Used Bens 250 for sale (18,692)

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Djlq Rofv Av Iegr Tjcg Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: not inspected (used), Year of construction: 1979, Schechtl swivel bending machine Mabo 250 Working width 2500 mm at 1,0 mm Year of manufacture 1979 Serial number: 612 Foot switch defective Dimensions LxWxH 3270x650x1050 mm Dcjlod N Nineq Rgr Teg

Year of construction: 2002, Condition: excellent (used), Model: ES 750H330W/250 HL-2F Year : -99 Dcslq Rgsiv Swxor Tjg

Condition: refurbished (used), We repair all types of Heidenhain handwheels, e.g. HR 250, HR 330, HR 410 New housings and cables available, e.g. for HR 330 Dslqeq Slprs Rgr Tjcg Also available as exchanges. Please feel free to ask about your type.

Condition: used, DEMAG chain hoist: 1st type: PK 2 N-F - 250 kg. 2nd type: PK 2-F - 500 kg. Djlju U U Hdsq Rgr Tjcg 3rd type: PK 2 N-F - 250 kg.

Condition: new, Year of construction: 2022, Functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm Doljubbrysq Rgr Tjcg - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Year of construction: 2020, Condition: new, Radial fan ZWWOAX 100 up to 250 degrees Celsius Stainless steel acid-proof fan. New, never used. Inlet diameter fi 1000 mm Possibility to select parameters depending on the needs. Capacity from 40000-85000 m3/h Dcjlq Rgremi Txzj Tog Delta Pc from 500 - 3000 Pa Price without engine

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 500293122/230, overall weight: 320 kg, total width: 960 mm, total length: 1,640 mm, total height: 870 mm, nominal voltage: 400 V, Equipment: type plate available, Cryogenic freezer. Concept Deep-freezing is a process step in the hardening of metals that is used in particular for the production of mechanical components such as injection pumps, gear wheels and gear components. This process converts retained austenite into martensite. This ensures that the technical specifications are met and at the same time increases the dimensional stability of each component. The deep-freezing equipment ensures high temperature uniformity thanks to an improved design and optimized nitrogen consumption through the installation of high-quality insulation. The temperature-time profiles for all systems are set to your requirements and can be saved for high reproducibility. Areas of application Deep-freezing is used for hardening metal parts in various industries, for example - Aviation - automotive - Toolmaking - Mechanical engineering Cryogenic treatment is a thermal process that affects the volume of the entire material. It is therefore not just a surface treatment. The materials to be treated are placed in a super-insulated deep-freeze chamber and cooled to -180°C with the aid of nitrogen. HOW EXACTLY DOES THIS PROCESS WORK? The materials are cooled very slowly. At 1 to 2°K/min, we approach the temperature that results from the conversion of liquid nitrogen into gaseous nitrogen (-196°C!). We take great care to ensure that the materials in the chamber do not come into contact with the liquid nitrogen. This prevents thermal shock. The slow cooling process ensures that the entire material is cooled through. Heating is just as slow - at 1 to 2°K/min we bring the instruments to +35°C, i.e. higher than room temperature. This prevents condensation from forming and the materials can be removed from the system after approx. 15 hours. WHAT HAPPENS DURING CRYOGENIC TREATMENT? Similar to stress relief annealing, low-temperature treatment reduces internal material stresses. The structure of the steel is changed and residual austenite is converted into martensite. One can also speak of artificial ageing of the material. Wood also ages during this process and acquires a structure that corresponds to that of 150-year-old (!) wood. The resin deposits are hardened and reduced, creating a cavity that causes the change in sound. There are many physical and chemical processes involved and I will only describe the points that are relevant to musicians here. REDUCTION OF RESIDUAL STRESS IN THE COMPONENT: Cryo treatment causes a reduction of residual stress in the component: cryogenic temperatures (down to -196°C) achieve a complete "molecular" transformation of the partly heterogeneous microstructure in the component to a homogeneous and thus more uniform lattice structure in the alloys.The vibration properties are harmonized and bad overtones are minimized. IMPROVEMENT OF THE SURFACE QUALITY: The carbides created by the deep-freezing process ensure better coefficients of friction and low wear of the metal parts, particularly on the surface. The tensile strength of metals is increased and wear resistance to abrasion is improved. Dolstudy Hsq Rgr Tjcg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,180 h, Functionality: fully functional, cooling capacity: 249 kW (338.55 HP), Cooling cap.249 KW (73 refr.tons), 1 circuit with 1 screw compressors, with VSD drive with Plate evaporator, R 134A Colling down to -10C° water/glycol out. with integr. pump Dcslq Rjvfcqqsgr Tsg built in Container frame ready for operation

Condition: ready for operation (used), Year of construction: 1989, Immediately free from education center : Universal Milling Machine Horizontal - Vertical WMW Auerbach Delq Rgrouw Rppj Tocg Type FW 250 x 1000 / 2 Year of construction 1989 Table 1250 x 250 mm Table load 1250 kg Travel X/ Y/ Z 700 / 400 / 500 mm Heidenhain 3 axes digital readout SK 40 Spindle speeds 55 - 2800 rpm Feed rates 10 - 630 mm / min stepless Vertical head Horizontal milling device Drive 6,3 kw Weight 2.5 to At a price of Euro 3,000 plus VAT ex location

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, working width: 2,500 mm, material thickness: 16 mm, material width: 2,500 mm, Boxmaker SRE max 250 with Eco Feeder (year of manufacture 2012/2015) Sheet size max. 2,500 x 6,000 mm Sheet size min. 360 x 1,200 mm Material thickness 2.5 to 16 mm (triple shaft) Scissor lift with control 2,400 x 4,000 mm Large selection of tools Djlqjrwi N As Rgr Tecg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 14,354 h, Functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,170 mm, number of slots in tool magazine: 84, swivel angle B-axis (max.): 210 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Swing diameter over bed: 550 mm Swing diameter over cross slide: 530 mm Control system: OKUMA OSP-U100L Travel distance - x1: 475 mm Travel distance - x2: 160 mm Travel path - z1: 1,170 mm Travel distance - z2: 1,155 mm Travel path - y: 160 mm C-axis: 360° B-axis: 210° Number of positions in the tool changer: 84 Number of holders in the turret head: 12 MACHINE DETAILS Dimensions: 4,320 x 2,645 x 2,900 mm Machine weight: 12,500 kg Delq Rgrsuf Tlgj Tecg Spindle hours: 14,354 h Switch-on time: 70,794 h EQUIPMENT - with palletizing system and robot handling

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, injection pressure: 2.387 bar, overall weight: 15,000 kg, TECHNICAL DETAILS Closing side Drive type: fully electric Closing type: Fully hydraulic Construction: four-bar Closing force: 2,500 kN Panel size (h x v): 995 mm x 1,050 mm Beam dimensions (h x v): 630 mm x 630 mm Installation height: min. 330 mm, max. 0 mm Opening travel: 820 mm Plate distance: max. 1,150 mm Rotary table size D: 0 mm Ejector stroke: 200 mm Ejector force: 58 kN Centering D moving platen: 160 mm Centering D fixed platen: 160 mm Threaded hole for clamping platens: M20 Mold weight: 3,430 kg Dimensions (LxWxH): 6.50 m x 2.20 m x 2.30 m Total weight: 15,000 kg Spray side Screw diameter: 55 mm Stroke volume: 570 cm³ Injection pressure: 2,387 bar L/D ratio: 22 Screw geometry: 9 L/D Djlq Rgou R Nuwjr Tjcg Screw diameter: 55 mm Screw speed: 260 1/min Screw torque: 82.4 Nm Plasticizing flow: 49 g/s PS Injection flow into the atmosphere: 126 cm³/s Number of heating zones: 6 Nozzle contact force: 60 kN Nozzle travel: 82.4 mm Pump drive power: 45 kW Heating power: 23 kW Voltage: 400 V / 50 Hz Oil tank capacity: 720 l EQUIPMENT 2x temperature control point for hot runner On-screen text in German CEE socket 16A Pressure accumulator for increased injection performance Ejector or core pull parallel Core pull hydraulic 1x Air valve 4x Machine with material straightener Machine with water battery Leveling elements EUROMAP 12 interface EUROMAP 67 interface USB interface Schuko socket 10A Low-wear plasticizing unit

Year of construction: 2014, Condition: excellent (used), From operation resolution: MIgatronic PI 250 DC Year of manufacture 2014 Pulse function HF ignition Water cooling without function Welding range: 5-250Ampere 250Ampere at 30% ED 180A at 60% ED 150A at 100% ED Delq Rgem Tit Njr Tecg 220 Volt with 8meter torch(sheath partly damaged), ground cable and pressure reducer dimensions in mm approx. 1100x630x720 --Very well maintained unit-

Condition: used, Year of construction: 1995, Functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. Dolq Rgoup Skwer Tscg possible. Quill diameter: 30 mm

Condition: used, Year of construction: 2018, operating hours: 1,583 h, load capacity: 2,500 kg, drive type: Elektro, Low lift truck Load center: 600 Technical condition: very good Battery Volt: 252V Battery year: 24 Battery condition: 80 - 100% Djlsu D Sv Deq Rgr Tecg Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Viewing possible by arrangement. Our general terms and conditions apply. Lifting height for pallet handler, adjustable tiller head, fixed side guards, transistor control 12.5 km/h, creep speed, power-assisted steering, pin code, load guard, E-bar, writing console, small item holder, tandem Vulkollan fork rollers, friction drive wheel, Vulkollan jockey wheel, medium battery compartment

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, ram stroke: 600 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Djlq Rottriajgr Tocg

Year of construction: 2025, Condition: new, Universal grapple polyp for iron, stones and other materials Number of shovels: 6 pcs Volume of closed polyp: 250 l Mass: 285 kg Allowed load: 1000 kg Drive system: hydraulic Djlq Rgrjgz Hv Ne Tecg The polyp grabber with six shovels made of resistant materials is suitable for handling wood chips, waste, stone, iron and similar bulky materials. Two connections are required for polyp work: crane-rotator and rotator-polyp, and only one connection when turning by hand.

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 230958, ram adjustment: 110 mm, table width: 1,120 mm, table length: 805 mm, pressing force: 250 t, stroke distance: 140 mm, General condition: Used, good, fully functional Usage information: No dealers, machine ran on average less than 4 hours per day Delivery: the machine can also be dismantled and loaded - the additional costs are approx. € 1,450 Djljvb Up Doq Rgr Tscg TECHNICAL DETAILS Nominal forming force: 2,500 kN Clamping: 360 mm Stroke (changeable within the range): 30 - 140 mm Adjustability of the ram downwards: 110 mm Max. stroke rate: 45 rpm Usable stroke rate: 25 rpm Working path: 2.6 mm Clamping surfaces Clamping surface table: 1,120 x 805 mm Table top thickness: 110 mm Clamping surface ram: 800 x 475 mm Opening in the table top: ø320 mm Clamping opening in the Ram: ø410 x 560/320 mm Through hole in the table: ø65H7 / 105 mm Flywheel and motor Dimensions of the flywheel ring: ø1,300 x 280 mm Flywheel revolutions: 228/min Motor power: 22 kW Electric motor revolutions: 1,450 rpm MACHINE DETAILS Working voltage: 3 x 380 V Mains frequency: 50 Hz Compressed air connection: 0.4 – 0.6 MPa Air consumption per engagement of the clutch: 28 dm³ Machine dimensions (L x W x H): 2,660 x 1,350 x 2,975 mm Machine weight: 12,800 kg

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 250 x 250 mm or 300 x 300 mm, 15 plates, open spout, 20 mm cake thickness, pressure max. 10 bar, capacity 10 liters, filter surface 1.5 m², dimensions 1300 x 500 x 1300 mm, weight 300 kg, optionally with manual or motor hydraulics, with or without feed pump and piping Dcjlqofbbpwj Rgr Teg

Condition: used, Year of construction: 1992, Functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, ram stroke: 400 mm, die cushion stroke: 150 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm Dslq Rgsup Si Her Tecg ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Dolq Rgreia Rtdj Tscg Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, Year of construction: 2024, Capacity: 250 tons Workspace: 2500x550mm Stroke Length: 500mm Installation Height: 900mm Main Motor: 18,5kW Main Pump: 46 liters Forward Speed: 9,8mm/sec Return Speed: 16,5mm/sec Cylinder: 340mm Piston: 220mm Total Weight: 4500kg - Foot Pedal Dcelq Rettrkfogr Teg Linear Scale Speed Adjustment Pressure Adjustment Hydraulic Movable Table Rack and Pinion Moving Cylinder Digital Display Remote control (with cable) - 24/7 Before & After Sales Support - from manufacturer to customer

Year of construction: 2012, Condition: as good as new (ex-display), 2nd hand Fill and seal machine, VI-500 - Format : True Quad (Stabilo) bag wide, 200 mm breit x 100 deep, Dcjlqjff Hucs Rgr Tog the machine was never in use in consequence the machine has zero working hours Also for sale: fill and seal machine - VI-250 - Format : 50 mm wide

Condition: used, static maximum load 8,000 kg diameter 260 mm height 60 mm thread M 27 x 2 levelling height 25 mm weight 8.6 kg - 20 units on stock - price per unit -   Dcjlq Rofii Dfogr Tog