Used Yuchai Yc15-8 for sale (14,709)

Condition: used, Year of construction: 1989, machine/vehicle number: 108, - no description available - Bob Hnop H S Dko U S Sswl

Condition: used, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by C.N. mm 2500 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed m/min 40 Feed speed with rounders m/min 20 Motorized rubberized pressure belt Belt with bearings with retractable pins (distance between pins mm 500) Squaring part composed of (for each side): Anti-adhesive group Automatic timed anti-splinter group Double shredder group Free space for possible addition of group Edging part composed of (for each side) Gluing group with pre-melting unit and glue tank Automatic adjustment of edge pressure rollers Edge holder magazine with n° 2 positions Two-motor trimming group Overlapping trimming group FK rounding group 0-90° tiltable Tupi group (moving side) Group edge scraper Glue scraper group Brush group Anti-adhesive group Bwsb Hn U Ssv Ipile Sjl

Year of construction: 1994, Condition: excellent (used), Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm sheet thickness: 6 mm / 8 mm on 1000 mm sheet length cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Equipment - autom. cutting angle adjustment - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. Bobolp Nrbs Hn U S Sowl A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 80 Edges thickness in stips / lippings (min/max) mm 0,4 / 20 Numerical Control NC21 Feeding speed m/min 18 Bwsb Hn Usl Iz Tuj S Sjl Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (Hot Melt Glue + Quick Melt system) A20 + A34 Band Pressure zone "C" Edge coils supporting unit (No. 1 reel) Snipping (end-cutting) WK 14 (KW 0.8x2 motors at RPM 12000), pneum. adjust. chamfer/straight Rough Trimming unit Optimat (2 x Kw 1,5) Fine Trimming unit MF20 (2 x kw 0,55) Corners Rounding (contour trimming) Unit FF12 (4 x Kw 0,4) CNC (WD40) Free space for Profile Scraping unit Finish processing unit ( Glue scraper + Buffing unit) FA 10

Condition: ready for operation (used), Yaskawa Model: UTOPE-YN encoder REV.8, used, normal signs of use, 100% functional, scope of delivery as per photos Beb Hn Usvtizxj S Sjwl

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: R95-0839, Extrude Hone Vector Precision Deburring and Polishing System, Model 8/6. Capable of polishing large extrusion and forming dies, deburring and polishing precision parts in small to medium batch quantities. Worktable height 46.5", column spacing 28". Maximum opening 22.75", minimum opening 2.75". Media tube diameter 8". Media tube displacement 628.3". Media extrusion pressure 197-844 psi. Media delivery rate 0-2.53 cubic inches per minute. Hydraulic camping force 22.0-29.4 tons. Includes a 5 hp power pack, and an operator panel SPECIFICATIONS: Year: 1995 Serial No. R95-0839 Media Cylinder Diameter…………8″ Media Cylinder Capacity…………628.3 cu.in. Hydraulic Ram Diameter…………6″ Hydraulic Clamping Force…………29.4 Ton Opening Between Tooling Plates – Maximum…………10″ Worktable Height…………46-1/2″ Distance Between Columns…………24″ Compressed Air Required…………58 PSI Media Extrusion Pressure…………197 – 844 PSI Media Delivery Rate…………0 – 2,053 cu.in./min. Electrics…………230-460V/3Ph/60Hz Dimensions – Approximate Overall when Closed…………41″(L) x 51″(W) x 106″(H) Bsbjryv Ixj Hn U S Sjwl Weight – Approximate…………5,000 Lbs. EQUIPPED WITH: Allen Bradley Programmable Logic Controller (PLC) 20 HP Hydraulic Power Pack Unit Media Displacement & Cycle Timer Counters

Year of construction: 2018, Condition: used, Casemaker EDF Europe 8/21 Introduction 5 colors Automatic slitter Rotary die cutter Folding gluer Counter ejector Bweb Hneumwbpj U S Sel

Condition: good (used), Three-phase motor, electric motor Beb Hn Uecqucyj S Sjwl -Power: 0.8kw -Speed: 680 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: -Number: 1 piece available -Dimensions: 390/248/H280 mm -Weight: 33kg

Year of construction: 2014, Condition: new, machine/vehicle number: RE-HU-2014-1603-1, Filter plate specification 250X250mm Filtering area 0.56m2 Number of filter plate 8pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 7L Filtrate discharge Open type outlet Construction material for framework Main material for framework is carbon steel. Contact parts in PVC or SS. Bjb Hnsb Dluwo U S Sjwl Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 960X400X350mm Weight 350KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) Bjb Hnjfd Ilyo U S Sewl - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels

Condition: repair required (used), - Power: 5,5/7,5kW Bweb Hn U Sjia N Ans Sel - taken from IMA Quadroform

Condition: used, overall weight: 33,000 kg, empty load weight: 7,400 kg, maximum load weight: 25,600 kg, axle configuration: 2 axles, loading space volume: 51 m³, first registration: 06/2001, suspension: air, color: white, tire size: 425/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, air-suspended, last axle with forced steering, ABS (anti-lock braking system), walkway, U-protection, lateral aluminum wheel guard, supports, storage box, rear outlet Bsb Hn U Ssvhlrcs Sswl Body: 2-axle silage trailer with 8 compartments (4m³/4m³/8m³/5.75m³/5.75m³/7.75m³/7.75m³/8m³) approx. 51m³ 2x SAF axles, last axle positively steered, disc brakes, central lubrication, 4x udder outlet! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, 6-axis industrial robot, handling robot, robot, articulated arm robot, robot arm, compact industrial robot DENSO type VM60B1 (VM1300) / VM60B1M-V + RC8A + TP-RC7/8 Robot DENSO VM-60B1M-V Part No. 411800-0100 Serial No. 01C140 Year of manufacture 2019 Version Standard type (VM) Number of axes 6 Handling weight 13 kg Speed combined max. 8300 mm/s Total arm length 520 (first arm) + 590 (second arm) = 1,110 mm Arm reach 1298 mm Working range max. 2600 mm Range of movement: J1: ±170° J2: +135°, -90° J3: +165°, -80° J4: ±185° J5: ±120° J6: ±360° Cycle time 0.95 sec Repeatability ± 0.07 mm User signal lines 10 (for signals from proximity sensors etc.) Controller DENSO Model RC8A-VMA0-NNNP-NM-NNN Part No. 410200-5110 Year of manufacture 2018 Nominal voltage 3 x 200 VAC (for connection in Japan and USA) Bob Hsvi Rz Esn U S Sjwl Nominal voltage 1 x 230 V (single-phase) (for connection in Europe) Rated frequency 50-60 Hz Connected load 3.25 KVA Rated current 8.1 A Peak current max. 16.3 A Control voltage 24 V DC Interface Ethernet (Lan) RJ45, RS232C, 2 x USB Software version 2.5.2 Language DENSO Robotics (PacScript) Control cabinet dimensions W x H x D 335 x 410 x 95 mm Control panel type TP-RC7/8 No. 410100-1761 - Control cabinet with removable "Teach in" operation - Connection cable plugged in - Control cabinet mounted on base - I/O cable for mini I/O included in scope of delivery Weight of control unit 11 kg Robot tare weight 82 kg Total weight 260 kg Space required for transportation L x W x H 550 x 700 x 1800 mm Very good condition

Condition: used, Comec double drilling and mortising machine Horizontal spindles: n.4 spindles (right + left) with 2 oscillations Vertical spindles n. 3 right heads with 3 points each n. 1 right-hand chuck with 1 tip Bob Hn U Ssv Abfnj Sswl n. 3 left heads with 3 points each n. 1 left chuck with 1 tip Maximum length of the workable piece: 900 mm

Year of construction: 2016, Condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Bsb Hsil Agnen U S Sjwl Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Bob Hn Ujhvi E Is S Sewl Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: used, Year of construction: 2020, operating hours: 120 h, Field of application: Construction Drive: Wheel Bjb Hn U Sjuvb Nco Sewl Empty weight: 1.455 kg Lifting capacity: 230 kg Working height: 800 cm Serial number: L000168 Transport dimensions (LxWxH): 1.85x0.76x2.2 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, overall weight: 34,000 kg, empty load weight: 9,620 kg, maximum load weight: 24,380 kg, axle configuration: 3 axles, loading space length: 11,600 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 66 m³, first registration: 04/1986, suspension: air, color: grey, tire size: 385/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), catwalk, tarpaulin, U-protection, lateral aluminum driving protection, supports, side outlet, rear outlet Bjbevhkaro Hn U S Sewl Superstructure: Large-capacity silo with 4 discharge hoppers approx. 41m³ and additional built-in tank approx. 25m³ (total volume approx. 66m³), hydraulically driven pump and tarpaulin 3x BPW axles! Conversion to combi liner approx. in 2013! Tank in tank system! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm Bweb Heu N Ipqen U S Sel oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087

Condition: used, hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump Bwjb Hn Uemxpuhj S Ssl -Manufacturer: Plessey, hydraulic pump type A096X -Electric motor: EMI Type D 112/2R-6/8 24 Volt / 2 kW -Dimensions: 290/115/H130 mm -Weight: 10 kg

Year of construction: 2016, Condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Bweb Hn Ujiryd Uo S Sol Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Condition: used, Year of construction: 2020, operating hours: 172 h, Field of application: Construction Drive: Wheel Empty weight: 1.455 kg Bwobetr Hk Ae Hn U S Sol Lifting capacity: 230 kg Working height: 800 cm Serial number: L000168 Transport dimensions (LxWxH): 1.85x0.76x2.2 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, measuring stand, tripod, dial gauge holder, test stand, dial gauge holder, dial gauge stand, magnetic measuring stand, dial gauge stand Bwob Hnourn Sce U S Sjl -Manufacturer: BYK, measuring stand type 5510 -Measuring scale: 0-1038mm/40 7/8" -Dimensions: 300/200/H1270 mm -Weight: 10 kg

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8" -Intake: Ø 36 mm Bob Hn Uemu Rnps S Sswl -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool Bwjb Hnjgrzuue U S Sjl -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: pipe size 16 - 76 mm/3/8 "to 3 1/4" -Dimensions: 1020/310/H170 mm -Weight: 28 kg