Used Glob-Ram Rm110 for sale (3,490)

Condition: used, 01-053-603, KR125/KR2000/KR30HAKR30/60jet, KUKA transport frame Model: 01-053-603 Type: KR125/KR2000/KR30HAKR30/60jet Condition: Used Fgjdpfep Arm Uox Afpjg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 4,000 mm Turning height: 1,400 mm Travel range of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter - external, max.: 4,000 mm Travel range of the cross slide: 850 mm Ram stroke - max.: 950 mm EQUIPMENT - Hydraulic chuck Fgjdpfjzz Rfkox Afpsg - Tool holder CAPTO 6 - Electric handwheel - Retrofit in 2007 INCLUDES Chip conveyor 4-position tool turret DESCRIPTION The machine is in very good condition and was used for hard turning of 4m cylindrical roller bearings. In 2007, the machine underwent mechanical refurbishment by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: used, Year of construction: 1997, Second-hand machine Fgsdpezk Nkdjfx Afpsg Year of manufacture: 1997 Features and technical specifications: Electro-hydraulic drive Vertical press cylinders: 3 Vertical cylinder stroke: approx. 130 mm Vertical cylinders adjustable via a perforated grid Horizontal press cylinders: 2 Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Medium-pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: at short notice Location: 63934 Röllbach

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Fjdpedzqddofx Afpjgg Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Year of construction: 1979, spindle diameter 150 mm x-travel 9500 mm y-travel 2500 mm Control Siemens type 840 C ram: horizontal adjustment 700 mm dimension of the ram 400x400 mm Table load 25000 kg table travel 2500 mm Fgedjyqv Dljpfx Afpjg Table area 2000x2500 mm No. 312007 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Stock of ceramic products from bankruptcy of importer. Fsdjxa Einopfx Afpjgg Originally about 3 full containers. Currently, at least 2 containers/truckload are needed.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 2,800 mm Machining height: 1,000 mm Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter – external, max.: 2,800 mm Spindle speed: 63 min-1 Travel of the cross slide: 620 mm Ram stroke – max.: 690 mm INCLUDES Chip conveyor 4-position tool turret Hydraulic chuck: 2,800 mm EQUIPMENT Tool holder CAPTO 6 Fgodpfx Afszz Rfwspsg Electric handwheel Retrofit in 2009 DESCRIPTION The machine is in very good condition and was used for hard turning of roller bearings. In 2009, the machine underwent a mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Fsdpfxoyrndmo Afpegg Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: ready for operation (used), Siemens Teleperm M 6DS1837-8EA Ram memory module E Stand 2 SN CO960610 used 100% functional Fjdpfx Ajzzh Hfefpegg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 Fgjdpjzuw R Hefx Afpjg - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: used, Kieselgur-Frame 600x600 stainless steel Material: AISI 304 Fedpozzpbdsfx Afpjgg suitable for Seitz Orion A60 and B60 40mm complete with 2 plastic shoes gaskets optional Manufacturer part number: Fs 60485

Condition: excellent (used), Year of construction: 2011, total width: 680 mm, total length: 1,215 mm, total height: 1,730 mm, overall weight: 504 kg, Eckold Kraftformers Piccolo Walter Eckold - KF 324 MACH-ID 9806 Make: Walter Eckold Type: KF 324 Year: 2011 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S FWA 403S   Number of strokes: 400Min. Maximum sheet thickness: 2.0mm Horizontal troath: 340mm Vertical troath: 245mm Fsdpozzwfkjfx Afpjgg Max. thickness Stainles: 1.5mm Max. thickness Aluminium: 2.5mm Motorised ram adjustment: 32 Manuel / Hand ram adjustment:Handwheel Power: 2.0kW Length: 1215mm Width: 680mm Height: 1730mm Weight: 504kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. Fodpfxszgr Iqj Afpsgg WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm Fjdoyuylnjpfx Afpsgg – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: used, Year of construction: 2011, Hankook VTC-160E CNC Ram Type Vertical Turning and Milling Centre with Fanuc 31i-Model A Colour CNC Control, Table dia. 1600mm, Maximum Swing 2000mm, Maximum Turning Dia. 2000mm, Maximum Turning Height 1400mm, Maximum Table Load 10,000kg, Horizontal Travel of Rail Head (X-axis) 1900mm, Vertical Travel of Ram (Z-axis) 900mm, Vertical Travel of Crossrail 700mm, Full C Axis 0.001 Resolution, Milling Spindle 18.5kw, Milling Spindle Speeds 30-3000rpm, Table Speeds. 0.7 to 280rpm (2 Speed Gear Box), Max Table Torque 23800 N.m, Ram Size 220mm x 220mm, Rapid Traverse (X-axis) 7,500mm/min, Rapid Traverse (Z-axis) 7,500mm/min, Cutting Feed Rate 0.001mm to 7500mm/rev, Tool Magazine 24 Station (12 Std + 12 Milling), Main Motor 45kw, Total Machine Power requirement 100KVa, Machine Size 5300mm x 4500mm, Machine Weight 34,000kg, Assorted Tool Holders. S/No. 42D09215 (2011). Country of Origin: Korea Pre-Auction offers Encouraged Fodpfx Aezwnqcsfpsgg Location: These lots are located in Oldbury, West Midlands, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, mileage: 882,005 km, power: 338 kW (459.55 HP), first registration: 04/2016, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Fsdpfoyx Utpox Afpjgg Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: Volvo

Condition: excellent (used), Year of construction: 2015, 📌 Glass Processing Center – DENVER Krea / Krea Fit (CNC) General Description: A professional 3-axis CNC glass processing center by DENVER – model Krea (also commonly known as Krea Fit), designed for comprehensive processing of flat glass. The machine combines functions such as grinding, milling, drilling, edge shaping, and polishing, making it an ideal solution for glassworks, window manufacturers, producers of decorative elements, and appliance (white goods) manufacturers. ⸻ 🛠️ Technical Features and Functions 🔹 CNC Construction: 3 interpolated axes ensure precise tool guidance and high processing quality. 🔹 Spindle: powerful electrospindle with a power rating of approx. 6.6–9 kW (S6), optimized for glass working. 🔹 Automatic Tool Changer: 14-position tool magazine (standard), which speeds up operations and increases work flexibility. 🔹 CAD-CAM & CNC Control: an intuitive CNC control system with CAD-CAM support simplifies programming and 2D/3D model processing. 🔹 Automation: can be equipped with an integrated automatic loading and unloading system, handling trolley, and robot for glass sheet handling. 🔹 Vacuum Kit: additional vacuum tank and distributor for stable glass clamping during processing. 🔹 Helpful Accessories Included:  • various vacuum suction cups,  • tool sets, Fedpfx Aey Edlbefpjgg  • reverse osmosis system (e.g. IDROTECNICA IDRO RO 130 ST),  • tanks and auxiliary equipment. ⸻ Kdsboyk Dx Dsludqncok 📏 Working Range ✅ Supported Materials: flat glass of various thicknesses (typically from a few mm up to approx. 25 mm – depending on tool configuration and program). ✅ Possible Operations:  • edge grinding,  • drilling and milling holes,  • beveling and rounding edges,  • engraving and cutting shapes

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 1102, I will sell a TENON spacer frame bender. It has a Polish menu, the bender is in very good condition, in constant use. It has a Polish menu. Fgodpfewp Szlex Afpog

Year of construction: 2018, condition: good (used), Loading ramps, Butt, BKV 614, 6 tons, non-movable – used: Price at location: now only €7,500 instead of €9,500 (net) Manufacturer: Butt Type: BKV 614 Year of manufacture: 2018 Load capacity: 6,000 kg Driveway with grating Length: approx. 14.41 m Width: approx. 2.88 m Width with stairs: approx. 3.73 m Width of the driveway: approx. 2.77 m Height of the ramp: 1.28 m (where the plates rest on the truck loading ramp of the building) The ramp is not mobile – or rather, not movable! Condition: very good Available: immediately or August 2026 Location: Euskirchen Fgodpfszikbzox Afpog

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, height adjustment type: hydraulic, input voltage: 380 V, passage height: 230 mm, We are offering these two refurbished Wintersteiger DSG 150 ECO frame saws, year of manufacture 2004. Machine type: DSG 150 ECO Voltage: 380 V Power: 11 kW each Included free of charge is a Tensionmaster for crowning the blades and a set of blades valued at €2,000. Fjdpoydfgcsfx Afpegg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2005, X AXIS TRAVEL: 10000 MM Y AXIS TRAVEL: 4000 MM Z AXIS TRAVEL (RAM): 1000 MM W AXIS TRAVEL (SPINDLE): 800 MM TOTAL Z + W AXIS TRAVEL: 1800 MM SPINDLE DIAMETER 160 MM SPINDLE MOTOR POWER 40 KW SPINDLE RPM: 3000 RPM SPINDLE TAPER ISO 50 DIN 69871/1A NR 02 SPEED RANGE RAM DIMENSIONS: 460 X 520 MM RAPID FEEDING 20000 MM/MIN ROTARY TRANSLATION TABLE MODEL MG 50 OF 2500 x 3500 mm , load 50 ton , 360000 position 0,001° stroke 2000 mm HEIDENHAIN iTNC 530 CNC Fgjdpfjup Dclox Afpog TOOL CHANGER 40 PLACES MANUAL UNIVERSAL HEAD ANCHOR PLATE 6000 X 2000 X 300 MM EXTERNAL REFRIGERATION TOTAL INSTALLED POWER 110 KVA YEAR : 2005

Condition: used, Year of construction: 1963, total length: 2,300 mm, total width: 1,500 mm, total height: 2,880 mm, Empty weight: 8.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: 12691 - Drive system: Conventional - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fsdpfx Ajwmfrrjfpjgg Lukas van Rossum

Condition: used, functionality: fully functional, color channels: 1, resolution (max.): 1,200 dpi, paper weight (min.): 60 g/m², paper weight (max.): 110 g/m², paper width (min.): 297 mm, paper width (max.): 914 mm, paper height (min.): 419 mm, paper height (max.): 176 mm, number of feeding trays: 2, total length: 1,720 mm, total width: 800 mm, total height: 1,470 mm, input current: 6 A, input voltage: 230 V, Océ PlotWave 360 – Professional A0 multifunction plotter with color scanner and Estefold folder professional black and white printing; maximum format A0 / 36" / 914 mm; speed up to 6 A1 prints per minute; print resolution up to 600 × 1200 dpi; large-format CIS color scanner; scanner resolution up to 600 × 600 dpi; scanning of originals up to 914 mm wide; scan formats: PDF, PDF/A, TIFF, and JPEG; Océ ClearConnect touchscreen display; Fgjdpfx Afjzy Em Hspeg Ethernet network connection; controller with 4 GB RAM and 500 GB hard disk; roll paper feed; complete with automatic Estefold folder for folding drawings, technical plans, and projects; also included in the sale are rolls of printing paper, provided as standard equipment/consumables.

Condition: used, Year of construction: 1983, machine/vehicle number: HL 2100 5083044, Working area: 3000 x 2250 mm (length x height) 3 vertical pressure bars Fodezl Rugspfx Afpogg 2 horizontal pressure bars Electric height and width adjustment with automatic sensing Machine in good condition.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Hydraulic Frame Press HESS LUX 2000 The machine is fully operational and in good condition Maximum working dimensions: 4300 x 2600 mm 3 top and 3 side cylinders Electric dimension adjustment from the control panel. Fgjdpexl Dv Djfx Afpsg