Used Mc Cormick Mtx 145 for sale (6,758)

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 26636, MC82 with new VC1 control (modernized in 2020) without welding control and without welding gun drive. Celqovnr Nzj Avgpjgt 30 ton press, 5 wide slides and Bihler reel type MH 1300 with noise protection cabin

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 2803-3500, feed length X-axis: 400 mm, feed length Y-axis: 320 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, For sale is an FP3NC with Heidenhain MC 320 control. The machine has recently been equipped with the control and the functions have been tested. The machine is offered without tools/vise. The table is included in the scope of delivery. Cjlq Avgot Dmx Eopogt On request, delivery throughout Germany is possible at cost.

Condition: good (used), Year of construction: 2001, Lathe Mori Seiki SL-204 MC year of construction 2001 Control MSG-805 Cslq Aveup T Rfegpsgt Travels: X 235 mm Z 520 mm max. diameter 390 mm turning length 507 mm top condition

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm Cjlqepgrzco Avgpsgt speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, clamping force: 10,000 kN, screw diameter: 95 mm, injection pressure: 1.795 bar, injection weight: 3,064 g, ejector stroke: 250 mm, opening stroke: 2,400 mm, TECHNICAL DATA Control unit: MC6 Injection force: 10000 kN Distance between the columns (H x V): 1400 x 1120 mm Distance of mold opening: 1700 mm Mold installation height: 700 - 1200 mm Opening stroke of the clamping platen: 2400 mm Ejector stroke: 250 mm Ejector force: 226 kN (reverse: kN 59) Screw diameter: 95 mm Ratio L/D: 23 Injection pressure: 1795 bar Injection volume: 3367 cm³ Injection size for PS: 3064 g Cgelq Avgsufhx Uopst Injection capacity: 690 cm³/s Closing force of the nozzle: 166 kN MACHINE DETAILS Connected load pumps: 90 kW Heating capacity: 61 kW Net weight: 65 tons Machine dimensions (L x W x H): 10.98 x 3.29 x 2.49 m

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, type of input current: three-phase, brakes: other, GEMATECH CTS40 MC Z22 5PP VACUUM CLEANER Year of manufacture -2016 Available - 6 pieces Power supply-[V] 400 Motor power-[W]4000 Protection class-[IP] 55 Insulation class-[] F Vacuum-[mbar] 230 Air flow without hose-[l/sec] 117 Sound level at a distance of 1.5 m-[dB(A)] 70 Main filter area-[cm²] 19000 Main filter type-Antistatic Inlet diameter-[mm]70 Tank capacity-[l] 50 Cgjljt N Tlvsq Avgpst Dimensions, L x W x H-[cm]. 1050 x 600 x 1250 Weight-[kg]114

Condition: good (used), Functionality: fully functional, axle configuration: 2 axles, first registration: 08/2017, loading space length: 2,500 mm, loading space width: 1,650 mm, loading space height: 1,930 mm, color: white, suspension: steel, brakes: engine braking, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, FIAT TALENT 1.6 145 ECOJET PMTA-WITH VARIABLE IMAGE ROAD SIGNAGE FORMER TRAFFIC AUDITORS-KM 202825- YEAR 08/2017-MOTOR REFURBISHED- CC 1600- HP 146- KW 109- EURO 6B- INTERIOR LENGTH 2500 mm- HEIGHT 1930 mm-. WIDTH 1650 mm- USEFUL LOAD CAPACITY 1058 KG-TOWING HOOK-ABS- AIR CONDITIONING- CENTRAL LOCKING- CONTROLS ON THE STEERING WHEEL- CABIN SEATS 3- ELECTRIC WINDOWS- ELECTRIC MIRRORS- FOR INFO DAVIDE Cgjlet Uzu Aeq Avgpjt

Year of construction: 2023, Condition: new, PLASM PLOTER MODEL MTX 2040 Ventilated Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Cgjlqsiphu Io Avgpet TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: -ventilated table -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: excellent (used), Year of construction: 2006, Machine in perfect condition, 100% functionaly, can be inspected during production Cslqjtuqcwo Avgpogt A lot of tools included

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Cgjlemzbr Sjq Avgpet Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: new, Year of construction: 2022, Functionality: fully functional, cooling capacity: 785 kW (1,067.30 HP), type of cooling: air, overall weight: 6,190 kg, total width: 2,330 mm, total length: 8,500 mm, total height: 2,640 mm, warranty duration: 6 months, AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) EER: 3.02 Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Bitzer SQDS4010214-CE Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Weight: 6190 kg. Cgelq Avsukg R Usgpot Working hours: 0/0 h. Condition: Never used, new

Condition: new, Functionality: fully functional, power: 242.71 kW (329.99 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/80R22.5, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, Ford Legacy 1833 4x2 DCAB E6 9 Speed AMT EQUIPMENT COMPACTOR FROM MC. 18 BRAND "COSECO". FACTORY NEW TO BE REGISTERED VARIOUS UNITS AVAILABLE IN OTHER LOCATIONS OF OUR GROUP WE ARE OFFICIAL DEALERS OF MERCEDES-BENZ D.E. TRUCK S.P.A. NAPLES OFFICE (NA) DOMENICO ESPOSITO S.P.A. EBOLI OFFICE (SA) OFFICIAL DEALER FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS Cgelq Asu Nnx Eovgpjt DOMENICO ESPOSITO S.P.A. EBOLI OFFICE (SA),NAPLES (NA) - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0 DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-CRANE-TIPPING-TARPAD-BOX-TAIL LOADER-COLD BOX-INSULATED WITH FRIDGE - VAN

Condition: used, Year of construction: 1998, Technical details: x-travel: 500 mm y-travel: 300 mm z-travel: 350 mm weight of the machine ca.: 5,7 t dimensions of the machine ca.: 286 cm x 276 cm x 290 cm mm x 2600mm (ohne Filteranlage u. Späneförderer) m tool magazin:: 36 tool taper: SK40 turning speed range: 0-9000 U/min main drive motor: 18 kW 2 Pallet Changer 500 mm x 300 mm incl. 4. axis , fixed on first pallet incl. filter mist model AFS 600 incl. BLUM tool setter incl. 20 pcs. SK 40 tools ( starter kit ) incl. internal cooling system ( IKZ ) 20 bar and paperfilter incl. chipconveyer incl. Machine documentation: circuit diagrams, electrical plans, operating instructions, etc. Miscellaneous: Machining is possible on the device bridge or the rotary swivel device. Very nice condition , from first hand ( optical industry ) approx 33.500 hours ( spindel ON ) Celeizxrnsq Avgpogt *

Year of construction: 2023, Condition: new, PLASMA PLOTTER MODEL MTX 2040 Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Cgolq Avgjiphrljpet Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDES OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: excellent (used), Year of construction: 2008, operating hours: 10,000 h, AUTOBOND mini 105 x 145 TPHES is an industrial laminator with a lamination speed of 120 meters per minute. Allows to laminate thin paper 90g / m2 and cardboard up to 650g / m2 in industrial volumes and with high quality. The main features are: a chrome-plated cylinder with a larger diameter of 350 mm, a powerful construction of the supporting frame - steel 25 mm, an autonomous heating and water recirculation system (Made in Switzerland) configurable module to prevent sheet curling (Smoothing), automatic perforation and sheet separator, film unwinding module with pneumatic tension control, film roll axis with pneumatic lock (convenient quick roll change system - a few seconds),circulation counter, Siemens control system, vacuum high-pile feeder with dividing head Heidelberg Speedmaster (index "H"), receiving device - high-drip acceptance, double-sided lamination in one pass (index "P"), large capacity acceptance (index "S"), works with any type of film.All New Electrically Heated (E) Calander unit Maximum sheet format 1060 Colq Avoumm H Usgpogt Minimum sheet size 297 x 210 mm Chrome cylinder diameter 250 mm Temperature 60 - 140 ° Film thickness 20 - 250 microns Density range of paper and board 90 - 650 g / cm2 Mechanical speed 120 meters / minute Clamping pressure 6 tons

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: MC-100, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Hard Turning Lathe Cgolq Avsvl S Dyegpot High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Year of construction: 2023, Condition: new, PLASMA PLOTTER MODEL MTX 2000/6000 Construction: steel+aluminum Working field: 6200/2200/1400 XY axis drive double-sided gantry drive: 4Nm stepper motors with gear ratios, gear strips grade 8 Z axis drive: stepper motor ball screw Double aluminum beam with special cross section for rigidity, durability Travel speed: up to 25m/min Z axis control system: THC My plasma system Linear guides: TBI, Automatic material detection system Power supply: 240V Permissible load: 3000kg Total weight: 2500kg USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails class 8 Y axis stepper motor and toothed strips class 8 Z axis stepper motor and ball screw Drives realized with TBI 20 brand rails Table equipped with a water grate-low operating costs (Water table, giving a cleaner cut, cooling the material and reducing gas emissions during processing) WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (MANUFACTURER OF THC) PROFESSIONAL GUIDE RAILS OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER TREATMENT COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES Cgoljiphrtjq Avgpjt WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Year of construction: 2023, Condition: new, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gear ratios, gear strips class 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Cgjlenfvmdsq Avgpst Linear guides: Hiwin Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1000kg net INCLUDED: - control panel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR - warranty It is possible to select the appropriate Hypertherm cutter to meet the individual needs of the company.

Year of construction: 2023, Condition: new, PLASM PLOTER MODEL MTX 1530 Ventilated Construction: steel+aluminum Working field: 3000/1500/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: Hiwin IGUS guide Automatic material detection system Power supply: 240V Permissible load: 1800kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Ventilated table adapted for fume extraction INCLUDED: -ventilated table -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Cgelq Avjnfvlgegpst Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Year of construction: 2023, Condition: new, PLASMA PLOTTER MODEL MTX 2030 Construction: steel+aluminum Working field: 3000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: HIWIN IGUS guideway Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING Cslq Avjnfu Tljgpjgt WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Year of construction: 2023, Condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: Celq Ash Rabnevgpsgt - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Cgslq Avslwtzyegpot Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, Brand: DMC Celorbyrpeq Avgpsgt Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Year of construction: 2015, operating hours: 5,900 h, Condition: used, Field of application: Construction Serial number: 7xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19459 Specifications: - 2015 model - Hours: Approx. 5900 - 3 fractions overdim - Hydraulic grate - Okay, okay. - Rollers (see pictures) - CAT engine - Diesel - Engine service is done by PON - Ready for delivery Description: Cgslq Avgevyfgkspst McCloskey 3 covers screening works from 2015. 3 fractions overdim. Ready for delivery. Hours: 5900

Condition: used, Year of construction: 2021, operating hours: 4,000 h, 2021 | McCloskey | McCloskey J45 Jaw | Used Crusher | 4000 hours 📍Location: France, Le Grand-Quevilly 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 230000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 73 inspection points 70 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher was operating at the job site at the time of inspection. All functions were tested and operated properly. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38980 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines Cjlq Avewg Ew Uegpjgt ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation