Used Eumega Mdv-3 for sale (33,163)

Condition: used, Functionality: fully functional, mileage: 97,570 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,063 mm, overall weight: 2,290 kg, empty load weight: 1,650 kg, maximum load weight: 640 kg, first registration: 02/2019, next inspection (TÜV): 01/2027, emission class: euro6, color: white, driver cabin: other, number of seats: 3, number of previous owners: 1, machine/vehicle number: OE1199, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, sliding door, soot filter, summer tires, trailer coupling, winter tires, well maintained Ford Transit Connect 1.5 TDCi 1st hand = checkbook maintained last inspection carried out at 88849KM Low emission Euro 6 Diesel particulate filter Green environmental sticker air conditioning Heated windshield 3rd seats Sliding door on the right Summer tires on steel rims (tread not good) Winter tires on steel rims (profile ok) Trailer coupling Bluetooth hands-free system Eco-display for consumption-optimized driving (Eco-Coach) Hill start assistant (Hill Holder) 6-point airbags for driver and front passenger Multifunction steering wheel Cruise control Power steering Central locking with remote control Electric windows Electric exterior mirrors Partition wall with glazing Hinged doors with glazing Engine 1.5 liter - 74 kW EcoBlue TDCi KAT Wheelbase 3062 mm Payload 640 kg Unladen weight 1650 kg Bwjlrhstqdt Aopqwsl Gross vehicle weight 2290 kg We sell exclusively to our AGB.s and under exclusion of any warranty. Errors, changes and prior sale reserved We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. We will gladly accept your current used appliance/vehicle in payment. Sales to tradesmen and exporters are given priority, this applies to our entire vehicle stock. The above information is non-binding, subject to errors/changes and prior sale!

Year of construction: 2011, Condition: used, arm length 4000 mm total column height 3100 mmm Bwslevrk Ahorhpqwol weight max. in kg 125 kg swivelling range 270 Grad height over floor 3254 mm weight 945 kg ABUS SV pillar jib crane with chain storage and electric ABUS chain hoist, inspection book available. Crane is dismantled and ready for shipping - see last photo. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2007, operating hours: 7,574 h, General Data Machine weight 2450 kg Control Unit Brand HEIDENHAIN Model 530i Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Y-Axis Movement 250 mm Z-Axis Movement 147 mm Table Number of tslots 5 Tools Type of tool holder SK 32 Media Power consumption 16 kVA Bolrhpqov T D T Nswjwl Additional Equipment 3D probe on a cable Tool stand Instruction books This 3-axis FEHLMANN PICOMAX 55 CNC 2/3 was manufactured in 2007. A vertical machining centre, it offers robust construction and precision engineering for reliable performance. Ideal for detailed and complex machining tasks. Consider the opportunity to buy this FEHLMANN PICOMAX 55 CNC 2/3 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2018, Operational condition machine! Bwelrswcgd Uehpqwsl Total of 2 machines available 2014 and 2018 vintage. Ask for additional information!

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 28978, UP-STROKE SAW UNIT BASE.3 - new machine from IDE-stock programme - Extrusion height preset to 1,100 mm - External height adjustment with 4 threaded spindles Bwelrhpowcauaoqwel - Base frame 2.0 m long, welded tubular frame - Travelling saw sledge 500 mm * motorised via toothed belt - Saw blade drive 1.5 kW - Carbide saw blade Ø 400 mm, 120 teeth - Pneumatic saw stroke - Profile passage according to sawing diagram D-Base.3 - Down-holder bridge, limit switch protected - 2 connection pieces for dust extraction - Protective panelling with sliding door, limit switch protected * with inlet and outlet protection channel, 500 mm long - Profile guide rollers on infeed side, adjustable - control unit ME Control 20/4 * 7" touch display * 10 programmes * adjustable saw blade lifting height * tipping signal routed to terminals

Condition: used, overall weight: 35,000 kg, maximum load weight: 29,380 kg, axle configuration: 3 axles, loading space length: 9,600 mm, loading space width: 2,330 mm, loading space height: 2,200 mm, loading space volume: 50 m³, first registration: 02/2019, next inspection (TÜV): 04/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Aluminum box body, approx. 50 cubic meters, rear double-wing door with espagnolette lock/swing tailgate, automatic mechanical 4-hook locking system, 1 pair of additional tension locks, 2 grain pushers with covers, roll-up tarpaulin, loading gauge, ABS, EBS, SAF INTRA CD axle(s), aluminum rims, disc brakes, air suspension with lifting/lowering device, lift axle, LED side marker reflectors, aluminum drop legs, 2 storage boxes, switch for cargo area light, vehicle can be covered and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops! The vehicle can be covered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Bwolrjv Ri E Sehpqwel Please contact us!

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: Nord, NORDAC frequency converter -Type: SK 1900/3 -Power: 1.9 kVA -Input: 3ph 380/415V 50/60Hz Bwslrhjn Nzh Nopqwsl -Output: 3ph 0-380/415V 2-120Hz -Dimension: 250/205/H190 mm -Weight: 8.1 kg

Condition: new, overall weight: 2,000 kg, empty load weight: 360 kg, maximum load weight: 1,640 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, suspension: steel, tire size: 165R13C 96/94N, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Bolrou R D Skohpqwjwl

Condition: used, axle configuration: 3 axles, loading space length: 12,400 mm, loading space width: 2,480 mm, loading space height: 1,300 mm, first registration: 04/2000, suspension: air, color: red, tire size: 385/65R22,5, Year of construction: 2000, Equipment: ABS, = Additional Options and Accessories = - Central Lubrication = Remarks = Number of axles: 3, Payload: 34080 kg, Unladen weight: 8920 kg, Gross weight: 43000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Central lubrication, Suspension type: Full air, Color: Red, ABS, Axle type: SAF = Additional information = General information Cab: Day License plate: OG-91-GY Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire profile left: 9 mm; Tire profile right: 3 mm Axle 2: Tire profile left: 2 mm; Right tire tread: 2 mm Axle 3: Left tire tread: 7 mm; Right tire tread: 2 mm Dimensions Dimensions (L x W x H): 1260 x 255 x 270 cm Weights Unladen weight: 8,920 kg Payload: 34,080 kg GVW: 43,000 kg Functional Loading area height: 140 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services Bolrhpsv I Rcajqwowl • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Year of construction: 2019, Condition: ready for operation (used), General Data Machine weight 2500 kg This SUPFINA LCM 220/4-220/3 was manufactured in 2019. Ideal for precision surface grinding, this machine maintains robust functionality despite its previous usage. A great addition for those needing reliable grinding operations. Contact us for more information. Bwjljv Rhnfsrhpqwjl Application Types Grinding

Condition: excellent (used), first registration: 05/1990, Year of construction: 1990, Brand of the structure: arbau klaus gmbh Technical condition: very good Visual condition: very good Contact Sales for more information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. Bwjlrhpjvvhtxjqwjl MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, mileage: 402,417 km, power: 279 kW (379.33 HP), first registration: 08/2015, fuel type: diesel, color: orange, axle configuration: 6x2, tire size: 315/80/22,5, fuel: diesel, wheelbase: 5,220 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,420 mm, loading space length: 7,010 mm, loading space height: 720 mm, Year of construction: 2015, Equipment: air conditioning, crane, trailer coupling, Front axle: Tyre size: 315/80/22,5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80/22,5; Double wheels; Suspension: air suspension Belrhswalhaspqwswl Rear axle 2: Tyre size: 315/80,22,5; Suspension: air suspension Drive: Wheel Empty weight: 14.427 kg Carrying capacity: 11.573 kg GVW: 26.000 kg Mast: telescopic (3 parts) Make of bodywork: PALFINGER

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 contouring control. Excellent condition, CE-compliant! Technical specifications: >> Year of manufacture: 1997, machine number: 370206 >> Rotating-tilting table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg >> Speeds: 60 to 3700 rpm >> Feed range: up to 2000 mm/min. Rapid traverse X and Y axes up to 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Power consumption 8 kVA Accessories and equipment: Bwjlrhjv N Imxjpqwsl >> Heidenhain TNC 310 contouring control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions >> Fully protective cabin >> Electronic handwheel HR410 >> Counterholder >> Data interface >> Renishaw MP11 touch probe >> Coolant system About the machine: A Kunzmann WF7/3 tool milling machine is offered for sale. With a Heidenhain TNC 310 contouring control. This universal milling machine is in very good condition. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is very easy by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and try out the Kunzmann on-site with power on.

Condition: good (used), Year of construction: 1993, Functionality: fully functional, Technical data : Pressing force adjustable 10 - 100 kN throat depth 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm Total power 2.5 kW Bwelov Rlt Ejrhpqwol Weight approx. 2.5 tons Oil filling approx. 150 ltr. Space requirement W x D x H approx. 0.95 x 1.5 x 1.95 m . Equipment and scope of delivery : . Travel / pressure changeover Pressure control valve with display on pressure gauge Adjustable holding time documentation .

Condition: used, mileage: 258,039 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 01/2011, next inspection (TÜV): 03/2027, emission class: euro4, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * 2nd hand * Air conditioning * TÜV (German Technical Inspection) until 2027/3 * Roof rack Bjlrhjwauwkepqwswl * Tool racks are not included! Special equipment: Load compartment partition, radio preparation, 4 speakers, Cab seats: Double passenger seat (including automatic seat belt), Power outlet in the cargo/passenger compartment Additional equipment: Driver's side airbag, Anti-Slip Regulation (ASR), Wide-angle exterior mirrors, Colored turn signals integrated into the exterior mirrors, Rear wing doors without glass, Body/structure: Van, Fuel tank: 90 liters, Height-adjustable steering column (steering wheel), Engine: 2.2 liters - 74 kW HDi CAT, Wheelbase: 3000 mm, Sliding door in the cargo/passenger compartment on the right, Seat cover/upholstery: Fabric, Dyed bumpers

Year of construction: 1959, Condition: ready for operation (used), Turning diameter: 1500mm, turning length: 2000mm, a Siemens panel control was installed in 2018. An on-site inspection is possible. Bolrhjwa Tkispqwowl

Condition: used, Year of construction: 1992, Functionality: fully functional, drilling capacity: 40 mm, spindle stroke: 300 mm, number of spindles: 3, Drilling machine for steel structures - drilling holes in steel profiles. manufacturer - PEDDINGHAUS Germany; type - TDK 1000/3; year of manufacture - 1992; number of drilling spindles - 3 pcs. (two horizontal and one vertical); drilling diameter in S355 steel - from 8 to 40 mm; type of drills - HSS high-speed steel; drill mounting in the spindle - Morse taper 4; drill cooling - through the spindle and channels inside the drill; spindle feed - hydraulic with pressure force adjustment; spindle extension - max. 300 mm; material feed and length measurement - roller; Bwelrhepl Dycopqwsl CNC control - SIEMENS Sinumerik 840; software - CIM Steel; Production capabilities: •drilling INP I-beams: 80-600 mm, IPE: 80-600 mm, IPB: 100-1,000 mm, IPBL: 100-1,000 mm, IPBV: 100-1,000 mm; •drilling UWP channels: 50 x 25 - 400 mm; •drilling equal-sided angles: 80 x 8 mm - 200 x 24 mm; •drilling unequal-sided angles: 80 x 65 x 8 mm - 250 x 90 x 16 mm; •drilling flat bars: min. 15 mm; power consumption - 35 kW; original paint - the machine has not been painted; weight - 9,000 kg; CE - does not have; The machine is connected to the power supply, ready for testing.

Condition: used, mileage: 262,679 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,250 mm, overall weight: 3,200 kg, first registration: 10/2014, emission class: euro5, color: white, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, onboard computer, Power/Engine : 2.143 cm³, with turbocharger Axles : 4x2 Brakes : ASR, Disc brakes Cab : Power windows, Power mirrors, Exterior temperature display, Audio System JVC Radio Exterior mirrors, Exterior temperature display, Audio system JVC Radio Refrigerated body : Cold Car, Bunker doors/ice, 3 doors left, No. of doors right 3 doors, Fixed partition Refrigeration unit : Cold Car, Eutectic storage cooling, Cooling down to -33 °C Other equipment : Power steering, Immobilizer ID: 118000 Wheelbase 3250 mm Cold Car refrigerated body, bunker doors/ice, 3 doors left, 3 doors right Engine version Euro 5b+ Wheelbase 3250 mm Stabilizer front axle Steering wheel tilt and height adjustable Hill-start assist Electrical system for trailer socket Lockable glove compartment Electronic Stability Program (ESP9i) 6-speed manual gearbox ECO Gear sealing Speedometer drive TEMPOMAT Heated and electrically adjustable exterior mirrors Crosswind assistant Gearshift indicator Service interval indicator ASSYST Particle sensor Fuel pump, Electric, regulated Adaptive brake light Daytime running light Engine OM 651 DE 22 LA 70 kW (95 hp) 3800/min Seat belt warning system for driver's seat Storage above windscreen Armrest for driver's seat Airbag driver's seat Comfort Passenger seat Comfort Fabric Tunja black Radio Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power supply (380V) overnight. The solidification point of the eutectic solution is -33°C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used cooling and ice cooling vehicles in stock. You can find more from our range under Non-binding offer, sale only to traders, subject to errors and prior sale Bwjlrhet Nbgzjpqwel

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 contouring control. Excellent condition, CE-compliant! Technical specifications: >> Year of manufacture: 2005, machine number: 370552 >> Milling table clamping area: 800 x 425 mm Bwolrev Nh A Tohpqwel Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg >> Speeds up to 4500 rpm >> Feed range up to 2000 mm/min Rapid traverse up to 5000 mm/min >> Travels X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 310 contouring control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating manual >> Fully protective cabin >> Coolant system About the machine: Offered is a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 contouring control. This universal milling machine is in very good condition. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping, vertical and horizontal. Converting from vertical to horizontal is very easy, simply by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power.

Condition: good (used), axle configuration: 3 axles, first registration: 08/2009, suspension: air, tire size: 385/65 R22,5, Year of construction: 2009, Axle configuration Tyre size: 385/65 R22,5 Make axles: Anders krone Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 11.260 kg Carrying capacity: 29.740 kg GVW: 41.000 kg Maintenance, history and condition Number of owners: 1 Technical condition: average Visual appearance: good Bjlrjv Uyvpohpqwswl

Condition: used, Year of construction: 2007, volumn 3 x 16 Liter control Siemens S7-300 turning speeds 481 U/min charge load 1 kg workpiece weight 15 g dimension of workpiece 30 x 30 max. mm machining nass, nass, trocken total power requirement 400 V Bslrhjv I Er Aopqwewl weight of the machine ca. 300 kg dimensions of the machine ca. 2,5 x 1 x 1,5 m Disc finishing machine Mulktifinish MF 16/3, year of manufacture 2007 We are selling 2 identical disc finishing machines. In the drum of the centrifugal machine, the grinding elements move toroidally under the influence of the activator, while the workpieces are placed freely in the grinding mass and perform complex rotary movements in it during the process. The numerous contacts of the grinding elements with the surface of the workpieces at high angular speeds lead to deburring, grinding or polishing of the workpieces.

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Empty weight: 8.400 kg Carrying capacity: 26.600 kg GVW: 35.000 kg Tipper: Back Kempf SKM 35/3. Year: 2014. 8 tons BPW axles. Weight: 8400 kg. Load capacity: 26.600 kg. Max weight: 35.000 kg. Kingpin load: 11.000 kg. ABS EBS ALB. 1st axle liftaxle. Airsuspension. Alcoa. Dimmensions inside kipper: L: 11.250 mm. W: 2350 mm. Bwolrov Upnhshpqwel H: 2500 mm. Kingpin height: 1200 mm. Tyres: 385/65R22,5 60%. German Trailer! ID NR: 416. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, mileage: 219,486 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,250 mm, overall weight: 3,200 kg, first registration: 11/2014, emission class: euro5, color: white, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, onboard computer, Power/Engine: 2,143 cm³, with turbocharger Axles: 4x2 Brakes: ASR, disc brakes Driver's cab: Electric windows, electric. Outside mirrors, outside temperature display, JVC audio system, radio, cooling structure: Cold Car, bunker doors/ice, 3 doors on the left, number of doors on the right 3 doors, fixed partition wall, cooling unit: Cold Car, eutectic storage cooling, cooling down to -33 °C, other equipment: power steering, immobilizer ID: 117871, ice cooling structure, electronic stability program (ESP9i), front axle stabilizer, no vehicle lowering, hill start assist, battery management, radio, heated and electrically adjustable outside mirrors, storage above the windshield, 6-speed manual transmission, ECO Gear 360, wheelbase 3250 mm, 3.5 ton vehicle, belt warning device for driver's seat, crosswind assist, shift point indicator, service interval indicator ASSYST, adaptive brake light, daytime running light, generator management plus, cruise control, driver airbag, smoker's package, hydraulics - car jack, video link on YouTube: plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The freezing point of the eutectic solution is -33 ° C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used refrigerated and ice-cooled vehicles in stock. You can find more of our range under Non-binding offer, sale only to traders, errors and prior sale reserved. Advertisements and company logos on vehicles may have been digitally edited in photos Bolrov A Azdjhpqwewl

Condition: used, mileage: 203,768 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,250 mm, overall weight: 3,200 kg, first registration: 10/2014, emission class: euro5, color: white, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, onboard computer, Power/Engine: 2,143 cm³, with turbocharger Axles: 4x2 Brakes: ASR, disc brakes Driver's cab: Electric windows, El. Outside mirrors, outside temperature display, JVC audio system, radio, cooling structure: Cold Car, bunker doors/ice, 3 doors on the left, number of doors on the right 3 doors, fixed partition wall, cooling unit: Cold Car, eutectic storage cooling, cooling down to -33 °C, other equipment: power steering, immobilizer ID: 117897 Ice cooling structure Electronic stability program (ESP9i) Front axle stabilizer No vehicle lowering Hill start assist Battery management Radio Heated and electrically adjustable outside mirrors Storage above the windshield 6-speed manual transmission ECO Gear 360 Wheelbase 3250 mm 3.5 tonne Seat belt warning device for driver's seat Crosswind assist Shift point indicator Service interval indicator ASSYST Adaptive brake light Daytime running lights Generator management Plus CRUISE CONTROL Driver airbag Smoker's package Hydraulics - car jack Video link on YouTube: Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The freezing point of the eutectic solution is -33 ° C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used refrigerated and ice-cooled vehicles in stock. You can find more of our range under Non-binding offer, sale only to traders, errors and prior sale reserved. Advertisements and company logos on vehicles may have been digitally edited in photos Bolrjvya Dkohpqwowl

Condition: used, mileage: 213,906 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 3,250 mm, overall weight: 3,200 kg, first registration: 11/2014, emission class: euro5, color: white, driver cabin: day cab, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, onboard computer, Power/Engine : 2.143 cm³, with turbocharger Axles : 4x2 Brakes : ASR, Disc brakes Cab : Power windows, Power mirrors, Exterior temperature display, Audio System JVC Radio Outside mirrors, Outside temperature display, Audio system JVC Radio Refrigerated body : Cold Car, Bunker doors/ice, 3 doors left, No. of doors right 3 doors, Fixed partition Refrigeration unit : Cold Car, Eutectic storage cooling, Cooling down to -33 °C Other equipment : Power steering, Immobilizer ID: 117790 Wheelbase 3250 mm Ice-cooling body Cold Car, bunker doors/ice, 3 doors left, 3 doors right Engine version Euro 5b+ Wheelbase 3250 mm Stabilizer front axle Steering wheel adjustable for tilt and height Hill start assist Electric trailer socket Lockable glove compartment Electronic Stability Program (ESP9i) 6-speed manual gearbox ECO Gear sealed speedometer drive TEMPOMAT heated and electrically adjustable exterior mirrors Crosswind assistant Gearshift indicator Service interval indicator ASSYST Particle sensor Fuel pump, Electric, regulated Adaptive brake light Daytime running light Engine OM 651 DE 22 LA 70 kW (95 hp) 3800/min Seat belt warning system for driver's seat Storage above windscreen Armrest for driver's seat Airbag driver's seat Comfort Passenger seat Comfort Fabric Tunja black Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power supply (380V) overnight. The solidification point of the eutectic solution is -33°C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used cooling and ice cooling vehicles in stock. You can find more from our range under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Bolrhjnmxl Tspqwowl