Used Valtra/Valmet 700 for sale (13,425)

Condition: used, sheet thickness - max. - mm Dcjlq Tgeu Ahquj E Tjg Roller stands - Profile height max. - mm total power requirement - kW weight of the machine ca. - t dimensions of the machine ca. - m Package 4 x seam former - 1 x RAS 700 M - 2 x OTTO SOHN - 1 x unknown

Year of construction: 2016, Condition: good (used), Motor: 400 V / 4.0 kW / 50 Hz Compressor speed: 940 rpm Suction capacity: 700 l/min Dcelq Tjl Ex S Eeg E Tjg delivery rate: 570 l/min max. pressure: 10 bar compressed air tank: 270 l, vertical galvanized weight: approx. 270 kg dimensions: 964 x 795 x 1912 mm (LxWxH) Cylinders/stages: 2/2 Sound level: 68 dB(A) Equipment: - Fully galvanized air receiver, manufactured according to AD2000 guidelines, with hand hole for easy inspections. - Low running 4.0 kW unit with German quality motor. - Condor pressure switch with hour meter - easy to read pressure gauge - very stable belt guard - double vibration damping between air reservoir and base plate and between air reservoir feet and base for effective reduction of unwanted vibrations.

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 20559 - 09242, pressure: 700 bar, TECHNICAL DETAILS Max. pressure range: up to 700 bar Dosing volume: 4 x 2,000 cm³ Dcjlq Tgovur A Io E Tsg Cylinder types: single-acting Number of cylinders: 4 Tank volume: 20.0 l Motor: electric motor, 230 V, 50 Hz, IP55 Power: 2.2 kW MACHINE DETAILS Dimensions (W x D x H): 102 x 84 x 96 cm Weight: 650 kg

Condition: refurbished (used), Year of construction: 2006, Fully automatic flow-wrapping machine for packaging products - regardless of their length - in full wrap full wrap and without film overlap. The product is fed in via a conveyor belt with simultaneous simultaneously wrapped in a semi-tubular film via a forming shoulder. The product is clocked in via a light barrier. The infeed belt can be easily adjusted to different product widths. The longitudinal seal is produced by a continuous side sealing device. The height of the The height of the forming shoulder and welding devices can be adjusted manually. Wear parts and defective parts have been replaced. The machine was technically inspected at Kallfass and is fully functional. Delq Tg Eeufh Ams Tjcg Technical data Cross sealing stamp: 750 mm Film: semi-tubular film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Min. product width: 80 mm Passage height: 300 mm Working height: 780 - 930 mm Power connection: 400 Volt three-phase current, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Tunnel opening width: 650 mm Tunnel outlet height: 200 mm Viewings and demonstrations are possible on our premises by prior arrangement. Functional guarantee, no warranty

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Dcjlqouqc Ngs Tg E Tog Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Condition: used, Year of construction: 2002, SECOND-HAND RADIAL ARM SAW OMGA MOD. RN700 - CE RULES - Kw 2.9 - Blade d. 300 mm. - Volt. 400/50 - Year 2002 Djlsrm Stqoq Tg E Tecg

Condition: used, sheet thickness - max. 1 mm Roller stands 1 working lenght 1020 mm total power requirement 0,75 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 2*,8*1,5 m No. 5129: Tube seaming machine / Seam closer Dslottabkjq Tg E Tjcg RAS, type 700 M Working width: 1020 x 1 mm Drive power: 0,75 kW

Condition: excellent (used), Working width 100cm Working length 270 cm Dolq Tg Eovunz Hj Tecg 4kW motor

Condition: good (used), Year of construction: 2018, DMG Mori CTX 2500 - 700, Year of manufacture 2018, Control Celos Siemens 840 D sl Operate, Center distance 705 mm, Bar machining up to 75 mm, Y axis +/- 50 mm, 12-way turret - all stations driven, VDI 40 mount, C axis main spindle, Dolqsvpgp Ej Tg E Tocg Spindle speed up to 4,000 rpm, Chip conveyor, Bar machining package 77 mm, Oil mist separator, Accessories, Machine on 14,200 hours, Spindle on 3,200 hours,

Condition: used, Year of construction: 2020, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: 110, The single-shaft machine Triumph B700 (45 kW) / multi-blade circular saw BUK-700 is designed for the production of cut-to-size lumber (boards, beams, slats and others) from round timber (logs) with a height of up to 160 mm. The multi-blade circular saw BUK-700 is characterized by high productivity and allows the production of export-quality lumber. The necessary distance between the circular saws is set by special spacer sleeves (spacers). The BUK-700 machine is equipped with a double-sided claw cover, which includes upper and lower claw aprons. The log is transported by driven roller drums, which ensure high precision in moving the workpiece and straight movement. Power of the main engine: 45 kW. The speed of displacement is continuously adjustable by a frequency converter. There is a heater for the electrical equipment. The saw shaft is driven by a 45 kW electric motor (a 55 kW version is also available) with a speed of 3000 rpm via a V-belt drive. This significantly reduces the vibrations transmitted from the running motor to the saw shaft and extends the service life of the shaft bearings. It also helps to improve the surface quality of the processed material. The mounting diameter of the circular saws is 75 mm (with two groove fields for keys). The use of a single saw blade allows sawing beams up to 160 mm thick with small saw blade diameters and a small cutting thickness, which significantly increases the yield of sawn timber. Technical data of the BUK-700 multi-blade circular saw: | Diameter of the saw blades, mm: 450 | Diameter of the saw shaft, mm: 75 | Max. number of saw blades in the saw block, pcs: 8 | Width of the saw block, mm: 700 | Max. cross-section of the round timber, WxH, mm: 750 x 160 | Min. length of the round timber, mm: 1200 | Supply voltage, V: 380 | Power of the main electric motor, kW: 45 (55*) | Speed of the saw, rpm: 3000 | Drive of the longitudinal feed, type: frequency converter, adjustable | Power of the feed motor, kW: 2.2 | Speed of the longitudinal displacement, m/min: 0–14 (calculated) Dimensions: | Length, mm: 2500 | Width, mm: 1410 | Height, mm: 1500 | Weight, kg: 1500 Scope of delivery: Dcjlq Tsvr Dw Eeg E Teg - Saw block complete with 45 kW motor. - Spacers for the required size of the finished sawn timber - Machine documentation and operating instructions. -two packs of 28 circular saw blades (300mm) -grinding machines for circular saw blades (photo on request) in perfect condition

Condition: used, Year of construction: 2005, Power (KVA): 636 Working hours: 2633 Delqou Iv Apj Tg E Tscg

Condition: used, axle configuration: 2 axles, first registration: 08/2002, color: other, Year of construction: 2002, Empty weight: 3.120 kg Dolq Tg Eoufwyno Tjcg Axle 1: left 6 mm right 6 mm Axle 2: left 10 mm right 6 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: defective spare-parts repository (used), Year of construction: 1986, x-travel 410 mm y-travel 310 mm Delq Tgeunulbs E Tecg z-travel 400 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 2*2*2 m Universal tool milling machine HERMLE UWF 700 Spindle holder SK 40 Speed range 40-2000 min Space requirement approx. 2 x 2 x 2 m Weight approx. 1100 kg For further data see attached PDF Rigid table 700 x 285 Horizontal milling machine vertical - milling head enclosed - partially rep. conditioned Documentation Working area: approx. 410 x 310 x 400 Drive: 2,2 Heidenhain digital display

Condition: excellent (used), Arbeitsbreite 100cm Arbeitslänge 270 cm 4kW-Motor Dcslovtbb Rsq Tg E Tog

Condition: as good as new (ex-display), Functionality: fully functional, We have three boxes in stock, price is for one box only. Dcoljvv Id Doq Tg E Tsg Brand new never used. Exp. 2026-03-17 Please check out our other listings as well.

Condition: used, Year of construction: 1987, / year of construction: 1987 Dcelq Tgof H H U Eo E Tog

Year of construction: 1999, Condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 year 1999 Screw diameter 55 mm In top condition, still in operation Dcjlq Tsh S Dncjg E Tog

Condition: ready for operation (used), 6230 - ITALPRESS Bandsaw - Motor Power: 3 kW - Table Length: 103 cm - Table Width: 71 cm - Maximum Cutting Height: 3200 mm Dcelq Tgsu Up S Uj E Tsg - Maximum Cutting Width: 6700 mm - Wheel Diameter: 700 mm - Manual Brake - Maximum Blade Length: 5020 mm - Minimum Blade Length: 4920 mm - Star-Delta Start - Manually Adjustable Fence - Voltage: 380 V - Dimensions: Width 1400 mm, Length 800 mm, Height 2200 mm

Condition: used, Year of construction: 1977, x-travel 500 mm y-travel 400 mm z-travel 400 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5*2,5*2 m No. 4030 Universal milling machine - not functional - to be used as spare part - Weight aprrox. 1800 kg Rigid table 800 x 400 mm3 separate feed motorsVertical milling head with quill feedSpeed range 40 - 2000 min-1 Delqotqp U Rj Tg E Tocg Working area: 500 x 400 x 400

Condition: new, - Capacity 700 x 4 mm Oxbmp - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical roller - Rotating upper roller - Brake motor Djlq Tgoh Rbvgj E Tscg - Foot switch - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 mm throat 345 mm bore stroke 200 mm taper MK 4 MK table-size 715 x 515 mm Dcelovblihsq Tg E Teg feeds 0,09 - 0,16 - 0,28 mm/U turning speeds 30 - 1200 U/min total power requirement 1,5 KW weight of the machine ca. 0,8 t dimensions 1,2 x 0,8 x 2,15 m Automatic feed Spindle speeds continuously adjustable Thread cutting device Emergency stop device Coolant system

Condition: used, Year of construction: 2019, / Year of construction: 2019 / Power of main machine: 2.2 kw / Power of air pump: 2.2 kw / Working speed: 10000-21000 pcs/h / Standardization of paper: 160X150-650X1700 mm / Thickness of film: 0.03-0.25 mm / Weight of whole machine: 2700 kg / Size of appearance: 6300X1400X1700 mm / Weight of paper: 250-1000 g/m2 Dcjlqshpqqfj Tg E Tjg

Condition: good (used), Year of construction: 2004, Functionality: fully functional, We offer a Clipper compressed air clipper Poly-Clip SCD 700 year 2004 in a fully functional condition. Workshop checked. Further information on request. Dcjlq Tgsu Iv E Dj E Tjg Cash payment or prepayment. Sale only to traders, no guarantee, no warranty.

Year of construction: 1984, Condition: good (used), x-way 375 mm automatic y-way 275 mm automatic z-travel 340 mm automatic taper of the main spindle SK 40 table clamping surface 700 x 285 mm speed 40 - 2800 rpm quill stroke 63 mm total power requirement 2,2 kW Machine weight approx. 1500 kg space requirement approx. 2,4 x 2,6 x 1,7 m Dcslqokvmdie Tg E Tjg Voltage 400 V 3-axis digital display Heidenhain Fixed angle table Coolant device Vertical milling head swiveling

Condition: good (used), x-way 410 mm y-way 310 mm z-way 400 mm taper of the main spindle SK 40 table clamping surface 700 x 280 mm speed 45 - 2000 rpm quill stroke 63 mm total power requirement 2,2 kW Machine weight approx. 1300 kg space requirement approx. 2,1 x 2,1 x 1,7 m Voltage 400 V Dcolq Tgei Elyde E Tsg 3-axis digital display Heidenhain Fixed angle table Coolant device Vertical milling head swiveling