Used Valtra/Valmet 6000 for sale (2,183)

Condition: good (used), machine/vehicle number: 48653545275734, Year of construction: 2018, operating hours: 1,466 h, load capacity: 1,600 kg, lifting height: 6,000 mm, overall weight: 2,000 kg, enginetype: Electric, manufacturer: Toyota Hfjdpsw Ry Ihofx Achsi

Condition: like new (used), The stretchMASTER 6000 can straighten steel bars up to 6 meters in length. The cross-sections that can be processed are as follows: round steel 6–30 mm, flat steel 4–12 mm, and square steel 8–25 mm, as well as 12–60 mm for flat steel. The straightening process relieves internal stresses in the material, resulting in a smooth and clean surface that is ideally suited for galvanizing or painting the parts. Furthermore, after galvanizing, there are no surface imperfections such as scaling, pitting, or flaking, and the zinc layer can penetrate deeper into the material, resulting in a significantly better finish after galvanizing. Hfedpfjzb Rugex Achoi Available from week 30.

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: Max Workpiece: Ø 900 mm x 1000 mm Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Hsdpfx Acev Tvivshefi Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Hfodsttri Tepfx Achji Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,817 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, punching force: 22 t, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser on hours: 71,637 h Operating hours: 80,188 h EQUIPMENT - Sturdy C-frame - Linear guide with integrated magazine - Maintenance-free three-phase servo motors - Programmable hold-down for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser station - Ejector cylinder at the laser chute - Programmable cutting gas pressure control - Laser cutting head: 5'' lens, quick-change system, height control - Multi-beam light barriers - Quick shut-off hydraulics - Extraction system - Compact dust extractor - Protective device against stray radiation at the cutting head - Brush table - Sign function / rapid beading - Softpunch - Small parts blow-out device - Repositioning cylinder - Warp detection - Chip conveyor Hfedpfsy Iz H Ijx Achsi

Condition: used, mileage: 115,280 km, power: 130 kW (176.75 HP), first registration: 07/2012, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Blaupunkt radio * Rear view camera system * BURY hands-free system * On-board computer * Air conditioning ----* 8-speed manual transmission * Leaf/air suspension * Engine brake ----* Bucher Schörling CityFant 6000 * Large TFT display with control panel * Bucher Smart control unit * Washing system * Large suction nozzle at the rear ----* Tire dimension front axle: 10R22.5 * Tire dimension rear axle: 10R22.5 * Fuel tank: 180 liters * Technically permissible total weight: 15000 kg * Tare weight: 9550 kg * Overall length: 6500 mm ----Vehicle number: 11599----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. In addition, we can offer the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arranging financing, applying for export license plates, vehicle delivery, vehicle registration, recovery and vehicle transport. Hfedezah S Tjpfx Achei

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions Hsdpfxst N Ty To Achefi

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2018 Capacities / Travels: Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Cross (Z): 1,500 mm Table Size: Hedoyu Swcepfx Achefi Length: 6,000 mm Width: 2,500 mm T-slot width: 22H12 mm Distance between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Main Drive: Type: Water-cooled inline motor Motor Power: 100% duty cycle, 43 kW Speed Control: Infinitely variable via water-cooled inline motor with star/delta switching Spindle Speed Range: Spindle speed: 20-7,000 rpm Torque at 37 kW/S1: 900 Nm (1,045/S6) Max. feed force: X, Y, and Z axes: 20,000 N Max. rapid traverse speed: X, Y, and Z axes: 35,000 mm/min Weight: approx. 44,500 kg STANDARD EQUIPMENT: Heidenhain CNC control TNC640 Automatic milling head, diagonal (infinitely variable) Automatic tool changer (40 positions) Chip conveyor Coolant system with 20 bar & internal coolant supply (IKZ) NC rotary table preparation Confirmation for deep hole drilling RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified faults or defects are professionally repaired by our expert service team.

Condition: good (used), functionality: unexamined, machine/vehicle number: VBP00065013000009, Year of construction: 2021, The PÖTTINGER TERRASEM V 6000 DZ is a modern universal seed drill designed for precise sowing of cereals and cover crops, with the option for simultaneous fertilizer application. It is part of the TERRASEM series from the manufacturer Pöttinger. Basic Information: Type: Combined seed drill (seedbed preparation + sowing combination) Production: approx. 2021 – present Application: Conventional, minimum tillage, and no-till systems Option: Sowing + fertilizing ("DZ" version = dual hopper / dual system) Technical Specifications: Working width: 6 m Hfodpey Em H Ujfx Achei Transport width: 3 m Number of rows: 48 Row spacing: 12.5 cm Press wheel diameter: approx. 380 mm Hopper capacity: up to ~5600 L (split, e.g. 40:60) Required tractor power: approx. 180 – 250 HP

Condition: used, functionality: unexamined, Year of construction: 2023, Bocker AK46/6000 / Man TGM 26.3 Truck Cranes 2 available 2021 & 2023 Hfodpjy Ndttofx Achoi Maximum capacity 6 tonnes, 44m boom length  Please note library photo shown. Current photos of the actual cranes to follow. Further information and usage/mileage to follow Early registration of interest is strongly recommended

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,197 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 6,000 W, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,525 mm, number of axes: 3, This 3-axis HGTECH Marvel 6000-3015 fiber laser cutting machine was manufactured in 2022. It features a working area of 3000 x 1500 mm. The machine is equipped with a Siemens SINUMERIK 840D SL CNC control and an automatic pallet changer for enhanced productivity. If you are looking to get high-quality cutting capabilities, consider the HGTECH Marvel 6000-3015 machine we have for sale. Contact us for further details. • Working area: 3000 x 1500 mm • Drive system: gantry drive Hfsdpsy Egwaefx Achoi • Transmission: rack and pinion • Control panel: touch color display • Motors and drives: Siemens motors and drive modules • Cutting head: Precitec ProCutter (compact/lightweight, autofocus focusing lens, distance sensor) • Laser source: external solid-state fiber laser Raycus • Laser output: single fiber (one LLK output) • Positioning: laser diode • Sheet detection: outer edge detection • Nozzle cleaning: automatic • Workspace lighting: integrated • Status indication: machine status light • Waste system: roll-out drawers, right side • Electrical cabinet: with internal lighting • Electrical connection: 380 V, 3‑phase, 50 Hz, 100 A Additional equipment • Cooling system: chiller unit • Pallet system: automatic pallet changer (longitudinal) • Extraction system: multi-chamber extractionNote: Laser power appears twice with different values (4000 W and 6000 W). Please confirm the correct rating.

Condition: new, Roller conveyor length 6000 mm Hsdpfx Acsy H N I Rehjfi Roller conveyor width 550 mm

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Hfedpfx Ajy Eu Tvjchoi Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: ready for operation (used), Year of construction: 2010, operating hours: 55,000 h, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 36,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 3, This 3-axis Unisign uniport 6000 gantry milling machine was manufactured in 2010. It features an impressive X-axis travel of 10,000 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,000 mm. The machine is equipped with a powerful 36 kW main drive and a 30-pocket automatic tool changer. If you are looking to get high-quality milling capabilities, consider the Unisign uniport 6000 gantry milling machine we have for sale. Contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Max torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): drilling 120 mm dia / tapping M55 / milling 100 cm³/min • Construction: Gantry design with movable portal bridge and stationary clamping table • Table configuration: Clamping bars in transverse direction with 750 mm spacing (standard plate fields omitted) • Tool changer: Automatic tool change; 30-pocket chain magazine on the portal column (capable of tool change into the angular head) • Operation mode: Pendulum machining capability • Cooling: Machine cooling unit; water-air heat exchanger integrated into the control cabinet • Coolant system: Operated dry; pre-fitted/ready for coolant use • Maintenance status: Tool magazine and X1/X2 ball screws completely overhauled in 2023; last manufacturer maintenance in 2023 • Installation: Machine recessed and anchored in a foundation pit Additional equipment • Angle boring and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit Hedpfey A Ifmsx Achefi • Probing: RWP20.50-M probe; plus 1 spare Hexagon RWP 20.50-M probe • Hydraulic clamping device with clamping bridges for axis machining, including hydraulic unit • 1x T-slot clamping field (2500 x 1200 mm) as an alternative to the hydraulic fixture • Chip conveyor: Hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Separation wall with viewing window • Setup and leveling elements • Diverse spare parts • Documentation included Technical Specification Taper Size SK 50

Condition: used, functionality: fully functional, power: 22 kW (29.91 HP), Year of construction: 1997, Circular vibrating screen Screen area: 6,000 x 2,000 mm Motor stand with drive components Hfjdpfeulu Rfex Achji Lower deck with piping and spray system incl. plastic screen linings for both screen decks

Condition: used, Year of construction: 2013, machine/vehicle number: CA47, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine Hodpfx Ajvguvzochsfi There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Condition: good (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: D1101C3066, laser type: CO₂ laser, laser power: 6,000 W, total length: 1,145 mm, total width: 1,035 mm, total height: 620 mm, Equipment: CE marking, TruFlow 6000 laser resonator by Trumpf for sale. The resonator is in good used condition and operates flawlessly. Two identical units are available (price is per unit). Hsdoyt Dchspfx Achefi

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3048 x 1524 x 280 mm Hjdeyz Ipiopfx Achofi simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. brass: 14 mm Max. copper: 8 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: new, Year of construction: 2025, machine/vehicle number: MR006589, High-quality, high-speed crosscut saw with automatic feed system and optimization software. This machine is equipped with a feature to detect faults in the material using chalk markings and comes with the following options: - Pneumatic feed cylinder right of the saw - Pneumatic feed cylinder left of the saw - 'OPTI' package with material length detection and additional optimization criteria - 'OPTI PLUS' package with photocell recognition of material defects - Machine with outfeed table (per meter) Hfedpfx Acoy I N Akjhei - Label printer - MO9416XLTD Technical specifications: - Mitre angle: 90° - Maximum cutting length: 360 mm - Maximum cutting height: 135 mm - Maximum feed length: 6000 mm - Saw list import: Yes - Chalk mark sensor: Yes - Maximum saw blade diameter: 500 mm - Motor power: 10 hp - Serial number: 10561

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: automatic, actuation type: electric, controller manufacturer: SUDA, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus 6000W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, total length: 8,450 mm, total width: 2,950 mm, total height: 2,320 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine designed for precise sheet metal processing. The MTP F-6000 combines a robust machine structure with high-quality components, ensuring excellent cutting quality, high working speed, and long service life. The machine is equipped with a 6000W laser source, an auto-focus cutting head, and a CNC control system. It is ideal for production plants, metal processing companies, and industrial workshops. The heat-treated frame structure ensures resistance to deformation and long-term precision. Key features: 6000W laser source Auto-focus cutting head CNC control system Linear guides Helical rack drive Rigid machine construction Automatic lubrication system Water cooling system Protective enclosure Advantages: High efficiency and cutting speed Excellent edge quality Low operating costs Easy operation Reliable continuous operation Applications: Steel structures production Sheet metal processing Automotive industry HVAC and ventilation Production of enclosures and metal parts Technical data: Model: MTP F-6000 Working area: 3000 × 1500 mm Laser power: 6000 W Cutting head: Auto Focus Control system: CNC Drive: Servo drives Guides: Linear Transmission: Helical rack Cooling: Water cooling system Hfjdpfxjyv Dx Aj Achsi Lubrication: Automatic Construction: Welded, heat-treated frame Cutting capacity (6000W): Mild steel: up to approx. 25 mm Stainless steel: up to approx. 16 mm Aluminium: up to approx. 14 mm Standard equipment: 6000W laser source Auto-focus cutting head CNC control system Chiller Extraction system Working table Protective enclosure Optional equipment: Air compressor Dust extraction system Exchange table

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1250 mm turning length: 6000 mm spindle bore: 130 mm Turning rate: 5 - 710 U/min. turning diameter over bed slide: 850 Hjdpfx Acsyktvxjhjfi total power requirement: 37/52 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady *

Condition: ready for operation (used), * Brand: Hazemag * Model: vibrating chute * Dim.: length 6000 mm - width 1150 mm Hfodpsywnaysfx Achji * incl.: steel construction. * Driving : 22 kW E-motor.

Condition: ready for operation (used), * Brand: Cyrus Hodpfxsywm Hlo Achjfi * Model: vibrating chute * Dim.: length 6000 mm - width 1200 mm * with: two pieces vibration motors of each 7,5 kW * Incl.: springs

Condition: ready for operation (used), Keyence IM 6020 Digital measuring projector Measuring microscope Microscope Keyence IM 6020 Keyence IM 6000 Hfedpfeunhq Rex Achji You are welcome to visit us for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Keyence VHX-6000 – High-Performance Digital Microscope for Industrial Applications, Research, and Quality Assurance. Condition: Used, in very good condition, fully functional. Smoke-free environment, no damages. ✅ Technical Specifications: Magnification: 0.1× to 5,000× (current configuration up to 2,500×) Image resolution: up to 4,800 × 3,600 pixels Sensor: 1/1.8" CMOS Frame rate: up to 50 images/sec Depth of field: High depth of field even in live image Measurement functions: 2D and 3D measurements (angles, areas, volumes, roughness) Motorized axes: X-Y motorized stage (100 × 100 mm), Z-axis for 3D topography Illumination: Multi-lighting function, LED light source Monitor: 23" IPS color display, Full HD Software: License-free measurement and analysis software Power supply: 100–240 V AC, 50/60 Hz Weight: Control unit approx. 12.5 kg, camera unit approx. 1.2 kg ✅ Special Features: Fully automatic image acquisition and measurement Observation from various angles without sample manipulation Creation of 3D images and surface scans Ideal for quality control, material analysis, research & development 📦 Scope of Delivery: Keyence VHX-6000 control unit Camera unit 23" monitor Motorized X-Y stage Objectives (e.g., VH-Z20T, VH-Z250T) Power supply and cables Original software Hsdpfoxtbpdjx Achsfi 🚚 Shipping & Collection: Collection by prior arrangement