Used Barford Sx 7000 for sale (1,768)

Condition: used, Year of construction: 2002, Table milling machine Holztech T120 Year of construction 2002 Debvrov Ukn Ne Df Aekl Serial number AB150372 400V Speeds per minute 3000/4500/6000/7000/10000 Spindle diameter 30mm - Year: 2002 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Wet exhaust system Dsbjci Tlrsvr Df Askl - available in steel and stainless steel - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: used, Year of construction: 2015, operating hours: 3,185 h, load capacity: 3,500 kg, lifting height: 4,000 mm, mast type: duplex, power: 41 kW (55.74 HP), fork carriage width: 1,140 mm, ground clearance: 100 mm, front tire type: Vo.: Solideal / Hi.: Maxam, front tire size: 7.00-15, rear tire type: Vo.: Solideal / Hi.: Maxam, rear tire size: 6,50-10, total length: 4,000 mm, wheelbase: 1,670 mm, engine type: Toyota 1ZS-EC A, drive type: Diesel, construction width: 1,710 mm, net weight: 4,900 kg, - Hersteller: Toyota - Antrieb: Diesel - Bedienung: Sitz - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand: 495 mm - Achslast mit Last vorn/hinten kg 7260/1100 - Achslast ohne Last vorn/hinten: kg 1710/3150 - Reifentyp - Luft (P), Superelastik (SE), Vollgummi (R): SE - Räder, Anzahl vorn/hinten (x = angetrieben) 2x/2 - Spurweite vorn mm 106 - Spurweite hinten mm 965 - Neigung Hubgerüst vor/zurück a/b Grad 6/11 - Höhe Hubgerüst eingefahren mm 2115 - Sitzhöhe mm 1120 Djbvrsvfhcrs Df Ajkl - Kupplungshöhe mm 335 - Gabelträger FEM/ISO 2328, Klasse/Typ A, B IIIA - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4185 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4385 - Wenderadius mm 2490 - Kleinster Drehpunktabstand mm 745 - Fahrgeschwindigkeit mit/ohne Last km/h 16,5/17,0 - Hubgeschwindigkeit mit/ohne Last m/s 0,37/0,40 - Senkgeschwindigkeit mit/ohne Last m/s 0,50/0,45 - Max. Zugkraft mit/ohne Last N 17000/10600 - Steigfähigkeit mit/ohne Last % 18 - Betriebsbremse Hydraulisch - Arbeitsdruck für Anbaugeräte bar 147 - Ölstrom für Anbaugeräte l/min 65-80 - Schalldruckpegel nach EN 12 053, Fahrerohr dB(A) 79

Condition: good (used), throat depth: 400 mm, ram adjustment: 80 mm, pressing force: 80 t, Capacity: 80 Ton Table surface: 750 x 550 mm Djbveugtkxsr Df Aokl Ram Adjustment: 80 mm Stroke length: 8 -112 mm No. of strokes: 78 p/min. Throat: 400 mm Complete with: - Pneumatic clutch - Safety screen Country of origin: Germany Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight: 7000 kg

Condition: used, mileage: 120,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 09/2018, emission class: euro6, color: white, number of seats: 3, Year of construction: 2018, total length: 5,998 mm, total width: 2,050 mm, total height: 2,522 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, For sale here is a well-maintained Fiat Ducato L3H2 van with the globally popular 2.3 liter diesel engine. * The vehicle is in good condition! * TÜV + Au = new without defects until (01/2027) * German vehicle Regularly serviced 1st hand VAT deductible Equipment: Dkjbvrevnytbj Df Aol L3H2 van Air conditioning Cruise control Navigation system Rear view camera PDC rear Electric exterior mirrors Central locking * 3 seats Truck registration * and much more... Technical data: Permissible total weight: 3500KG Empty weight: 2050KG Payload: 1450 KG Towing capacity: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your dream vehicle * Trade-in of the old vehicle at fair conditions * Transfer license plate (5-day/customs registration) usually on the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! The special features: Disinfection of the interior and ventilation system using ozone cleaning 2-stage polishing on the outside * Paint correction and smart repair if necessary All of our vehicles have also undergone thorough maintenance. Of course including new fluids, filters and other expenses that you should not have to deal with. Optionally, we can demonstrate the vehicle at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are fully available to you around the clock. If you have any questions, comments or special requests, do not hesitate to contact us! More information and insights into our business philosophy on Special equipment: Storage: Luggage net on rear doors, SX equipment, cruise control including speed limiter, rear wing doors (opening angle 260 / 270 degrees), loading space partition, LM rims 6x16 (V-spokes), full-size spare wheel (including spare wheel holder) Other equipment: Airbag on driver's side, indicators integrated in the outside mirror, brake assistant, rear wing doors without glazing, body/structure: large-capacity box, body variant: high roof, heated crankcase ventilation, adjustable steering column (steering wheel), engine 2.3 liter - 96 kW JTD KAT, wheelbase 4035 mm, low emissions according to Euro 6 emissions standard, sliding door loading/passenger compartment on the right, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: double passenger seat, Seats in the driver's cab: Driver's seat height adjustable, Seats in the driver's cab: Driver's seat with armrest and lumbar support, slightly tinted glazing, water sensor fuel filter, oil level sensor

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools Dkebvr Dfjwa Dx Ro Ajl - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: used, Year of construction: 2003, Crosscut saw Stromab TR 350 Year of construction 2003 Engine 3kW Saw blade 350mm Sawing capacity 210x30mm_200x50mm_150x80mm Rollerconveyor 3000mm & 2500mm Dksbvr Dfev Ukmfe Ajl Dimensions 7000x1000x1300mm, weight 250kg - Year: 2003 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Functionality: fully functional, machine/vehicle number: A2N1E700057, Year of construction: 2017, operating hours: 1,112 h, load capacity: 1,800 kg, lifting height: 5,150 mm, free lift: 1,645 mm, mast type: triplex, construction height: 2,240 mm, fork carriage width: 920 mm, fork length: 900 mm, total length: 1,935 mm, construction width: 1,125 mm, net weight: 3,375 kg, Electric 3-wheel forklift Chassis number: A2N1E700057 Dkobvrsvzuvde Df Asl Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 200/50-10 Rear tires type: Superelastic Rear tires size: 140/55-9 Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: Werbat Battery type: PzS Battery year of manufacture: 2017 Description: Device has been visually and technically refurbished. Maintenance including drive and hydraulic oil renewed. UVV inspection renewed. Load protection grid, side shift, 3rd valve, rear working light, front working light, roof cover, windscreen, load protection grid, full free lift, interior mirror, rotating beacon, windscreen wiper, 3-wheel, seat,

Year of construction: 2007, Condition: excellent (used), 1 x EVG Mesh Welding plant, Type GE 12/102-PV, year of production 2005, installed in 2006 For production of standard reinforcing mesh with line wire spacing of 100 mm and multiples. Working with line wires off vertical pay-off and pre-straightened and cut-to-length cross wires off a magazine. BASIC DATA: Max welding width: 2600 mm Max cross wire length: 2750 mm Debvr Dfomftwke Ajkl Min mesh width: 1200 mm Max. mesh length: 7000 mm Min. mesh length: 1000 mm Line wire diameter off coil: 4 – 8 mm (at 100 mm line wire spacing) 4-10 mm (at 150 mm line wire spacing) Cross wire diameter: 4 – 10 mm pre-straightened and cut Line wire spacing: 100 mm and multiples Cross wire spacing: 50 mm , larger steps infinitely programmable 2 x Invert vertical type drawing ,machine (Cheng I machinery, Taiwan), year of production 2007 Model: IVD-800 (ribbing model) Inlet wire: 10 – 6 mm, low carbon wire Motor: 100 HP, AC motor with inverter (Brand TECO) Dia. Of the drum: 800 mm, made of alloy cast iron, the wire drawing zone (220 mm high) is made of tungsten carbide coating Speed: 0 – 150 m/min. Cooling system: both inside drum and die are water cooling Spooler: with 3 HP AC motor with inverter, coils 0 – 1500 kg 1 x Wafios, fully electronic wire straightening and cutting-off machine, model R 43, year of production, 2007 2 pairs of separate driven feed rolls, frequency regulated, pneumatically open and close. Separate driven rotary body straightener, frequency regulated. Stationary shear, servo motor driven. Change over time: 1 – 3 minutes Length tolerance: +/- 0,3 mm, depending on wire size, wire quality, condition of coil and pay of . Collecting station - 3 m

Year of construction: 2006, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 7000 rpm Number of axis 7 Additional Equipment Double spindle version Y-axis Main and counter spindle Collet chuck 1 attached tool axial 1 attached tool radial Belt filter system Loading magazine FMB Turbo 10-72 XT This 7-axis Gildemeister Twin 41 horizontal turning machine was manufactured in 2006. Ideal for precision and complex turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Gildemeister Twin 41 horizontal turning machine. Contact us for more information. Application Types Turning Dobvr Dfjwann Ne Aokl

Condition: new, Functionality: fully functional, For sale is a pallet rack with a total of 27 pallet spaces. The rack is 3500 mm wide and 8400 mm long. Technical specifications for installation: Number of rack rows: 1 pc. Rack length: approx. 22,500 mm Number of bays: 8 pc., each 2,700 mm long Number of levels plus floor level: 6 pc. It consists of: 9x frames 7000x1100 450_2, R5019 80x sets of PR2-5HK 2700 beams 36x sets of Fischer FAZ II 12/10 anchors 1x load plate includes delivery Net price: €5,500.00 Gross price: €6,545.00 Dkebvewdwller Df Aol We deliver within 10 days. We would be happy to provide you with a non-binding quote. Sales, installation, disassembly, repair, and purchase

Condition: used, Year of construction: 2005, number of straightening rollers: 9, coil weight: 10,500 kg, coil outer diameter: 2,020 mm, material thickness: 4 mm, sheet thickness steel (max.): 4 mm, coil width: 500 mm, sheet thickness (max.): 4 mm, load capacity: 10,500 kg, material width: 500 mm, overall weight: 17,000 kg, power: 30 kW (40.79 HP), CONTROLS .. PLC OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 500 mm .. sheet thickness max.: 4 mm .. coil weight max.: 10.5 to .. feedstock transport direction: right to left COIL CHAIR .. coil weight max.: 10.5 to .. stroke: 750 mm DECOILER .. design: single reel .. sheet width max.: 500 mm .. sheet width (min): 150 mm .. coil weight max.: 10.5 to .. max. diameter of coil: 2020 mm .. mandrel expansion range from: 470 mm .. mandrel expansion range up to: 530 mm .. feed velocity max.: 20 m/min CROP SHEAR .. sheet thickness max.: 4 mm .. working width max.: 530 mm .. stroke rate (max.): 20 /min LEVELLER UNIT .. sheet width max.: 500 mm .. sheet width (min): 150 mm .. sheet thickness max.: 4 mm .. sheet thickness min.: 2 mm .. number of leveller rolls: 9 .. diameter of leveller rolls: 56 mm .. diameter of feed rolls: 150 mm .. feed velocity max.: 20 m/min ELECTRICAL SPECIFICATIONS .. total power consumption: 30 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 17000 kg Coil line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU RM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-to-length shear Huttenlocher & Schäfer KSK/S year of construction 2017 Debvswaw Dger Df Ajkl

Condition: used, Year of construction: 2019, operating hours: 13,119 h, lifting height: 3,520 mm, fuel type: electric, mast type: duplex, fork length: 2,400 mm, total height: 2,920 mm, total length: 3,750 mm, total width: 2,000 mm, color: other, Empty weight: 12.414 kg Lifting capacity: 7.000 kg Fork dimensions: 2.400 x 1.930 mm Price: On request - Lifting capacity: 7000kg - Lifting height: 3520mm - Maximum fork width: 1930mm - Number of wheels: 6 Wheels - Overhead clearance: 2920mm - Attachment: 4 vorkenspreider, Side-shift - Options: Work lights, Verwarming, Full cabin - Fork length: 2400mm - Free lift: 0mm - Mast: Duplex - Year: 2019 - Documentation available: No - CE mark available: Yes - Serial number: 516342V00017 - Operating hours: 13119 - Battery voltage: 80V - Brand/Type: Still - Capacity: 1240Ah - Battery year of construction: 2019 - Inspection valid until: 06.2025 - Drive: Elektric - Transport dimensions: 3750mm x 2000mm x 2920mm (l x w x h) - Transport weight [kg]: 12414kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dsbvov Ualqsr Df Askl Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2018, Alzmetall GS600/5-T 5 Axis CNC Machining Centre (2018) X-Axis 460 mm Y-Axis 600 mm Z-Axis 400 mm Interference circle diameter 640 mm Distance Spindle Up to 550 mm Machine-Table Load 500 kg Maximum rapid travel X/Y/Z at TCP max. 75 m/min Cutting-Tool Interface HSK-A63 Motor-Spindle-Power at CDF 25% max. 26 kW Motor-Spindle Torque at CDF 25% max. 116 Nm Wiring diagram : H5774-95-2845 Machine weight 7000 kgs Resy filtration system Model: KBF - 452/500 Serial number 18-P02571 Swarf conveyor and Tolley Dksbvr Dowa Sycsf Asl Erowa pallet changer Model :RobotEasy Serial number : ERE 4045 Year 2018 Table size 31.5 inches (800 mm) Tool changer capacity 32 tools

Year of construction: 2010, Condition: excellent (used), - Production per hour : 4 panels - Daily production on 8 hours shift : 32 -Year production on 250 days: 7040 -Efficiency: 1MWp/year -Required Power: 40kW - Electric Feeding : V 380/3 + N +T 50 Hz -Water Consumption : 210 litres / our (0 litres with refrigeration) -Air consumption: 7000 liters / hour Final Product A) Standard 36 square cells 103 x 103 mm (4”) Panel with typical dimensions: 990 x 450 mm Power per cell: 1,5 Wp Cells per panel: 36 Year Production per shift : 380.160 Wp Panels per year: 7040 B) Standard 72 square cells 103 x 103 mm (4”) Panel with typical dimensions : 1300 x 660 mm Power per cell : 1,4 Wp Cells per panel : 72 Year Production per shift : 760.320 Wp Panels per year: 7040 C) Standard 36 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1200 x 540 mm Power per cell : 2,5 Wp Cells per panel : 36 Year Production per shift : 633.600 Wp Panels per year : 7040 D) Standard 72 square cells 125 x 125 mm (5”) Panel with typical dimensions : 1600 x 800 mm Power per cell : 2,5 Wp Cells per panel: 72 Year Production per shift : 1.267.200 Wp Panels per year: 7040 Dkebvr Djuhwmgsf Ael E) Standard 36 square cells 156 x 156 mm (6”) Panel with typical dimensions : 1450 x 650 mm Power per cell : 3,5 Wp Cells per panel : 36 Stran 4 od 7 Year Production per shift : 887.040 Wp Panels per year : 7040 F) Standard 72 square cells 156 x 156 mm (6”) Panels with typical dimensions : 1950 x 980 mm Power per cell : 3,5 Wp Cells per panel : 72 Year Production per shift : 1.774.080 Wp

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3701, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Dkebvr Dfowfb S Es Aol Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m

Condition: new, neu ca. 4 Monate ab Auftragse Türkei Dkebvrovvngxs Df Aol 53900 € 1083.39 € Doppelsäulenführung 7000x41x1,3 mm 15 - 120 m/min 560 mm 540 mm 810 x 530 mm rund 520 mm, quadrat 520 rund 520 mm, quadrat 520 rund 330 mm, quadrat 330 875 mm 1.1 kW 4 kW 0.12 kW 3850 mm 1700 mm 2450 mm 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price)

Condition: used, mileage: 477,131 km, power: 182 kW (247.45 HP), first registration: 05/2013, overall weight: 11,990 kg, fuel type: diesel, color: blue, axle configuration: 4x2, maximum load weight: 6,550 kg, empty load weight: 5,440 kg, tire size: 245/70 17,5, next inspection (TÜV): 05/2025, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space volume: 8 m³, loading space width: 2,480 mm, loading space length: 7,000 mm, loading space height: 500 mm, Year of construction: 2013, operating hours: 477,131 h, total length: 7,000 mm, tire condition: 50 %, front tire size: 245/70 17,5, rear tire size: 245/70 17,5, Equipment: ABS, air conditioning, truck registration, Vehicle number for inquiries: 69521 DAF, LF 45.220 * Year of manufacture: 2013 * ABS, anti-lock braking system * Air conditioning * Air suspension * Local transport > 7.5 * Radio/CD player * Electric windows + mirrors Dkebvr Dowdq Tcof Ajl * Inspections: MOT / AU 05.2025 * Transmission type: Manual transmission * Gross vehicle weight: 11,990 kg * Unladen weight: 5,440 kg * Payload: 6,550 kg * Tire condition 1st axle: 50% - 40% - Tire size: 245/70 R17.5 * Tire condition 2nd axle: 50%|50% - 40%|40% - Tire size: 245/70 R17.5 * Internal dimensions: L=7000 mm, W=2480 mm H = 500 mm * Upon request, we would be happy to send you a video and additional pictures. Subject to errors and prior sale. Additional pictures and 360-degree images can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paint jobs, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialists; we will be happy to advise you. Reference no. for inquiries: 69521 DAF, LF 45,220 * Year of manufacture: 2013 * ABS, anti-lock braking system * Air conditioning * Pneumatic suspension * urban transport > 7.5 * Radio CD * electric windows + mirror * Inspection: HU / AU 05.2025 * Transmission: manual transmission * Total weight: 11,990 kg * Empty weight: 5,440 kg * Payload: 6,550 kg * Tire condition 1. Axles: 50% -- 40% - Tire size: 245/70 R17.5 * Tire condition 2. Axles: 50%|50% -- 40%|40% - Tire size: 245/70 R17.5 * Dimensions of vehicle interior: L=7000 mm, W=2480 mm, H=500 mm * We would be happy to send you a video and additional pictures upon request. Subject to errors and prior sale. You can find more pictures and 360-degree images on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of utility vehicles * Quick, uncomplicated financing * Applications for all (export) documentation * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, varnishing, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of utility vehicles Ask our trained staff, we will gladly advise you.

Condition: used, Plate roller Sheet metal roller Model year: 1982 Removable upper-roller Model: 3-Roller Dkebvsvna Nvjr Df Ajl Manufacturer: Roundo Type: PS 255 Max. sheet width: 3000 mm Max. sheet thickness pre-bending: 6 mm Max. sheet thickness 750mm diameter: 11mm Max. sheet thickness 1500mm diameter: 12mm Max. sheet thickness 3000-5000mm diameter: 14mm Top roller diameter: 255 mm Motor-power: 5,5 kW Including remote-control Machine-weight: 7000kg Financial information VAT: The displayed price is excluding VAT VAT/margin: VAT deductible for businesses Delivery and trade-in always possible across all industrial sectors For example: Woodworking, metalworking, and internal transport.

Condition: used, Year of construction: 2006, operating hours: 67,130 h, Used Filling Machine A3 Flex 600V 1000 Edge 7000 bph Upgrade in 2024, excellent condition and warranty on the replaced spare part Overview of the Used Filling Machine A3 Flex Djbvr Dfjwbhdao Aekl The Used Filling Machine A3 Flex 600V 1000 Edge 7000 bph delivers advanced aseptic filling performance for dairy-based beverages and fruit juices. Originally, Tetra Pak manufactured this A3 FLEX 600V model in 2006. However, in 2024, the company upgraded it to the 600V version. As a result, the machine now complies with modern standards for process control, performance, and operational safety. Therefore, it remains a highly relevant and reliable option for current production needs. Packaging Format and Technical Configuration The Used Filling Machine A3 Flex supports the 1000 ml Edge format, a version of the Tetra Brik package that features an inclined top edge. Consequently, the design improves ergonomic handling and simplifies the application of screw caps. Furthermore, the system uses a single filling valve, which aligns with the standard architecture of A3 Flex machines. These machines perform the filling process vertically under aseptic conditions. In addition, the setup preserves a sterile environment throughout all stages: forming, filling, and sealing. Output Capacity and Operational Hours The Used Filling Machine A3 Flex 600V 1000 Edge 7000 bph delivers a nominal output of 7000 packs per hour. Hence, it ranks among mid-to-high performance solutions in the aseptic filling sector for non-carbonated beverages. Over time, the machine has logged 67,130 working hours, which technicians can use as a key metric for technical assessment. Despite the machine’s age, its solid maintenance history and the 2024 upgrade ensure that it can continue operating effectively in demanding production environments. Product Applications and Hygienic Design The Used Filling Machine A3 Flex handles dairy and juice products with ease. Moreover, it meets all aseptic packaging requirements, including sterilization and hermetic sealing. The manufacturer built the internal circuits and filling chamber with stainless steel. As a result, the design enables efficient sanitation and ensures compatibility with clean-in-place (CIP) procedures. Additionally, the hygienic design aligns with current food safety standards for the beverage industry, thus making it suitable for sensitive applications. Integration and Control System of the Used Filling Machine A3 Flex The Used Filling Machine A3 Flex offers a compact footprint and a modular structure. Therefore, technicians can integrate it seamlessly into existing bottling lines. Alongside its structure, the machine includes a centralized HMI control panel. Operators use this interface to manage daily activities. Not only does it simplify the workflow, but it also allows for quick adjustments to production parameters or packaging formats. Consequently, the intuitive interface boosts efficiency while supporting real-time process monitoring.

Condition: ready for operation (used), Functionality: fully functional, turning diameter over cross slide: 660 mm, turning diameter over bed slide: 900 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, overall weight: 7,000 kg, Poreba TPK 90A1/2M Chuck 800 mm 2000mm between Centres Swing over bed 900 mm Swing over saddle 660 mm Dkjbvrowbd Dvs Df Asl Spindle Speed 710 rpm Weight 7000 kg approx.

Condition: used, Year of construction: 2000, machine/vehicle number: R6A N3602, turning length: 610 mm, total height: 1,900 mm, total length: 3,000 mm, total width: 2,000 mm, Equipment: documentation/manual, Description Year of manufacture: 2000 Control type: CNC Turning diameter over bed: 600 mm Turning length: 210/610 mm Control system: 810D/840D Revolutions per minute: 1 - 6300 rpm Spindle bore: Ø 42 mm Outer spindle diameter in forward position: Ø 80 mm Max. spindle torque: 86 Nm Feed motor: X/Z: 5000 / 7000 N Rapid traverse - X-axis: X/Z: 16 / 20 m/min Tool turret - number of stations: 12 / VDI 30 Dkebvrswd Uuds Df Ajl Tailstock taper ISO: MK4 Tailstock adjustment: 500 (stroke) mm Main spindle power: 7.5 (100% = 11 kW) kW Operating hours - idle: h Electrical - Voltage/Frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA Weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 1.9 m

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut Dkobvr Dfjfh R Tys Aol 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: used, Year of construction: 1970, Press brake Model: Conventional Manufacturer: LVD Type: PP Year of manufacturer: 1970 Capacity: 150t Maximum bending width: 2500mm Distance between column: 2040mm Backgauge: 900mm Throat: 250mm Stroke: 175mm Machine-dimensions: 3100x2100x3250mm Machine-weight: 7000kg - Year: 1970 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkebvrsvq Ukge Df Ajl Bram van Summeren

Condition: used, Year of construction: 2000, Please note that this single machine are not sold individually but are part of this bottling line: CLICK HERE   Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph General Technical Description The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph is an integrated bottling solution designed for efficient filling operations. This monoblock combines rinsing, filling, and capping processes into a single unit. It is engineered to handle both carbonated and still beverages with high precision and reliability. Mechanical and Structural Features Constructed with robust stainless steel, the machine ensures durability and resistance to corrosion. The rinsing station features 32 valves, providing thorough internal cleaning of bottles. The filling unit includes 56 isobaric valves, designed to maintain equal pressure during filling. This is critical for carbonated products, preventing foam and ensuring consistent fill levels. Capping Systems The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph is equipped with two capping turrets. One has 8 heads for crown caps, and the other has 8 heads for plastic screw caps. This dual capping capability offers flexibility in packaging options. The precise torque control ensures secure sealing, maintaining product integrity during distribution. Operational Capacity and Efficiency With a capacity of up to 7000 bottles per hour, the machine suits medium-scale production needs. The synchronized operation of rinsing, filling, and capping reduces bottlenecks. The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph optimizes throughput while maintaining high-quality standards. Automation and Control Systems Dksbvrowbfh Ae Df Ael Equipped with advanced PLC systems, the monoblock allows for precise control over the filling process. Operators can adjust parameters such as fill levels and production speed via an intuitive interface. Sensors monitor critical functions, providing real-time data to ensure consistent performance and quick response to any deviations. Compatibility and Adaptability Designed to handle both PET and glass bottles, the machine accommodates various bottle sizes and shapes. Changeover procedures are streamlined to minimize downtime when switching formats. The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph offers versatility for producers handling multiple product lines. Maintenance and Reliability The machine’s design facilitates easy access for maintenance tasks, reducing service time. High-quality components and wear-resistant materials extend the equipment’s lifespan. The Used Isobaric Filling Monoblock Procomac 32-56-8-8 up to 7000 bph is known for its reliability in continuous operation, essential for meeting production targets. Applications in the Industry Ideal for carbonated beverages like soft drinks, beer, and sparkling water, the isobaric filling technology preserves carbonation levels.