Used Towerlight Superlight Vt1 Al for sale (135,629)

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h Bwsbocdy I To Hht Rijl nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Year of construction: 2025, Condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm Bob Hhefyadbot Riswl 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: good (used), Year of construction: 2007, inlet: 250 mm, Dust extraction,sawdust extraction,self-cleaning vacuum pneumatic filter Alko Mobil JET 250 Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Ideally suited for wide-belt grinders and all kinds of dry dust in various technological processes. Bweb Hht Reqwyafoijl 6.5 Kw fan Capacity 4900 m3/h Vacuum 2740 Pa Spigot diameter 250 mm Air return Technical documentation included

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Bsbov Svc Hs Hht Rijwl

Condition: ready for operation (used), Year of construction: 2009, Construction: Clean air chamber/fan/filter chamber/pre-separation chamber/disposal unit, Explosion pressure resistance: 200mbar, Motor power: 30kW, Nominal volume flow: 14000m³/h, Total pressure: 4700Pa. Number of filters: 128, filter length: 2500mm per filter, total filter area: 120m², filter category: BIA category C, machine dimensions X/Y/Z: approx. 4300mm/1600mm/9900mm. Including rotary valve ZRS 960, year of construction: 2009, number of blades: 7, inlet: 250mm/960mm, outlet: 208mm/960mm, motor power: 0.18kW, rotary valve speed: 4rpm, rated current: 0.8A. The frequency converter of the fan is defective. Documentation available. On-site inspection is possible. Bebsu Izr Ne Hht Rijwl

Condition: good (used), Drawbar, drawbar, overrun brake -Height-adjustable drawbar -cranked -with overrun brake -Support load: 100 kg -Allowable total weight: 1000 kg -Number: 13x tiller available Beb Hht Rjgnna Hsijwl -Price: per piece -Own weight: 40 kg

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz Bwebocdrzds Hht Riel max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: ex stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa Bwjb Hhjfydzbjt Rijl • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Bwjb Hheip Nqket Riol Manifold with pneumatic gates for connection with machines Control cabinet with technical documentation. Customs sluice Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Width - 1.45m x 1.45m

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Bjb Hhsv Svcyjt Riewl

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko clean air deduster Exhibit Sold at a special price Technical data Power Unit 250 P Intake manifold: 250 mm Nominal motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22,4 m² Spa collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Bwob Hhtocdr Enj Riel Location: Warehouse 54634 Bitburg Subject to prior sale

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Bweb Hefzbqyoht Risl Weight net 1,040 kg

Year of construction: 1998, Condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap Boboiu Hq Ds Hht Rijwl flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: used, filterintermediate filter/sparging filtervacuum unitsuitable for container feedingused, good condition,manufactured by  ALKOlength 1400 mmwidth 1400 mmheight 3000 mmsuction- /blow in connecting piece D 2 x 250 mmcoveringwith discharge / fan ca. 2,0 KW D 160 mmair recirculation possiblewith fans 2 piece2 x 2,0 kWdiameter D 250 mmlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Bob Hhovxa N Dot Riowl

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Immediately available Beb Hhecdy I Rot Riewl Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: used, Dimensions (L/W/H) 1400/2000 x1400 x3000 mm 2x 220/1x 180 mm Bwob Hht Revwfu Aoiel with 14 suction nozzlespneum. slide controlfan dischargevacuum system in compact designwith 12 built-in automatic slide valvesused, good conditionmake ALKOtype FU-2-12-800-70-III-Ano. 910225length 1400 / 2000 mmwidth 1400 mmheight 3000 mm12 x air intake D 180 with slide2 x air intake D 220 without slidecladdingshaking downwith discharge via fancompl. controlair return recirculation exhaust air D approx. 500 mmwith fan 2 pieceseach 0,9 3,0 kW - pole-changing motor1450 / 2800 rage location 97447 Gerolzhofendelivery as-is, free-loadedwithout guarantee and warranty

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface Beb Hhjhkzt Not Rijwl - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: used, Motor output 1,5 kW Air consumption 1140 m³/h Dimensions (L/W/H) 1200x450x2000 mm 100 mm Bsb Hsvwfupeht Riowl used, good conditionmake Alkotype Mobil Jet 100clean air unit / vacuumfor chipsGS-dust testedmotor 1,5 kWconnection diameter 100 mmcompression 2180 capacity 1140 m³/hfilling tons 1 piece / 135 literscartridgefilter cleaning manualnew price approx. 3.500,00 EURspace requirement approx. 1200 mm x 450 mm x 2000 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Bjb Hht Rsbpg Ncjijwl Top price for the exhibition piece

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Beb Hhovwfm Sot Rijwl

Year of construction: 2021, Condition: new, Excellent value for money Mobile in the workshop can be used *. High suction power significantly reduced dust (dust class L) Robust, reliable construction Options: filter cartridge, floor cleaning kit *. From the frame up robust engine, economical in terms of energy consumption, strong in the suction power. The AL-KO raw air dust extractors Mobile family are easy to handle and can be due to their low weight and the integrated castors always there, where you need their suction power. * In the wood and wood products, raw air dust extractors are not approved for use in workplaces in Germany, Austria and Switzerland. * Standard incl. 2 meters hose Technical data suction pipe of 160 160 mm motor nominal power 1.5 kW / 3 pH voltage 400 V / 50 Hz Flow rate 2,200 m³ / h vacuum 2,500 PA filter surface 2.2 m 2 chip sample volume 175 liter Dimensions (L x B x H) in mm 1,090 x 580 x 2,098 Weight 40 kg Bwob Hjcnz A Toht Rijl Location: Off the shelf 54634 Bitburg

Condition: used, Year of construction: 1998, used, good conditionmake AL-KOtype Mobil Jet 200year of manufacture 1998clean air unit / vacuumCE type-testedmotor 3.0 kWconnection diameter 200 mmpressure pa. 2360Air capacity 2260 m³/h2 filling barrels 2x 0.19 m³Pressure displaySpace requirement approx. 2000 mm x 830 mm x 2160 mmWeight approx. 250 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspected,without guarantee and warranty Bjbovwfk Rs Hht Rijwl

Year of construction: 2022, Condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Bob Hsdqzhbjht Riswl Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: new, Year of construction: 2024, Advantages -Compact design, space-saving -Powerful, high extraction capacity, low operating costs -Easy to maintain, long filter service life -Universally applicable, variable accessories -High flexibility -Mobile design -Suction technology with front plate system Technical data: Nominal motor power: 0,75 kW / 2,1 kW Motor speed: 960 / 1430 min Air volume: 6 800 m³ / h Beb Hht Rsbpg E Eoiewl Filter surface: 2 m² ( 2 x 1 mtr.) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248kg

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Bwob Hjfc A Urjht Risl Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg