Used All-Kor Akb S15 for sale (56,254)

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit, used, good condition, 100% functional Debei D T D Dsvdi Hzscg

Year of construction: 2025, Condition: new, Functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: Dcebvdsq Nfbhoi Hzsg - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process.

Year of construction: 2014, Condition: good (used), The machine is from year of manufacture 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round - 75 mm Debvoh Awzmjdi Hzjcg Rectangle - 60 mm Saw blade dimension ø 285 x 2,0(T) x 1,7 (t) mm T = waste; t = thickness ; bore 32; 4x11 at 63 mm Blade speed inverter monitored 30- 150 rpm blade motor 7,5 kW Hydraulic system 1,5 kW Coolant system Oil mist lubrication Blade feed system servo motor & ball screw material support 1.200 x 5.200 mm Bar feed system: servo motor and ball screw Automatic index single stroke 6 - 600 mm Multiple stroke up to 3.000 mm Automatic chip conveyor Chain conveyor Machine weight, incl. table 2.800 kg Length tolerance +/- 0,1 mm Cutting accuracy +/- 0,1 mm Remaining piece standard 75 mm Loading capacity 13 x ø 75 mm bars Max loading width. 1.000 mm Accessories: chip conveyor, air cleaning, loading magazine (still under power in production)

Condition: used, Year of construction: 2010, machine/vehicle number: 13820, - Manufacturer MAKOR - Type. CSRT, Loader Dsbeumvtwjvdi Hzscg - Year of construction 2010 - Max. Part width 180 mm - Min. part length ~ 1,000 mm - Max. Part length ~ 6.500 mm - Length of the longitudinal conveyors ~ 6500 mm - Distance between the lifting rakes centre - centre 400/530/700/770/1150/1270 mm - Length ~ 6.500 mm - Weight 750 kg - Incl. control unit - In stock in Blomberg

Condition: used, Year of construction: 2021, In this offer you purchase a used digital on demand textile printing system "Kornit Storm HD6" Object of sale: 1 x Kornit Storm HD6 incl. Chiossi E Cavazzuti Duo 1200 drying tunnel You will receive a tested and fully functional system Further information will follow Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Dcjbvdjtr Dv Tsi Hzog Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Dobvdiovzat Uo Hzscg Technical data for installation: Number of rack rows: 01 pcs. Length of each rack row: 119,175 mm Number of fields per rack row: 39 pcs. Number of levels plus floor level: 02 pcs. Technical data for volume: Pallet spaces per field: 06 pcs. Number of pallet spaces per row: 234 pcs. Total number of pallet spaces: 234 pcs. The scope of delivery includes: 40x pallet rack stands, used Material color: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) 2,000 mm high 1,100 mm deep 156x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg with uniform distributed load 312x integrated locking pin, new To secure the longitudinal beams against accidental lifting 160x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 80x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground 01x load plate with details of field and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, Balluff BIS00T3 evaluation unit BIS V-6102-019-C001 SN:1650HU, unused, 100% functional, scope of delivery as per photos Dcjbvdiel Ech Ee Hzsg

Condition: new, Year of construction: 2025, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Dcebvdi Heq I Nw Iszeg

Year of construction: 1996, Condition: excellent (used), machine/vehicle number: MBMA2021, Technical data: 1 steel column slewing crane NL 250 KG Available 3 times Payload at full radius 250KG payload Height: approx. 3.5m, UK boom: approx. 2.95m Projection: approx. 2.2 m, hook height: approx. 2.5 m Weight completely approx. 350KG with 250kg chain hoist with floor control Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Good condition, see pictures Item location is 75053 Gondelsheim Debvdioqwn Ukj Hzjcg Only the crane system shown in the pictures is sold Shipping by courier or collection by appointment

Condition: used, Year of construction: 1972, bore capacity in steel (diameter) 40 mm throat 340 mm bore stroke 170 mm Dcobjv Rgx Njvdi Hzsg table surface area 560 mm

Year of construction: 2001, Condition: used, SECOND-HAND H.F. GENERATOR ELETTRONICA CAVALLO MOD. GAF 50KW - CE RULES - Double exit - Year 2001 Dsbvdismzbkks Hzjcg

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 28,425 mm Number of fields per rack row: 09 pcs. Number of levels plus floor level: 02 pcs. Technical data for volume: Pallet spaces per field: 06 pcs. Number of pallet spaces per row: 54 pcs. Total number of pallet spaces: 54 pcs. The scope of delivery includes: 10x pallet rack stands, used Material color: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) 2,000 mm high 1,100 mm deep 36x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg with uniform distributed load 72x integrated locking pin, new To secure the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 20x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground Dcobvdi Hsvzappezog 01x load plate with details of field and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Technical Specifications: Tool Holder: MT 3 Drilling Capacity: 32 mm Speed Range: 65 - 1750 rpm Spindle Stroke: 160 mm Throat: 293 mm Column Diameter: 115 mm Motor Power: 1.1 kW Features: - Machined base with T-slots - Emergency Stop Button - Drilling Depth Stop - Reversible Travel Dcjbvdijv Av Tms Hzsg

Condition: new, Year of construction: 2025, power: 300 kW (407.89 HP), A ball mill is a key equipment in the grinding process of barite. It is designed to grind and blend solid or hard materials into smaller pieces, particularly powder. In a barite grinding plant, ball mill is often used for grinding barite into an ultrafine powder for various applications. Here are key features and aspects of a ball mill used for barite grinding in a plant: 1. Mill Structure: - The ball mill for barite grinding typically consists of a horizontal cylindrical shell with ends that are flanged and bolted on. The ends may contain openings for feeding and discharging the barite. 2. Grinding Media: - Steel or ceramic balls are commonly used as grinding media in the ball mill. The grinding media helps in the grinding process by reducing the size of the barite particles. Dcjbvdieq Ngafs Hzeg 3. Rotation: - The mill rotates on its horizontal axis. The rotational motion of the mill, driven by a motor, causes the grinding media to cascade and grind the barite. 4. Feed and Discharge: - Barite is typically fed into the ball mill through a hopper or a conveyor. The ground barite particles are discharged from the mill through a discharge end. 5. Control System: - Modern ball mills are equipped with control systems to monitor and regulate critical parameters, such as mill speed, feed rate, and temperature. This allows for precise control of the grinding process. 6. Size Reduction: - The primary purpose of the ball mill is to reduce the size of barite particles. Grinding occurs as the barite is subjected to the impact and friction forces of the grinding media. 7. Classification: - Depending on the desired fineness, a classification system may be integrated into the ball mill to separate fine particles from coarse ones. This ensures that the final product meets the required specifications. 8. Dust Collection: - A dust collection system may be incorporated to capture and collect fine particles generated during the grinding process, ensuring a clean and safe working environment. 9. Liners: - The interior of the ball mill is often lined with wear-resistant materials, such as steel or rubber, to protect the mill shell from abrasion and ensure longer equipment life. 10. Application in Barite Processing: - The ball mill in a barite grinding plant is a crucial piece of equipment for processing barite ore into a fine powder. This powder is used in various industries, including oil and gas drilling, coatings, and pharmaceuticals. 11. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are typically incorporated into ball mills to ensure safe operation. The specific design and features of a ball mill for barite grinding can vary among different manufacturers and applications. It is essential to follow proper procedures and guidelines for the operation and maintenance of the equipment to ensure optimal performance and longevity.

Year of construction: 1972, Condition: used, machine/vehicle number: WIT, Technical data: 1x Vetter / Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload Several cranes available (7 pieces) Height: approx. 3.75-4m Outreach: 3+3.9m Weight complete approx. 700KG incl. cable towing, undercarriage etc Debverwkbuedi Hzjcg Swivel range 360°, connection to 400V 16A Optionally also available with 250KG chain hoist Crane is disassembled and immediately available Item location is 75053 Gondelsheim Further cranes are available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PRJ037887, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, rotational speed (max.): 13,000 rpm, distance table to spindle center: 740 mm, number of slots in tool magazine: 24, No reserve price - guaranteed sale at the highest bid! Machining center including dividing head TECHNICAL DETAILS X-axis (longitudinal stroke): 600 mm Y-axis (transverse stroke): 400 mm Z-axis (vertical stroke): 600 mm Distance spindle-table (min./max.): 140/740 mm (with spacer, item special option 2) Control: Heidenhain iTNC 530 with smarT.NC Machine table Table width: 750 mm T-slots according to DIN 650 (width/distance): 14 x 80 / 100 mm Middle T-slot as guide slot: 14 H7 mm Table load: max. 500 kg Dsbvdi Hov Rn Rmozscg Main spindle drive Spindle type: Conventional main spindle with 4-way fixed-loose bearing and lifetime grease lubrication Bearing seal: Sealing air seal with additional splash ring Tool holder: SK 40 (according to DIN 69871) Pull bolt: DIN 69872-19 Blown air through the spindle center: available Spindle drive motor Type: 4-pole, frequency-controlled three-phase asynchronous motor with external air cooling (maintenance-free) Drive power (25% duty cycle): max. 13 kW Torque (25% duty cycle): max. 55 Nm Speed range continuously variable (25% duty cycle): max. 13,000 rpm Tool magazine Magazine type: plate Magazine positions: 24 Tool diameter (fully loaded): max. 100 mm Tool diameter (with free adjacent positions): max. 200 mm Tool length (at Ø 25): max. 350 mm Tool weight: max. 4 kg Tool change time: approx. 1.9 s Chip-to-chip time: approx. 3.9 s MACHINE DETAILS Air pressure: min. 6 bar Hydraulics: max. 6.8 l/min at 140 bar Connection power: 20 kVA Width: approx. 2,700 mm Depth: approx. 1,780 mm Height: approx. 2,785 mm Machine as transport unit: approx. 3,500 kg EQUIPMENT - Chip conveyor - Coolant -

Condition: used, Gainsborough bagger and All-Fill powder depositor. Dobvdovvpphei Hzscg

Condition: good (used), Technical data for the pallet racking system: Rack system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length of each rack row: 16,325 mm Number of fields per rack row: 05 pcs. Number of levels plus floor level: 02 pcs. Technical data for volume: Pallet spaces per field: 06 pcs. Number of pallet spaces per row: 30 pcs. Total number of pallet spaces: 30 pcs. The scope of delivery includes: 06x pallet rack stands, used Material color: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. cross and diagonal struts, Foot plates The stands are pre-assembled (screwed framework) 2,000 mm high 1,100 mm deep 20x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Dcebvdisvzam Ij Hzjg Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg with uniform distributed load 40x integrated locking pin, new To secure the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x leveling plate, used Design: completely galvanized for leveling the shelf supports that are placed on uneven ground 01x load plate with details of field and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Spindel taper SK 40 Travel X-Axis 500 mm Debvdi Hjin Dktszocg

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, Djbvdierqzgkj Hzjcg the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Year of construction: 1997, Condition: excellent (used), machine/vehicle number: W126, Technical data: 1 steel column slewing crane NL 125KG with chain hoist Payload at full radius 125 KG / 0.125ton payload Height: approx. 3.55m UK boom: approx. 3.3m Projection: approx. 5.2m Hook height: approx. 2.95m Total weight approx. 800kg including dowel plate 72x72cm Dobvjp Arr Iedi Hzscg with steel ST chain hoist 125Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: good (used), Year of construction: 2021, Functionality: fully functional, We are offering our Kornit Avalanche HD6, built in March 2021, for sale. The machine is first-hand, has always been well-maintained, and is regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Avalanche HD6 • Year of manufacture: March 2021 • First-hand • Location: Germany • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Avalanche HD6. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information about the DTG printing machine: • The Kornit Avalanche HD6 is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. The scope of delivery includes: • Kornit Avalanche HD6 DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is available at any time by appointment. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- We are offering our Kornit Avalanche HD6, manufactured in March 2021, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Avalanche HD6 • Year of Manufacture: March 2021 • First-hand ownership Dsbvdov Scnioi Hzecg • Location: Germany • Regularly serviced (maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Avalanche HD6. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional Information: • The Kornit Avalanche HD6 is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in the sale: • Kornit Avalanche HD6 DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Year of construction: 1992, Condition: like new (used), machine/vehicle number: Div1, Technical data: Debvdi Hjng H T Uszscg 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Year of construction: 2022, Functionality: fully functional, We are offering our Kornit Atlas Max, built in March 2022, for sale. The machine is first-hand, has always been well-maintained, and regularly and professionally serviced under a maintenance contract. Machine details: Dcjbov Sci Tjvdi Hzsg • Model: Kornit Atlas Max • Year of manufacture: March 2022 • Location: Germany • First-hand • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Atlas Max. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in delivery: • Kornit Atlas Max DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is possible at any time by arrangement. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- We are offering our Kornit Atlas Max, manufactured in March 2022, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Machine Details: • Model: Kornit Atlas Max • Year of Manufacture: March 2022 • Location: Germany • First-hand ownership • Regularly serviced (Maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Atlas Max. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in the sale: • Kornit Atlas Max DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Year of construction: 2010, Condition: excellent (used), machine/vehicle number: MBMA26, Technical data: 1x Vetter PS column-mounted slewing jib crane NL 250KG incl. chain hoist with fine lift Payload at full outreach 250KG / 0.25to payload Height: approx. 3m UK jib: approx. 2.55m Outreach: 3m Hook height: approx. 2.1m Weight complete approx. 350KG incl. bolts, cable drag, trolley, end cap etc. incl. chain hoist Swivel range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire Djbvdi Hst T T Thozocg See pictures Shipping by forwarding agent or collection by appointment only