Used Barford Sx 7000 for sale (1,771)

Condition: used, Year of construction: 1994, Design: swiveling Swivel angle forwards: + 45° Swivel angle backwards: -10 degrees Table length: 2500 mm Table width: 870 mm Extendable frame support: Yes Number of speeds: 5 Speeds: 3000/4500/6000/7000/10000 rpm Speed selection: Belt shifting + pole switching Speed display: LED Cone of the milling spindle: with 25 pneumatic interchangeable spindles Clamping length of milling spindle: 120 mm Diameter of milling arbor: 30 mm Material of stand: steel Control panel position: above Height adjustment of spindle: electric Swivel adjustment of spindle: electric Spindle locking: manual Spindle brakes: yes Extraction diameter of milling stop: 120 mm Extraction diameter of machine: 120 mm Spindle direction: left/right Motor power: 5.5 kW Electric axes: Spindle height & swivel Table opening closing: Insert segment Stop jaw design: Aigner stop system Stop adjustment: Motorized Milling jaw adjustment: Manual Feed mechanism: Yes Feed adjustment: Fixed speeds Feed: 4 rollers Weight approx.: 1000 kg Dimensions: 2500 x 1500 x 1400 mm Storage location: Nattheim Dcoln Rhljvvkufezog

Condition: good (used), mileage: 658,598 km, power: 345 kW (469.07 HP), first registration: 02/2018, fuel type: diesel, color: white, axle configuration: 6x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 4,100 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Fixed - Hydraulic System - Alloy Wheels - Power Take-Off - Pump - Sleeper Cab - Additional Braking System = Remarks = Number of axles: 3, Configuration: 6x2, Tare weight: 8771 kg, Gross weight: 27000 kg, Total fuel capacity: 550 liters, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of locks: 1, Alloy wheels, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (Control Unit), Digital Tachograph, Air conditioning, Auxiliary heating, Color: White, Engine power: 345 kW (463 Hp), Euro: 6, Transmission type: I-Shift, Gears: 12, Additional braking system, Retarder Brand: Voith, Power steering, ABS, ASR, Hydraulic system, power take-off, pump, ADR EX/II EX/III FL AT VALID 10-2025 / 6X2 TWIN STEER / ALCOA'S = Further information = Transmission Transmission: 12-speed, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 9 mm; Right tire profile: 11 mm; Suspension: Leaf springs Axle 2: Lift axle; Steered; Left tire profile: 5 mm; Right tire profile: 10 mm; Suspension: Air suspension Axle 3: Twin tires; Left tire profile inside: 15 mm; Left tire profile outside: 15 mm; Right tire profile inside: 15 mm; Right tire profile outside: 16 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 654 x 255 x 353 cm Weight Curb weight: 8,771 kg Payload: 18,229 kg GVW: 27,000 kg Functional Pump: Yes Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 3 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support Dcsln Revx I Tkehlzog • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 168121, Equipment: documentation/manual, rotational speed infinitely variable, Max. turning Ø Dcjljwhrnisn Rhlzjg 130 mm X-Axis 300 mm Z-Axis 240 mm Spindle bore 32 mm Speedrange 7000 rpm

Condition: ready for operation (used), Year of construction: 2000, General Data Measurements width 2700 Measurements depth 3000 Measurements height 2700 Machine weight 7000 Control Unit Model OSP U10M Brand OKUMA Main Drive Spindle speed range 12000 Tool taper ISO 50 - BT Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 20 m/min Z-Axis Movement 450 mm Z-Axis Rapid Traverse 15 m/min Dolnsurn E Ae Rhlzocg Table Outer length 1300 mm Outer width 560 mm Table load 700 kg Additional Equipment Swarf conveyor Portable handwheel High pressure coolant This 3-axis Okuma MX-55VB vertical machining centre was manufactured in 2000. It features a robust 1300 x 560 table, high-speed spindle up to 12000 rpm, and a chain-type tool magazine with 20 positions. Equipped with the OSP U10M control unit, it ensures precision and efficiency. Ideal for handling loads up to 700 Kg, it includes accessories like a swarf conveyor and high-pressure coolant system. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: used, Year of construction: 2025, The KMK 106-MTF Automatic Foil Stamping and Die Cutting Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 450 x 370 mm to a maximum of 1060 x 770 mm. Weighing 17,000 kg, the machine features three longitudinal and two transverse foil pull shafts, with a maximum sheet size of 1060 x 770 mm and a minimum sheet size of 450 x 370 mm. The overall dimensions of the machine are 6050 x 4200 x 2260 mm, and it supports a maximum die-cutting size of 1050 x 750 mm. The machine has a gripper margin of 8-17 mm and a maximum stack height of 1350 mm. It includes 12 individually heatable zones, each adjustable up to 200????C, and a main motor power of 11 kW. The maximum embossing size is 1050 x 750 mm, with a maximum stack height of 1200 mm and a maximum longitudinal foil diameter of 250 mm. The machine comes with a 2-year warranty and includes installation. Additional features include an air requirement of 0.6 MPa and a flow rate of over 0.37 m????/min, a maximum mechanical speed of 7500 sheets per hour, and a maximum cutting force of 300 tons. It can handle paper weights ranging from 90 to 2000 g/m???? for cardboard, 0.1 to 2 mm for cardboard, and up to 4 mm for corrugated board. The delivery terms are FCA, with an estimated delivery time of 8-12 weeks after ordering. The maximum embossing speed is 6500 sheets per hour. Format: 1060 x 770 mm 450 x 370 mm Equipment: 8-12 weeks after ordering 2 year guarantee + installation Condition New machine Delnevfxvpo Rhlzocg Max. sheet size: 1060x770mm Min. sheet size: 450x370mm cutting size: 1050x750mm mping size : 1050x750mm Gripper margin: 8-17mm Paper range: 90-2000g/m2(cardboard) 0.1-2mm(cardboard) =4mm(corrugated) Maximum cutting force: 300 T Max. mechanical speed: 7500 s/h mping speed: 6500 s/h Foil pulling shafts,longitudinal 3,transversal 2 Zones individually heated: 12 heating zones ( each zone can be adjusted independently, max 200 Max. foil longitudinal diameter: 250mm ivery pile height: 1200mm ding pile height : 1350mm Main motor power: 11 kW Machine power: 46kw Machine weight: 17000kg Air requirements: 0.6Mpa, >0.37m3/min Overall machine dimensions: 6050x4200x2260mm

Condition: used, mileage: 137,000 km, power: 294 kW (399.73 HP), overall weight: 26,000 kg, fuel type: diesel, gearing type: mechanical, emission class: euro4, first registration: 06/2007, Equipment: ABS, all wheel drive, crane, electronic stability program (ESP), MAN TGA 26.400 EZ: 06/2007 ONLY 137000 km 6X4 ... 6x2 plus Hydrodrive Euro 4 !!!! TÜV NEW !!!! 3rd axle Steering and lift axle Crane: MKG MK 300 L 30 meter crane Delovm N Sdsn Rhlzocg Cable winch Radio 4x hydra extension + 2x mech extension Tel: We are happy to take care of your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number VAT deposit 2000 ¤ we speek english govorimo srpsko-hrvatski our service for you: - Customs license plates - Export documents and EUR1 - Transportation worldwide - Overnight accommodation - Transfer from Munich airport or Passau train station Tel:

Condition: used, Year of construction: 2013, Table milling machine with fixed spindle TF135 EP CLASS MAIN FEATURES "FLEX" MILLING STOP: INSTANTLY IN THE RIGHT POSITION "FAST" TABLE: THE BEST SUPPORT FOR THE WORKPIECE Technical data TF 135 EP CLASS Work table dimensions [mm] 1200x730 Milling spindle clamping length (C.E.) Diam. 30-35 (40-50) [mm] 140 (140) Spindle base projection from the table [mm] 52 Spindle base projection from the table with interchangeable spindle [mm] 92 Max. tool diameter under the table with table rings (with "Fast" table insert) [mm] (300x85) Milling stop with electronic programming (positioning relative to the spindle axis) [mm] 250 (from -125 to +125) External diameter of the extraction nozzle on the cutting guard [mm] 1x120 External diameter of the extraction nozzle on the base [mm] 1x120 Extraction speed [m/sec] 20 Extraction volume [m3/h] 1700 Controls/Functions - "Easy" electronic control - Electronic control of 4 to 7 axes selectable via numeric keypad and display on 7" color LCD screen in 16:9 format. - 300 Program locations - Spindle height adjustment via "Easy" control - "Flex" milling stop with automatic adjustment via "Easy" control - Additional module for "EASY" electronic control for programming the entire stop in relation to the tool diameter and the inlet stop for the desired chip removal. - Aluminum stop jaws with connecting bars - Swiveling device for the "FLEX" stop away from the work table - Max. tool diameter 250 mm - Aluminum stop jaws instead of wooden stop jaws with connecting bars for continuous support - "FAST" table insert instead of table rings for the largest possible support surface, manually adjustable - Spindle speeds 3000/4500/6000/7000/10000 rpm - Electrical speed display (version CE and with electrical protection devices) - Electrical preparation for feed device (C.E. version) - Reversible rotation direction with electrical blocking when switching Safety/Protection - Milling guard for working on the thrust ring (max. tool diameter 160mm) - C.E. emergency stop button - Micro-circuit breaker on the spindle lock (CE version) - Safety sensors for tool changes - Electro-pneumatic spindle lock - Micro-circuit breaker on the motor compartment cover - Lockable main switch - Thermal protection switch - 110V auxiliary circuit - Automatic motor brake (CE version) - Mechanical motor brake on the main motor (version with electrical protection devices) - CE declaration of conformity (CE version) Devices - Motor power 5.5kW 7.5HP 50Hz (6.6kW 9HP 60Hz) - Automatic star/delta start TF135 EP CLASS - Spindle moulder in C.E. Version 1 pc. Volt 400 EU 1 pc. Frequency 50 Hz 1 pc. Manual device for the feed support 1 pc. Height adjustment according to the workpiece thickness with mechanical digital display, and horizontal adjustment according to the tool diameter. Thanks to the control panel column, this device allows the feed to be pivoted away from the work table. Version "TL" PRO-10 for tenoning/slotting and profiling 1 pc. Complete with: - Tenoning slide on THK recirculating ball bearing guide. Can be quickly pivoted away from the work table - Pivoting telescopic stop (+45°/-45°) with respect to the feed direction - Adjustable telescopic stop with 4 positionable stops for programming the workpiece length - Side table extensions (total length 2500 mm) complete with extendable support rail for wide workpieces - Eccentric clamping device - Splinter wood on the longitudinal stop with stop point - Tenon Dcjln Rhlovvkurozjg

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Dsln Rhsu Ibvuolzscg Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: excellent (used), Year of construction: 2002, FAVRETTO TANGENTIAL GRINDING MODEL MB 130 MAXIMUM GRINDABLE LENGTH 1300 mm MAXIMUM GRINDABLE WIDTH 500 mm MAXIMUM GRINDABLE HEIGHT 550 mm MSX DIMENSIONS GRINDING WHEEL 400x100 mm Doln Rhlju E I N Aezjcg ELECTROMAGNETIC PLATE 1300 x 400 mm COOLANT TANK HYDRAULIC CONTROL UNIT AUTOMATIC DIAMOND CUTTING MACHINE USE AND MAINTENANCE MANUALS CE CERTIFICATION

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 2620mm Measurements depth 2025mm Measurements height 2670mm Control Unit Brand OKUMA Model OSP7000M-H Doljv Sfyhsn Rhlzecg Main Drive Spindle speed range 8000 RPM Number of axis 5 Movement X-Axis Movement 560 mm Y-Axis Movement 450 mm Z-Axis Movement 450 mm Tools Number of index 30 This 5-axis Okuma VH-40 vertical machining center was manufactured in 1998. Ideal for complex and precise machining tasks, it offers enhanced flexibility and productivity for your workshop. Consider the opportunity to buy this Okuma VH-40 vertical machining center. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1991, Table dimensions 1200 x 730 mm Motor output 4 kW Spindle length 180 mm table height 920 mm spindle stroke 260 mm Weight 580 kg Spindle speed 3000/4500/6000/7000/10000 rpm Dsln Rhlswbi H Aszscg Max. table protrusion: 230 mm Max. dimensions of the tools that can be lowered under the table: 320 x 90 mm

Condition: used, mileage: 34,700 km, power: 177 kW (240.65 HP), overall weight: 16,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 4,035 kg, empty load weight: 11,965 kg, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, first registration: 02/1990, Equipment: ABS, all wheel drive, compressor, crane, differential lock, trailer coupling, MAN F90 16.242 FA 4X4 Ex- fire brigade/ recovery vehicle D.O.T.: 2/ 1990 Original only 34,700KM/ 2960 hours with receipts short driver's cab with 3 seats 4X4 all-wheel drive vehicle 16 speed manual gearbox leaf suspension trailer coupling Wheelbase 3900mm 6 cylinder engine with 11967ccm displacement Tires 11R22.5 profile approx. 80% Strong cable winch at the rear with 5,000 kg pulling force Various stowage/ roller shutter boxes Unladen weight 11.965Kg Crane Palfinger PK7000 with cable winch 2.00m/ 3160Kg 3.60m/ 1800Kg 5.40m/ 1170Kg 7.20m/ 870Kg 9.20m/ 630Kg 11.20m/ 450Kg The vehicle has always stood in the fire brigade/recovery service hall and is in a well-kept condition. Export/ net price: 25.900 Euro All information without guarantee, errors excepted. Dcsln Rhljvikwtjzsg

Condition: used, Year of construction: 2010, Serial number: SZFTN1490ALD0xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19807 Specifications: Delnjv U Sfpo Rhlzocg - Eu-approved until 30.06.2025 - 3 axles - Lift on 1 and 3 - Air suspension - Ok tires - Internal length: Approx. 7.2-3 m - Frame set - Tool cabinet - Ready for delivery Description: 3 axles Istrail Plankjärre from 2009. Eu-approved and ready for delivery. Sold with frame set Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 5760 Total Weight: 27000 Payload: 21240 Width: 255 Length: 1000 Inside lenght: 725

Condition: excellent (used), Functionality: fully functional, mileage: 240,343 km, first registration: 11/2014, fuel type: diesel, color: white, fuel: diesel, emission class: euro6, suspension: steel-air, Year of construction: 2014, machine/vehicle number: VF620M863FB000251, Equipment: ABS, air conditioning, central locking, cruise control, hydraulics, Przedmiotem ogłoszenia jest samochód ciężarowy marki Renault z zabudową śmieciarki Semat Cena : 153 000 PLN vin: VF620M863FB000251 EURO VI Renault Gama D Wide 1wsza rejestracja: 2014/11/14 Przebieg: 240 343 km Skrzynia biegów: Automatyczna Allison Paliwo: Diesel Zawieszenie: resor - pneumat DMC: 27000 kg masa własna: 14375 kg ładowność: 12625 kg moc: 240 kW Zabudowa: Typ: Semat C338-06 Dcjln Rhlsv Ivw Aszeg nr : 143 480 data produkcji: 10-2014 Wymiary: długość: 9,30 m szerokość: 2,55 m wysokość: 3,45 m Wyposażenie: ABS blokada mostu dyferencjału elektryczne szyby elektryczne lusterka hydrauliczne wspomaganie kierownicy hamulec silnikowy hydraulika immobilizer komputer pokładowy klimatyzacja manualna kamera cofania oświetlenie robocze ogranicznik prędkości radio fabryczne regulowane zawieszenie światła rotacyjne tachograf tempomat MOŻLIWOŚĆ MONTAŻU ŁAP DO POJEMNIKÓW 1100L Zapewniamy: Serwis pojazdu po zakupie Naprawy eksploatacyjne zakupionego u nas sprzętu Transport w dowolne miejsce na świecie Na Państwa życzenie wykonamy: Wymianę filtrów i olei w samochodzie Wymianę filtrów i olei w zabudowie Usługa dodatkowa Jako lider na rynku Europy Środkowej specjalizujący się w sprzedaży pojazdów i urządzeń komunalnych, chcielibyśmy zaproponować Państwu skorzystanie z naszego wieloletniego doświadczenia w tym zakresie i sprzedaży za naszym pośrednictwem zbędnego sprzętu komunalnego W Państwa imieniu zajmiemy się: - kontaktem z klientem w kilku językach obcych - przygotowaniem dokumentacji sprzedażowej i posprzedażowej. - organizacją transportu drogowego i morskiego - organizacją dokumentacji celnej (odprawa celna, Eur 1, T1) - przygotowaniem pojazdu do sprzedaży Możliwość leasingu pojazdów starszych, nawet 18 letni. Jeśli chcesz poznać szczegóły skontaktuj się z nami.

Condition: used, Year of construction: 2011, operating hours: 835 h, filter area: 80 m², suction capacity: 7,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum filter for continuous operation. For plasma, laser, sandblasting, soda blasting and all types of dry dust. Brand: DEBUS / PIONIER Model: DES DZF-1 The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The device is in very good technical condition - only 835 hours worked year of production: 2011 Fan with a power of 5.5 kW. + noise silencer Efficiency up to 7000m3/h Filtration area - 80 m2 Connector diameter 300 mm Filter cartridges - 4 pcs. Electrical documentation available Unit dimensions: height - 3.40m Dcsln Rswdg Txjhlzeg total width: 1.40m x 1.40m stock no.: 0977

Condition: good (used), Year of construction: 2008, Functionality: fully functional, GENERAL Project No: 905673 Quantity: 1 pc. Manufacturer: SW (Schwäbische Werkzeugmaschinen) Type: BA W04-22 Control: Siemens 840 D Year of Manufacture: 2008 Condition: Used Machine Shifts approx.: 2-3 shift DESCRIPTION MILLING Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 14/14/20 m/s2 Feed force X/Y/Z 10000/10000/2×5000 N Linear glass scales X/Y/Z/A(U)/C1(C2)/W1(W2) Linear drive X/Y/Z Tool taper HSK-A 63 Max. speed milling spindle 17500 1/min Max. power at 10-40/100% duty ratio 35/26 kW Max. torque at 10-40/100% duty ratio 80/60 Nm Spindle diameter in front bearing 80 mm 2 pc. Horizontal milling spindle Spindle distance 400 mm Air-monitored tool clamping Pneumatic tool taper cleaning in milling spindle Torque support for multi spindle drilling heads Chain-type tool magazine 2×60 stations Max. tool diameter 80 mm Max. tool diameter without adjacent tools 160 mm Max. tool length 300 mm Max. workpiece weight 10 kg Chip-to-chip time 2,75 s Pallet changer 2 fold Max. workpiece weight per pallet 450 kg 2 pc. Swivel unit for clamping bridge Swivel unit NC-controlled 4 pcs. Rotary table NC-controlled (5th axis) – 2 pcs. per swivel unit Bridge dimensions 1030 mm Workpiece swing diameter 550 mm 2 Clamping bridge supports Hydraulic clamping 250 bar 4 pcs. Additional clamping circuit Air-monitored clamping of workpiece FURTHER EQUIPMENT IR-measuring probe Fully enclosed work area Automatic sliding door for loading area Light in working area Oil-/emulsion mist extraction unit Scraper-type chip conveyor Discharge hight chip conveyor 1200 mm Machine operates/operated with emulsion Internal coolant supply Flush gun Coolant unit with paperband filter High pressure pump 70 bar Modem for remote diagnosis and TeleService Tapping without compensation chuck Additional control panel for tool management Warning lamp GENERAL TECHNICAL DATA Air supply 6 bar Operating voltage 3×400/50 V/Hz Total power requirement 133 kVA Transport dimensions of the machine (LxWxH) approx. 3680x5100x3250 mm Space requirement of the whole equipement (LxWxH) approx. 4350x7000x3100 mm Machine weight approx. 14500 kg REMARKS Deln Rhju Diatslzocg We described the specified product as accurate as possible. As it is not a product manufactured by us, the mentioned data can deviate. Herewith, we point out that the mentioned data are are non-binding and ask you to check them during your inspection.

Condition: used, Year of construction: 1983, overall weight: 70,000 kg, power: 55 kW (74.78 HP), ELECTRICAL SPECIFICATIONS .. total power consumption: 55 kW DIMENSIONS / WEIGHTS .. total weight approx.: 70000 kg Doln Rhjurcdmolzocg Maximum wall thicknesses: Material up to approx. 450 N/mm² max. 22mm (steel) Material up to approx. 750 N/mm² max. 17.5mm (stainless steel) Maximum diameter : dished end approx. 5000 mm Basket arch bottom approx. 3200 mm Minimum diameter : dished end approx. 1200 mm Corner radius : Range 150 - 500 mm Largest corner radius 500 mm Clear width clamping bracket approx. 5800 mm Max. Sheet thickness clamping approx. 32 mm Electrical power : Main drive approx. 55KW Shifting drive approx. 1,5/9 KW Hydraulic unit approx. 11 KW additional pressure roller drive approx. 7,5 KW Accessories : Push rollers additional drive 2 lateral pressure rollers Form roller change console Central lubrication Clamping device oL 5033 Included : Tools for flanging : 1 piece standard flanging roller 4 pieces cast iron flanging rollers R85, R125, R150, R175 7 flanging rollers made of 1.2379 R225, R250, R300, R350, R400, R450, R500 New spare parts : New clamping plate bearing New threaded spindle with nut New form roller shaft

Condition: used, power: 127 kW (172.67 HP), color: orange, operation weight: 16,700 kg, Year of construction: 1978, Equipment: cabin, Power/Engine: 10,500 cm³ Chassis: Wheels Driver's Seat: Cabin Attachments: Shovel ID: 117995 Ready for immediate use 173 HP 6 Cylinders 17000 Kg Video link on YouTube: We always have a large selection of used vehicles in stock. You can find more of our selection at Non-binding offer, sale to businesses only, errors and prior sale excepted. Advertisements and company logos on vehicles may have been digitally edited in photos. Dcjlsv S Nrzjn Rhlzsg

Condition: used, Year of construction: 2011, Serial number: YG9SBB4384P03xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20054 Specifications: EU approval: Comes with new EU approval Model year: 2011 Mileage: Approx. 735,000 km Transmission type: Automatic Tires: See pictures Crane: FTG V13 crane from 2017 Support legs: Yes Weight: 14,950 kg Euro 5 engine Length: 1027 cm Width: 255 cm Wheelbase: 450/136 cm Curb weight: 14,950 kg Drivetrain: 6x4 Power: 730 hp Equipment: Sand spreaders Tool cabinet Trailer hitch 2 x compressor horns Extra lights Lightbar Refrigerator Bed Radio/CD Air conditioning/AC _____ Description: Scania R730 timber truck from 2011, equipped with FTG V13 crane from 2017. The truck has only had one owner and full service history is available from Scania. It comes with new EU approval before sale. Can be delivered at short notice. See video for more information. _____ Technical approved: Yes EU-approved until: 30.09.2025 Own weight: 7160 Total Weight: 27000 Payload: 11975 Width: 255 Dceln Rhlev U Svnszog Length: 1027

Year of construction: 2011, Condition: refurbished (used), Kuka KR270 R2700 Ultra Refurbished Doljhlaqkjn Rhlzocg 17000 operating hours Also available in other sizes and colours!

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical specifications: Roller carriage length 3200 mm Roller carriage cutting length 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at the width stop 1250 mm Length stop on the cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Djlsuvab Ren Rhlzocg Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: 7.5 kW motor Tele-Digit length stop With central digital, wireless 0.1 mm readout in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° - 90° on the aluminum sliding table, length and angle measurements adjustable via scale; For cutting to lengths up to 1375 mm with length compensation for preferred angles of 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, and 67.5°. Includes splinter wood, wall mount, and an additional factor scale for easily calculating incorrect miters for different workpiece widths. Swivel device for the cross slide. Quick, ergonomic sliding into the parking position. 2 clamps for trolleys. Current list price: €46,254.- Availability: Short-term. Warehouse location: Hochheim.

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table Dceln Rhlshp Rdlezog High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: used, mileage: 470,000 km, Year of construction: 2010, Serial number: YV2AG40D6BA70xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19130 Specifications: Djln Rhlsvyfw Aszscg Model year: 2010 Mileage: Approx. 470,000 km Transmission: I-Shift Tires: See pictures Length: 845 cm Width: 250 cm Wheelbase: 460/136 cm Curb weight: 13,050 kg Axle configuration: 6x4 Horsepower: 551 hp Tool cabinet: Yes Compressor horn: Yes Rotor lamp: Yes Trailer hitch: Yes Rear view camera: Yes Damage: Small dent behind the cabin, shown in pictures Bed: Yes Radio/CD: Yes Climate/AC: Yes Description: Volvo FH540 asphalt truck from 2010, in good condition and ready for delivery. It has 470,000 km, I-Shift transmission system, 551 hp and is equipped with, among other things, a tool cabinet, compressor horn, rotor lamp, reversing camera, trailer hitch and climate/AC. Small dent behind the cabin, shown in the pictures. Ready for quick delivery. Km: 470000 HK: 550 Technical approved: Yes EU-approved until: 22.01.2026 Own weight: 13050

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Arch milling protection hood Anodized aluminum sliding carriage Dcjln Rshp Rcyohlzsg Telescopic miter fence Aluminum stop jaws

Condition: used, mileage: 396,000 km, Year of construction: 2011, Serial number: XLEP6X2000527xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19984 Specifications: - Km: Approx. 396,000 - Transmission: Automatic - Okay tires - Air suspension - Euro 5, 400 hp - Engine brake - 6x2, Turn 3 - Ekopres Medium XL construction - Rotor beam - Tool cabinet - Rear view camera - 1 chamber - Weight - Radio/CD - Air conditioning/AC - Videos - Ready for delivery Description: Scania P280 4x2 Compactor truck. 6x2 with Ekopres Medium XL on construction. The truck has been maintained. Ready for delivery. Km: 396000 HK: 399 Technical approved: Yes EU-approved until: 13.11.2025 Own weight: 16200 Total Weight: 27000 Payload: 10725 Width: 255 Length: 924 Euro: 5 Djlev U S E Nen Rhlzocg Gearbox: Automatic