Used Huvema Hu300 Cso for sale (30)

Condition: used, Year of construction: 2005, cutting diameter 178 mm saw band length 2265 mm cutting width 225 mm dimensions of saw-band 2265 x 20 x 0,9 mm band speed 30 / 60 m/min capacity 90 degrees: round 178 mm Dedpfx Aerzwwrsamjku capacity 90 degrees: flat 225 x 110 mm capacity 45 degrees: round 140 mm capacity 60 degrees: round 85 mm total connected load 0,75 kW weight of the machine ca. 165 kg dimensions of the machine ca. 1100 x 700 x 1650 mm Furnishing: - Coolant device - band saw blades

Year of construction: 2004, condition: used, cutting range 90°: 90 mm cutting range 45°: 75 mm Saw blade diameter 315 mm Table dimensions 800 x 500/400 mm Saw blade 30 mm machine weight ab. 45 kg dimensions 850 x 600 x 430 mm Dedpfx Aaed Ih Nkjmeku

Condition: excellent (used), Circular saw Brand: Huverne Dodpfxswt Rt Io Aamsku Model: HU 315 C Saw blade diameter: 315 mm Cutting capacity: diameter 100 mm / square 90 mm Mitre: 2 × 75 degrees 2 speeds: 18/36 rpm Coolant device Motor: 400 V 0.75 – 1.3 kW Accessories: 1 coarse and 1 unused, fine-toothed saw blade

Condition: good (used), Year of construction: 2021, – Year of manufacture: 2021 – Centre distance: 910 mm – Swing over bed: 300 mm – Swing over gap: 430 mm – Swing over cross slide: 178 mm – Spindle bore: 38 mm – 60/2000 rpm – Longitudinal and cross feed – Digital readout – Multifix with 4 tool holders – Safety guard – Three-jaw chuck Dkjdjxhx S Espfx Aamsu – Emergency stop switch – Documentation – 400V

Condition: used, Year of construction: 2003, saw blade diameter 250 mm capacity 90 degrees: round 70 mm capacity 90 degrees: square 65 mm turning speeds 52 / 104 U/min Dedpfx Aovkiypeamjku total power requirement kW weight of the machine ca. 0,13 t dimensions of the machine ca. 800 x 600 x 1500 m Manual cold circular saw with: - Mitre 45°/45° - Machine base

Condition: good (used), Year of construction: 2004, Used drilling machine from Huvema Type: HU 30 TI Dkodpfx Aow Na Dtoamju Capacity up to 30 mm Automatic feed for drilling Year of manufacture: 2004

Condition: used, Year of construction: 2015, cutting diameter 230 mm capacity 90 degrees: flat 320 x 130 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: flat 230 x 140 mm capacity 45 degrees: round 220 mm capacity 45 degrees: square 190 x 190 mm capacity 60 degrees: flat 120 x 105 mm capacity 60 degrees: square 105 x 105 mm capacity 60 degrees: round 120 mm Dkedpoxaa Rajfx Aamou turning speed range: 35 - 70 m/min dimensions of saw-band 2720 x 27 x 0.9 mm height of material-table 950 mm total power requirement 1.0 / 1.5 kW weight of the machine ca. 410 kg dimensions of the machine ca. 800 x 1550 x 1450 mm New price ~ 6.500 euros Furnishing: - semi-automatic miter band saw, for cuts -45 / +60 degrees continuously - Infinitely variable saw feed via precision throttle - Infinitely adjustable cutting speed - Cooling device - Horizontal vise electrically-mechanically acting - Saw band - rotating - front control panel - User manual in German

Condition: used, Year of construction: 2000, machine/vehicle number: xxxx, Order No. 22510 Technical Specifications: - Sawblade dimensions 315 x 2.5 x 32 mm - 2 sawblade spindle speeds approx. 40 + 80 rpm - Cutting range at 90°: round 95 mm - flat 110 x 70 mm - at 45°: round 90 mm - flat 85 x 70 mm Djdpfx Aasv I T Daemeku - Miter adjustable left + right up to 45° - Material clamp - Drive 400 V / 0.75 / 1.3 kW - Space required approx. W 700 x H 1400 x D 700 mm - Weight approx. 200 kg

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 40 mm throat 350 mm bore stroke 180 mm no. of turning speeds 18 Stufen spindle turning speed range 50 - 1450 U/min feeds 0,1 - 0,2 mm/U spindle taper MT 4 table surface area 560 x 560 mm Djdpfxjvcrm Nj Aamoku base plate 730 x 500 mm Distance spindle/table max. 500 mm column diameter 150 mm distance spindle/base plate 1100 mm Total height 2400 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 4,2 x 0,7 x 2,2 m Industrial, gear-driven drilling machine, with coolant device, adjustable drilling depth, left-hand and right-hand rotation of the spindle, motor with 2 speeds, work light, table can be rotated and tilted,

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, coolant pump power: 100 W, motor voltage: 380 V, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Dsdpfx Ajtwdvioamsku Weight: approx. 150 kg

Condition: new, sheet width 1020 mm plate thickness 2,0 mm distance between columns 1050 mm daylight opening 46 mm 135 ° total power requirement Handbetrieben Djdpfowu Hiuex Aameku weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,75 x 1,2 m Segment bending machine new, with slight color defects Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 270

Condition: new, 1 brand new horizontal band saw machine with double miter Brand: HUVEMA / BEKA-MAK, Origin Türkiye Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangle 320 x 130 mm Djdpjfk Ew Esfx Aamsku Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 760 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power Coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Mitering on both sides using a swivel frame o The material to be sawn remains straight in the room! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Quick-release vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Limit switch at end of cut • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M Dkodpfxjxaa D Tj Aamju - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: new, Year of construction: 2024, width of the strips 75 mm band length 2000 mm band speed 37 m/min Dkedpfx Asvcrnajamju total power requirement 3 kW weight of the machine ca. 0,084 t dimensions of the machine ca. 1x0,5x1 m New device

Condition: new, sheet width 1020 mm plate thickness 2,0 mm distance between columns 1050 mm daylight opening 46 mm 135 ° Dkedpfswu Hizjx Aameu total power requirement Handbetrieben weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,75 x 1,2 m Segment bending machine new, with slight color defects. One bending segment is slightly damaged. Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 270

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm Dsdpjvyidmjfx Aamoku +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2013, plate thickness 1,6 mm pressure 450 MPa 150 x 150 x 90° table surface area 650 x 500 mm 875 mm cutting angle - upper blade 4 ° weight of the machine ca. 0,075 t • manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, Dkodpfx Aast Smgxjmsu - aluminium to 2.25 mm, - plastic to 3.0 mm, • machine for demonstration

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm Dkjdpfx Aju Sbpvsamou capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: good (used), Year of construction: 2019, saw-blade dia. 370 mm Dkedpfx Ajvxli Nsameu cutting capacity - round 115/ 90° mm cutting capacity - square 110 x 110 /90° mm cutting capacity - flat 110 x 110 / 90° mm cutting capacity - flat 100 x 100 / 45° mm cutting capacity - round 115 / 45° mm cutting capacity - square 100 x 100 /45° mm saw blade turning speeds 22 / 44 U/min voltage 400 V / 50 Hz Motor output 3 kW machine weight ab. 0,27 t Dimensions (L/W/H) 980 x 790 x 780 mm • New, unused saw • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 45° left, 45° right

Condition: good (used), Year of construction: 2016, saw-blade dia. 315 mm cutting capacity - round 100/ 90° mm cutting capacity - square 90 x 90 /90° mm cutting capacity - flat 85 x 110 / 90° mm cutting capacity - flat 85 x 85 / 45° mm cutting capacity - round 100 / 45° mm cutting capacity - square 85 x 110 /45° mm saw blade turning speeds 25 / 50 U/min voltage 400 V / 50 Hz Motor output 1 kW Dksdpfx Aevxlkaeamsu machine weight ab. 0,24 t Dimensions (L/W/H) 980 x 790 x 780 mm • unused exhibition machine • saw is fitted on a lower frame, • 2-step motor, • pneumatical quick clamping vise, • material back stop, • coolant device, • mitre ability: 45° left, 45° right

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 30 mm throat 255 mm bore stroke 110 mm spindle turning speed range 80 - 3490 U/min spindle taper MT 4 table surface area 420 x 480 mm base plate 600 x 370 mm Distance spindle/table max. 700 mm distance spindle/base plate 1200 mm voltage 400 V / 50 Hz total power requirement 1,1 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 1,2 x 0,7 x 2,3 m 2-stage motor, 1.1 / 1.9 Kw, drill chuck protection, drill chuck, work table rotatable and tiltable, Dkedpst Smigsfx Aamju

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec Djdpjvcrmvefx Aamjku feed up 5,82 mm/sec column daylight 820 mm oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm spindle turning speed range 100 - 1450 U/min feeds 0,1 - 0,2 mm/U spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection Dksdpfxet Smkkj Aamju

Condition: as good as new (ex-display), Year of construction: 2021, plate length 1550 mm plate thickness 2 mm number of rolls 3 roll diameter 90 mm min. bending diameter 100 mm weight of the machine ca. 0,56 t dimensions of the machine ca. 2,5 x 1,0 x 1,4 m • motorical driven round roll, Dkjdot Smh Nspfx Aameu • back roller by hand wheel adjustable (can be adjusted to bend conically), • bottom roll adjustable • top roll can be swivelled to take out the work piece

Condition: used, Year of construction: 2020, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW Dsdpfx Aasvblayjmoku weight of the machine ca. 0,11 t dimensions of the machine ca. 1x0,5x1 m Demonstration unit, rarely used