Used International 966 for sale (9,619)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical Data – Lorenz LS 180 CNC External gear cutting – max. outside diameter: 280 mm Internal gear cutting – max. inside diameter: 100 mm + cutter diameter Max. workpiece outside diameter: 420 mm Max. module: 5 Max. stroke length: 60 mm Stroke rate (stepless): 250 – 1250 strokes/min Kdsdpjxyatujfx Ag Asw Machine weight: approx. 7,500 kg Machine dimensions (L × W × H): approx. 4,500 × 2,500 × 2,700 mm Additional Information Year of manufacture: 1992 Condition: good, well maintained Operational status: fully functional, ready for operation Location: Turkey Availability: immediately Inspection: test under power and inspection on site possible at any time by appointment

Condition: used, functionality: fully functional, Offered are used 20DV office containers. CONTAINER TYPE: Office Container 20DV CONDITION ON DELIVERY: Used, wind- and waterproof, without equipment, original photos All containers are equipped with electrical installation and heating, and the entrance door is located on the short side. The containers are sold in used condition and may show signs of wear, contamination, color variations, rust, etc. DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, clear internal height 2500 mm. AVAILABILITY: Immediately TRANSPORT: You can provide us your postal code so we can send you a free and non-binding quote for the container including delivery, and unloading from the truck if required. DIVERSITY: We also offer shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) for every requirement. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to your inquiry! MAGITU GmbH Kodpfx Ajxyib Iog Ajdw

Condition: used, mileage: 113,000 km, Year of construction: 2020, Serial number: ZCFA875F50269xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21794 Specifications:• Km: 113,000• Gearbox: Automatic• Engine brake• Euro 6, 207 hp• Good tires• Norka box body• Side door• Internal length: Approx. 6 meters• Internal width: Approx. 2.47 m• Internal height: Approx. 2.34 m• 4x2• Zepro tail lift, 1500 kg• Remote control• 3 seats• Reversing camera• Radio/CD• Climate control/AC• Services performed• Video• Ready for delivery Description:Iveco 75E-210 box truck from 2020.The truck has only 113,000 km.EU-approved and ready for delivery.Some cosmetic damage, see photos. Km: 113000 HK: 207 Technical approved: Yes EU-approved until: 28.03.2026 Own weight: 4980 Total Weight: 7500 Kjdpfoxwkfcsx Ag Asdw Payload: 2445 Width: 255 Length: 790 Euro: 6 Model: 75E-210 Gearbox: Automatic

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stock-No. 1022-E06344 Type of machine Machining Center - Vertical Make MAZAK Type MTV-655/80N Year of manufacture 2006 Kdodpfxexxbgms Ag Aew Type of control CNC Storage location NRW / Germany Country of origin Japan Delivery time Immediately Freight basis ex foundation Mazatrol 640 M CNC Control Travels: X-axis 2000 mm Y-axis 650 mm Z-axis 650 mm Spindle speed 6000 rpm with two gear stages Tool holder SK 50 Spindle motor power 18.5 kW Table size: 2240 x 650 mm Machine weight 12000 kg Equipment: Dual pallet changer (2PC) 4-axis Kitagawa rotary table Tool changer with 60 tool positions Zero Clamp zero-point clamping system Renishaw 3D touch probe Mayfran chip conveyor Coolant system with 70 bar pressure Internal tool cooling ILT internal extraction system with air filter

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2025_28, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Kedpfxsxx R H Ae Ag Ajdw Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Kdsdexl Hxbopfx Ag Ajw Volume (L): 1500 L

Condition: like new (used), Year of construction: 2020, operating hours: 18,000 h, functionality: fully functional, As-new Gear Grinding Machine KLINGELNBERG VIPER 500 W All-inclusive machine equipped for internal and external gearing Equipped with a special converter from EUR kW to US standard connection (simplified global connection) Available due to restructuring at a high-tech family-run company (no automotive production) Working Area and Capacities Max. workpiece diameter: 500 mm Max. grinding stroke: 500 mm Working area over table (min.–max.): 300 – 800 mm Distance between spindle center and table (min.–max.): 442 – 1042 mm Module (generating grinding module): 0.5 – 22 Swivel angle (min.–max.): –180° to +45° Grinding System Grinding wheel diameter (min.–max.): 221 – 350 mm Grinding worm diameter (min.–max.): 221 – 350 mm Max. grinding wheel width: 75 mm Max. grinding worm width: 150 mm Grinding spindle power: 37 kW Max. grinding wheel speed: 6000 rpm Table and Feeds Table diameter: 400 mm Table bore Ø × depth: 100 × 500 mm Max. table speed: 1000 rpm Max. axial feed: 20,000 mm/min Max. radial feed: 12,000 mm/min Max. tangential feed: 20,000 mm/min Connections and Dimensions Total connected load: 60 kVA Machine dimensions (L × W × H): 4220 × 3120 × 2526 mm Filter unit dimensions (L × W): 3490 × 2250 mm Net weight approx.: 19,300 kg Machine Configuration – VIPER 500 W Base Machine and Options VIPER 500 W base machine Preparation for internal grinding arms Internal grinding unit V5 for straight or helical internal gears Measuring system for profile, lead, and pitch of external gears Measuring system for profile, lead, and pitch of internal gears V5 Touch Trigger Phasing System Power supply with ESR voltage drop compensation 100 mm table adapter Preparation for hydraulic clamping devices Hydromechanical unit for drawbar clamping systems Grinding oil filtration system with band filter 100 Fire extinguishing system Automatic work area door Cleaning system with spray gun Crane/hoist integrated into enclosure Isolation transformer Kdedpfx Agexx T N Te Asw Voltage stabilizer and isolation transformer Signal light/beacon tower Software Packages Gear PRO software Software for grinding of spline shafts Software for testing of spline shafts BIAS control software for gear grinding CBN grinding wheel software ADI dressing process optimization DLC lifetime monitoring for dressing tools Flexible profile correction for grinding operations Consumables Endless filter band Assembly/disassembly aid for filter band 100 Diamond dressing rollers CVD dressing roller D200 R1 for profile grinding CVD special dressing roller for generating grinding Grinding wheels Grinding wheel D350 B60 for profile grinding Grinding wheel D350 B45 for profile grinding Profiled grinding wheel D350 B150 for generating grinding Distance rings/intermediate plates 4 intermediate plates B100 22 intermediate plates B60 30 intermediate plates B45 37 intermediate plates B30 Additional Components Grinding wheel flange without intermediate plate Set of standard probes / measuring probes Additional Options Warranty extension from 12 to 24 months Closed Loop 1.0 basic version Interface for external automation

Condition: good (used), mileage: 534,484 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,350 mm, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, traction control, = Additional Options and Accessories = - Second diesel tank - Digital tachograph - Electric mirrors - Tachograph (control device) - Fixed fifth wheel - Globetrotter XL = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,285 kg, Gross weight: 18,000 kg, Total tank capacity: 1,230 liters, Second diesel tank, Fifth wheel height: 111 cm, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cab type: Globetrotter XL, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Climate control, Heated seats, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 375 kW (503 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission make: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seating arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: Volvo, 12-speed, automatic Axle Configuration Tyre size: 315/70R22.5 Brakes: disc brakes Axle 1: Steering; Left tyre tread: 10 mm; Right tyre tread: 10 mm; Suspension: leaf suspension Axle 2: Twin tyres; Left inner tread: 6 mm; Left outer tread: 8 mm; Right inner tread: 6 mm; Right outer tread: 8 mm; Suspension: air suspension Weights Unladen weight: 8,285 kg Payload: 9,715 kg Gross vehicle weight: 18,000 kg Condition Technical condition: good Visual condition: good Damages: none Number of keys: 1 Financial Information Leasing price: €966 per month (default, 60 months); Please ask for further information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! Kdsdpfexw D Nzox Ag Aew • Large, rapidly changing inventory • Recognizable quality • Attractive pricing • Professional business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Professional technical services • The security of 'recognizable quality' • And more... Please visit our website for special offers and the full stock list: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly for our European warranty package.

Condition: used, machine/vehicle number: YG9VPU330DN03xxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21286 Specifications trailer: 2013 model 3 axles Turn on 1 Lift on 2nd axle Full side opening Tires (see pictures) 21 pallets Internal length: Approx. 8.5 m Internal width: Approx. 2.5 m Internal height: Approx. 3.05 m Technical approved: Yes EU-approved until: 13.11.2026 Own weight: 7200 Kdjdpfx Agexbxqne Aew Total Weight: 30000 Payload: 22800 Model: skapslep

Condition: reconditioned (used), STUDER S 20-12 is a cylindrical grinder engineered for precision, high accuracy and reliable performance. Capacities: centre height 100 mm, distance between centres 400 mm; wheel Ø300×30 mm, bore 127 mm; work-spindle 20°, table tilt 30°. Specs: work-spindle speeds 60–1200 rpm (stepless); wheel speed up to 45,000 rpm; table feed 100–3500 mm/min; wheel motor 4.5 CV; 3×380 V; weight ≈1900 kg; dims 1500×1400×1600 mm. Key accessories: swivelling internal grinding unit, dressing devices, 120 mm magnetic chuck. Achieves tight tolerances; typical sectors: automotive, aerospace, toolmaking, medical, watchmaking Ksdjxx U T Hepfx Ag Asdw

Condition: used, Year of construction: 2007, x-travel 520 mm y-travel 730 mm z-travel 510 mm Control Matsuura Fanuc spindle tunring speed 15.000 U/min table surface area 300 x 300 mm tool taper BT 40 number of tool places 240 Pos. rotating range 360 ° swivelling range ° Number of working hours ca. 20.700 h spindle hours ca. 6.700 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. It is a well-maintained machine with low spindle hours. Technical features & accessories: Kdedjxxb Iwepfx Ag Ajw - Internal coolant supply - Renishaw touch probe system - Chip conveyor - 5-pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, empty load weight: 3,600 kg, maximum load weight: 8,300 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: other, tire size: 205/65 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable up to approx. 3,850 mm, locking possible at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm, laden loading height approx. 830 mm, internal vehicle width approx. 2,530 mm, 4 centre post pockets for 100 x 50 plug-in posts, 8 post pockets in outer frame, 4 lashing rings, each rated at 5.3 t, outer frame with lashing eyes, 4 warning signs with lighting, removable rear beacon, contour markings and side underrun protection, mudguards and spray suppression at rear. Subject to printing errors, mistakes and changes; sample images. More details at: ! Kdedexx Raiepfx Ag Aew

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Kdsdpsxxpdgefx Ag Ajw Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), mileage: 550,639 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,350 mm, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, traction control, = Additional Options and Equipment = - Second diesel tank - Digital tachograph - Electric mirrors - Tachograph (recording device) - Fixed fifth wheel - Globetrotter XL = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,285 kg, Gross weight: 18,000 kg, Total tank volume: 1,230 liters, Second diesel tank, Fifth wheel height: 112 cm, Fifth wheel: Fixed, Number of lockable differentials: 1, Suspension type: Air suspension, Cab type: Globetrotter XL, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Parking air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Color: white, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Air conditioning, Heated seats, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 375 kW (503 hp), Fuel type: Diesel, Euro standard: 6, Transmission type: I-Shift, Transmission make: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: VOL, 12 speeds, automatic Axle configuration Tyre size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steering; Left tyre tread: 9 mm; Right tyre tread: 10 mm; Suspension: leaf spring Axle 2: Twin tyres; Left inner tread: 11 mm; Left outer tread: 12 mm; Right inner tread: 12 mm; Right outer tread: 12 mm; Suspension: air suspension Weights Unladen weight: 8,285 kg Payload: 9,715 kg Gross vehicle weight: 18,000 kg Maintenance APK (Technical Inspection): valid until 03/2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Financial Information Leasing price: €966 per month (default, 60 months); Please inquire for more information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of all years and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive prices • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The safety of “recognizable quality” Kjdpjxw D Nujfx Ag Aedw • And much more… Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask us directly about our European warranty package.

Condition: used, machine/vehicle number: YF2S58SKGKKE3xxxx, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 20774 Specifications: 2019 model 3 axles Turn on 1 Lift on 2 Okay tires Kjdjwvy N Depfx Ag Ajdw Air suspension Tool cabinet Full side opening 21 pallets Internal length: Approx. 8.5 m Internal width: Approx. 2.5 m Internal height: Approx. 2.95 m Ready for delivery Technical approved: Yes EU-approved until: 29.09.2026 Own weight: 7720 Model: skapslep

Condition: reconditioned (used), KELLENBERGER KEL-VISTA UR 175X600 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacity: centre height 175 mm; between centres 800 mm; grinding length 600 mm; max Ø 349 mm; max weight 100 kg. Key specs: Z 750 mm; X 320 mm; left wheel Ø400×80×127, right Ø300×40×127; wheel speeds 875–1900 rpm (stepless); wheel motor 5 kW; work spindle 8–800 rpm (stepless), taper 5 CM; rapid 12 m/min; air 6 bar; 3×400 V 50 Hz; machine ≈3000 kg; 3200×1700×2000 mm. Accessories: coolant, coolant-through-spindle (IKZ), paper filter, MARPOSS probe, MOVOMATIC measuring control, internal grinding attachment, balancing, RS‑232. Suited for tight tolerances in automotive, watchmaking, machine tools, aerospace, medical. Kedpfx Ajxx U Taog Aodw

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Tech. data: Technical Data: Kjdsxx Tm Sspfx Ag Aodw X-axis: 630 mm Y-axis: 500 mm Z-axis: 500 mm Clamping area: 800 x 500 mm Tool holder: SK40 Spindle: 10,000 rpm Power-on hours: 32,461 Spindle hours: 12,046 Equipment: - Internal coolant supply (IKZ) - Belt filter - Chip conveyor - Handwheel - Heidenhain iTNC 530 - Manual touch probe

Condition: good (used), Year of construction: 2017, Ref. -No.: 10570 Manufacturer: FERMAT Type: WFT 13 R Year of construction: 2017 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 4000 mm Y-Travel: 3000 mm Z-Travel: 1500 mm W-Axis: 730 mm V-axis: 700 mm Bore Spindle Diameter: 130 mm Rotary Table (Lxw): 2000 x 3000 mm Table Load: 25000 kg Tool Taper: SK 50 / ISO 50, DIN 69871 Form AD Kjdpfjxxpb Sox Ag Aedw Tool changer: Robi 105 Spindle Speed: 4000 RPM Rapid Travel X/Y/Z: 20000 mm / min Main Drive: Siemens 41 kW S1 kW Servo drive: 2 Pcs pinion: 2 Pcs Internal cooling: 70 bar handwheel: Heidenhain HR 550 spindle support: 250 mm Ejection height: 900 mm Probe: Renishaw RMP 60 Table Diameter: 4300 / 2000 Ø / mm Rapid traverse V-axis: 10000 m / min Further information: - Vertical control panel with integrated keyboard and 15-inch LCD screen - Master-slave system, max. load 20 t, ROD encoder on the B-axis - Heidenhain optical linear system, absolute for the V, W, X, Y, and Z axes - Machine with increased accuracy - Control cabinet with air conditioning - Automatic lubrication system - Automatic clamping of accessory heads - Hydraulic device - Spindle bearing cooling unit for temperature stabilization - Chip conveyor as segment conveyor with integrated pump for coolant circulation (including level gauge and filtration) - CNC adjustable with paper belt filter - Sump pump with level gauge - Manual milling head UHM 30 with automatic clamping The machine can be viewed under power by appointment.

Condition: used, machine/vehicle number: YF9TTS3LL5501xxxx, Year of construction: 2005, Please contact ATS Norway for more information Please provide reference number upon request: 20660 Specifications: Kodpfx Aowp D Spjg Asdw Model year: 2005 Air suspension Carrier cooling/freezing unit Full side opening Good tires (see photos) Internal length: approx. 13.41 m Internal height: approx. 2.68 m Total length: 13.70 m Width: 2.60 m Curb weight: 11,350 kg Description:Ekeri box semi-trailer from 2005, featuring full side opening for easy and flexible loading.Equipped with a Carrier cooling/freezing unit, suitable for temperature-controlled transport.Ready for quick delivery. Technical approved: no EU-approved until: 22.11.2024 Own weight: 11350 Total Weight: 42000 Payload: 30650 Width: 260 Length: 1370 Model: Skapsemi m/ full sideåpning og Carrier aggregat

Condition: used, TORNOS DECO 2000/20 is a CNC automatic lathe delivering high precision, excellent accuracy and reliable performance. It features 10 axes, an internal spindle bore Ø20 mm, two independent carriages (X1‑Y1, X2‑Y2) with 5 positions each, 4 driven tools and a back spindle (3) up to 10,000 rpm for compact, flexible machining. Key specs: spindle stepless up to 10,000 rpm, spindle motor 2.2 kW, C‑axis resolution 0.1°, voltage 50 Hz 3x380‑420 V, total power 11 kVA, machine weight ≈3000 kg, overall L2950×W1100×H2300 mm. Accessories: SBF bar feeder Type 535, parts catcher and tool pre‑setting device. Capable of achieving tight tolerances; suited to automotive, watchmaking, tooling, aerospace and medical sectors. Kjdpoxx U I Rsfx Ag Ajdw

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Kodpfx Agsxxpbxs Aedw Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: reconditioned (used), KELLENBERGER 600 U 175 is a cylindrical grinder of high precision, offering accuracy and reliability. Capacities: centre height 175 mm, between centres 600 mm; wheel Ø350×50 mm, bore 127 mm; wheelhead 270°. Specs: wheel speeds 1500–3600 t/min (4 steps); work spindle 20–400 t/min (stepless); table tilt 10°, up to 6 m/min; supply 3×380 V 50 Hz; wheel motor 4 CV; weight ≈2200 kg; dims 3000×1750×1600 mm. Accessories: digital readout (2 axes), tailstock fine adjust, internal grinding attachment, wheel guard, safety device, sliding door. Suited to tight tolerances in automotive, watchmaking, machine tools, aerospace and medical sectors. Kjdpfx Agjxx U H Te Aedw

Condition: used, STUDER S41 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacities: centre height 275 mm, distance between centres 1000 mm, max workpiece Ø 550 mm, workpiece height 1000 mm, Z 1150 mm, X 350 mm, workpiece weight 250 kg. Specs: grinding wheel Ø500×100 mm, peripheral speed 50/80 m/s, spindle speeds 0–4500 rpm, wheel head swivel -45/+225°, workpiece spindle motor 15 kW, 3x400 V 50 Hz, air 5 bar, tailstock stroke 60 mm (Ø 60 mm), machine weight ≈9000 kg. Accessories: high‑res C‑axis, B1+B2 axes, coolant system, internal grinding attachment, 2 spindles, lamp, status light, PC system, electronic handheld control, foot pedal. Achieves tight tolerances; typical in automotive, aerospace, toolmaking, medical and watchmaking. Ksdpfxoxx U Dfo Ag Aodw

Condition: used, STUDER CT 960 is an Internal grinding machine delivering precision, high accuracy and reliable performance. Working capacities: centre height 150 mm, grinding length 150 mm, X/Z travels 400 mm, wheel diameter 250 mm, spindle hole 35 mm; B-axis +61/-91°, rotatable head -5/+275°, turret with 4 spindles. Main specs: spindle speeds 6000 / 45000 / 60000 / 90000 rpm; X/Z feeds 12 m/min; air 6–10 bar; 3x 400 V 50 Hz; total power 34 kVA; weight ~4050 kg; dimensions L 3218 × W 2256 × H 2300 mm. Equipment: coolant system, measuring probe, diamond redresser, spindle cooling, flanges for internal grinding, tool holders, 3-jaw chucks Ø100/125/160, magnetic chuck Ø125/300, tool cabinet, lamp, fire system, electronic handwheel, external grinding spindle 6000 rpm, calibration accessories. Enables tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Kjdpfx Aexx U Ausg Ajdw

Condition: used, CITIZEN CINCOM R 04 VI is a CNC automatic lathe / Swiss-type lathe designed for high precision, accuracy and reliability. It features 6 axes and 2 spindles, max. turning diameter 4 mm, max. turning length 40 mm, internal spindle diameter 9 mm, max. threading diameter 3 M. Main specs: up to 20000 t/min, spindle power 0.5/0.75 kW; tool-holder count 3 with 15 stations; turning tools 5, drilling tools 4, transverse tools 2; tool shank 8 mm; counter-operation 4 tools. Voltage 50 Hz 3x400 V; machine weight ≈850 kg; dimensions L1485×W560×H1410 mm. Accessories: LNS TRYTON 107 Hybrid bar feeder, parts catcher, coolant system, lamp. Ensures tight tolerances; suited to watchmaking, medical, automotive, aerospace and precision components. Kdjdpfx Agoxx Uz Ro Ajw