Used Valtra/Valmet 600 for sale (22,461)

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm control TNC 430 Heidenhain turning speed range - main spindle max. 10.000 min/-1 power capacity - main spindel 7 / 9 kW tool taper ISO 40 spindle bearing diameter 70 mm measuring system direct Resolution 0,001 mm table surface area Ø 280 mm max. table load 250 kg Swivel range +/- 110 ° rotatable 360 ° number of toolpositions 30 pos. max. tool diameter 80 (125) mm Dceb Hcjtqmqgov Taeg change-time chip to chip 5,5 sec rapid traverse ( X / Y / Z ) 35 / 35 / 35 m/min feed speeds 1 - 30.000 mm/min Feed force 6 kN total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5 x 3,5 x 2,8 m 5 Axis CNC - Machining Center Universal HERMLE - C 600 U

Condition: good (used), Complete feed of gang saw Esterer HDN 600 Deb Hcvsr Hmhne Taocg was recently removed due to conversion to frequency-controlled feed. immediately available Location: Austria, near Wels

Condition: used, Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,700 mm, spindle speed (max.): 20,000 rpm, space requirement length: 4,400 mm, space requirement width: 3,400 mm, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 600 mm .. Y-axis travel: 450 mm .. Z-axis travel: 450 mm .. rotating range B-axis from: -115 ° .. rotating range B-axis up to: 30 ° .. rotating range C-axis from: 0 ° .. rotating range C-axis up to: 360 ° TABLE .. clamping surface diameter: 450 mm .. workpiece load (max): 200 kg SPINDLE / HEAD .. spindle revolutions (max): 20000 /min AXIS DRIVES .. rapid traverse X: 22000 mm/min TOOL MAGAZINE .. number of positions: 220 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4400 mm .. space requirements -front/back-: 3400 mm .. total height: 2700 mm ATTACHMENTS .. digital display: yes .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Dsb Hceurcghev Taecg Equipped with: - ATC 220 KSK-A63 - 7 compartment pallet changer system 3R - Tool magazine with 220 tool slots

Condition: used, Functionality: fully functional, Year of construction: 2016, operating hours: 2,710 h, load capacity: 5,000 kg, lifting height: 5,065 mm, fuel type: diesel, mast type: triplex, construction height: 2,676 mm, drive type: Diesel, Diesel forklift Load center: 600 Djb Hcvsu Adh Aj Taocg Mast type: Triplex Technical condition: good Sideshift, fork positioner,

Year of construction: 1964, Condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  Dcsb Hcvehtyuds Tasg This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Bosch NT 600 power supply, used, in good condition, 100% functional Dsb Hji D Uanscv Tajcg

Condition: excellent (used), Year of construction: 2019, Flex-trim SandPerfect 600 brush sander for sale Professional brush sander Flex-trim SandPerfect 600, suitable for sanding wooden surfaces, rounding parts and surface treatment. The ideal solution for furniture manufacturers, carpenters and other woodworking specialists. Technical data: 🔹Two cylinder diameters: 180 mm and 70 mm 🔹Sanding width: up to 600 mm Djbjv Upy Rs Hcv Tascg 🔹Adjustable speed for optimal adaptation to different materials 🔹Motor 1 x 0.75kW 🔹RPM 50 - 450rpm The machine is in good technical condition, ready to work!

Condition: used, Functionality: fully functional, Year of construction: 1993, operating hours: 17,407 h, load capacity: 4,500 kg, lifting height: 3,800 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, fork carriage width: 1,350 mm, drive type: Diesel, Diesel forklift Load center of gravity: 500 Djb Hcv Tsv Swt Heaecg Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Good Front tires type: Superelastic Rear tires type: Superelastic Road traffic regulations

Year of construction: 1979, Condition: good (used), main engine 7 kw lifting motor 1.1 kw planing width 600mm electric lifting rollers in the table top Dcob Hcvoil H R Ao Tasg

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 7,534 h, load capacity: 3,000 kg, lifting height: 3,695 mm, fuel type: electric, mast type: standard, construction height: 2,524 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Technical condition: good Push fork, sideshift, fork positioner, Djb Hcv Tou Ac Nlsaecg 3rd valve, 4th valve,

Year of construction: 2007, Condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle Deboh Agwrs Hcv Tascg 3D tracer Renishaw MARCELS MASCHINEN CH

Year of construction: 2008, Condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Status: very good condition Dcsb Hcjd Rafbsv Tasg Delivery time: from stock

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,000 h, Heidelberg Eurobind 600 Single-clamp binder Side gluing unit: EVA ref.001005 Cover pressing station Optical safety system in the infeed area Highly effective spine preparation Control of the gluing length Belt delivery Full Air filtration system Full Dust extraction Performance: ca. 600 cycles/h Number of clamps: 1 Block formats: - Block thickness: 2 - 50mm - Block width: 120-320mm - Block height: 120-440mm Dsb Hcowbt Ikjv Tajcg - Signature grammage: 60-170g/qm Cover formats: - Overall cover width: 242 - 710 mm - Cover height: 120 - 440 mm - Cover grammage: 120-300g/qm Spine preparation station: with full dust extraction Milling depth: 0- 3mm Horizontal Cover feeder: Pile height: max. 150mm Scoring: double or quadruple Distance between spine and ornamental scores: 6mm Power supply Europe: 400V, 50Hz, 3 Phasen N PE/18 (20A)/9,9kVA working pressure: 6bar Dimensions: 3100x2290x1325mm (LxBxH) Weight: ca. 1050kg

Condition: excellent (used), Year of construction: 2021, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, Machine from a vocational training center, DMG CMX 600 V DMG Gildemeister, Year of manufacture 2021, Heidenhain TNC 620 control, X/Y/Z travel 600/560/510 mm, 30-station spindle, SK 40, Spindle speed up to 12,000 rpm, Dcsb Hcv Tovpqppsaeg 3D measuring probe, 3,300 operating hours, 1,130 spindle hours

Condition: used, Year of construction: 1997, Technical specifications of horizontal automatic Press Model Konti 275 D Manufacturer: PAAL, Germany Press force: 75t Channel cross-section 75x110 cm. Feed opening 102x155 cm. Filling volume approx. 2.0 m3 Binding vertically 5 wires Drive power 45 kW Material throughput • Density 35 kg/m3 9.5 tonnes/hour. • Density 60 kg/m3 16.5 tonnes/hour. • Density 100 kg/m3 26 tonnes/hour. Bale weight from 500 to 750 kg. Adjustable bale length Dsb Hcv Tev Svkkeajcg Bale size (WxH) 75 x 1100 mm Press weight 25 tonnes Press dimensions see brochure Year of manufacture 1997. Operating hours, approx. 40,000 hours

Condition: used, Year of construction: 2002, Overview This Krones 600-15 labeling machine was manufactured in 2002 and is designed for labeling PET bottles (0.75L, 1L, 1.5L) with pre-cut labels and hot melt. The machine has 15 heads and achieves a maximum output of 15,300 bottles per hour. It is being sold as it is no longer used in the factory. Technical details Output: 15,300 bottles per hour Bottle formats: PET (0.75L, 1L, 1.5L) Labeling: Prefabricated labels with hot melt glue Number of heads: 15 Electrical specifications Nominal connected load: 11.2 kW Rated current: 17 A Max. permissible input fuse: 25 A Rated voltage: 220/380 V Control voltage: 24 V DC Rated frequency: 50 Hz Current class: 3 Dob Hcov Avxiev Taecg

Year of construction: 2017, Condition: excellent (used), overall dimensions 1635x770x1050/1350 mm; power supply 400 v, 50 Hz; power 4 kW; 2 chambers 600x500x160 mm each; Dob Hev Uadmocv Tajcg gas supply system; 4 sealing zones 600 mm each with cut-off; external vacuum pump Busch 160 m3/h; weight about 600 kg.

Condition: used, Manufacturer: LÖDIGE Scope of delivery: Control cabinet Siemens 11 kW motor + gearbox Dceb Hcot Uaznov Taeg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: GM3974/02-07, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840 C, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 630 mm Control: Siemens 840 C Spindle Spindle speed: max. 12,000 rpm Tool holder: HSK 80 Axes B-axis: 360 × 0.001° A-axis (tool carrier): +40 / -95° Tools & pallet system Number of tools in magazine: 61 Dcjb Hcv Tjv S Htijaeg Pallet size: 500 × 500 mm MACHINE DETAILS Space requirement: approx. 6,200 × 3,000 mm Machine weight: approx. 25,500 kg Electrical data Power supply: 3PH / AC 400 V 50 Hz Rated current: 102 A

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 600-1422, INCLUDED IN THE PRICE: COMPRESSOR JUN-AIR 6 25 KNIVES Deb Hsv Uyt Uecv Taocg

Condition: used, grinding diameter 250 mm grinding length 600 mm centre height 125 mm grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° longitudinal feed of the table 700 mm table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Überholt nach Kellenberger Richtlinie inklusive neuer, moderner sowie zukunftssicherer Steuerung. Foto von bereits gelieferter Maschine. -Die Bedienung über das Touch-Panel ist denkbar einfach. -Die Symbolik auf der Steuertafel ist praktisch identisch mit der ursprünglichen Steuerung somit entfällt die Einarbeitung. -Diagnosefunktion mit Anzeige von SPS Hinweisen und den digitalen I/O Dcjb Hjd Ih Ehecv Taog -Abrichtfunktion auf Kundenwunsch erweiterbar bzw. änderbar. -Auf Wunsch orientierter Spindelhalt der Werkstückspindel möglich. -Neuer Maximaler Zustellbetrag 40mm auf Wunsch noch erweiterbar. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Neuer DGS Papierbandfilter -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Maschine verfügt in der x-Achse über ein elektronisch gesteuertes Zustellsystem mit Schrittmotorantrieb. Hydraulische Tischlängs- und Eilgangbewegung. Vielseitige Einsatzmöglichkeit in der Produktion beim Aussenrund- und Innenschleifen oder für das Aussen-, Plan- und Innenschleifen in einer Aufspannung von Einzelteilen. Mögliche Optionen: -Halbautomatische Abrichtzyklen für das Aussen- und Innenschleifen -automatischer Abrichtkompensation. -Messsteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, cutting height (max.): 340 mm, cutting width (max.): 250 mm, cutting length (max.): 4,000 mm, saw blade diameter: 600 mm, disc diameter: 600 mm, Electronic double-head cutting machine with controlled axes with Ø 600 mm blades with automatic unloading of machined profiles The machine is composed of three main structures, a sturdy electro-welded steel base where the fixed cutting unit is stopped and a mobile cutting unit that slides along the electronically positioned base (X-axis). The rotary axes of both the RF and RM heads allow the cutting units to rotate with angles from 45° (internal) to 20° (external). The blade is operated by a oleo-pneumatic cylinder with speed regulator in exit and rapid return. Thanks to a horizontal locking system with double cylinder and vertical, perfect locking of every type of profile is ensured. The local pneumatic descent protections isolate the operating units during the cutting phase, ensuring excellent protection and practicality in using the machine. The 600 TSE is a latest-generation machine that can be easily integrated into the production cycle with remarkable ease of use thanks to the 15″ touch screen monitor on a Windows 10 platform, which allows you to easily program all cutting operations. Dsbswamc Sj Hcv Tascg Accessories: Industrial label printer that allows identification and association with the relevant order. Touch-screen control Automatic profile thickness sensor Automatic piece unloading system Internal/external blade inclination (see cutting diagram in the photo) Useful cutting length 4 meters

Condition: ready for operation (used), A line for filling, packaging, and palletizing bags with products like salt or fertilizers is available. It includes specialized machines for precise filling, packaging, and stacking of bags on pallets for shipment. The system is designed for continuous operation. 1) Bag filling machine Aventus FFS 600, filling range: 10kg-30kg, film thickness range: 120µm-180µm, accuracy class: X(1), deviation for 25kg bags: 50g-60g, deviation for 10kg bags: 25g-30g, packaging capacity: 45-550 bags/h or 20-25t/h, bag tolerance: +/-15mm. 2) Palletizing robot for the bags, max. pallet dimensions X/Y: 1300mm/900mm, loading height including pallet: 700mm-1500mm, max. load weight: 1500kg, max. loading capacity: 500-600 bags/h, recommended loading capacity: 450-550 bags/h. 3) Big Bag filling station Aventus FIBC EGF 1, Big Bag weight: 500kg, 600kg, 1000kg, max. Big Bag height: 1400mm, max. Big Bag width: 1000mm, max. Big Bag depth: 1000mm, loop length: 250mm, filling support diameter: 400mm, filling support height: 500mm, max. bag sag: 250mm, accuracy: +/-1g per 1kg. 4) Stretch hood system Aventus KL Stretch-Hood, max. loading width: 900mm, max. loading length: 1300mm, max. loading height including pallet: 1500mm, max. load weight: 1500kg, loading material: FFS-PE, film thickness: 100µm-120µm, stretch capacity: 80-120 packages/h. 5) Conveyor system with checkweigher, total conveyor length: approx. 9000mm, belt width: 700mm, checkweigher table width: 1300mm, working height: 600mm-750mm. 6) Label printer/thermal transfer printer Smart Date X, printing speed: 350 packages/min, resolution: 300dpi, printing area X/Y: 53mm/73mm. Documentation available. An on-site inspection is possible. Dcjb Hou Ilcrjcv Taeg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine Doborb E E Ns Hcv Taocg -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0-9,99 mm/Ø 0-9,99 mm/Ø ±10 ° longitudinal feed of the table 1100 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannung kg cross travel max. 270 mm 80 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 6,5 kW weight of the machine ca. 3,05 t dimensions of the machine ca. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo of already delivered machine in centre distance 1000mm. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for familiarisation. -Diagnostic function with display of PLC messages and digital I/O -Dressing function can be extended or changed at the customer's request. -Orientated spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. Deb Hcvouxft Es Taocg -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Encoder with digital display in the workpiece headstock -Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) with spindle possible) -New stable internal grinding device diameter 80mm or 100mm with height adjustment. -Increase of the centre height to max. 225mm -Speed control for the grinding spindle Included: -Operating tool -Clamping tube for chuck Further accessories on request. The x-axis of the machine has an electronically controlled infeed system with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile application in production for external cylindrical and internal internal grinding or for external, face and internal grinding in one clamping clamping of individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -automatic dressing compensation. -Measuring control