Used Fordson Dexta 2000 for sale (10,456)

Condition: used, Applicable material: Fuel Boln Ulswf Saaj Itjwl

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm coil external diameter 1500 mm power requirement 1,0 kW Bslnsvuuapj Ul Itswl weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: excellent (used), Year of construction: 2002, JUN-AIR Compressor Model 2000-40M Power (HP) 12.2 bar Continuously adjustable Volume 40 liters Integrated air dryer In very good condition Only 118 operating hours in a clean environment. Bwoln Ulov N Hads Itsl Dimensions (LxWxH) in mm: 650 x 670 x 860 Swivel casters with parking brake Noise level up to 50 dB, suitable for use in noise-sensitive environments.

Condition: like new (used), Functionality: fully functional, Year of construction: 2021, Essentially consisting of: Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system Bwoln Usq Tcmvsl Itsl

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. disc diameter: 1000 mm Motorized drive via foot switch Belnjwb Efze Ul Itowl

Condition: good (used), Year of construction: 2010, 1x used Krauss Maffei KM 300-2000-380-CX with robot, safety fence, conveyor belt, and turntable! Year of manufacture: 2010 Machinery No. 61014333 Horizontal screw: 70 mm Belnewgb Ene Ul Itswl Vertical screw: 30 mm Core pulls: 4x Hot runner control stations: 16 zones The machine is available immediately!

Year of construction: 2017, Condition: good (used), Endogas generator (endothermic protective or reaction gas) Generation capacity 24 - 60 m3/h H2/CO/N2 mixture Operating temperature 1000 °C Regeneration temperature 870 °C Electrical heating Gas consumption (input) Natural gas 13.8 m3/h Propane 9.6 kg/h Nitrogen 2 m3/h Bwoln Ulev Nakij Itol Electrical connection 27 kVA IPSEN EndoSave control system

Condition: new, Year of construction: 2025, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Beln Ulsuia Nto Itswl Technical Details: • Length 2000 mm • Width 3000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. Bsln Uswgbuisl Itswl - Coolant system.

Condition: excellent (used), For sale is an M+R (M&R) gas dryer for e.g. textile printing. Fully functional. Can be viewed. The conveyor belt is approx. 1.5m wide. The dryer is approx. 7m long Bwjln Ul Iju I Umyjtel

Condition: excellent (used), Year of construction: 2017, Vibrating Screen Type IFE in very good condition Bwsln Ul Ijwbh U Sjtjl - screen surface 4000 x 2000 mm - large mesh size - cover included ready to go

Condition: good (used), Year of construction: 2007, operating hours: 55,000 h, 1x used Arburg 570C 2000-800 Golden Edition Year of construction: 09/2007 Ma-No. 206432 Auger: 50mm Blow-off valve: 2x Core pull: 1x Handling interface Host computer interface Printer interface Interface for inking unit Bwsljwgb Ebjn Ul Itel Connection for conveyor belt via 5-pin plug Connection for selection unit The machine is sold without any other visible peripherals / tools!

Condition: used, • No. 11077 /111 • For the production of cross bars for insulating glass • Year of manufacture – 1994 • Price upon request Boln Ul Ijwcm H Netswl

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Equipment and technical data: max. edge thickness 3 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 300 mm min. Workpiece width 70 mm Feed speed approx. 10 m/min Ready for operation approx. 6 min. Power consumption 7 kW Rapid heating adhesive container High-frequency cross-cut saw High-frequency flush trimmer (with combined interchangeable plate cutter for radius, straight and chamfer trimming) Bjlnor H Rlgs Ul Itowl Extraction nozzle 100 mm Dimensions: 330x140x130 cm Weight 550 kg Availability: short term Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - Multifix C - Movable control panel along the entire length - Extendable chip tray - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen in 16:9 format - For manual machines, the Cycles can be processed without creating a program header - Siemens control option: residual material detection - Absolute encoder (i.e., no reference point travel required) - USB interface on the control panel Bslnswgbtrj Ul Itewl - Manual tailstock with drag device and 100 mm spindle diameter - Automatic central lubrication - Coolant system

Year of construction: 2011, Condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € Bjln Ulowa Uglo Itowl - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head

Condition: good (used), Year of construction: 2005, Functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used and tested Year: 2004 (Multiple Options Available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Bslsq Hfahon Ul Itewl As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: new, F201CV-2K0-PGD-88-V, Bronkhorst, Digital Mass Flow Controller, 2000 sccm H2 Model: F201CV-2K0-PGD-88-V Bwelnsvrg Elj Ul Itol Condition: New

Condition: excellent (used), mileage: 29,750 km, power: 162 kW (220.26 HP), first registration: 02/2002, fuel type: diesel, color: red, axle configuration: 4x2, fuel: diesel, wheelbase: 3,680 mm, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2002, Equipment: ABS, trailer coupling, = Additional Options and Accessories = - Leaf Spring Suspension - Air Horn - Radio/CD Player - Side Door - Sunshade - Toolbox - Power Take-Off (PTO) - Central Lubrication - Drawbar Hitch = Additional Information = General Information Cab: Double Technical Information Number of Cylinders: 6 Axle Configuration Suspension: Leaf Spring Suspension Front Axle: Max. Axle Load: 4450 kg; Left Tire Profile: 90%; Right Tire Profile: 90% Rear Axle: Twin Tires; Max. Axle Load: 8500 kg; Left Tire Profile: 90%; Left Outer Tire Profile: 90%; Right Inner Tire Profile: 90% Right outer tire tread: 90% Bweln Uewfhd Iel Itel Dimensions Dimensions (L x W x H): 693 x 238 x 310 cm Weight Unladen weight: 6,670 kg Payload: 5,320 kg GVW: 11,990 kg Condition Technical condition: very good Visual condition: very good Further information Contact Andre, Henri, or Andre for further information.

Condition: used, Year of construction: 2010, Used machine Year of construction 2010 Technical data: - Voltage: 230 V 50/60 Hz, 120 V 60 Hz - Power: 765 W - Max. Edge height: 45 mm - Edge thickness: 0.4-3 mm - Digital stepless temperature setting: 120-200 °C - Feed speed: 0.5-4.0 m/min - Glue basin capacity: 150 cm³ - Warm-up time: 10 min - Weight: approx. 4 kg - Including table frame - with accessories Availability: short term Location: Hochheim Bwjln Uounczwel Itol

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm Belnsuia I No Ul Itswl • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Year of construction: 2011, Condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Boln Uewa Uf Ujl Itewl Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head

Condition: ready for operation (used), controller model: Num 1040, swing diameter over cross slide: 7,500 mm, Robuuste draaibank met 4 geharde lineaire geleidingen Maximaal werkstukgewicht: 60 ton Hydraulisch contrapunt = automatische compensatie Kruisslede uitgerust met twee CNC gestuurde gereedschapshouders Siemens aandrijvingen en motoren Heidenhain-linialen en encoders Super Lathe principe/licentie van Binns Machinery (USA). De ultieme prestatie voor zware draaibanken bedoeld voor staalfabrieken, rolgieterijen, smederijen voor het maken van producten zoals turbinerotoren, grote assen en staafproductie. Meest opvallende verschillen met een normale draaibank: veel breder bed = zeer hoge stijfheid = geen trillingen meer zwaar en omvangrijk rijtuig ook voor stijfheidsdoeleinden zware werkstukken kunnen tussen de centers worden geplaatst het totale gewicht van de roldraaibank is erg hoog Swing over bed: 2000 mm Swing over cross-slide: 1700 mm Bsln Ul Iewaivbstjwl Power on the spindle: 110 kW Number of speeds: 0,7 > 70 rpm

Condition: used, FC 2000, IFSYS, vibration control Model: FC 2000 Bwsln Ul Ijvrhi Eotjl Condition: Used

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system Beln Uoryyhcjl Itewl L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim