Used International 966 for sale (9,158)

Year of construction: 2014, condition: good (used), Cryovac STE96-600 hot water shrink tunnel Iiodpjmx Sknjfx Af Sek Serial: SN00422 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 16,228 h, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,700 mm, drive type: Diesel, Diesel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, Iiodsu Acx Topfx Af Ssk

Condition: used, Year of construction: 2016, operating hours: 14,745 h, * Radio * Air conditioning * Bucket * Joystick steering * Rear-view camera * Central lubrication system Iisdpfx Afoxchqmo Ssk * Weight: 24,000 kg -----Internal vehicle number: 11133----Subject to errors & prior sale.

Condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower Iisdpfjdz Smnex Af Ssk -Motor power: 15 kW -Speed: 2925 rpm -Total pressure: Pg 33 m bar -Total pressure: Pst 30 m bar -Volume flow: 9660 m3/h -Inlet connection: O 400 mm -Outlet connection: O 400 mm -Dimensions: 1090/860/H1200 mm -Weight: 238 kg

Condition: used, Attachment suited for: Construction machines Cargo space capacity: 4.000 l Selling price: US$ 6.750, € 6.372 CAT966L SECOND HAND BUCKET CAPACITY: 4M^3 Isdpfxsn Tm Eys Af Sjik EDGE LENGTH: 3255MM WEIGHT: 2500KG

Condition: new, empty load weight: 1,055 kg, maximum load weight: 2,445 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 9,660 mm, loading space width: 2,040 mm, loading space height: 350 mm, loading space volume: 7.8 m³, color: silver, construction height: 1,130 mm, working width: 2,100 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, extendable drawbar 310cm, extendable rear light carrier 200cm, 4 stake pockets with 4x insertion stanchions 300cm, aluminium drop sides foldable all round, * IMMEDIATELY AVAILABLE * incl. extendable drawbar 310cm, extendable rear light carrier 200cm, 4 stanchion pockets with 4x insertable stanchions 300cm, aluminum drop sides foldable all around Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,055 kg - Payload: 2.445 kg - Interior dimensions assembled: 966 x 204 x 35 cm (L x W x H) - Interior dimensions: 486 x 204 x 35 cm (L x W x H) - Overall exterior dimensions assembled: 667 x 210 x 113 cm (LxWxH) - Loading sill height: 78 cm - Tires: 185/R14C steel rim - Brake: Yes - Support wheel: Yes - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen printing plate 18mm - Drop sides: anodized aluminium, double-walled - Drop side height: 35cm - Removable drop sides: four walls can be folded down - Drop side hinges: 4 on the side / 3 at the front + rear - Removable corner stanchions: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: ALKO - Frame/chassis: tubular drawbar - Attachment: at extra charge - Locks: Long lever locks recessed - Lashing eyes: 8 recessed on the inside - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & individual approval Standard equipment: - Unique, torsion-resistant side member chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - All drop sides removable - Made of multi-glued screen printing plate, 18 mm, anti-slip and waterproof - corner stanchions with insertion option for attachments - axle with continuous axle beam and independent wheel suspension - 8 folding lashing recesses, recessed in the floor frame profile - recessed long lever locks - sturdy tubular drawbar can be extended without tools, free drawbar length approx. 3100 mm - maintenance-free rubber spring axle from ALKO - automatic reverse - ALKO overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - lighting recessed in rear frame - integrated rear fog light - 13-pin plug - registration documents: vehicle registration document (ZBII) Special equipment included in the price: - Rear light carrier 2000 mm extendable, flush with upper edge of cargo bed, max. 200 kg load capacity with long material - 4x stake pockets 100x100 mm flush with cargo bed, centered - 4x insert stanchions 90x90 mm, total length approx. 3000 mm Accessories can be retrofitted - please enquire: - Support bracket on drawbar, variably mountable for 3500 kg - Perforated railing on dropside - High front grille - High tarpaulin - Spare wheel - Storage box - Rear supports - Flat tarpaulin - Additional lashing eyes - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Iisdpfsu Hr Dtox Af Sjk

Condition: used, Year of construction: 2006, Transnorm roller conveyor 2229-660-600 RA2425 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 660 mm Length: 2229 mm Roller diameter: 30 mm Roller distance: 76 mm Motor Roller conveyors: no motor but with 2x pneumatic brake Brake area length: 500 mm Height frame: 90 mm Height with brakes: 200 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Iiedpfjw Nq S Usx Af Sjk Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2024, automatic trailer hitch tyres 70050-26.5 mounting wheel loader WS type VM attachment for 9660 T / conversion parts for third-party equipment Deutz engine 204 hp SDCT gearbox 40 km/h / accelerator pedal control incl. manual gas locking detent elect. for additional control unit / central lubrication system Iiedpjt Dxnrjfx Af Sjk

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, tire condition: 90 %, drive condition: 90 %, number of seats: 1, machine/vehicle number: KM&EW144, Equipment: cabin, hydraulics, Product Description Used logfork machinery Iiodpfx Aoum Eiuef Sok Manufactured by Caterpillar Model CAT 966C Operates on Diesel Engine Machine sold as its condition More information Please contact VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: used, Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens -Type: Simatic OP 396 6ES5 396-0UA11 -Dimensions: 150/250/H60 mm Ijdpfsd Drxzsx Af Ssik -Weight: 1 kg

Condition: new, empty load weight: 1,460 kg, maximum load weight: 2,040 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,200 mm, loading space height: 350 mm, loading space volume: 8.5 m³, color: silver, construction height: 1,100 mm, working width: 2,280 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, aluminium drop sides foldable all round, * IMMEDIATELY AVAILABLE * incl. aluminium drop sides foldable all round Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,460 kg - Payload: 2,040 kg - Interior dimensions: 966 x 220 x 35 cm (L x W x H) - Overall exterior dimensions: 1,183 x 228 x 110 cm (L x W x H) - Loading sill height: 70 cm - Tires: 195/50R13C steel rim - Brake: Yes - Support wheel: at extra charge - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen printing plate 18mm - Drop sides: anodized aluminium, double-walled - Drop side height: 35cm - Removable drop sides: four walls can be folded down - Drop side hinges: 8 on the side / 3 at the front + rear - Removable corner posts: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: ALKO - Frame/chassis: V-drawbar - Attachment: at extra charge - Locks: Long lever locks recessed - Lashing eyes: 16 recessed on the inside - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & individual approval Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - All drop sides removable - Made of multi-glued screen printing plate, 18 mm, slip-resistant and waterproof - Corner stanchions with insertion option for attachments or grids - 3 axles VA 1500 kg, HA 2 x 1300 kg - maintenance-free rubber spring axles - axle with continuous axle beam and independent wheel suspension - 16 folding lashing recesses, mounted recessed in the floor frame profile - recessed long lever locks - sturdy V-drawbar - maintenance-free rubber spring axle from ALKO - automatic reversing - ALKO overrun device and parking brake - 13-pin plug - reversing lights - large rear lights - large rear lights - large rear lights. plug - reversing lights - large safety lighting - lighting recessed in rear frame - integrated rear fog light - 13-pin plug - registration documents: vehicle registration document (ZBII) & individual approval Accessories can be retrofitted - please enquire: - perforated railing on dropside - high front grille - high tarpaulin - spare wheel - storage box - rear supports - ramps - flat tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iijdpfju Hr Dmjx Af Sok

Condition: used, functionality: fully functional, power: 158.13 kW (215.00 HP), fuel type: diesel, color: yellow, Year of construction: 1999, machine/vehicle number: 99Y06166, Equipment: cabin, hydraulics, Product Description Used Caterpilllar Wheel Loader Manufactured by CATERPILLAR Model CAT 966E Operates on Diesel Engine Machine sold as its condition Please contact Iiedeundx Dopfx Af Sok VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: new, empty load weight: 1,680 kg, maximum load weight: 1,820 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,440 mm, loading space height: 350 mm, loading space volume: 9.3 m³, color: silver, construction height: 1,100 mm, working width: 2,520 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, aluminium drop sides foldable all round, * IMMEDIATELY AVAILABLE * incl. aluminium drop sides foldable all round Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,680 kg - Payload: 1,820 kg - Interior dimensions: 966 x 244 x 35 cm (L x W x H) - Overall exterior dimensions: 1,183 x 252 x 110 cm (LxWxH) - Loading sill height: approx. 70 cm - Tires: 195/50R13C steel rim - Brake: Yes - Support wheel: at extra charge - 100km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: Wood, screen printing plate 18mm - Drop sides: anodized aluminium, double-walled - Drop side height: 35cm - Removable drop sides: four walls can be folded down - Drop side hinges: 8 on the side / 3 at the front + rear - Removable corner posts: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: ALKO - Frame/chassis: V-drawbar - Attachment: at extra charge - Locks: Long lever locks recessed - Lashing eyes: 16 recessed on the inside - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: ZBII & individual approval Standard equipment: - Unique, torsion-resistant side member chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Double-walled anodized aluminium drop sides - Drop sides foldable on 4 sides - All drop sides removable - Made of multi-glued screen printing plate, 18 mm, slip-resistant and waterproof - Corner stanchions with insertion option for attachments or grids - 3 axles VA 1500 kg, HA 2 x 1300 kg - maintenance-free rubber spring axles - axle with continuous axle beam and independent wheel suspension - 16 folding lashing recesses, mounted recessed in the floor frame profile - recessed long lever locks - sturdy V-drawbar - maintenance-free rubber spring axle from ALKO - automatic reversing - ALKO overrun device and parking brake - 13-pin plug - reversing lights - large rear lights - large rear lights - large rear lights. plug - reversing lights - large safety lighting - lighting recessed in rear frame - integrated rear fog light - 13-pin plug - registration documents: vehicle registration document (ZBII) & individual approval Accessories can be retrofitted - please enquire: - perforated railing on dropside - high front grille - high tarpaulin - spare wheel - storage box - rear supports - ramps - flat tarpaulin - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Isdpfxsu Hr Dye Af Soik

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: Iijdpex Ddcuofx Af Sok 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Iiodpfjxdn Nrex Af Sek Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €154,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 Iisdpfjxmthrox Af Sjk TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic Iedpfxev Ehbbe Af Sjik inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings Isdpfxew Iquyj Af Ssik -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: Iisdpfx Aoxnrtcof Sok 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t Iiedpfx Ajwwar Isf Ssk dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Iiodpfx Ajrualpjf Sek Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Iodpjrtrzdsfx Af Seik Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System Isdpfortrvysx Af Ssik 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Iiodpfxjrtryyj Af Sjk Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Iijdpfx Afortrxio Sek Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.