Used Mc Cormick Mtx 185 for sale (2,911)

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 930 mm, spindle motor power: 15,000 W, total height: 2,100 mm, overall weight: 10,400 kg, controller manufacturer: FANUC, controller model: 18i, number of axes: 7, This Muratec MT 25 MC Lathe was manufactured in the year 2001 in Japan. It is equipped with a Fanuc 18i CNC control unit and has 7 axis. The machine has a spindle speed of 40-4000 rpm. Additional equipment • Bar loader multifeed, maximum bar length 1.5 meters. Machine Benefits Qualitative Machine Benefits • Tailstock does not have but the second spindle has torque control and can perform the torque control and can perform tailstock function. Technical Machine Benefits • Maximum chuck size: 254 mm • Max. Turning length 300 mm • Max. Turning diameter 380 mm • Length between centers 920 mm • Spindle nose a2-6 Nwodpfox D N I Asx Amush • Spindle inside diameter 67 mm • Max. Turning diameter x in manual 340 mm • Max. Turning length z in manual 920 mm • Max. Turning diameter x in automatic 340 mm • Max. Latheable length z in auto 920 mm Dimensions Machine Depth 2300 mm

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 167, Format (cm): 58 Equipment / Additional information: 1xreserve knife Nedpshu R U Dsfx Amuowh Very good condition // tested, checked and revised

Condition: like new (used), functionality: fully functional, power: 20 kW (27.19 HP), gearing type: hydrostat, fuel type: electric, color: blue, overall weight: 13,700 kg, empty load weight: 13,700 kg, operation weight: 13,700 kg, lifting power: 11,000 kg/m, lifting height: 10,000 mm, tire size: Voor 315×70-15 | Achter 250×70-15, tire condition: 90 %, axle configuration: 4x2, number of seats: 1, first registration: 02/2014, mast type: telescopic, Year of construction: 2014, operating hours: 286 h, Equipment: adjustable boom, crane, hydraulics, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 286 h Max. lifting capacity: 11,000 kg Total weight: 13,700 kg Power: 2 × 10 kW (80V electric motors) Drive type: Electric (battery 80V – 830Ah) Transmission: Front axle via gear reducer Steering system: Rear-wheel steering, hydraulic with load-sensing system Boom: Hydraulic telescopic boom (2 sections) Max. boom angle up: +60° Max. boom angle down: −10° Drive system: Electric with electronic speed control (MOSFET type) Tyres: Front: 4 × 315×70-15 | Rear: 2 × 250×70-15 (non-marking) Brakes: Hydraulic service brake, automatic parking brake Hydraulic system: Gear pump, 22 MPa maximum pressure CE certification: Yes (2006/42/CE – 2004/108/CE) Country of origin: Italy === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certification and full documentation included Ready for immediate transport and use Fully electric drive – zero emissions Hydraulic telescopic boom with two extensions Non-marking tyres, suitable for indoor use Includes hydraulic winch, enclosed cab, and working lights === CONDITION === Excellent condition – only 286 working hours. Crane fully tested and ready for immediate use. Available from stock. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price €89.999 (EXW / excl. VAT). The JMG MC 110 is a powerful electric industrial crane with a lifting capacity of 11 tons and a high-strength telescopic boom. Thanks to its electric drive, compact size, and non-marking tyres, this machine is ideal for use in production halls, warehouses, and maintenance environments. The MC 110 combines precision, safety, and zero emissions — a reliable solution for indoor lifting operations. === DELIVERY === Crane loading available on request for smooth handling during shipment. Flexible delivery options tailored to your destination and logistics preferences. All shipments are professionally handled by the logistics team of Collé Rental & Sales. Nwodpfexn Sm Aex Amujh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 632054, There are several machines of the same type/process available. Loading varies – both gantry and robot systems are used. --- (Please provide us with your offer price.) Sales only within Europe, including Turkey. Nwedpfxjzfwnae Amush Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Any warranty claims are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 165236.1, Offer 25418 Technical data: - Pressing force approx. 110 kN - Working stroke approx. 50 mm - Force stroke 12 mm - Overhang approx. 150 mm - Table size 280 x 180 mm - Adjustable installation height up to max. 300 mm - 2 manual controls Nwjdpfx Aozfh Hyjmuoh - Air inlet 6 - 8 bar - Total space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg

Condition: refurbished (used), functionality: fully functional, overall weight: 1,320 kg, load capacity: 185 kg, arm reach: 2,800 mm, controller manufacturer: ABB, controller model: IRC5, ABB IRB 6640-185/2.8 with IRC5 Controller, fully refurbished and with 6 months warranty - delivered into Europe duty paid so no additional costs on top Njdpfx Aozclklemuswh

Condition: good (used), Year of construction: 1999, Vertical machining center / EUMACH MC 1050 P - CE marking - Year of manufacture 1999 - Heidenhain 426 control system - Oil cooler - Complete documentation - COMPLETE TECHNICAL DATA - SEE PHOTOS Nwsdjx Ihh Eepfx Amujh Dimensions: L x W x H 2.8 x 3.45 x 2.8 meters / Weight 6500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, turning length: 532 mm, turning diameter over cross slide: 500 mm, turning diameter: 325 mm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, travel distance X-axis: 195 mm, travel distance Z-axis: 430 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total length: 2,875 mm, chuck outer diameter: 260 mm, total width: 1,675 mm, spindle nose: A2-8, overall weight: 4,650 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have acquired this HWACHEON HI-TECH 200BL MC directly from production in working condition—see the video of the machine operating prior to dismantling. The machine is very comprehensively equipped and comes standard with: - C-axis + driven turret (both positions). - Renishaw probe. - Chip conveyor + collection bin. - Röhm 3-jaw chuck (DURO-NC 260/3) including 2 sets of top jaws. - 13 EWS toolholders, 4 of which are driven. - Various clamping sleeves and collets. - Original HWACHEON and FANUC documentation. The machine can be inspected under power in our showroom! Nwedpfx Amjypc H Rouoh

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. Nodpfx Aeywua Tsmuswh If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 1,483 kg, load capacity: 185 kg, arm reach: 2,800 mm, ABB industrial robot with IRB 6640-185/2.8 Foundry Plus manipulator and IRC5 M2004 controller for industrial automation processes. The condition is used and tested. Typical applications include handling, foundry applications, machining, and general automation. The payload is 185 kg with a reach of 2800 mm. Manufactured in 2010, it has 47,532 operating hours and RobotWare 5.12.4003.04 software. It is equipped with a FlexPendant teach pendant, a robot connection cable set, a power cable, and a Foundry Plus protection version. Nwedpfxszamhtj Amujh

Condition: like new (used), Year of construction: 2020, I am offering furniture dollies/storage trolleys with the following dimensions: Width x Depth x Height: 2000 x 1150 x 1800/2000/2200/2400 mm ✅ Current stock: approx. 2,000 units ✅ Other sizes of furniture trolleys available on request. ✅ Each furniture dolly is fully refurbished (replacement of panels, pins). ✅ We provide a 1-year warranty on used furniture trolleys. • Stackable up to 3 units high • Wheels made of 100% polyamide, 4 swivel casters, 1 wheel with directional lock • Empty trolleys can be folded and nested into each other The furniture dolly is ideal for in-house transport and storage of almost all types of goods. Thanks to the triple stacking capability, the full storage height can be optimally utilized. Nwsdpfx Aexgifyjmueh All trolleys are in very good condition. Invoice provided as a matter of course. Transport available across Europe. KAM-KUB Logistic&Trolleys Europe – Your specialist for sales and service of furniture dollies in Europe.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). Nwjdpfx Aoyrn Raomujh - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working condition : excellent Njdpfxozfggfs Amuswh CE mark: YES instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) n.01 stop with blade diam.mm.550 motor power Hp 10 volt. 380/50

Condition: new, Year of construction: 2026, load capacity: 15,000 kg, total length: 6,430 mm, Electric forklift JMG MC 100.08 Nwodpfx Amjzagm Ajujh Drive Electric Year built 2026 Lifting weight (kg) 15,000

Condition: new, total length: 6,520 mm, Year of construction: 2026, lifting height: 2,470 mm, load capacity: 25,000 kg, - Ladegerät Hersteller: Zivan - Model: Battery Charger NG9 - Input: 400V, 12A, 50-60Hz - Output: 96V, 80A - hintere Hintergruppe mit zwei unabhängig voneinander drehenden Gruppen - Vorderachsenantrieb mit gegenläufiger Bewegung - großer Freihubmast - Abnehmbare Kontergewichte - Ausfahrbare Hintergruppe: 7720 mm Nedpfx Amszagmveujwh - Max Tragfähigkeit Gabel mit offener Hintergruppe: 25t@0.9m - Max Tragfähigkeit Gabel mit geschlossener Hintergruppe: 16.5t@0.9m - Antrieb: Vorderachser Antrieb mit gegenläufiger Bewegung N°2 Elektromotoren AC 12 kW 96V - Gesamtgewicht mit Gabeln Kg. 25.000 - Gesamtgewicht mit Ausleger Kg. 25.000 - Gabelhalterung und Gabelzahn: 3.000 kg - Gewicht vom Kranmast: 3.000 kg - Gewicht von den abnehmbaren Kontergewichten : 6.000 - Batterie: 96 V - 1050 Ah - Betriebsbremse: hydraulisch mit Fußsteuerung - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Lenkung: über die Hinterachse - Park- und Notbremse: hydraulisch mit automatischer Steuerung - Auslegerwinkel vom Mast+12°/-7° - Motor: N° 1 Elektropumpe AC 35kW 96V

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale is a vertical CNC machining center, STAMA MC015, based on FANUC ROBODRILL α-T14iA with a FANUC 16i-M control system. Equipment: 14-position tool changer High-speed spindle BT30 / SK30 tool holder Coolant system Compact design FANUC CNC control system With additional swivel/tilting table 5-axis machining possible Technical data: Travel ranges approximately X500 / Y380 / Z300 mm Up to 24,000 RPM Year of manufacture: 2000 Weight approximately 1800 kg Njdpfx Aey Uwvxemuewh

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Nodpfjwrcwpjx Amuswh Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Nwsdpfx Amezd Ta Nsuoh Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim Nodpfxsv Dauwj Amuowh

Condition: used, Year of construction: 1999, Technical details: Nodpfxeu Id Rbs Amuewh x-axis: 800 mm y-axis: 500 mm z-axis: 510 mm control: Siemens 840D number of spindle speeds: 36 - 10000 U/min. tool changer with: 42 tools tool clamping: 12000 N tool taper: SK40 max. torque on the spindle: 102 Nm feed continuous: X/Y/Z: min./max.: 1/10000 / 1/10000 / 1-10000 mm rapid traverse: X/Y/Z: 40/40/40 m/min voltage: 400 / 50 V / Hz total power requirement: 70 kW HIGH PERFORMANCE DRIVING COLUMN - MACHINING CENTER Coolant system with paper band conveyor chip conveyor make Flender MC535/x=800 hydraulic aggregate make HAWE Loading system Promo cutting values: max. milling capacity=400mm max. drilling Ø 50mm max. thread Ø M30 1 motor each for main spindle 1 + 2: make Kessler; 21 kW; speed 15.000 rpm. 1 motor each for X / Y / and Z-axis: Make Siemens; for X/Y axis 14.0 Nm and Z axis 17.6 Nm torque; speed 3000 rpm. *

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Nodpfx Aoy Txycomuewh Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: used, Year of construction: 2008, turning diameter 310 mm turning length 600 mm control Sinumerik 810 D PL Siemens turning diameter over bed 425 mm turning speed range - main spindle 500 - 4.500 min/-1 max. Torque 280 Nm Njdpfx Ajtqmqhsmuewh power capacity - main spindel 16,5 kW Spindle diameter 100 mm C-Axis 360 ° chucking diameter 210-52 mm spindle bearing diameter 120 mm clamping cylinder 65 mm Bar feed max. 65 / (52) mm spindle nose A8 DIN 55026 x-axis 230 mm z-axis 740 mm rapid traverse X-axis 15 m/min rapid traverse Z-axis 24 m/min tool positions turret 12 pos. driven statition 12 pos. tool taper VDI 30 DIN 69880 Spindle speed driven tools 6.000 min -1 power capacity - driven tools 3,7 kW max. Torque 9,5 Nm dia. of quill MK 4 80 mm quill stroke 120 mm tailstock adjustment 475 mm tension force 500 daN weight of the machine ca. 4,2 t dimensions of the machine ca. 3,7 x 2,2 x 1,8 m CNC - Turning- and Milling Center SPINNER - TC 65 MC - Turret completely overhauld

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Nsdpfx Amovzhiqsuewh Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 213 h, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 1,585 mm, fuel type: diesel, mast type: triplex, construction height: 2,338 mm, fork carriage width: 1,260 mm, empty load weight: 4,440 kg, drive type: Diesel, construction width: 1,450 mm, Rough Terrain Forklift Load Center: 500 Mast Type: Triplex Technical Condition: New Front Tire Size: Solidal 12 SL R4 Off-road Tread GESA Front Tire Condition: 80 - 100% Rear Tire Size: Solidal XTra 27x10-12 SKS Off-road Tread GES Rear Tire Condition: 80 - 100% Nwedswqtyfjpfx Amujh Battery Voltage: 12V Load Backrest, 3rd Valve, 4th Valve, Heater, Full Cabin, CE Certificate, Image may be a sample photo Paddle 100x45x1200 mm Exterior Mirrors Left and Right, Mechanically Suspended Plastic Seat, Road Lighting Halogen Front/Rear, Reinforced Battery Capacity 12V 110AH 750A, Radiator Metal Protective Grid, Ecostop, Raised Vertical Exhaust on Counterweight, Load Cushioning, Load Backrest Width 1260 mm LB1260, Mast Tilt 1210 Forward/Back, Rear Mud Flaps Rubber, Easy Link STD Module, Front Fender Extensions Metal, Total Width 1400 mm MI

Condition: excellent (used), power: 20 kW (27.19 HP), fuel type: electric, color: other, lifting height: 11,000 mm, mast type: telescopic, Year of construction: 2024, operating hours: 66 h, Drive: Wheel Empty weight: 19.800 kg Dimensions (LxBxH): 540 x 207 x 200 cm Lifting capacity: 16.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Lifting hooks - Work lamp(s) = Remarks = General Country of production: Italy Condition Nwsdpfx Aew I Hrbjmush CE type: CE Remote control, Manual Jib