Used Mc Cormick Mtx 165 for sale (6,315)

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Fjln Ueuhnwvo N Trjpg

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. Fpolnsu S A Ane U N Trog 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery.

Year of construction: 1996, operating hours: 91,897 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS x-way: 600 mm Fpjln U N Telruxfereg y-way: 560 mm z-way: 560 mm Control: Siemens MACHINE DETAILS supply voltage: 400 V / 3 phases / 50 Hz Connected load: 60 kVA total power requirement: 12 kW Machine weight: approx. 10 t EQUIPMENT - 2 machine pallets - 1 probe

Year of construction: 2003, operating hours: 33,792 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28840003282, TECHNICAL DETAILS x-way: 800 mm y-way: 710 mm z-way: 710 mm B-axis: 360 Control: Siemens Sinumerik 840D number of pallets: 2 pallet size: 500 x 630 mm tool diameter: max. 120 mm tool holder: SK 50 Magazine: chain magazine with 62/90 places MACHINE DETAILS Machine weight: approx. 12.5 t (transport weight) height: 3,2 m space requirement: 6,0 x 6,5 m Folnslruquo U N Trepg Rated power: 80 kVA Rated current: 120 A Operating voltage: 400 V / 50 Hz Compressed air: 6 bar

Year of construction: 2000, operating hours: 47,085 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm B-axis (table): 360° tool holder: SK 40 pallet size: 5 x 500x400 mm Control: Siemens 840D Fpsln U N Telrupaorsg MACHINE DETAILS supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Fpolnjn Uum Ho U N Trjg Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Condition: used, Year of construction: 2011,

Condition: as good as new (ex-display), Year of construction: 2021, Functionality: fully functional, grinding width: 1,350 mm, SCM wide-belt calibrating and fine sanding machine Model dmc sd 60 RCS 135 Technical data: Working width 1,350 mm min./max. working height 4-170 Sanding belt width 1,370 mm Sanding belt length 2,150 mm Main motor power 11 (15) kW (HP) Gear motor 0.45/0.8 (0.6/1.1) kW (hp) Feed speed 4.5/9 4.5/9 m/min. Standard equipment: - R140/85 rubber-coated calibrating roller diameter 140 mm 85 SH - 1st pos. - R160/45 rubber-coated sanding drum diameter 160 mm 45 Sh - 2nd pos. - Hard sanding pad with manual adjustment of the working height - Motor power 1 unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the power consumption - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - anti-kickback device in the infeed before the first unit - Rubber feed carpet 60 SH - Roller table with two rollers in the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering incl. the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation and deactivation of the roller 1. unit "R" + pneumatic activation and deactivation of the roller 2. unit "CS" + "MESAR" elastic link sanding shoe + pneumatic activation and deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50 + electronic adjustment of the working height 1 pc. CE safety regulations 1 pc. roller table in infeed and outfeed for long workpieces, equipped with 5 non-driven rollers Fpeln Uetwqn Se N Treg 1 "RA" inclined ribbed steel contact roller 1st unit 1 pc. Main motor 18.5 kW (PS 25)

Condition: ready for operation (used), Functionality: limited functionality, To be sold in a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but not put into operation. Freight basis: ex works Feln U Not Takaj Trjpg Location: 36110 Schlitz-Bernshausen Delivery time: immediately

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: BA 1XX, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rotary table diameter: 320 mm, TECHNICAL DETAILS Control system: Siemens Sinumerik 840D X-path: 1000 mm Y-path: 600 mm Z-path: 800 mm C-axis indexing: 0.0001° Turntable diameter: 320 mm EQUIPMENT - Tool cooling: external only - Tool measuring system: Renishaw Fjlnjufx Tpe U N Trjpg - Chip conveyor: available

Condition: excellent (used), Year of construction: 1999, operating hours: 15,000 h, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 15,000 h, spindle motor power: 6,000 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hurco BMC2416 with Ultimax control. It's really extremely good and simple. Very easy to understand controls Fpeln U Nst R Th Ts Trog Machine is still under power and can be viewed at any time. We only milled small parts, mainly from aluminum.

Year of construction: 1997, Condition: good (used), Maschinen-Details Lagernummer 1105-03282 Maschinenart Bearbeitungszentrum - Vertikal Fabrikat FAMUP Typ MCX 450 Baujahr 1997 Feln U N Togwlrajrspg Steuerungsart CNC Steuerung FANUC OMC Lagerort FRANKREICH Ursprungsland italien Lieferzeit sofort Frachtbasis EX WORK Technische Details x-Weg 450 mm y-Weg 300 mm z-Weg 400 mm Steuerung FANUC OM Spindeldrehzahl 8000 1/min Spindelmotor 5 kW Eilgänge x/y/z 30 mm/min Tischgröße 600 x 300 mm Werkzeugwechselzeit 0,9 sec Werkzeugmagazin: 16 FACH SK 30 Zusatzinformationen MIT CONTROL FANUC OMC 8000 RPM 5 KW 2.5 TONNEN MASSE 2 X 2.25 X 2.3 16 FACH MAGAZIN SK 30

Condition: used, Year of construction: 2022, front tire size: 800/65 R32, rear tire size: 540/65 R24,

Condition: ready for operation (used), Functionality: fully functional, 2 frequency inverters - MC07B0150-503-4-00 / FSC11B - 22.2kVA Fsln U Nst Swapj Tropg

Condition: good (used), Year of construction: 2006, Functionality: fully functional, number of spindles: 6, spindle speed (max.): 6,300 rpm, bar passage: 32 mm, TECHNICAL DETAILS Control system: SIEMENS SINUMERIK 840D PowerLine Work spindles: 6 pieces C-axis: Alignment and switching device Spindle clearance: 32 mm Spindle power: 6 x 4 kW Spindle speed: max. 6300 rpm Power at 100% ed: 6 x 4 kW Torque: max. 6 x 15 Nm Rapid traverse speed X-axis: 12 m/min Rapid traverse speed Z-axis: 12 m/min Travel distance - X: 68/100 mm Traverse path - Z: 68/100 mm MACHINE DETAILS Connected load: 107 kVA Machine length: 7000 mm Machine width: 1800 mm Machine height: 2400 mm EQUIPMENT - 5 cross slides for processing in X and Z - Pick-up spindle freely programmable in position 6 - 5 front spindles of which 5 can be driven - 4 U-axes electrically prepared - 1 axis for back machining on the pick-up spindle - Kraft and Bauer CO₂ fire extinguishing system - Hinged belt chip conveyor - Artis tool breakage control Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for rear end machining: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2004 Serial number 020440MA02 Bar length 3000 mm Knoll high-pressure system AE1114: Year of construction 2004 Filter system Pumps 5 bar and 40 bar individually adjustable, for the processing steps Heat plate exchanger Lifting pump from the chip conveyor Foln Ujufx Tcj N Tropg

Year of construction: 1998, Condition: good (used), Maschinen-Details Lagernummer 1105-02951 Maschinenart Bearbeitungszentrum - Vertikal Fabrikat FAMUP Typ MCX 700 P Baujahr 1998 Steuerungsart CNC Lagerort HAGUENAU Ursprungsland italien Lieferzeit sofort Frachtbasis EX WORK Technische Details x-Weg 700 mm y-Weg 500 mm z-Weg 640 mm Steuerung FANUC OM Spindeldrehzahl 8000 1/min Spindelmotor 22 kW Eilgänge x/y/z 40 mm/min Tischgröße 600 x 450 x 2 mm Werkzeugwechselzeit 1.5 sec Werkzeugmagazin: Fjln Uefklf Is N Trspg 30 SK 40 Gesamtleistungsbedarf 25 kW Maschinengewicht ca. 5.5 t Zusatzinformationen contrOL FANUC OM SPINDEL 22KW 8000 U/MIN spaenefoerderer

Condition: used, Year of construction: 2023, front tire size: 650/75R32, rear tire size: 600/70R24,

Condition: ready for operation (used), Functionality: fully functional, 1 piece Frequency inverter - MC07B0220-503-4-00 / FSC11B - 1.5kW Fpjlet Sv Rysn U N Trog

Condition: used, Year of construction: 2015, hydr. drive Weighing device / Fpelet Ebayjn U N Trog

Condition: ready for operation (used), Functionality: fully functional, 2 pcs. frequency inverter - MC07B0005-5A3-4-50 / FSC11B - 1,5kW Fpelnet Sv Hus U N Trjg

Condition: used, Year of construction: 2023, . / Fpjln U Nsr Ty Rfj Trsg

Condition: ready for operation (used), Functionality: fully functional, 9 pieces Frequency inverter - MC07B0015-5A3-4-50 / FSC11B - 1,5kW Fsln Uet Sv Eks N Trepg

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2004, Quantron P Terminal 3000L hopper approx. 12000ha spread tarpaulin working width / 27m mud flap hyd. Drive Lighting / Fpjln Ujtgqfdo N Trog