Used Fordson Super Major for sale (4,508)

Condition: used, Functionality: fully functional, machine/vehicle number: H2X396B00624, Year of construction: 2011, operating hours: 15,460 h, load capacity: 8,000 kg, lifting height: 4,450 mm, fuel type: diesel, mast type: standard, construction height: 3,330 mm, fork length: 1,800 mm, engine type: Deutz, drive type: Diesel, net weight: 11,905 kg, Diesel forklift truck Fahrgestellnummer: H2X396B00624 Load center: 500 Fork width: 250 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tires Type: Superelastic Front tires Condition: 60 - 80% Rear tires Type: Superelastic Rear tires Condition: 60 - 80% Description: Workshop tested with UVV approval Sideshift, fork positioner, Kaup 10T466IZ 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, half cab, soot filter, CE certificate, twin tires, interior mirror, Door right available Dehjq Sgphsx Dzdrjut

Condition: used, Fasti 2095-32-2 folding machine In good condition Receive a completely new PLC control from the manufacturer Schröder-Fasti in 2022 Machine number: 95 295 020 operating voltage: 400V frequency: 50 Hz Control voltage: 230 V Connection power: 4,25 kW Rated current: 16.8A usable length: 3240 mm Sheet thickness: 2 mm Lift of the superstructure: 350 mm Adjustability of the lower and bending beams: 80 mm Important NOTE: the machine got a new PLC control in 2022 Control brand: Schröder-Fasti Type: CFP120 Total weight: 6000 Installation dimensions: 4500x3000x2000 (mm) Dujhx Dzowavndodrjt Operating hours: 4574

Condition: good (used), rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, overall weight: 116 kg, FANUC A06B-0826-B300 Servo Motor Manufacturer: FANUC Model: A06B-0826-B300 Condition: Used Weight: 116 Kg Dushx Dzjvuyqaodrjt (Comes from SUPERMAX YCM-V85A Machining Center)

Condition: used, mileage: 767,058 km, power: 355 kW (482.67 HP), first registration: 06/2019, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 05/2025, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: air conditioning, parking heater, DAF XF 480 6x2 swap body chassis Dshswaupgjx Dzdrout Reg.: 06.2019 * Retarder * Stationary air conditioning * SuperSpaceCab * 2 sleeping berths * Cooler box * Tires approx. 30-50% (315/70R22.5) * 2 aluminum tanks * German vehicle

Condition: used, mileage: 575,000 km, power: 427 kW (580.56 HP), first registration: 10/2019, fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, parking heater, retarder, sleeping cabin, trailer coupling, = Additional options and accessories = - Air horn - Air suspension - Disc brakes - Electrically adjustable exterior mirrors - Electric windows - Fog lights - Gullet - High Beams - Immobilizer - Lift Axle - Power steering - PTO - Radio - Radio CD player - Seat heating - Sleeping cabin - Speed limiter - Sper - Steering Axle - Toolbox = Remarks = Scania R580 V8 NGS, 2019, 575000 km, Euro 6, 6x2 with steering axle, Retarder, 15500 Liter stainless steel tank, 4 Compartments = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Number of cylinders: 8 GVW: 28.000 kg Extendable superstructure: Yes Duehx Dewanh Nozdret = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, power: 420 kW (571.04 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: retarder, emission class: euro6, suspension: steel-air, Year of construction: 2024, machine/vehicle number: NEW-5, Equipment: ABS, air conditioning, crane, cruise control, differential lock, hydraulics, navigation system, parking heater, retarder, sleeping cabin, soot filter, traction control, trailer coupling, IVECO X-WAY chassis for wooden superstructures Vehicles 2 vehicles in stock !!!! Only available in white and red, in stock !!! * Cursor 13 engine, 570 HP EuroVI * Transmission 12 -gear HiTroniX, automated * Retarder / Intarder for ZF gearbox * Wheelbase 4500 mm * Leaf/air suspension * 385/65 R22.5 - 315/80 R22.5 tires * Trailer coupling, Ringfeder make * Fuel tank 710 liters, AdBlue tank 80 liters * Front headlights - LED version, LED tail lights * Active Space, large-capacity cab * Electric cab tilting system. Operation with remote control at the front of the vehicle * Electric lifting roof * Fully automatic air conditioning in conjunction with stationary air conditioning system Dushx Dzjp Spcnedret * 2 sunbeds * Premium refrigerator with freezer compartment incl. thermo-insulating box, 2x USB socket, 1x 230V socket * Driver's seat Hl-Comfort, multi-adjustable, air-sprung, integrated headrest and integrated, height-adjustable seat belt, lumbar support, with 3-stage cooling or heating function * Luxury front passenger seat, swivel, multi-adjustable, air suspension, armrests, integrated headrest and integrated seat belt, heatable, with lumbar support * Axle load indicator in the instrument cluster * Hill start assist (Hill Holder) for comfortable starting on inclines * Lane Departure Warning System (LDWS) * Emergency Brake Assist (AEBS) * and much more. Available in addition to the chassis Body: PAVIC OPTIPA steel short timber body with aluminum bulkhead and 4 OPTIPA SL stool bodies with 8 OPTIPA AL10 aluminum stanchions. Loading crane: TajfunLIV 120Z 9.6 , TajfunLIV 150Z 9.6 (each also as cabin crane) Epsilon M12Z Classic 10.5 , Epsilon Q150 Z 9.6 Financing / installment plan, as well as leasing / partial amortization leasing is possible with our leasing partner. Our sales team will be happy to answer any further questions you may have. This is a non-binding offer. Subject to prior sale, errors and changes. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10000.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months Duehx Djh Ia Trszdrot - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, mileage: 441,214 km, power: 265 kW (360.30 HP), first registration: 01/2013, fuel type: diesel, color: other, axle configuration: 8x2, tire size: 315/80 R22.5, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: other, loading space width: 2,500 mm, loading space length: 7,800 mm, Year of construction: 2013, Equipment: air conditioning, crane, cruise control, differential lock, = Additional options and accessories = - Adblue system - Climate control - Electrically adjustable door mirrors Dehewahtrjx Dzdreut - Electrically operated windows - PTO - Radio - Spare wheel - Toolbox = Remarks = Axles Configuration: 8x2 Tailgate Platform length: 380 cm Crane Number of hydraulic extension: 2 Number of stamp: 2 Load hook: ✓ Capacity meter: 8,2 m Capacity kilo: 6500 kg View more pictures and video's at Or visit our YouTube channel: Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = Drivetrain AdBlue system: Yes Transmission Transmission: 12 gears, Automatic Axle configuration Tyre size: 315/80 R22.5 Brakes: disc brakes Front axle 1: Steering; Tyre profile left: 30%; Tyre profile right: 35%; Suspension: leaf suspension Front axle 2: Steering; Tyre profile left: 45%; Tyre profile right: 38%; Suspension: leaf suspension Rear axle 1: Double wheels; Differential lock; Tyre profile left inner: 50%; Tyre profile left outer: 40%; Tyre profile right outer: 5%; Tyre profile right outer: 50%; Suspension: air suspension Rear axle 2: Double wheels; Lift axle; Tyre profile left inner: 45%; Tyre profile left outer: 45%; Tyre profile right outer: 70%; Tyre profile right outer: 60%; Suspension: air suspension Measures Dimensions (LxBxH): 1160 x 255 x 360 cm Weights Empty weight: 16.340 kg Carrying capacity: 15.660 kg GVW: 32.000 kg Max. towing weight: 35.500 kg Functional Crane: Hiab 166 E-2 HIDUO, year of manufacture 2012, behind the cab Height of cargo floor: 125 cm Extendable superstructure: Yes Condition Number of keys: 2

Year of construction: 2002, Condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Dshx Dzdjhzbiporsut Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: A11108GM1, Costa K6 CCC 1350 Wide Belt Sander Dshx Dzswczkisdrout Year of production: 2001 Technical condition: very good after major renovation at COSTA in 2023 Costa K3 CCC 1350 Wide Belt Sander sander from 2001 is a solid industrial machine designed for sanding and calibrating wooden surfaces. The machine has a fixed table and a movable working part with rollers Fixed working height of 890 mm can be installed in a line The additional machine has a vacuum table powered by its own fan Here are the key technical data of this machine: - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration shaft, 2x rubber shaft - Cleaning or sanding brush Length of the sanding belt 3250mm

Condition: reconditioned (used), Functionality: fully functional, Year of construction: 2021, operating hours: 460 h, load capacity: 1,600 kg, lifting height: 4,480 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 80 %, front tire type: SE, rear tire type: SE, Equipment: cabin, lighting, trailer coupling, Electric forklift RX20-16, fully operational new E3 model Year of construction : 2021 Operating hours: approx. 460 h Load capacity : 1.600 KG Dushx Djvb Artozdrot Drive : Electric Battery : 2021 48V incl. capatest Mast : Triplex Overall height : approx. 2,060 mm Lifting frame free lift : approx. 1,500 mm Hydr. auxiliary system : Single Nominal lift height : approx. 4,480 mm Hydraulic actuation : Multi-lever Tires : 4-wheel superelastic black Forks : 1.200 mm Attachment : against surcharge Driver's cab : Cab closed Driver's seat : MSG 65 imitation leather FEM test : New Paint : Refreshed Maintenance : New Lighting : LED work lights front + rear, flashing light / rear

Condition: used, operating hours: 3,610 h, power: 160 kW (217.54 HP), gearing type: automatic, fuel type: diesel, maximum speed: 89 km/h, first registration: 02/2014, color: grey, mileage: 70,871 km, axle configuration: 4x4, driver cabin: other, wheelbase: 3,250 mm, brakes: engine braking, emission class: euro5, fuel: diesel, Equipment: ABS, all wheel drive, crane, fog lights, navigation system, seat heater, second-hand vehicle warranty, * A24 Protective rings for brake callipers * A30 Tire pressure control system (tire-control) * A31 Wheel-side/wheelbase-dependent parts for tire-control. * B42 Trailer brake system, dual line * C34 Anti-slip coating on bumper * C87 Exhaust pipe upwards * D11 Front mounting plate DIN76060 type B, size 3 * D62 Attachment fittings for heavy equipment/crane superstructures * E40 ABS trailer socket 24 V, additional * E41 Trailer socket 24 V, 12-pin * E45 Front socket 24 V, 7-pin * E87 32-pin appliance socket * EU1 Radio-CD unit, aerial, 2 speakers Unimog * F06 Cab roof higher (by 120mm) * F43 Auxiliary heater with engine heating * F64 Tilting fittings for cab * G22 Downshift gearbox with off-road group * G48 Automatic Shift (EAS). * G97 Heat protection plate Transmission Djhewbffbex Dzdrout * H10 Hydraulic system with switch-on valve * H50 Hydraulic plug connection, rear oil supply, 2-way * J08 On-board socket 24V in chassis with C3 signal * L02 Front clearance lights, white. * L18 Halogen fog lights, wattable * L30 Stone guard for headlights * L32 Stone guard for indicators * L35 Headlamp leveling system * L60 Access lights in the access area * LH6 Stone guard, metal for rear lights * MQ4 MB 4-cylinder diesel engine OM924LA, 160KW(218PS) * MS5 BlueTec 5 (Euro 5) * N16 transmission power take-off, fast, with 4-hole flange * Q32 Tail cross member for increased towing capacity * Q97 Trailer coupling with large jaw, ring spring * S07 Swivel seat with air suspension and seat heating, driver * S12 Two-seater passenger seat * S59 Power windows, left and right * W05 Var. speed setting and engine start-stop * Hydraulic hill support 2.45 m wide * Hydraulic Werner frame cable winch M70.1H1 ZW 11 Miscellaneous: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. - .

Condition: used, Functionality: fully functional, Year of construction: 2020, operating hours: 8,759 h, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, drive type: Elektro, Electric 4-Wheel Forklift Mast Type: Duplex Dohx Dzdevc Epqjrjut Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Superelastic Rear Tires Type: Superelastic Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Windshield, Scale,

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Dehjgi Dk Djx Dzdrsut Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: excellent (used), Forza Model 71510 - Boring MILLING HEAD FORZA SOLO MANDRINO 85 mm The single spindle milling head is an essential component in machining operations, specifically designed to be the operational core of a milling head. This device is characterized by its robustness and precision, since it is in charge of holding and rotating the cutting tools, such as milling cutters, drills or reamers, without including the chuck or the milling cutter holders. Its design allows for easy adjustment and tool change, which makes it an essential part in any milling process that requires high precision and efficiency. Manufactured with high quality materials, such as hardened steel, the spindle guarantees the stability of the tools during milling operations, minimizing vibrations and ensuring a high quality finish on the parts being machined. Duohx Dzeu Ndl Iodrot Weight: 26.4 Kg FORZA DRILLING CONES Ref. 714140 / 714150 Trailing cones for milling heads are essential components in machining operations that require superior accuracy and stability. These cones are devices that attach to the milling head and serve to secure the workpiece or cutting tool during the milling process. They are made of high-strength materials, such as hardened steel, and designed to withstand the high cutting forces generated during milling. CLAMP Diameter: 265 mm Inside diameter from edge to edge : 190 mm Distance between points: 108 mm Diameter of points: 13 mm Rim diameter: 35 mm MILLING HEAD FORCE CLAMPS - 14mm / 10 mm / 7 mm

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Useful width 450 mm Outside width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline Dushxed Tidxs Dzdrst PU belt black with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute

Condition: used, mileage: 230,000 km, power: 260 kW (353.50 HP), first registration: 06/2021, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal number: 1003 * MB O 530 LE Citaro * Vehicle FIRST OWNER + Will-registration * Hybrid system * EZ 06/2021 * Diesel * 260 KW / EURO 6 D * ZF Ecolife AP (6-speed) * 39 seats / 64 standing places * AIR CONDITIONING * Major service in August 2024 * Such as oil change, air filter, diesel filter, air dryer cartridge, ... * ALL new V-belts and flat belts * ALL new idler pulleys, track rollers, and tensioners * 6 new tires (front and rear - winter profile - M+S) * Matrix display front / right side - with additional Number display / left side has an extra number display / rear - white LED * USB sockets on the side walls in the passenger compartment * Large TVT monitor - Lawo - available for an additional charge * Mechanical folding ramp * Starting assistant * ESP, ASR * Intelligent eco steering (electro-hydraulic steering) * Full underbody wax * LED daytime running lights * Double-glazed, gray-tinted side windows * LED exterior lights above doors 1 and 2 * Additional compressed air refill connection, rear * NATO socket * HINGED WINDOW * Telematics installation preparation * Fuel consumption display * Destination display with 10-minute run-on time after ignition off * 18 x USB double sockets * Video monitor for monitoring the driver's seat * Rear view camera * Intercom system * Microphone * Sideguard Assist * Driver's seat, Isringhausen NTS2 * Seat heating * Driver's seat climate control * Folding armrests left and right * Driver's cab * Advertising panel on the rear of the driver's cab * Preparation for installation of a ticket printer * KONVEKTA air conditioning system * Driver's work area - additional ventilation * Convector heater Djhx Dewbb Uxezdrout * Auxiliary heater * Electric roof hatches * Extras: Roof wheel insulation * Insulated heating water pipes, return line * LAWO exterior display * etc. * Vehicle in use - mileage and condition may vary. * Construction description available * All information without guarantee * We reserve the right to sell prior to sale * Please refer to our terms and conditions

Condition: used, Functionality: fully functional, Year of construction: 2018, operating hours: 7,600 h, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: standard, construction height: 2,870 mm, drive type: Diesel, Diesel forklift Load centre of gravity: 600 Mast type: Standard Condition: As good as new Dehx Devu I Utezdreut Technical condition: very good Front tyres type: Superelastic Rear tyres type: Superelastic Fork adjustment device, 3rd valve,

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC Delem DA-58T Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor Djhx Dogi Dkyjzdreut - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Dshegih Iuex Dzdrout Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine Duehogi Dlpsx Dzdret - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC OT-41 Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10600.0 kg Tools - Front supports: 2 pcs Dehx Dzjium Dhodrout - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC OT-41 Specifications - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation Duohx Djh Rdvaszdrot - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm Dushx Dzdsipxzpjrst - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2900 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2580-CNC Delem DA-58T Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools Front supports: 2 pcs. Backgauge drive (travel along the X-axis): servo motor Ram drive (travel along the Y-axis): servo motor Backgauge fingers positioning (R-axis): manual Punch quick change tooling system form AMADA DA-58T control One-click program generation Advanced operator support based on algorithms Advanced graphic simulation of bending sequences Included prompts for the operator Algorithms to shorten the production process Automatic crowning calculation High-resolution TFT touchscreen USB interface Top quality components Rexroth hydraulic valve Schneider electrical components Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Dujhoiumyzjx Dzdrst Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: Specify the bending steps for intricate parts. Advise on material and gas selection Assist in the selection of operating parameters for different materials 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site