Used Fordson Power Major for sale (41,992)

Condition: used, Year of construction: 2000, control FIDIA PCN 775 . x-travel 1000 mm y-travel 620 mm z-travel 700 mm Axis 5 Achsen simultan gesteuert Duolq N Nowhqywougst weight 12 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Heraeus Vötsch Type: VT 7010 Air-Cooled Temperature Test Chamber 100 Liter Test Chamber Volume Housing Dimensions: Width 820 mm, Depth 840 mm, Height 1670 mm Internal Dimensions: Width 550 mm, Depth 350 mm, Height 550 mm Djlowhmdroq N Nugeut Temperature Range -70°C to +180°C Temperature Deviation Temporarily ± 1 K Temperature Deviation Spatially ± 2 K Side Feedthrough 80 mm ∅ 80 mm ∅ Refrigerant: R-404A / R-23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power 3.2 kW Rated Current 14.5 A Weight: 260 kg For your safety, please note the following information as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: standard, construction height: 1,335 mm, fork length: 1,200 mm, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, net weight: 1,350 kg, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Dujlq N Nusqynq Regst Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Duslqsvwlqqe N Nugot Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Used machine Used Ganner Compact 30 line boring machine Duelqowhuh So N Nugst Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: used, mileage: 495,157 km, power: 331 kW (450.03 HP), first registration: 07/2021, overall weight: 8,263 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2021, ID: 7732-533813 All our vehicles and the latest offers - Features BigSpace L-cab, Actros model generation 5, wheelbase 3850 mm Engine version Euro VI, D, 449 Hp, 330kW (449hp), 2200 Nm, Batteries 2 x 12 V/220 Ah, low-maintenance Mercedes PowerShift 3 Transmission, High Performance Engine Brake ADR type class AT Tank, 820l+90l AdBlue, left, 735x700x2170 alu., step, Second tank, 430 l, right, 735 x 700 x 1000 mm, alu. Driver comfort Automatic climate control, Power windows, all-round Driver's suspension seat, comfort, Multifunction steering wheel Co-driver's suspension seat, comfort, Armrests on both sides, co-driver's seat Smoker package Auxiliary hot water heater, cab Pull-out refrigerator, under bed Flexible shelving sys.,f. stowage above windscreen, Drawers, under bed, Drawer, under dash support Tilting sunroof, electric, Sunblind, side, driver's side, Sun visor, exterior, transparent Luxury bed, top, narrow, Luxury bed, bottom Technical specifications Dig. tachograph, 2nd gen., working speed control Disc brakes on front and rear axle Electronic braking system with ABS and ASR, Stability Control Assist (ESP) Front spring, 7.5 t, 2-leaf Rear axle - air Tires 315/70R22.5 Drive program fleet, Navigation system Fifth wheel coupling, standard, Jost JSK 37C Axle load measuring device Heat insulation, additional Safety Cruise control Predictive Powertrain Control Lane Keeping Assist, Traffic Sign Assist Attention Assist Active Brake Assist 5 Technology Multimedia Cockpit, interactive, Preinstallation Mercedes-Benz Truck App Portal, Standard loudspeake Truck Data Center 7 FleetBoard Eco Support, Interface, fleet management system FMS Exterior Fully painted cab LED daytime running lamps, Bi-xenon headlamps, Foglamps, halogen Headlamp cleaning system, Side marker lights, Ambient lighting Air deflectors, corner panels, Kerb mirror Front mirror, heated, MirrorCam, MirrorCam switch, on bed Locking system, with central locking, 2 remote control keys Dslq Njwhbynj Nugeut

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Please note: Duolq N Newhqzueuget The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2018, Condition: ready for operation (used), Additional Equipment Djlq N Nuewhgp Isgeut Main Cutting Disc Motor Power (kW): Max 23 kW Number of Pneumatic Clamps on Pusher: Max. 9 Patented Rotating Support Table This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information. Application Types Sawing

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Dujlq N Nueu R Sz Togot Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Djlevn Tg Ijq N Nugjut Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2023, Molding edge banding machine Year of manufacture 2023 with direct gluing to the edging material Workpiece thickness 8 - 50 mm Edge thickness 0.4 - 3 mm Workpiece width min. approx. 30 mm Dslq Njl Ebylo Nugjut Workpiece length min. approx. 200 mm Electrical connection 230 V Total connection 3 kW Heating power glue pool ca. 2,7 kW Pneumatic connection 6 bar inner radius 25 mm (special designs possible) Weight approx. 165 kg Working height approx. 885 mm Dimensions approx. 810 x 610 x 885 mm without foil plate Availability: Short term Storage location: Hochheim

Condition: used, Year of construction: 1988, table width 70 mm ja weight of the machine ca. 115 t +++++ Duslq N Nswhqznougjt Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg Dslq Nsu R S Dhs Nugout - new exhibition machine -

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, Functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. Deleu Thgzsq N Nugeut The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Equipment and technical data: Dimensions and weights Dolq N Nuekwg Unjgeut Length (product) ca. 1170mm Weight (net) approx. 660kg width/depth (product) ca. 1003mm Connection suction Suction port diameter thickness 150mm Installation information Space requirement length 1170mm Machine body width/depth 705mm Space requirement width/depth 1003mm Working area length 1000mm Space requirement height 1197mm Working area width/depth 2000mm Explanation of space requirement The dimensions take into account maximum travels or useful clearance to working area. Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Machine body length 1170mm Thickness Thickness table length 520mm Working height thickness max. 250mm Thickness table width 1000mm working length thickness min. 210mm Working height thickness min. 3.5mm Chip removal max. thickness 8mm Electrical data Power drive motor 7,5kW Mains frequency 50Hz Supply voltage 400V Planer shaft type TERSA Planer shaft speed 4500min¯¹ Planing shaft diameter: 120mm max. planing width: 520mm Number of planing knives: 4pcs. Feeding speed: 5/8/12/18m/min Location: Hochheim Availability: Short term

Condition: used, Year of construction: 1996, 1400 mm table-size 2000 x 1300 mm Motor output 75 kW 1040 mm +++++ Please note: Delq Njwhqy Rs Nugjut The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, Duolou R Sx Esq N Nuget max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: good (used), Year of construction: 2000, operating hours: 32,169 h, Functionality: fully functional, pressing force: 60 t, bale weight: 750 kg, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology with personnel protection system, baling press, bale chute and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor with personnel protection system Duelq N Nuoviwdmogot 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 1 bale chute 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2015, Carpentry plane new device Year of construction 2015 from dissolution The innovative chip ejector with excellent chip removal thanks to increased air flow and innovative air guidance banishes blockages caused by wet wood shavings to the past! Deljr D Tvpsq N Nugout The solid cast construction weighs only 13.2 or 12.5 kg thanks to its consistent lightweight design. The powerful MAFELL alternating current motor offers sufficient reserves. Planing becomes an experience! As with most MAFELL machines, the intelligent control electronics keep watch in the background. For soft start and constant speed under load, as well as for a machine-friendly speed reduction when idling and for overload protection. Scope of delivery 1 reversible blade, 1 pair of carbide steel; order no. No. 091696 1 open-end wrench 8 mm; order no. No. 093258 1 connecting cable 4 m; order no. No. 087323 Planing width 248 mm chip removal 4 mm in cardboard box Technical data chip removal0 - 4 mm Planing shaft Ø74 mm Nominal idle speed8500 1/min Rated power consumption2300 W Universal motor230 V / 50 Hz Planing width Weight18.3 kg Availability: short term Storage location: Hochheim

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, Dolqeu R S Hce N Nugjut work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, Duolq Neu R S Aws Nuget max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting Duolq Nsu R S Dbs Nugst ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, Duolsu R Szteq N Nugjt feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly Djleu R Szajq N Nugeut controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: new, Wide belt sander CASADEI LIBRA 10/95 TC Promotional model from stock -Working table height adjustment with electronic display of the working height -Oscillation of the sanding belts with electronic system -Rubber-coated grooved pressure roller at infeed 1° Position with backstop -Grooved calibration steel roller -Switching the sanding pad on and off from the control panel -Switching the roller on and off from the control panel -Fox 500 KTR electronic control unit -Table extension with 2 rollers in the infeed and outfeed -Automatic table positioning: automatic adjustment of the work Dolq N Nju R S D Uougjut table height automatically via microswitch without correction of the material removalDimensions and dimensions and weights: - Length (product) approx.: 1388 mm - Width/depth (product) approx.: 1545 mm - Height (product) approx.: 1668 mm Suction connection: - Suction nozzle diameter: 140 mm Electrical data: - Power feed motor: 0.33 / 0.55 kW - Drive motor output: 7.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz - Height adjustment motor power: 0.25 kW Sanding unit: - Sanding belt length: 1525 mm - Sanding belt width: 970 mm - Sanding width max.: 950 mm Feed unit: - Feed speed: 4.5 / 9 m/min Workpiece: - Workpiece height min.: 4 mm - Workpiece height max.: 170 mm Subject to prior sale. - new exhibition machine -