Used All-Kor Akb S15 for sale (56,273)

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm Dcjbjkzk Hve Hh H Tvog flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: excellent (used), Year of construction: 2014, Year of manufacture: 2014 Manufacturer: Challenger Type: Microcut MN 430 3-axis vertical machining center Control: FAGOR 8055 M i/A control Spindle: 8000 rpm Travels: X 760 mm, Y 430 mm, Z 390 mm Max. rapid traverse: 24 m/min TABLE AREA: Dimensions: 900 mm x 410 mm T-slots: 16 mm x 4 mm x 100 mm Max. payload: 350 kg TOOL CHANGER Max. tool length: 200 mm Max. tool diameter: 100 mm Dcob Hhov Rbnfo H Tveg Max. tool diameter with free adjacent positions: 130 mm Max. tool weight: 8 kg Tool change time: 10 seconds Max. number of tools: 24 (upgrade from 16 to 24)

Condition: excellent (used), Industrial Washing Machines Ltd washing machine for Dolav Bins / Pallet Boxes Type: DC20 DOLAV WASHER Serial number: 634-DC20 A/135/02R Year of construction: 05/12/2005 Dcob Hh Hov T D Awj Tvsg Inside dimensions: 1500 mm x 750 mm x 1200 mm Total dimensions: 2300 mm x 2000 mm x 2500 mm. Heat source is steam or hot water supply

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg dimensions of the machine ca. 2600 x 2200 x 1800 mm Dcob Hh Hot Tqw Dj Tvog - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: used, Year of construction: 2001, Technical data: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Dob Hheraz S He H Tvjcg Tapping capacity in ST 60: M24 Thread cutting capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feed rates: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined base with T-slots - Feed device - R- L- run - Thread cutting device - Emergency stop button - Drill chuck - vice - Machine wedge shoes - Swivel machine table - Cube table - Base plate with T-slots - Machine lamp

Condition: ready for operation (used), Allmatic NC 125 High-Pressure Vice Jaw width: 125mm Clamping width: 214mm With base plate for vertical work. Total length without base plate: 450mm Dceb Hh Hswc At Es Tvjg Total length with base plate: 505mm Height: 145mm You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending Djb Hhekzk Exe H Tvecg - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS

Condition: excellent (used), Year of construction: 2017, ALZMETALL 5-axis CNC Vertical Machining Centre Type:GS600 E/5 Year:2017 Control:HEIDENHAIN TNC640 XYZ travel:460x600x400mm Spindle speed:18000rpm Spindle taper:HSK-A63 Toolchanger:76atc Rotary table:400x400mm A-axis:±140° Dob Hh Howb A A Re Tvjcg C-axis:360° Max. table load:500kg Distance from spindle to table top:150-550mm Machine weight:6800kg Only 5800 working hours With Renishaw Reason for sale: Factory is considering automating production, and the automatic fms system is not compatible with the machine Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Year of construction: 2016, Condition: as good as new (ex-display), machine/vehicle number: F901/37, Technical specifications: 1 ABUS LS pillar jib crane NL 250KG Payload at full radius 250KG / 0.25to payload Height: approx. 3.9m, UK boom: approx. 3.4m Outreach: approx. 2m, hook height: approx. 3.05m Weight complete approx. 450 kg with 250Kg Abus chain hoist with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 270° Crane is dismantled and packed on a pallet Inspection book is available Very good condition, see pictures Location is 75053 Gondelsheim Dcob Hom Tg Duoh H Tvog Only the crane system shown in the pictures is being sold Shipping by forwarding agent or collection by appointment

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Deb Hh Hev Dirls Tvocg Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Condition: used, Year of construction: 2009, cutting diameter 290 mm dimensions of saw-band 3100 x 27 x 0,9 mm cutting width 320 mm cutting speed 20 - 100 m/min 290 mm stroke back stop 290 mm cross-slide 290 x 320 total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,7 x 1,0 x 1,5 m Band saw - semi-automatic - double miter Deb Howb Hzqeh H Tvscg - infinitely variable band speed

Condition: excellent (used), Model: PHT 140 400 vibrating trough A metal detector Height: 140 Debjv A Tzbj Hh H Tvocg Width: 440 Power: 30kW

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Suitable for particularly small bending diameters Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Mobile control panel with two digital displays for the infeed rolls Straightening rolls suitable for bending angle iron as standard special accessories: Dcebecf D Rbs Hh H Tveg Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: good (used), Functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Djb Hhev S H Tcj H Tvocg Table surface, 880 x 670 mm--- throat depth: 385 mm---

Year of construction: 1998, Condition: excellent (used), machine/vehicle number: BS605, Technical specifications: 1 Pfaff column slewing crane NL 250KG with 110KG compressed air cable Payload at full radius 250 KG / 0.25to payload (steel construction) Height: about 4.2m UK outrigger: approx. 3.3m Projection: approx. 3.5m Hook height: approx. 2.8 m Dcsb Hheiptyae H Tvsg Weight complete approx. 700 kg with 110 kg Demag compressed air cable Pivoting range 270° Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Dcjb Hh H Toi Tvv Ajvog Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Condition: good (used), Year of construction: 1998, CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture: 1998 Technical specifications: X: 600 mm Y: 400 mm Z: 600 mm Table: 750 x 450 mm Dcobsv Rnyze Hh H Tvsg Main spindle: 10,000 RPM Control: Siemens Sinumerik

Year of construction: 2005, Condition: good (used), GALLUS TCS 250 (4-color Offset+ 1 x Flexo coating)  Year of construction: 10/2005 Deb Hh Hjlua Hio Tvjcg  Unwind  Rewind  Offset printing units: 5 printing units (due to defective control unit, power supply, dampening unit motor not fully functional)  Coating unit: 1 flexo printing unit for coating  Punch: 1 x flat punch  size: max 270mm  size: min. 166mm  Flat bed die cutting unit  Software and controller version: V01

Year of construction: 2016, Condition: used, Print Width: Up to 340 mm Maximum Print Speed: Up to 200 m/min Material Unwinder - Front loading - Transport device with tape tension measurement - Max roll diameter: 1000 mm - Pneumatic spindle - Controlled unwind tension via adjustable dancer - Adjustable unwind tension - End of roll detection - Joining table - Ultrasonic edge control - Mobile touch screen control panel - Centralized machine infrastructure control Corona Treatment - 1.5 kW generator - Pre-treatment head - Includes exhaust fume outlets Multi-process base unit - Robust construction with granite base - Accommodates two process stations - Two base platforms for flexo printing or die-cutting groups - Manual diagonal register adjustment for each station - Includes paper path extension in the last station for varnishing - Interface for connecting cooling water and compressed air - Includes decentralized control Flexo Printing Unit Dsb Hhewcc A Ho H Tvocg - Flexo printing unit with aluminum sleeve cylinder - Refrigerated counter-print cylinder - Direct servo drive for print and counter-print cylinders Rotary Screen Printing Unit - Dual servo drive for format length adjustment and correction Upper Rails for Multi-Process Unit - Upper rail without control interface, compatible with laminating devices and waste rewinders. UV Drying System (9 positions) - Continuous power control relative to machine speed Die-cutting unit Rotary Die-Cutting with Front Loading (with cutting depth adjustment) Waste Rewinder Plus

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder Dcjb Hjv N D H Ueh H Tvjg -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Condition: good (used), Functionality: fully functional, bending angle: 180 °, total length: 7,000 mm, total height: 1,500 mm, total width: 2,000 mm, overall weight: 7,500 kg, pipe diameter: 133 mm, wall thickness: 6 mm, shaft diameter: 82 mm, Pipe bender , max 130mm wall 6mm , very many accessories Dob Hh H Tjucprdovecg

Condition: good (used), Load capacity: 125 kg DEMAG Dob Hh H Tshinkyovjcg -Outreach: 4000mm -total height: 3500 mm

Condition: good (used), Format: 500x500mm Dcob Hegt Un Soh H Tvog

Condition: good (used), Load capacity: 125 kg Dcsb Hh Hoixl U Ts Tvjg boom length: 3200 mm working length: 2600 mm total height:: 3300 mm

Condition: good (used), Strip length: 1250 x 650 mm Dceb Hh H Tsi D Dz Hevog Welding surface: 1000x700mm