Used Bens 100R for sale (1,857)

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale. Gbjlhccsz Ny Rkeqteu

Condition: ready for operation (used), Year of construction: 2004, operating hours: 14,000 h, pressing force: 87 t, stroke length: 445 mm, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V 850 S was manufactured in 2004. It features a press force of 850 kN and a maximum stroke of 445 mm. The machine is equipped with a 5-axis CNC backgauge system and hydraulic tool clamping for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V 850 S press brake we have for sale. Contact us for further details. - Open Height/Stroke Extension: +230 mm- Operating Pressure: Max. 300 bar- Backgauge: 5-axis CNC backgauge system- Upper Tool Clamping: Hydraulic- Lower Tool Clamping: Hydraulic- Angle Measurement: ACB (Automatically Controlled Bending) preparation- Safety Equipment: BendGuard safety device, CE mark- Support Arms: 2 pcs. support consoles / arms- Hydraulic Drive: 4-cylinder upper drive concept Y1/Y2, electro-hydraulic plunger drive with proportional valve technology- Deflection Compensation: Glass scale ram position measuring system with spring-back compensation- Lower Tool Displacement: Program-controlled shift (I-axis) for 2 positions- Additional Features: Oil cooler, network card, spherical suspension and tilting of the press beam, flat front cover- Electrical Specifications: 3x 400 V, 24.0 A, 50 Hz, 17.0 kVA connection power, 24 V= control voltage- Pneumatic Connection: 6 bar- Additional Accessories / Tooling: Tool cabinet (BR001) with various top and bottom press brake tooling segments (OW210/S H=240mm segmented, OW210/S H=240mm L=500mm, EV/S W6/84° R1.6, EV W10/84° R1.6, EV W16/84° R1.6) Technical Specification Bending Length 1250 mm Gslhsz R Apxjccqtsbu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm Gbjlhccqsz Im Raetou MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. Gbslhccjz Nhlisqtju - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1997, Well-maintained, used press brake by Jorns Type: Maxi Line 150 SM CNC400A 6 Gbelhccsz Ru Awoqtju Capacity: 6000 x 1.5 mm Jorns CNC 400A control system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. Gbelhsz Hcp Njccqtju - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Technical specifications according to available documentation. Subject to prior sale.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, PIPE BENDING MACHINE WITH ERCOLINA MANDREL, MODEL TOP 030, THREE-PHASE, WITH MANDREL + ERCOLINA AUTOMATIC LOADER, MODEL 030 A3 H76 Machine in like-new condition, CE certified Minimum outer diameter: 10 mm Maximum outer diameter: 76 mm Gbjlez Nf Dcehccqtou Maximum bending radius (CLR): 200 mm Minimum bending radius (CLR): 20 mm Maximum bending angle: 210° Installed power: 4.2 kW Tank capacity: 15 l hydraulic oil Noise level: 65 dB Dimensions (Length x Width x Height): 4000 x 950 x 1250 (3 m) Weight: 850 kg (3 m) FEATURES •FST closing system (Patented) with an auxiliary system for stabilizing the hydraulic pressure of the sliding carriage. •Display screen for digital visualization of the carriage’s forward movement (Y1 axis) and rotation (B axis). •External pressure gauges to facilitate system setup and closing pressure adjustment. •Variable bending speed up to 4 rpm. •3-meter mandrel bench. •Pneumatic spindle.

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Gbslhccqjz Ix Ukotju Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, operating hours: 15,034 h, machine/vehicle number: 1.500, roller (bottom) diameter: 220 mm, roller (top) diameter: 300 mm, working width: 3,000 mm, sheet thickness (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 8 mm Max. pre-bending thickness: 8 mm Max. working width: 3,000 mm Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 300 mm Diameter of lower rollers: 220 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 6 kW Operating hours: 15,034 h Gjlhccoz Niq Tsqtebu Dimensions & Weight Dimensions (L x W x H): 7,700 x 2,300 x 1,700 mm Unladen weight: 10,000 kg

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Maximum bending radius 200 mm Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, Golhccjz Rn Sroqtebu with setpoint/actual value display, automatic angle adjustment and memory function Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, bending force (max.): 42 t, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending force: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Ram stroke: 300 mm Ram width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions and weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Gelhsz Nipceccqtebu Unladen weight: 1,000 kg EQUIPMENT Documentation CE marking

Condition: like new (used), Year of construction: 2021, Hydraulic 4-roll bending machine Digital display of roll positions Capability to form cones Golez I D Agohccqtjbu Length: 3050 mm Diameter of upper rolls: 220 mm Diameter of side rolls: 180 mm Bending capacity: 7 to 8 mm with a minimum radius of 1000 mm Machine dimensions: 4700 x 1100 x 1330 mm Weight: 5700 kg Operating videos available upon request.

Condition: good (used), Machine number: 173111 Type / Model: D 17-1-1 Grinding wheels, left and right: 160 x 30 mm Gbjlhccoz R Anneqteu Support pads, left and right: 90 x 65 mm Surface area: 300 x 340 mm Dimensions of grinding stand: 500 x 400 x 1,100 mm Motor: 0.37 kW Speed: 2,800 rpm Accessories / Equipment: Condition: good Weight: kg Dimensions: 800 x 600 x 1,150 mm

Condition: good (used), mileage: 172,700 km, fuel type: diesel, Year of construction: 2001, Box van/Camper with rear liftgate, Euro 2, original, 173,000 km, 2001, valid inspection until 2-2026. Dimensions: L: 520cm, W: 240cm, H: 242cm. Comes from the second owner, in very unique and excellent condition! Very well-maintained TRUCK, box van with a 3500 kg payload capacity. Liftgate with a capacity of 1500 kg. Tare weight 4800 kg! Dutch registration. We have a continuous supply; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Golhccqsz Rvirotjbu Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2007, functionality: fully functional, Technical data of the VTC-100R: - Swing diameter 1,250 mm - Turning diameter 1,000 mm - Turning height 850 mm - Drive power 45/55 kW - Max. torque 582 kg/m - Rapid traverse rates (X/Z) 20 m/min - Max. workpiece weight 1,500 kg - Machine weight 23 t Gjlhcozmd Ucscqtjbu - Footprint 2,800 x 5,200 mm - Control system Fanuc 32i-TA (10.4" color LCD) - C-axis - 12-position Baruffaldi turret VDI60 - 6 positions for driven tools - Hydraulic chuck (32") with hard and soft jaws - Clamping cylinder - Hydraulic unit with draw tube - Coolant system - Work area protection - Telescopic guard X/Z - Foot switch for hydraulic chuck - Work area lighting - 3-color indicator light - Mounting elements - Chip air blow-out system - Tool holder VDI 60 - Complete documentation Options (included): - Chip conveyor - Automatic door - Customer macro B - Automatic workpiece measurement - Oil mist extraction - Tool setter - Coolant high-pressure system - POLO filter system, 20 bar - Chip conveyor incl. hoses

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Gelhcoz Ng Ayscqtsbu Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: good (used), Kolbus VDB Cover bender This machine is in very good condition and ready to use. Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Working width: 750 mm Power supply: 380V Weight: 150 kg Gbolhccqsz Rk Rdotsu

Condition: used, The robust Optimum B 23 Pro bench drill for drilling into wood, metal or other materials, featuring a quick-action chuck. Technical data: - Spindle mount: MK 2 Gjlhccszrytlsqtjbu - Rated power: 750 W // 400 V // 50 Hz

Condition: used, Year of construction: 2024, machine/vehicle number: 211-11-01-23-02, total width: 1,070 mm, total length: 2,470 mm, total height: 1,850 mm, This E-bike motor test bench, type G4, manufactured in 2024 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: E-bike motor test bench EMEC G4, manufactured in 2024 Test bench for e-bike drives with two test levels in an aluminum profile enclosure with safety doors, including a mounted control cabinet and temperature control unit. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G4 Year of manufacture: 2024 Electrical power: max. 16.6 kW Connection power: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2470 x 1070 x 1850 mm Weight: 1200 kg, permissible total weight: 1350 kg As far as can be seen (information without guarantee): Both test levels appear to be constructed identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff air cooling kit Second servo motor with gearbox and fan unit, design presumably Beckhoff AM8053 (nameplate not visible) 2 torque measuring shafts Test specimen mounting with ring holder on a carriage Linear guides with clamping levers for axial adjustment Heat exchanger behind the test specimen mounting Fan for test specimen cooling Connections for CAN, service, and auxiliary voltage (AUX) Additionally: Julabo 1200F refrigeration circulator with touch control unit Laboratory power supply EA-PS 9080-100 Control cabinet (as far as can be seen): Golhccjz Ngzcoqtebu Emergency stop, main switch, on/off button, front connections USB and RJ45, control cabinet fan Rollers and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition, as inspected, is decisive. Functionality not tested.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Gjlhccoz D Suvoqtobu Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: used, Year of construction: 2025, machine/vehicle number: 211-11-07-25-10, total width: 1,070 mm, total length: 2,500 mm, total height: 2,050 mm, This E-bike motor test bench, type G5, manufactured in 2025 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, and accessories." Further details: E-bike motor test bench EMEC G5, manufactured in 2025 Test bench for e-bike drives with two test levels (Rack 1 and Rack 2) in an aluminum profile enclosure with safety doors, including an attached control cabinet. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G5 Year of manufacture: 2025 Electrical power: max. 16.6 kW Electrical connection: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2500 x 1070 x 2050 mm Weight: 1150 kg, permissible total weight: 1300 kg As far as can be seen, the following components are installed (information without guarantee): Both test levels appear to be equipped identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff Air Cooling Kit AX2090 Beckhoff servo motor AM8053-0J1A-0000 (3.12 kW, 15.4 Nm, 2000 rpm) with gearbox and fan unit 2 torque measuring shafts Test specimen mount with protective bracket on a slide Linear guides with clamping levers for axial adjustment Fan for test specimen cooling Thermocouple connections (Type K) Connections for CAN, service, fan, and auxiliary voltage (AUX) Additionally: Laboratory power supply EA PS 10080-120 (0 to 80 V, 0 to 120 A) Control cabinet (as far as can be seen): Gbslhcoz Nd N Decqtju Emergency stop, main switch, on/off button, CAN connection per rack, front connections 2x USB, DisplayPort, and RJ45 Forklift pockets, rollers, and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition as inspected is the decisive factor. Functionality has not been tested. Software and operating computer are not part of the lot unless expressly stated.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Gbelhcjz I Tguocqtou Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Workbench Drilling Machine GUILLARDON GT 16 Cone: CM2 Spindle exit: 150 mm Rotation: from 150 to 3000 RPM Table size: 400 x 400 mm Rotation right / left Throat depth: 280 mm Spindle diameter: Ø 60 mm Gbslhccsz I Diaoqtju Column diameter: Ø 105 mm 2 speeds motor Speed variation by belt drive Non-functional electronic drive Manual Descent Maxi height mandrel/table: 450 mm Mini height mandrel/table: 150 mm Sold with the table Voltage: 380 V Width: 500 mm Depth: 900 mm Total height on the table in high position: 2100 mm Total height on the table in a low position: 1700 mm Weight: approx 350 kg

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Gbolhcjz Nd Iascqteu Safety switch Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: used, Year of construction: 2016, Trotec Speedy 100 R (30 Watt CO2) – Year of manufacture 2016 Gelozd Utdohccqtobu Offered for sale due to business closure. A reliable, professional Trotec Speedy 100 R with a 30W CeramiCore laser source. Ideal for engraving and cutting wood, acrylic, leather, and plastics. Condition: The machine starts up immediately, connects perfectly with JobControl, and engraves/cuts properly. Maintenance: The machine has been idle for some time and requires maintenance. The filters of the extraction system need to be replaced, and the axes/mirrors need to be realigned. The price has been adjusted accordingly. Operating hours: Due to a known display error (overflow bug) in JobControl, incorrect hours are currently being displayed. The official, encrypted Trotec Service Log file (9.1 MB) is available for serious buyers to demonstrate the machine's history. Specifications & Accessories: Working area: 610 x 305 mm Includes Trotec Atmos extraction system (filters need to be replaced) Includes all original cables Location: Riemst / Vroenhoven area (Belgium), close to the Dutch border (Maastricht). Sale conditions: Sold in its current condition ("as is, where is"). Assistance with loading is available. A very competitive fixed price for quick buyers.