Used Valtra/Valmet 600 for sale (22,425)

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Debjvcyaws Hida Djkl Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, mileage: 270,000 km, power: 176 kW (239.29 HP), first registration: 12/2007, overall weight: 11,990 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro4, loading space volume: 34 m³, loading space width: 2,455 mm, loading space length: 6,185 mm, loading space height: 2,295 mm, total width: 2,600 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, tail-lift, Refrigerated box body, CARRIER cooling unit type: XARIAS 600, diesel - electric, BÄR folding tail lift type BC 1000F2, load capacity approx. 1000 kg, double-wing door with espagnolette lock at the rear, plastic floor, 1x anchor rail for locking rods on each side, ABS, ASR, air conditioning, driver's comfort suspension seat, heated exterior mirrors and electrically adjustable passenger side, roof hatch, fog lights, air suspension with lifting and lowering device rear axle, vehicle can be covered with advertising and/or labeled Dobsvnnpko Hida Dekl Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Year of construction: 2020, Condition: as good as new (ex-display), Automatic machine for the production of disposable, foil gloves with a welder and hole cutter. Ideal for the production of PE/EVA/CPE gloves. Technical data: Model: SLQ-600 Glove length: 200-400 mm Glove width: 270-330 mm Foil thickness: 0.008-0.02 mm Efficiency 40-150 pieces / min Power: 1.5 kW Power supply: 230 V 50/60 Hz Weight: 600 kg Dimensions: 2300 x 1190 x 1500 mm Year of production: 2020 Includes a welding machine / hanging hole cutter: Dksb Hsh E Sp Roida Del Model: BX 450 Power: 100 W Power supply: 230 V 50/60 Hz Weight: 25 kg Year of production: 2020 Technical condition: used machines, functional

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11200 € 229.6 € 2500 kg Dkob Hidajvdk Tdo Djl 1300 mm 450 mm 550 mm 600 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: Pneumatic downholder (CMC P3 2500 600 M D1300) € 2.100,-- BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

Condition: good (used), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand terminal, hand control panel -Manufacturer: Mikron, hand terminal control panel from CNC milling machine Mikron UME 600 Dkob Hidsrc Ikxea Djl -Connection plug: see photos -Transport dimensions: 400/240/H95 mm -Weight: 1.1kg

Year of construction: 2000, Condition: ready for operation (used), Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible. Dkob Hidsv Rp Tisa Djl

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PRJ037887, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, rotational speed (max.): 13,000 rpm, distance table to spindle center: 740 mm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Machining center including dividing head TECHNICAL DETAILS X-axis (longitudinal stroke): 600 mm Y-axis (transverse stroke): 400 mm Z-axis (vertical stroke): 600 mm Distance spindle-table (min./max.): 140/740 mm (with spacer, item special option 2) Control: Heidenhain iTNC 530 with smarT.NC Machine table Table width: 750 mm Dobjv Rn Rme Hida Dokl T-slots according to DIN 650 (width/distance): 14 x 80 / 100 mm Middle T-slot as guide slot: 14 H7 mm Table load: max. 500 kg Main spindle drive Spindle type: Conventional main spindle with 4-way fixed-loose bearing and lifetime grease lubrication Bearing seal: Sealing air seal with additional splash ring Tool holder: SK 40 (according to DIN 69871) Pull bolt: DIN 69872-19 Blown air through the spindle center: available Spindle drive motor Type: 4-pole, frequency-controlled three-phase asynchronous motor with external air cooling (maintenance-free) Drive power (25% duty cycle): max. 13 kW Torque (25% duty cycle): max. 55 Nm Speed range continuously variable (25% duty cycle): max. 13,000 rpm Tool magazine Magazine type: plate Magazine positions: 24 Tool diameter (fully loaded): max. 100 mm Tool diameter (with free adjacent positions): max. 200 mm Tool length (at Ø 25): max. 350 mm Tool weight: max. 4 kg Tool change time: approx. 1.9 s Chip-to-chip time: approx. 3.9 s MACHINE DETAILS Air pressure: min. 6 bar Hydraulics: max. 6.8 l/min at 140 bar Connection power: 20 kVA Width: approx. 2,700 mm Depth: approx. 1,780 mm Height: approx. 2,785 mm Machine as transport unit: approx. 3,500 kg EQUIPMENT - Chip conveyor - Coolant -

Condition: new, mileage: 1 km, color: white, overall weight: 16,000 kg, first registration: 04/2011, loading space volume: 45 m³, loading space length: 7,350 mm, loading space width: 2,480 mm, loading space height: 2,495 mm, Suitable for excavators from 6 to 11 tons, including hydraulic hoses, chisels, oil quantity 50/90 L/min, operating pressure 118-147 bar Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Dkob Hidevnm Ekja Dsl

Condition: excellent (used), Year of construction: 2015, operating hours: 918 h, Functionality: fully functional, power: 23.54 kW (32.01 HP), fuel type: diesel, fuel: diesel, Equipment: air conditioning, HAKO Citymaster 600 Municipal Equipment Carrier / Vacuum Sweeper First commissioned in 2015, only 918 total operating hours, very good overall condition, extensive customer service with extensive refurbishment just completed, ready for immediate use. Dob Hidaetxp A Ss Dekl Sold as a used machine, with no returns, warranty, or guarantee. Net price €33,529 // Gross price €39,900 - Inspection is welcome! - Shipping can be arranged nationwide; costs depend on distance! - We would be happy to arrange for an attractive leasing/financing offer through our leasing partner!

Condition: new, Year of construction: 2024, neu 2024 7314 prompt, Zwischenverkauf v Türkei 13300 € 272.65 € 1 2500 kg 1300 mm 450 mm 550 mm 600 mm 80 mm 1600 mm 1550 mm Dsb Hiovdk Smoda Djkl 2000 mm 580 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Pneumatic downholder

Condition: excellent (used), 15 kW motor Inlet opening size: 600 x 800 Number of blades: 14 Screen: 20 mm/1.5 mm Deb Hisv R Tz Reda Dskl

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 396.900.217.2345, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,020 mm, total width: 2,790 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, table width: 950 mm, table length: 630 mm, tank capacity: 1,000 l, travel speed (max.): 300 mm/min, Equipment: cooling unit, A really reliable machine with extreme precision. Dob Hidajv Um I So Dskl

Condition: excellent (used), Year of construction: 2007, operating hours: 2,000 h, Functionality: fully functional, turning diameter: 200 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 150 kg, overall weight: 5,200 kg, • Type: AWH 600 Dksb Hidovwz Ulsa Dol Machine Model: PMT AWH CNC • Manufacturer: PMT Mascines LTD • Year of manufacture: 2007 • Live viewing available: YES • Condition: Good condition, ready to work • Automatic Marposs stone balancing, Automatic Marposs measurement Basic data of the machine: Maximum grinding diameter: 250 mm Maximum grinding length: 600 mm

Condition: used, Year of construction: 1996, operating hours: 31,700 h, load capacity: 12,000 kg, lifting height: 500 mm, Equipment: cabin, Duplex lifting frame, lifting height approx. 5.00 m, load capacity approx. 12,000 kg, hydraulically adjustable fork and side thrust, fork length: 2,400 mm, fork carriage 2,450 mm, overall height 4,000 mm, VOLVO Penta 175 HP engine, closed cabin with heating, vehicle can be covered with advertising and/or labeled, work lights Dsb Hevnm Ewoida Djkl Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 2,175 h, load capacity: 5,000 kg, lifting height: 4,780 mm, free lift: 1,670 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Load Center: 600 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Reconditioned without warranty Technical Condition: Very good Front Tire Type: Non-Marking Rear Tire Type: Non-Marking Battery Voltage: 80V Dkeb Hijv Nr Ndjda Djl Battery Ah: 930Ah Battery Type: PzS Battery Year of Manufacture: 2018 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. 3rd valve, 4th valve, rear work light, front work light, heating, STVZO (German Road Traffic Licensing Regulations), full cab, safety light, rotating beacon

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 71100 € 1429.11 € 600 mm 1500 mm 300 mm 80 mm 400 mm 400 mm 8 90 M 3 20 - 100, 80 - 400, 400 - U/Min max. 8 m/min max. 8 m/min 290 mm 90 mm 5 MK 225 mm 11 kW 3,5 / 22 kW/Nm 1,75 / 11 kW/Nm 120 Nm 1250 daN 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 69.800,00 mm € 72.600,00 mm € 75.400,00 mm Djbsuynbbj Hida Djkl € 78.400,00 mm € 81.300,00

Condition: used, Year of construction: 2008, Transnorm conveyor belt GF 2200-600-500 RA2388 Technical data: Make: Transnorm Conveyor length (NL): 2200 mm Frame width (NB): 600 mm, 700 mm with motor Dkjb Hidsv Rhx Rsa Djl Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,3-1,2 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, Riehle lye device Standing device made of stainless steel Dkeb Hjupvnmsida Del Incl. mobile table with shelf and locking rollers Dipping with 4-spring technology Lye drain tap at the bottom Suitable for sheet size 600 x 400 mm Dimensions in mm: 500 x 702 x 880 WxDxH Used device cleaned Many lye dipping devices in stock for you!

Condition: reconditioned (used), Properties: Used telescopic belt conveyors with pedestal side wheels Condition: fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Dkjb Hed Dd T Ueida Dol Color: Blue Incl. wheels / feet Incl. control cabinet Incl. lighting Optically and technically very well worked up! Telescopic belt conveyor The telescopic belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation of telescopic belt conveyors can promote sensitive and different-sized containers, boxes or other packaging and article units to the task or place of delivery and, for example, also serves as a connecting route before or between production and machinery. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Retracted length: 6,000 mm Extended footage: 16,000 mm Total width with stand: 1,650 mm Total width: 980 mm Belt width: 600 mm Strap type: Smooth Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Simply tell us your needs and the local

Condition: like new (used), Year of construction: 2019, operating hours: 500 h, Functionality: fully functional, Equipment: documentation/manual, Mobile Packing Line for granulate 15t/h 25 kg bags PP and PPL Packing up 50 kg bags Dob Hidov Sqw Eoa Dekl

Year of construction: 2025, Condition: new, Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-38)mm; power: 220V, 6.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1800xW1500xH1900mm; weight: 750kg. Djb Hidjv Nmdpja Djkl That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 15200 € 311.6 € 4000 kg 1300 mm 450 - 550 mm 600 mm 50 mm 80 mm Djb Hidasvdk Rve Dekl motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumatic downholder(CMC P3 4000 600 M D1300) € 2.200,--

Condition: used, Year of construction: 2008, Transnorm conveyor belt GF 2250-600-500 RA2389 Technical data: Make: Transnorm Conveyor length (NL): 2250 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,15-0,80 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Deb Hov Rhybeida Dokl Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-38)mm; power: 220V, 6.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1800xW1500xH1900mm; weight: 750kg. Dsb Hiov Nmfgoda Dekl That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%; max. speed of the machine in neutral: 10x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-38)mm; power: 220V, 6.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1800xW1500xH1900mm; weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dkob Hijv Nmf Tjda Dsl Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.