Used All-Kor Akb S400 for sale (56,239)

Condition: new, TECHNICAL SPECIFICATIONS - 2.5 tonnes - Fuel: Diesel - Model: 4x4 - Engine: Kubota V2403 StageV - Fork length: 1220 mm - Mast: Triplex 4.35m AVAILABLE OPTIONS Bwob Hbhomxkdherpjl - Side Shift - OPS System - Suspended seat

Year of construction: 2019, Condition: good (used), The sample material is weighed and placed into a sample tray. The sample tray itself is part of an integrated reactor within the HydroTracer. A heater warms the sample – temperatures between 50 °C and 210 °C are freely selectable. The water evaporating from the sample reacts with the reagent in a cooled area and water is transformed into hydrogen. Other volatile substances will condense at the cooled surfaces within the vessel. The concentration of hydrogen gas is measured. It is a measure for the amount of water in the reactor. The concentration of hydrogen is a measure of the sample humidity. The percentage of water of the sample is calculated by division with the sample weight. The HydroTracer is controlled via a PC program. The program gives the user precise instructions so that operational errors are largely eliminated. The measurement is simple and requires only a few steps, each measurement is needed about 2 minutes of working time. The operation is supported by image-assisted program instructions. This method shortens the training period considerably. In principle, even an inexperienced user will be able to perform an accurate measurement. Test Time:10 – 45 Minutes Test Temperature:50 – 210°C (adjustable in 1°C steps) Sample Weight:0.01 – 50 g Reagent:CaH2-Pads / CaH2 granular form Measuring Range:0.2 – 25 mg (absolute)0.0005 – 5% (relative) Accuracy:Measuring error < 2% Resolution:1 ppm (0.0001%) 0.1 – 0.8 mg (depending on measuring range) Ambient Conditions:-10…40°C / 90% rH (not condensing) Power Supply:100 – 240 VAC (50/60 Hz) / 1000 W Weight:6.4 kg Dimensions:290 x 180 x 260 mm (H x W x D) Interface:USB Bwebok Nzvve Hbhrpsl System Requirements:PC with min. WIN 9-10-11 SP 1 or later

Condition: ready for operation (used), Forklift truck Manufacturer: Jumbo Type: J60 DC12 Diesel Year of manufacture 1994 Payload: 6,000 kg Own weight: 9,260 kg Lifting height: 4300 mm approx. 25,000 operating hours Sold due to switching to wheel loader Bwjb Hbjvtwuajhrpel All service and lubrication intervals verifiably completed according to the inspection book! All filters (hydraulic, fuel, converter, air) replaced annually. Engine oil filter including oil every 250 operating hours. Only B0 was used as diesel fuel. (no B7) immediately available - fully functional Location: Austria, near St. Pölten

Condition: new, machine/vehicle number: 9147, Year of construction: 2024, operating hours: 1 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 1,950 mm, fuel type: diesel, mast type: triplex, construction height: 3,440 mm, Equipment: cabin, sideshift, Int. no.: 9147 Device details: Year of construction : 2024 Lifting capacity : 5000 kg Lifting height : 6000 mm Read operating hours : 1 h Free lift : 1950 mm Mast type : Triplex Mast height : 3440 mm Length/width/height : 3700 / 2090 / 2570 mm Operating weight : 10360 kg ---- Equipment: * Canopy * 3rd valve * 4th valve * Full cab * Full free lift * Soot filter * Heating * Front working lights ---- Further equipment information: ---- The operating hours are generally measured hours. We will be happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We are happy to buy your OLD. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. Bwjb Hjtw Ay Tebhrpol We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: new, Year of construction: 2024, Genie GS4390 diesel scissor lift with all-wheel drive, new, used, demonstration machines available Bweb Hjrh Emtebhrpsl

Condition: good (used), Year of construction: 2002, Professional automatic bottle labeling machine for paper cut labels. Manufacturer: P.E. (Italy) Model: FUTURA N Type: 24T.1170.1S.1E Capacity: 25,000 bph Year of manufacture: 2002 Bobsvbq Txo Hbhrpowl Installed power: 12 kW Weight: 4200 kg

Condition: new, TECHNICAL SPECIFICATIONS - Lift capacity: 3.5 tonne - Fuel: Diesel - Model: AWD (4x4) - Engine: Kubota V2403 StageV - Fork length: 1220 mm - Mast: Triplex 4.35m AVAILABLE OPTIONS - Side Shift - OPS System Beb Homxkm Uebhrpowl - Suspended seat

Condition: good (used), Nearly all SCREEN, FUJI, AGFA, HEIDELBERG CTP Spareparts second hand, tested and new All offers are subject to prior sale Bsb Hbhodpxbgorpewl

Condition: ready for operation (used), Year of construction: 2017, PARK RANGER 2150 YEAR OF CONSTRUCTION 2017 ONLY 230 OPERATING HOURS On customer order with cabin, heating, StVZO, front sweeper shortened to 1 meter machine width (if required, the front sweeper can also be supplied in original width 122 cm. Bjb Hevgq A Djbhrpowl ), spreader with parking support 1-6 meter spreading width. If required, a vacuum sweeper with 3 brushes can also be purchased for an additional 5000 €.

Condition: new, machine/vehicle number: 9132, Year of construction: 2024, operating hours: 2 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,365 mm, Equipment: cabin, sideshift, Incl. manufacturer's warranty 12 months or 1000 operating hours. Int. no.: 9132 Device details: Year of construction : 2024 Lifting capacity : 3500 kg Lifting height : 4700 mm Read operating hours : 2 h Free lift : 1500 mm Mast type : Triplex Mast height : 2365 mm Length/width/height : 4300 / 1600 / 2350 mm Operating weight : 5910 kg ---- Equipment: * Canopy * 3rd valve * 4th valve * Full cab * Full free lift * Front working lights * Rear working lights ----- Attachments: * Sideshift * Load protection grid ---- Further equipment information: All-wheel drive ---- The operating hours are generally measured hours. We are happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We are happy to buy your OLD. Bebstw Aq Es Hbhrpewl Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: ready for operation (used), Machine can spray oil or slurry on products to aid seasoning. Mesh conveyor belt is not included but we can also supply a new one. The system has eight spraying heads four on the top snd four at the bottom to fully cover the product in oil. Bwob Hbhou Rgnnjrpjl

Year of construction: 2022, operating hours: 500 h, Condition: as good as new (ex-display), machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Bob Hjqabm Eebhrpjwl Throughput / capacity depending on material and purpose. Price on negotiation!

Year of construction: 2024, Condition: new, We have shredders and other recycling machines for all types of recycling in stock in Leingarten! From copper recycling to plastic recycling, you can purchase all machines from us. Please feel free to ask us. ‼️sofort ready for collection ‼️ in stock ‼️ ‼️Gerne you can watch videos on our website anschauen‼️ Twin-shaft shredder 80 cm shaft width 2 motors 18.5 kw each Very powerful shredder for tires, steel, wood, cable, plastic, etc. - all-purpose shredder. Stable, durable - quality-tested by Josan. In stock with us. Net 33.000€ Errors excepted. Pictures/price may vary Bwjbep E Egps Hbhrpjl

Condition: excellent (used), Nearly all Suprasetter Spareparts for A52/74/75/105 and Classic and Suprasetter Laser Moduls, second hand, tested Bjb Heflwxvsbhrpswl All offers are subject to prior sale

Condition: used, machine/vehicle number: 2482668, Year of construction: 2021, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: triplex, power: 37 kW (50.31 HP), color: red, fuel: diesel, Equipment: UVV, Technical Data Bwob Hbhrjqyapropsl - Year of construction: 2021 - Lifting height: 4.00 m - Load capacity: 3000 kg - Total weight: 4400 kg - Engine power KW / PS: 37 / 50 - Drive: Diesel 2WD - UVV: new - Forks: 1.60 m (can be changed to 1.20 m on request) functional, general signs of wear, Triplex lift mast FLT40 with free lift, 2WD drive, full cab, off-road tires

Condition: new, machine/vehicle number: 9000, Year of construction: 2024, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,365 mm, Equipment: cabin, sideshift, Incl. manufacturer's warranty 12 months or 1000 operating hours. Int. no.: 9000 Device details: Year of construction : 2024 Lifting capacity : 3500 kg Lifting height : 4700 mm Read operating hours : 1 h Free lift : 1500 mm Mast type : Triplex Mast height : 2365 mm Length/width/height : 4300 / 1600 / 2350 mm Operating weight : 5910 kg ---- Equipment: * Canopy * 3rd valve * 4th valve * Full free lift * Front working lights * Rear working lights ----- Attachments: * Sideshift Bwsb Hetw Aibebhrpjl * Load protection grid ---- Further equipment information: All-wheel drive---- The operating hours are generally measured hours. We are happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers available for you immediately. Also for hire, of course! We will gladly buy your OLD. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,400 h, Drill ready to work, full rod magazine. Possibility of preparing a complete set. Bobevll Aps Hbhrpewl

Condition: new, Year of construction: 2025, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Bob Hbhemdq Tpsrpswl Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2005, Condition: good (used), All spare parts for Heidelberg Prosetter 52/74/102 633 Hz. or 750 Hz. mirror Motor (second-hand or refurbished), as well as all other electronic and mechanic parts. LVDS-Interface-Cards Bob Hbhectky Horpewl

Condition: new, machine/vehicle number: 8064, Year of construction: 2022, operating hours: 10 h, load capacity: 3,500 kg, lifting height: 4,800 mm, free lift: 1,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,592 mm, Equipment: cabin, sideshift, Int. no.: 8064 Device details: Year of construction : 2022 Lifting capacity : 3500 kg Lifting height : 4800 mm Read operating hours : 10 h Free lift : 1550 mm Mast type : Triplex Mast height : 2592 mm Length/width/height : 3100 / 1630 / 2433 mm Operating weight : 6120 kg ---- Equipment: * Canopy * 3rd valve * 4th valve * Full cab * Full free lift * Heating * Front working lights ----- Bsb Hbetw Aw Ejhrpswl Attachments: * Sideshift * Load protection grid ---- Further equipment information: ---- The operating hours are generally measured hours. We will be happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We are happy to buy your OLD. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: new, Year of construction: 2025, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Bjb Hbhremdqcnepowl Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Omicron Material Length: 5230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2025, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4.5 m Linear Unit: ProfiStop Alpha Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES. Bobomdq S Ss Hbhrpowl

Condition: new, Year of construction: 2025, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Bwob Hbhrsmdqc Sopjl • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 14 m Linear Unit: ProfiStop Omicron Material Length: 1323 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2025, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). Bsbsma Azwj Hbhrpowl • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2025, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. Beb Hbhrjmdqfbspewl • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • Industrial ball-screw saw actuation system with servo motor feed control. • High-flow, high-capacity, no leaks coolant and drainage system. • Bundled / multi-bar cutting and counting (optional). • Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 4 m Linear Unit: ProfiStop Omicron Material Length: 3230 mm Pushing capacity: 60 – 120 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.