Used Icm Smile 80 for sale (52,895)

Condition: used, Item: D-7858-Busch-Vacuum pump Vacuum Pump Buusch, Type 220-80, Vacuum 0,5 mbar Motor: BUSCK 5,5 kW Celq Rpsc N If Rec Uegt

Condition: used, Year of construction: 2001, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, operating hours of spindle: 39,424 h, A DMU 80P hi-dyn is for sale The machine is no longer connected to the power supply but was running until recently. Cgolq Rjv Ibx Sspc Uet Control: Heidenhain TNC 430 Maintenance carried out in 2024

Condition: new, Edge sanding machine Bernardo HV 80 OSZI work table: 850 x 300 mmTable height adjustment: 90 mmBelt length: 2510 mmBelt width: 150 mmSanding belt rear wall: 950 x 200 mmSanding unit lockable: 90° / 0°Belt speed: 16 m/sec.Additional table: 300 x 250 mmSuction connection: Ø100 mmRoller diameter: 110 mmMotor output power: S1 1005 kW (2.0 PS)Motor input power: S6 401 kW (2.8 PS)Voltage: 400 VMachine dimensions (W x D x H)1400 x 680 x 1220 mmWeight approx. 148 kg Csljd Tb U Seq Rpc Ujgt

Year of construction: 2014, operating hours: 5,038 h, Condition: used, Functionality: fully functional, fuel type: diesel, total length: 3,720 mm, lifting height: 3,350 mm, free lift: 110 mm, mast type: telescopic, construction height: 3,010 mm, fork length: 2,000 mm, fork carriage width: 2,180 mm, engine type: Deutz, drive type: Diesel, load capacity: 8,000 kg, construction width: 2,140 mm, net weight: 15,760 kg, Diesel forklift Load center of gravity: 900 Fork width: 150 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Gearbox: Electromechanical Colq Rpsvvd Dmjc Ujgt Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 300-15 Rear tires type: Superelastic Rear tires size: 250-15 Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by email or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used vehicle, even if you don't buy a vehicle from us. Hire purchase & financing at favorable conditions are available on request. We will be happy to provide you with expert and detailed advice on our vehicles. Side shift, fork adjustment device, 3rd valve, 4th valve, rear work light, front work light, heating, soot filter, full cabin, CE certificate, twin tires, safety light, interior mirror, exterior mirror, joystick, rotating beacon, windscreen wiper, single pedal, LED, seat,

Condition: used, Year of construction: 2004, diameter 10- 80 mm length 1200 mm weight of the machine ca. 0,6 t dimensions of the machine ca. 1,6x 1,7 x 1,5 m Celqevvcdls Rpc Uogt used short bar feed magazin - moveable user panel - 1x pushrod

Condition: ready for operation (used), Year of construction: 1984, Immediately available from location: Hydraulic press brake Voest Type BAH 80 / 3 Year of manufacture 1984 Pressure output 80 tonnes Working length 3000 mm Column clearance 2550 mm Stroke 175 mm Cslev Hwv Djq Rpc Usgt Thrust 300 mm Drive 7.5 kw Weight 6 tonnes Complete upper and lower tools Price of EUR 3,500.—plus VAT from location

Condition: excellent (used), Year of construction: 2000, CNC 5-axis universal machining center DECKEL MAHO DMC 80 U YEAR OF CONSTRUCTION: 2000 CONTROL: HEIDENHAIN New spindle 2023 Technical data: x-travel 800 mm y-travel 700 mm Cslq Rpcjvv Uy Es Uogt z-travel 600 mm Spindle speed: 0 - 12000 rpm Milling spindle drive: 10.0 KW Tool holder: ISO 40 Table size: 800 x 635 mm Machine weight approx.: 11 tons

Condition: good (used), ring cutting machine, cutting device, cutting pliers, cutting machine, ring, disc, segment and strip cutting machine, ring cutting machine -Manufacturer: Klinger, ring cutting machine -Cutting range: 80 - 1250 mm -Cutting thickness: up to 9 mm -Dimensions total 1100/170/H280 mm -Weight: 6.4 kg Colqevunuge Rpc Usgt

Condition: new, Bernardo universal milling machine UWF 80 E incl. 3-axis digital display & y feed Technical specifications Table size 1000 x 240 mm ISO 40 spindle adaptor Spindle speeds vertical (8) 115-1750 U/min Spindle speed horizontally (9) 60-1350 RPM Quill stroke 125 mm Travel longitudinal (x) 590 mm Stroke transverse (y) 180 mm Travel vertical (z) 320 mm Distance from spindle / table 0-375 mm Throat depth 230-685 mm Swivel table 45 ° to + 45 ° Headstock Swivel range 90 ° to + 90 ° Feed range longitudinal (8) 32-700 mm / min T - slot size 16 mm Power vertical 0.85 / 1,5 kW Motor power horizontal 1.5 kW Machine dimensions (W x D x H) 1500 x 1430 x 2100 mm Weight 980 kg Scope of delivery • 3-axis digital display ES-12 H with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system • Automatic platen feed for X-axis • Automatic platen feed for Y-axis • Adapter ISO 40/MK 3 • Adapter ISO 40/MK 2 • Adapter ISO 40/B 18 Cgslsd Erttsq Rpc Ust • Long milling ISO40/27 mm • Adjustable guard • Protective cover for horizontal milling • Horizon algal gene storage

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 02.291.00, installation height: 950 mm, distance table to ram: 700 mm, retraction force: 450 t, pressing force: 100 t, oil tank capacity: 200 l, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Pressing force: max. 1,000 kN Retraction force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (steps 100 mm): 1,150 mm Ram stroke without swivel device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm max. possible ram stroke (steps 100 mm): max. 1,200 mm Mold weight: max. 5,000 kg Load of the upper clamping plate: max. 2,500 kg Load of the tilting device: 3000 kg Tilting angle: 65° Positioning accuracy Plane parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Closing speeds Closing speed: max. 50 mm/s Opening speed: max. 50 mm/s Standard carriage speed: max. 50 mm/s Increased carriage speed: max. 200 mm/s Swivel-off speed standard: max. 50 mm/s Swivel speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Increased tilting speed: max. 100 mm/s Hydraulics Colqou Szzco Rpc Uogt Closing system pressure: max. 190 bar Opening system pressure: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Table ejector force: max. 35 kN Ejector stroke table: max. 130 mm Ejector movement table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Die cushion Die cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, worktable width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director Cgolq Rpjrntirec Ust UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: used, Year of construction: 2015, operating hours: 3,815 h, total length: 4,160 mm, wheelbase: 2,800 mm, ground clearance: 10 mm, lifting height: 210 mm, mast type: standard, fork carriage width: 900 mm, drive type: Elektro, load capacity: 8,000 kg, construction width: 900 mm, net weight: 1,515 kg, Warehouse technology Genkinger ESU 80 SO Drive Electric Year built 2015 Cgjlqovw Df Te Rpc Uet Lifting height (mm) 210 Lifting weight (kg) 8,000

Condition: used, Functionality: fully functional, machine/vehicle number: H2X396H00103, Year of construction: 2017, operating hours: 3,541 h, load capacity: 8,000 kg, lifting height: 3,450 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 2,830 mm, fork length: 2,400 mm, drive type: Diesel, net weight: 12,495 kg, Diesel forklift Fahrgestellnummer: H2X396H00103 Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Superelastic Cgoljr Nl Eweq Rpc Uet Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heating, STVZO, full cab,

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, LVD PPEB EQ 80/25 MNC95c Year 1998 80 ton folding capacity over 2500 mm MNC95c full colour 2D graphical controller 6 axes (Y1, Y2, X1, R1, Z1, Z2) Erwin Sick FGS light guards Colqeryr Dqo Rpc Uegt Side and rear fixed interlocked guards Tooling Manuals This machine has been decommissioned and cleaned in preparation for sale, prior this machine has been fully serviced and maintained to the highest level. Please feel free to contact me if you have any further questions

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS OPEN 231. Software IMAWOP Portal Loading and Unloading System No. 2 Working tables (with pods and rails), each one with No. 4 Support rails (tot. 8) DYNAPOINT LED system on the rails for the vacuum pods positioning (Y-axe) and on the basement for rails (X-axe) Automatic Tools Changing System. Tools storage plate (No. 2 x 18 of folds-positions) Max. useful working area (X - Y - Z) mm 5100 x 1400 x 180 Workpieces dimensions (X - Y - Z) 2 x (mm 2350 / 2200 x 1400 x 60) (N°) 2 Working Areas Celq Retixqkepc Usgt 2 x Vacuum pump (capacity m3/h). Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (Drilling head motor-power: Kw 4 ca.) No. 1 Vertical electro-spindle (HSK F63) with motor power (Kw) 18. With C axe, 360° No. 1 Edge Banding unit (always ready on board) VT 100. Glueing Unit (Hot Melt glue) Edges (tape) thickness in rolls (min/max) mm 0,4 / 3. Edge coils supporting unit (No. 2 reels) No. 2 Pre-End cutting (pre-snipping) Unit OPTIONAL: Circular saw aggregate (diam. mm 200) OPTIONAL: Combined aggregate (Flush-Trimming/Scraping) OPTIONAL: Drilling Aggregate (with 4 horizontal boring spindles)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm Cgoljgwa Urjq Rpc Uot 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: like new (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: S0705-1047, Bar feeder EMT SUPER 80 Max lenght bar : 1550 mm Cgjlq Rpcov Ux Sce Uet Max diameter of bar : 80 mm In exelent condition . As new .

Condition: not inspected (used), turning diameter: 6,300 mm, center width: 1,000 mm, workpiece weight (max.): 80,000 kg, overall weight: 15,960 kg, Used machine min. diameter: 1000mm max. diameter: 6300mm Cgelevtq H Njq Rpc Ujt Workpiece weight 80,000 kg EG: 15,960 kg

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, rotational speed (max.): 18,000 rpm, CNC Heidenhain iTNC 530 WORKING AREA: Longitudinal travel X: mm 800 Cross travel Y: mm 800 Vertical travel Z: mm 800 FEED: Feed speed X, Y, Z: mm/min 60.000 Rapid X, Y, Z: m/min 60 SPINDLE: Spindle attachment cone: ISO 40 Cgjlqjv Igpij Rpc Uot Spindle rotation speed: rpm 18.000 TABLE: Workpiece holder surface: mm 900 x 700 Max. table load: kg 1.400 TOOL MAGAZINE: Magazine places: places 120 Chip-to-chip time: sec 5 Machine complete with: • Renishaw probe • Tool presetting • High pressure 40bar with filter paper Year of manufacturing: 2005

Condition: used, Functionality: fully functional, Year of construction: 2013, operating hours: 3,722 h, lifting height: 26,400 mm, lifting power: 227 kg/m, fuel type: diesel, color: red,

Condition: excellent (used), Year of construction: 2004, operating hours: 13,265 h, Baler Paal Likon 80/60, year of manufacture 2004, very good condition Technical data: Manufacturer Paal Type Likon 80/60 Year of manufacture 2004 Operating hours 13265 Pressing force 60 t Drive power 75 kW Total output 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, variable length 4-fold automatic tying Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Cgolq Rpovkwt Roc Uot Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Accessories: Hopper Version with a 520 l pump, drive 75 kW, for a capacity increase to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. The operating instructions and EC Declaration of Conformity are available in German. Remark: The machine is in very good condition. It was checked and tested by us in 28816 Stuhr. The video can be found above with the pictures, or on our website or our Youtube channel. Viewings, also under power, are possible at any time by appointment. On request, we can also carry out tests with your equipment for a fee. We are also happy to answer questions about the machine by telephone from Monday to Thursday from 08:00 to 14:00. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and revocable at any time. Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: MSV 250x250/7 VVM-P-6-80-PO-LML, overall weight: 125 kg, type of input current: AC, temperature: 80 °C, power: 0.05 kW (0.07 HP), space requirement height: 570 mm, space requirement length: 1,822 mm, input voltage: 250 V, space requirement width: 410 mm, frequency: 50 Hz, pressure: 6 bar, Equipment: documentation/manual, Fully Automatic Magnetic Separator for Dry Mixtures: OUR MACHINE HAS NOT BEEN USED BEFORE. IT WAS IMPORTED FROM EUROPE FOR THE PROJECT. IT IS IN ZERO CONDITION SINCE THE PROJECT WAS CANCELLED. IT DOES NOT REQUIRE AN OPERATOR, IT IS FULLY AUTOMATIC. IT COMPLIES WITH EUROPEAN FOOD REGULATIONS! Brand: MAGSYS Model: MSV 250x250/7 VVM-P-6-80-PO-LML Technical Specifications: *Made entirely of stainless steel. Inlet and outlet dimensions are 250x250mm. Csljv S U Ibeq Rpc Usgt *NdFeB Natural Neodymium Magnet - upper part consists of 4 and lower part consists of 3 magnetic tubes with a diameter of 30mm. *Magnetic Induction 17,000 Gs Surface 12,000 Gs, 129 N Breaking Force, *The magnets on the device can catch metal dust up to 1 micron. *The maximum operating temperature of the magnets is 80°C. *The magnetic separator is fully automatic. The magnets are self-cleaning. The flow does not stop during cleaning. *Siemens Simatic S7-1200 - Color Touch Panel is used. *Festo brand pneumatic components are used on the system. *Cleaning time, total cleaning number, total service number, air pressure error number can be taken as data on the PLC screen.

Condition: excellent (used), first registration: 06/1994, color: other, Year of construction: 1994, Equipment: ABS, = Additional options and accessories = - Air suspension Cgslq Rpcouu Df Ro Ust = Additional information = Technical condition: very good Visual condition: very good

Condition: as good as new (ex-display), Gear motor make Getriebebau Nord type SK-80 LI4TF i=21,28 n2 65 min/1 400 volt 0,75 kw YEAR 2011 unused from magazine weight 19,5 kg transport dimension : Cgelq Rpelrt Tuec Ujt L.480 mm W.160 mm H.240 mm

Condition: new, 6 St. range L-W-H 720 x 580 x 800 mm weight 100 kg 100Kg je Lade Stable tool cabinet with 6 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Cgjlsvbliboq Rpc Uet Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray