signal Light Yellow Overload Monitoring Clamping Devices / Accessories 2 pcs 3-jaw Chuck, Manufacturer: Kitagawa 1 pcs Hainbuch AxisFix mini Existing Turning Tools available upon request Capto C6 Tool Magazine with 80 Positions Electrical Data according to Nameplate / Photo Voltage: 3 AC 400 V Frequency: 50 / 60 Hz Max. Current Consumption: 128 A Rated Short-Circuit Breaking Capacity: 30 kA Manufacturer: Yamazaki Mazak Corp. VDE Inspection available, Next Inspection Date according to Inspection Label: 10/2026

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 150 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,448 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Stacker Load centre: 600 Mast type: Standard Hnjdpfx Adsyn Su Ieren Technical condition: Very good Front tyre type: Polyurethane Front tyre condition: 100% Rear tyre type: Polyurethane Rear tyre condition: 100% Battery voltage: 24V Battery capacity: 225Ah Description: Factory-refurbished used machine from Toyota including new inspection and new certification according to FEM (formerly UVV). Impulse control, initial lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: simplex, construction height: 1,335 mm, fork length: 1,200 mm, empty load weight: 1,350 kg, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate, Hnsdpfx Aeqynq Redron

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 270 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 512 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low lift pallet truck Load centre: 600 Mast type: None Technical condition: very good Front tyres type: polyurethane Front tyres condition: 100% Rear tyres type: polyurethane Rear tyres condition: 100% Battery volts: 26V Battery capacity: 150Ah Battery year: 2018 Description: Factory-refurbished used unit from Toyota including new inspection and new approval according to FEM (formerly UVV). Hedpfx Adeyv Sl Rerjnn Pulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 360 h, load capacity: 2,000 kg, lifting height: 1,900 mm, fuel type: electric, mast type: simplex, construction height: 1,440 mm, fork length: 1,150 mm, empty load weight: 900 kg, total length: 800 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Load center: 600 Mast type: Standard Technical condition: normal Front tire type: Polyurethane Front tire condition: 60 - 80% Hnedpfsx Nta Asx Adrsn Rear tire type: Polyurethane Rear tire condition: 60 - 80% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2022 Description: Thorough cleaning, black paint refresh, new tires/wheels, new inspection, new acceptance test according to FEM Impulse control, initial lift,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,880 h, load capacity: 2,000 kg, lifting height: 1,700 mm, free lift: 76 mm, fuel type: electric, mast type: simplex, construction height: 1,348 mm, fork length: 1,150 mm, empty load weight: 857 kg, total length: 753 mm, drive type: Elektro, construction width: 770 mm, Pedestrian stacker Load centre: 600 mm Hnodpfx Aoyxtwyedrjn Mast type: Standard Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 26V Battery capacity: 105Ah Battery year: 2019 Description: Factory-refurbished used unit by Toyota, incl. new inspection and new approval according to FEM (formerly UVV). Pulse control, initial lift, CE certificate,

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l feed pressure max. 200 bar coolant capacity 950 l Control Siemens Hnsdpfxjzczkzj Adrsn total power requirement 45 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: excellent (used), Year of construction: 2015, MAZAK QUICK TURN NEXUS 200-II MSY Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control system Mazatrol Matrix 2 - Hydraulic HAINBUCH chuck, combination type, size 65 for main spindle Hnedpfszczd Usx Adren - Hydraulic HAINBUCH chuck, combination type, size 65 for counter spindle - Tool Eye - C-axis - C-axis counter spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders