Used Wacker Dpu 3060H-Ts for sale (87,255)

Condition: used, Year of construction: 2024, fuel type: diesel, power: 169 kW (229.78 HP), motor manufacturer: S16R-PTA2, Field of application: Construction Empty weight: 23.500 kg Cgjlqvewgvrce Ifmst Generator capacity: 2.000 kVA Frequency: 50 Voltage: 230 Transport dimensions (LxWxH): 40 ft HC Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Cgolevb E Uqjqv Ifmjt Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2022, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information go online. Cgjlqswgxi Djv Ifmst

Condition: excellent (used), Functionality: fully functional, Universal blender machine Blender type 45 Bowl capacity approx. 45 liters with 180° tilt function Capacity approx. 10 to 180 liters/hour Electrical system NEW Cgjlqv Ifjt Em A Hemet connection 400V, 5,5 kW, 16A-CEE plug Used machine Many more bakery machines in stock!

Year of construction: 2001, Condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm Cgjlqv Ifjg Icdyjmot dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: new, mileage: 86 km, power: 85 kW (115.57 HP), fuel type: electric, gearing type: automatic, overall weight: 4,150 kg, next inspection (TÜV): 05/2027, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153122 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 Cgjlqv Ifsv I I Ugomjt * Tel.: Exterior * Heated rearview mirror Interior * Driver comfort suspension seat, suspended and heated * Automatic climate control Safety * Airbag Comfort and Environment * Automatic transmission * Heated steering wheel * Reverse traffic warning system * Lane departure warning system Other * 2-DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay and hands-free system * 3-year manufacturer's warranty from first registration to 100,000 km * 3-spoke multifunction leather steering wheel, heated * The vehicle has a one-day registration in June 2024 * Spare wheel carrier, double-locked * Hire purchase/financing or leasing available through Daimler Truck Financial Services Germany (DTFSD). We would be happy to provide you with a quote. * Engine version B "zero emission", eCanter * Interface, FMS fleet management system * Fuso safety package including floor mats * Mirror mount Medium, including wide-angle mirror * Windshield, green laminated glass, heated * Stabilizer, rear axle Other: * Nationwide delivery for €249 net plus VAT (€296.31 incl. VAT) * For all vans: 12 or 24-month Mercedes-Benz used car warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors * Subject to errors and prior sale ----.

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor SN:M54644060 + Tamagawa OSE 12.5KN-6-12-0 encoder SN:7945T, used, normal signs of use, 100% functional, scope of delivery as per photos Cjlqvoi D I N Uj Ifmjgt

Condition: used, Year of construction: 2019, TSUGAMI B0386E-III Swiss type lathe WORKING AREA Bar diameter Ø mm 8 – 38 Max part length mm 320 (Direct-driven rotating guide bushing) Max part length mm 70 (Without guide bushing) Max drilling diameter Ø mm 13 Max thread diameter M 12 Max chuck diameter for sub spindle Ø mm 38 Max drilling diameter for sub spindle Ø mm 12 Max thread diameter for sub spindle M 12 Max drilling diameter for driven tools Ø mm 10 Max thread diameter for driven tools M 8 Max diameter T-slot cutter (driven tool) Ø mm 45 CAPACITY Max spindle speed main spindle rpm 6000 Max spindle speed sub spindle rpm 7000 Max spindle speed rotating guide bushing rpm 6000 Max spindle speed tool spindle rpm 5000 Number of tool positions pcs 29 Tool size mm 16x16x125, 20x20x125 Rapid traverse speed m/min 32 (Z2, X2) 24 (X1, Y1, Z1, Y2) MOTORS Main spindle kW 11 / 7.5 Sub spindle kW 5.5 / 3.7 Driven tools kW 1.4 (1.0 for cross-drilling units front tool post) Y2 kW 0.5 X1, Y1, Z1, X2, Z2 kW 0.75 Coolant pump kW 0.4 Lubricating oil pump W 3 CONTROL SYSTEM FANUC 32i-B Controlled axes (including C-axes) pcs 8 X1, Z1, Y1, X2, Z2, Y2, C1, C2 LCD / MDI 10.4” color LCD OTHER Coolant tank L 190 Length x width x height mm 2240 x 1515 x 2050 Net weight kg 4950 Power requirement KVA 22.5 EQUIPMENT: Fanuc 32i-B control system with 8 controlled axes (X1, Z1, Y1, X2, Z2, Y2, C1, C2) Cross drilling unit with 4 spindles C-axis for main spindle and sub spindle Automatic programming software Abile Tool height compensation function Tool counter Screen for periodic maintenance Door lock Coolant level detector Spindle cooler Standard tools Retractable coolant nozzle Brake for the main spindle MACHINE PRICE: TSUGAMI B0386E-III (8 controlled axes) OPTIONS INCLUDED IN THE MACHINE PRICE: Tool set gauge O.D. Included Signal tower 3-step Included Work lighting LED Included Bar interface Included High-pressure pump (1.5 kW, 20 bar, 18 l/min) Included Rear drive unit (rear drive, 1.4 kW) Included Brake for sub spindle Included Direct-driven rotating guide bushing (Tsugami 2621-1234) Included Adapted for water-based cutting fluid (water type coolant specification) Included Oil blowing with M code (X-axis front 1, X-axis rear, Z2) Included Adapter for main spindle (Shaublin F37) and sub spindle (Shaublin F37) Automatic power off Included Cslqv Ifsv Ipuzjmjgt Air blowing for main spindle, sub spindle, and cross drilling unit 2 years Fanuc warranty (from shipment) Transformer, Operator manual, Compliance with European requirements including CE marking Drill set gauge I.D. (Long, Middle, Short) Detail ejector front with oil blowing (stroke 147, max work length 106 mm) Part conveyor with part separator (chute width 135, belt width 90) Rigid tapping also for rotating tools (cross drill, rear drive, back drive) 3 tool spindles for rear drive ER16, max 5000 rpm (tool spindle for rear drive) 4 tool spindles for back tool post (3282-Y041) 4 back adapters (dia 25 fixed tool) Guide bush adapter (Dunner CJ9) Guide-bushless kit incl stopper Chip conveyor (flat type) 10.4” color screen Included Minimum input increment (0.0005mm for X1 & X2, 0.001 mm for other axes) Included Linear interpolation Included Circular interpolation Included G04 Dwell (delay) 0-99999.99 Included Absolute/Incremental programming (X, Z, Y, C absolute / U, W, V and H incremental) Included Number of tool offsets: 99 Included Program memory: 64 kB (80 m perforation tape) Included Num...

Condition: excellent (used), Year of construction: 2017, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information go online. Cgslqv Iowgxidsfmst

Condition: reconditioned (used), Functionality: fully functional, warranty duration: 6 months, DGUV certified until: 06/2026, year of last overhaul: 2025, Fritsch Rollfix Model: 30WK650 Rollfix Manual dough sheeter For all types of dough, rolling and rolling Stainless steel construction With hand and foot controls Belt width 650 mm Bottom table with pressure plate With rail for inserting long rollers Infinitely variable roller adjustment New belts and scraper blades Mobile machine with 2 locking devices DGUV V3 tested Connection 400V, 16A CEE plug Used machine, overhauled 6-month warranty + spare parts service Options: Maintenance contract Celqowc H Hpov Ifmogt Service package Instruction & commissioning Leasing & rental service We have a large selection of dough sheeters for you!

Condition: ready for operation (used), Year of construction: 1990, CNC Turning Machine Fabr.MONFORTS Type: RNC 4 Year 1990 Control FANUC 10TF-FAPT. Turning diameter max:250 mm Cgjlqsvgcwaev Ifmot Turning length : 1000 mm Spindle speed: 70-4000 rpm Spindle passage: 65 mm Hollow clamping device Chuck diameter 250 mm Röhm Tool turret 12 Pos.VDI 40 Tailstock MK 4 Complete machine documentation, chip conveyor. Complete weight approx. 7 500 kg.

Condition: new, mileage: 86 km, power: 85 kW (115.57 HP), fuel type: electric, gearing type: automatic, overall weight: 4,150 kg, next inspection (TÜV): 05/2027, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153122 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Heated rearview mirror Interior * Driver comfort suspension seat, suspended and heated * Automatic climate control Safety * Airbag Comfort and Environment * Automatic transmission Celev I I U Tjqv Ifmjgt * Heated steering wheel * Reverse traffic warning system * Lane departure warning system Other * 2-DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay and hands-free system * 3-year manufacturer's warranty from first registration to 100,000 km * 3-spoke multifunction leather steering wheel, heated * The vehicle has a one-day registration in June 2024 * Spare wheel carrier, double-locked * Hire purchase/financing or leasing available through Daimler Truck Financial Services Germany (DTFSD). We would be happy to provide you with a quote. * Engine version B "zero emission", eCanter * Interface, FMS fleet management system * Fuso safety package including floor mats * Mirror mount Medium, including wide-angle mirror * Windshield, green laminated glass, heated * Stabilizer, rear axle Other: * Nationwide delivery for €249 net plus VAT (€296.31 incl. VAT) * For all vans: 12 or 24-month Mercedes-Benz used car warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors * Subject to errors and prior sale ----.

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor SN:M54644051 + Tamagawa OSE 12.5KN-6-12-0 encoder SN:79441, used, normal signs of use, 100% functional, scope of delivery as per photos Celqv Ifoi D I N Romjgt

Condition: used, power: 123 kW (167.23 HP), fuel type: diesel, color: yellow, Year of construction: 2021, operating hours: 2,671 h, Year of manufacture: 2021 Field of application: Construction Empty weight: 22.990 kg CE mark: yes Price: On request Komatsu PC 210 LC-11EO. Year: 2021. Hours: 2671. Weight: 22.990 kg. CE Machine. 123 KW. Pads: 600 mm. 3th and 4th hydr. function. Mech. quick hitch. Camera. Airconditioning. 1 Bucket: 120x130x82 cm. UC: 80%. German Machine! ID NR: 308. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices. Celqv Iowgdkyefmegt

Year of construction: 2006, Condition: ready for operation (used), Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible. Cjlqv Iswg E Dzefmjgt

Year of construction: 2019, Condition: good (used), Scotsman MF66 Ice machine Cgelqvewaal To Ifmot Serial: EG006451 2019, Stainless, Modular super flake ice machine, up to 1220Kgs in 24hours, with stainless storage tank, with manual, 3Ph

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Cgolqv Ioid Aphsfmot Complete machine documentation available. Machine in stock.

Condition: used, mileage: 12 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2025, next inspection (TÜV): 05/2027, loading space length: 3,300 mm, loading space width: 1,800 mm, loading space height: 400 mm, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153128 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Trailer hitch / towing capacity 3,500 kg * Heated rearview mirror Interior * Automatic climate control Safety * Driver airbag Comfort and environment * Reverse alarm Multimedia * Radio with Bluetooth and hands-free system Other * 3-year manufacturer's warranty from first registration up to 100,000 km * AdBlue tank cover * Complete all-season tires Celov Sxkmeqv Ifmjgt * Trailer socket with electrical kit * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Three-way tipper 3300 x 1800 x 400 mm * Euro 6 Step E * Rear underride protection * LED headlights * Hire purchase/financing or leasing available through Daimler Truck Financial Services Deutschland (DTFSD). We would be happy to provide you with a quote. * Fuso safety package including floor mats * Medium-length mirror mount including wide-angle mirror * Valve extensions * Preparation for 12V battery disconnect relay * Limited-slip differential lock Other: * Nationwide delivery for €249 net plus VAT (€296.31 including VAT) * For all vans: 12 or 24-month Mercedes-Benz used car warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors * Subject to errors and prior sale ----.

Condition: used, Metso GP300S Funnel Celqv Iov Rn Dgjfmogt

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, Cslqjvb Hanjv Ifmsgt infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2012, Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 19931 2012 model Cgjlov U Sy Toqv Ifmjt Hour unknown Stationary

Condition: used, mileage: 7 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2025, next inspection (TÜV): 05/2027, color: orange, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153125 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Trailer hitch / towing capacity 3500 kg * Heated rearview mirror Interior * Driver comfort suspension seat, horizontal suspension * Automatic climate control Safety * Driver airbag Comfort and environment * Reversing alarm Multimedia * Radio with Bluetooth and hands-free system Other * 3-year manufacturer's warranty from first registration to 100,000 km * AdBlue tank cover * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free Cgelqev Shwcjv Ifmot * Euro 6 Step E * Rear underride protection * Rear tipper with box 3650 x 2100 x 400 mm * LED headlights * Hire purchase/financing or leasing available through Daimler Truck Financial Services Deutschland (DTFSD). We would be happy to provide you with a quote. * Fuso safety package including floor mats * Medium-length mirror mount including wide-angle mirror * Complete traction tires * Valve extensions * Preparation for 12V battery disconnect relay * Toolbox, bottom side * Limited-slip differential lock Other: * Nationwide delivery for €249 net plus VAT (€296.31 incl. VAT) * For all vans: 12 or 24-month Mercedes-Benz used car warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors * Subject to errors and prior sale ----.

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 11 K/min. Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Hot chamber temperature range: +50°C to +220°C. Cold chamber temperature range: -80°C to +70°C. Test chamber dimensions: Width: 470 mm. Depth 650mm Height 410mm External dimensions: Width 930mm Depth 2115mm Height 1970+mm Plug-in diameter 67mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 10 kW Cgelqvewb Dqij Ifmjt Rated current 25 A Refrigerant R404A / R23 Weight: 1000 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, mileage: 7 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2025, next inspection (TÜV): 05/2027, color: orange, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153125 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Trailer hitch / towing capacity 3500 kg * Heated rearview mirror Interior * Driver comfort suspension seat, horizontal suspension * Automatic climate control Safety * Driver airbag Comfort and environment * Reversing alarm Multimedia * Radio with Bluetooth and hands-free system Other * 3-year manufacturer's warranty from first registration to 100,000 km * AdBlue tank cover * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Euro 6 Step E * Rear underride protection * Rear tipper with box 3650 x 2100 x 400 mm * LED headlights * Hire purchase/financing or leasing available through Daimler Truck Financial Services Deutschland (DTFSD). We would be happy to provide you with a quote. * Fuso safety package including floor mats * Medium-length mirror mount including wide-angle mirror * Complete traction tires Cgjlqv Ijv Shwpofmjt * Valve extensions * Preparation for 12V battery disconnect relay * Toolbox, bottom side * Limited-slip differential lock Other: * Nationwide delivery for €249 net plus VAT (€296.31 incl. VAT) * For all vans: 12 or 24-month Mercedes-Benz used car warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors * Subject to errors and prior sale ----.

Condition: used, mileage: 12 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 03/2025, next inspection (TÜV): 05/2027, loading space length: 3,300 mm, loading space width: 1,800 mm, loading space height: 400 mm, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153128 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postal code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Trailer hitch / towing capacity 3,500 kg * Heated rearview mirror Interior * Automatic climate control Safety * Driver airbag Comfort and environment * Reverse alarm Multimedia * Radio with Bluetooth and hands-free system Other * 3-year manufacturer's warranty from first registration up to 100,000 km * AdBlue tank cover * Complete all-season tires * Trailer socket with electrical kit * Dual battery cover * Batteries, 2 x 12 V/100 Ah, maintenance-free * Three-way tipper 3300 x 1800 x 400 mm * Euro 6 Step E * Rear underride protection * LED headlights * Hire purchase/financing or leasing available through Daimler Truck Financial Services Deutschland (DTFSD). We would be happy to provide you with a quote. Cjlqsv Sxlksv Ifmegt * Fuso safety package including floor mats * Medium-length mirror mount including wide-angle mirror * Valve extensions * Preparation for 12V battery disconnect relay * Limited-slip differential lock Other: * Nationwide delivery for €249 net plus VAT (€296.31 including VAT) * For all vans: 12 or 24-month Mercedes-Benz used car warranty available upon request. * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing through Mercedes-Benz Bank. We would be happy to provide you with a quote. * No liability for printing or typographical errors * Subject to errors and prior sale ----.