Used Fordson Dexta 2000 for sale (10,445)

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Twin Shaft Ribbon Mixer Brand Seydelmann Cjlq Srewa Ufzobkogt Model P 2000 Machine number: 05220-1 Year of construction 2005 Power 10 kW Voltage 400 V, 50 Hz, 39 A Pressure 6-10 bar Dimensions 3050 mm x 1800 mm x 2340 mm

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 Cslq Srbswa S Imeksgt - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: used, Year of construction: 1992, x-travel 1700 mm Cjlq Sjtqqxforbkogt y-travel 800 mm z-travel 890 mm table surface area 2000 x 630 mm spindle taper SK 50 spindle turning speed range 35 - 3000 U/min spindle drive 26 kW feeds longditudinal/cross/vertical 6 - 5000 mm/min rapid traverse 15 m/min table load max. 6000 kg control HEIDENHAIN control TNC 360 total power requirement 45 kVA weight of the machine ca. 13 t dimensions of machine L x W x H 5,2 x 2,78 x 2,95 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolant

Condition: used, Year of construction: 1988, Automatic double tenoning machine Maximum length 2000mm Swivel heads, tilting motors Cgelq Srbjv Hmu Asket Maximum thickness 100mm Automatic coin loader Power 6.5kw

Year of construction: 2000, Condition: ready for operation (used), A large Untha recyclable material shredder for plastics is ve power: 110kW, cutting unit opening X/Y: 1840mm/2000mm, cutting system: ÜSS S36, shafts: 1, machine dimensions X/Y/Z: 3750mm/2950mm/2650mm, weight: approx. luding hopper, base frame, press-in device and various perforated screen umentation available. Colq Srbswaa Ibskogt

Condition: good (used), Year of construction: 2018, machine/vehicle number: 623767, Offer 24502 Technical specifications: Cgelq Srsv U Tf Dsbkst - Boiler capacity 2000 L - Operating pressure 11 bar - 2 maintenance ports - Shut-off valve - Boiler diameter 1100 mm - Space requirement approx. W 1450 x H 2400 x D 1140 mm - Weight approx. 700 kg

Condition: used, Year of construction: 2024, operating hours: 30 h, total height: 5,380 mm, total width: 4,170 mm, total length: 5,250 mm, RECU UZ 2000 Universal open-type shredder. Manufacturer: Recuperma Type: RECU UZ 20000 Particularly suitable for gentle and rapid composite material disintegration. Disintegration, composite separation, and volume minimization. Operating principle: -Use of flexible impact elements -Shredding through the impact effect of the infeed material -Shredding to different grain sizes Throughput: The hourly output depends on the grain size and specific gravity of the material being processed. Cgolq Srbjv U Ttbokot Technical specifications (+/- 5%): Drive power: 250 kW approx. 1490 rpm Drive type: Belt drive PTO: Hydraulic unit approx. 1.5 kW Control system: SIEMENS Frequency converter, SEW Drum diameter: 1900 mm Weight: 25 t HB450 wear plate lining Material feed via hopper Material discharge via sliding door Machine currently defective. Price refers to repaired machine. Price unrepaired: €370,000. Transport not included.

Condition: used, Year of construction: 2000, total length: 1,350 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 1.600 kg Price: On request - Year: 2000 - Documentation available: No - CE mark available: Yes - Serial number: 0006001 - Control: Conventional - Motor power: 29.0kW - Transport dimensions: 1350mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cgolqov Stlxo Srbket Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2008, machine/vehicle number: 8504, Make: AXA Type VHC 50 / 2000-XTS Year of manufacture: 2008 Control: CNC CNC moving column machining center AXA - VHC 50 2000-XTS - 5 axes - NC rotary table WITHOUT chuck shown - Infinitely variable positioning of the swivel milling head - Pick-up station Cjlqjqy E Aps Srbkjgt Technical details / accessories / add: x-way vert. 2.000 /hor. 1.400/2 mm y-path vert. / hor. 900 mm z-path vert. 1,200 / hor. 940 mm Control iTNC 530C Heidenhain Distance between spindle nose and table vert. 0 - 740 mm Distance between spindle nose and table hor. 250 - 1,050 mm Main spindle: Speed range - main spindle 30 - 7,500 min/-1 Drive power - main spindle 25 kW Max. Torque 540 Nm Tool holder SK 50 DIN 69871A Tiltable +/- 115 ° Resolution 0.001 ° NC rotary table: Face plates diameter 1,500 mm Table speed 20 min/-1 Max. table load approx. 1,500 kg Tool changer: Number of tool positions 60 pos. SK 50 tool holder max. tool diameter 110 mm max. tool diameter with free neighboring box 180 mm Max. tool length 400 mm max. tool weight max. 15.0 kg Changing time approx. 8.0 sec Feed rates: rapid traverse ( X / Y / Z ) 30 / 30 / 25 m/min Total power requirement 75 kVA Machine weight approx. 33.0 t Space requirement approx. 10.0 x 7.0 x 4.0 m Chip conveyor Coolant system High pressure cooling Internal coolant supply Oil mist extraction Paper belt filter B-axis Swivel milling head Hydraulic unit various tool holders approx. 10 pcs. Tool changer 60-fold measuring probe electr. handwheel Operating mode 4 Errors in technical data excepted. machine has been freshly repainted inside and out.

Condition: used, Technical details: turning diameter over bed: 540 mm turning diameter over support: 280 mm centre height: 265 mm spindle bore of work spindle: 65 mm Celowa I Shoq Srbkegt range of revolution per miute: 9...18000 / 24 step U/min total power requirement: 1,5 kW weight of the machine ca.: 3,6 t

Condition: good (used), Year of construction: 2003, Weinig Powermat (Unimat) 2000 Speed All Powerlock spindles Bottom 15kW 8,000 RPM Right 15kW 4,000 to 12,000 RPM with inverter Left 15kW 4,000 to 12,000 RPM with inverter Top 22kW 8,000 RPM Top 22kW 4,000 to 12,000 RPM with inverter Bottom 15 kW 4,000 to 12,000 RPM with inverter 11kW feed motor. Feed speed 40m/min Cgsljwaiizeq Srbkst Automatic lubrication system. Separate control panel Full documentation Possible to supply with automatic infeed and outfeed if needed.

Condition: used, Year of construction: 2011, turning diameter max. 320 mm turning length max. 810 mm control MSX-701 IV greates pass round over bed 800 mm Swing dia. over traverse guideway 800 mm distance between spindles 1.130 mm Number of revolutions max. 5.000 rpm power capacity - main spindel 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm Number of revolutions max. 5.000 rpm power capacity - Sub spindle 25 / 22 kW max. Torque 358 Nm spindle diameter in front bearing 120 mm spindle bore 73 mm max. usable bar diameter 65 mm C-Axis 0,001 ° spindle nose JIS A2-6 collet chuck 160 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Shank diameter 20 x 20 mm Drill shank diameter 32 mm turret change time 0,18 sec. x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm Traverses Subspindle B: 870 mm rapid traverse ( X / Y / Z ) 1: 30 / 20 / 50 m/min rapid traverse ( X / Y / Z ) 2: 30 / - / 50 m/min Tipp feed 0 - 5.000 mm/min total power requirement 94 kVA weight of the machine ca. 8,3 t dimensions of the machine ca. 10,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 2000 T2Y - Main- and Subspindle Cgolq Srbsv E R E Nekst - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Year of construction: 2024, Condition: used, New: Yes Serial number: ACB4688C05 Cgslep T Smwjq Srbket Transport dimensions (LxWxH): 0,63x0,42x1,13 Please contact DPX Power, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: used, Year of construction: 2008, Technical details: Cslq Srewdv Dtsbkjgt x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm spindle speed:: 16.000 U/min HSK-63 WZ pick-up 4 additional pallets without fixture Extensive overhaul with new spindle in 2023 Geometry check at the end of 2024 *

Condition: used, Technical details: faceplate diameter: 1800 mm Cgjlevb Db Neq Srbket swing diameter: 2000 mm turning height: 1170 mm z-axis: 1000 mm cross rail adjustment - vertical: 800 mm faceplate speeds:: 2,5 - 280 workpiece weight: 12 t feeds: 1 - 6000 mm/min max. torque on the faceplate: 50000 Nm total power requirement: 85 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders *

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: Clear float glass Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. EQUIPMENT Cslq Srbov U Rh Ajkogt - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2050 Measurements depth 2695 Measurements height 2120 Machine weight 5800 Main Drive Spindle speed range 5000 / Sub-spindle: 6000 rpm Spindle motor power 15/15/11 kW Sub-spindle: 11/7.5 kW Spindle bore 73 mm / Sub-spindle: 43 mm Number of axis 4 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement 100 (±50 mm) Y-Axis Rapid Traverse 10000 mm/min Z-Axis Movement 590 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 564 mm B-Axis Rapid Traverse 400 min⁻¹ Workpiece Workpiece drm over bed 923.8 mm (579.8 mm with front cover) Workpiece drm over support 755 mm Workpiece drm 356 mm Additional Equipment Gantry loader for automatic loading and unloading This 4-axis MORI SEIKI NL 2000 SY /500 turn-mill centre was manufactured in 2007. Ideal for precision machining, it features a robust design and advanced control system. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY /500 machine we have for sale. Contact us for more information. Application Types Turning Cslq Srev Addyobkjgt

Condition: good (used), - Used machine (700-6007) - Max. edge thickness: 8 mm Cgelq Ssupy N Isrbkst - panel thickness: 50 mm - Feed rate: 11 m/min - Power consumption: 11 kW / 400 V - Work table height: 900 mm - Gluing unit - Snipping unit - Flush trimming (radius, grade, chamfer) - LxWxH: 3300 x 1400 x 1300 mm - Weight: 550 kg - from place - available from December 2024

Year of construction: 2008, Condition: good (used), Müller SEL 2000 edge sanding machine. Used to grind 45 degree edges on workpieces. Cgolq Srbelzgnksket

Condition: excellent (used), We are offering a Busch WV 2000 C, NC 0300 B vacuum pump set. The pumps were rarely used and came from a solar factory. Cgjlqjv U Ru Ao Srbket

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, turning diameter: 330 mm, spindle bore: 65 mm, rotational speed (max.): 5,000 rpm, type of input current: AC, overall weight: 5,850 kg, For Sale: CNC Lathe – Doosan Puma 2000LSY (Year 2004) Technical Specifications: ✅ Brand & Model: Doosan Puma 2000LSY ✅ Year of Manufacture: 2004 ✅ Control System: Fanuc 18i-TB ✅ Main Spindle Speed: 5000 rpm ✅ Sub-Spindle Speed: 6000 rpm ✅ Bar Capacity: Ø65 mm ✅ Turret: 12 tool positions Machining Capabilities: ✔ Max Turning Length: 760 mm Cjlq Srov Ub Nwebkjgt ✔ Max Turning Diameter: 330 mm ✔ X-Axis Travel: 250 mm ✔ Y-Axis Travel: ±50 mm ✔ Z-Axis Travel: 830 mm ✔ B-Axis Travel: 830 mm Additional Equipment: 🔹 Chip conveyor 🔹 Tool measurement probe Comes with a generous selection of holders, jaws, and more – see pictures! Included: LNS Servo 2 bar feeder. Feel free to contact us!

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Cgelq Srev U Ralebket Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2050 mm Measurements depth 2695 mm Measurements height 2120 mm Machine weight 5800 kg Cslqjv Addao Srbkegt Main Drive Spindle motor power 15/15/11 kW Additional Equipment Number of tool stations: 12 (10) Shank height for square tool: 25 mm Boring bar tool shank: Main Spindle: Max 50 mm / Sub-spindle Max: 32 mm Turret switching time: 0.25 s Max speed of driven tools: 6000 rpm Driven Tools and Y-Axis (SY Model): Provides milling and drilling capabilities; allows for off-center milling Bar Feeder and Gantry Loader: With 20-Station Magazine / Dust Extraction System: LTA system / Additional Tank: 500 liters / Knoll Pump: 80 Bar Pressure This 4-axis MORI SEIKI NL 2000 SY /500 turn-mill centre was manufactured in 2008. Ideal for precision machining, it features a robust design and advanced control system. Consider the opportunity to buy this MORI SEIKI NL 2000 SY /500 turn-mill centre. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2010, Corner Crimping machine Cgolq Srbepaid Uokot

Condition: used, Year of construction: 2000, Overview  This Selena CH Albagnac labeling machine was manufactured in 2000 and is designed for labeling wine and cava bottles. It can handle up to six different bottle models and has three labeling stations, including one for neck or medallion labels. The machine is being sold because the operator needs a new machine with additional functions, in particular another labeling station. Technical details  Bottle compatibility: adaptation for six different bottle models Labeling stations: 3 (including one for neck or medallion labels) Output: Cava: 500 bottles/hour (with neck/medallion label) Wine: 1,400 bottles/hour (depending on the capsule) Capsule dispenser: Customizable for different bottle types Cap types: Cava: standard and special bottles Wine: cork and screw cap Automation & programming Electronic control of the labeling heads Possibility to create individual labeling programs Colq Ssv Eampjrbkogt